All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Jiri Slaby <jirislaby@gmail.com>, Alan Cox <alan@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 08/79] cyclades: add tty refcounting
Date: Sat, 19 Sep 2009 14:36:13 -0700	[thread overview]
Message-ID: <1253396244-7885-8-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20090919213345.GB7668@kroah.com>

From: Jiri Slaby <jirislaby@gmail.com>

While this is not problem for Y card handlers (they are protected
by card_lock), Z handlers and other functions may dereference NULL
at any point after hangup/close. Even if (tty == NULL) was already
performed in the handler.

Note that it's not an issue for Y cards just for now. After
switching to tty_port_close_* et al. this will be a problem. So
add refcounting to them all.

Also proc .show doesn't take a tty reference and it should (along
with a ldisc one).

While at it and changing prototypes (adding tty param), prepend
cy_ to functions which don't have it yet.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/cyclades.c |  172 +++++++++++++++++++++++++---------------------
 1 files changed, 93 insertions(+), 79 deletions(-)

diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 2dafc2d..e2f731b 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -850,7 +850,7 @@ MODULE_DEVICE_TABLE(pci, cy_pci_dev_id);
 #endif
 
 static void cy_start(struct tty_struct *);
-static void set_line_char(struct cyclades_port *);
+static void cy_set_line_char(struct cyclades_port *, struct tty_struct *);
 static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32);
 #ifdef CONFIG_ISA
 static unsigned detect_isa_irq(void __iomem *);
@@ -1011,8 +1011,9 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 	save_car = readb(base_addr + (CyCAR << index));
 	cy_writeb(base_addr + (CyCAR << index), save_xir);
 
+	tty = tty_port_tty_get(&info->port);
 	/* if there is nowhere to put the data, discard it */
-	if (info->port.tty == NULL) {
+	if (tty == NULL) {
 		if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
 				CyIVRRxEx) {	/* exception */
 			data = readb(base_addr + (CyRDSR << index));
@@ -1024,7 +1025,6 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 		goto end;
 	}
 	/* there is an open port for this data */
-	tty = info->port.tty;
 	if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
 			CyIVRRxEx) {	/* exception */
 		data = readb(base_addr + (CyRDSR << index));
@@ -1041,6 +1041,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 
 		if (data & info->ignore_status_mask) {
 			info->icount.rx++;
+			tty_kref_put(tty);
 			return;
 		}
 		if (tty_buffer_request_room(tty, 1)) {
@@ -1121,6 +1122,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 		info->idle_stats.recv_idle = jiffies;
 	}
 	tty_schedule_flip(tty);
+	tty_kref_put(tty);
 end:
 	/* end of service */
 	cy_writeb(base_addr + (CyRIR << index), save_xir & 0x3f);
@@ -1131,6 +1133,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 		void __iomem *base_addr)
 {
 	struct cyclades_port *info;
+	struct tty_struct *tty;
 	int char_count, index = cinfo->bus_index;
 	u8 save_xir, channel, save_car, outch;
 
@@ -1154,7 +1157,8 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 		goto end;
 	}
 	info = &cinfo->ports[channel + chip * 4];
-	if (info->port.tty == NULL) {
+	tty = tty_port_tty_get(&info->port);
+	if (tty == NULL) {
 		cy_writeb(base_addr + (CySRER << index),
 			  readb(base_addr + (CySRER << index)) & ~CyTxRdy);
 		goto end;
@@ -1205,7 +1209,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 					~CyTxRdy);
 			goto done;
 		}
-		if (info->port.tty->stopped || info->port.tty->hw_stopped) {
+		if (tty->stopped || tty->hw_stopped) {
 			cy_writeb(base_addr + (CySRER << index),
 				readb(base_addr + (CySRER << index)) &
 					~CyTxRdy);
@@ -1241,7 +1245,8 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 	}
 
 done:
-	tty_wakeup(info->port.tty);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 end:
 	/* end of service */
 	cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f);
@@ -1252,6 +1257,7 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 		void __iomem *base_addr)
 {
 	struct cyclades_port *info;
+	struct tty_struct *tty;
 	int index = cinfo->bus_index;
 	u8 save_xir, channel, save_car, mdm_change, mdm_status;
 
@@ -1265,7 +1271,8 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 	mdm_change = readb(base_addr + (CyMISR << index));
 	mdm_status = readb(base_addr + (CyMSVR1 << index));
 
-	if (!info->port.tty)
+	tty = tty_port_tty_get(&info->port);
+	if (!tty)
 		goto end;
 
 	if (mdm_change & CyANY_DELTA) {
@@ -1284,27 +1291,27 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 
 	if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) {
 		if (!(mdm_status & CyDCD)) {
-			tty_hangup(info->port.tty);
+			tty_hangup(tty);
 			info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 		}
 		wake_up_interruptible(&info->port.open_wait);
 	}
 	if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
-		if (info->port.tty->hw_stopped) {
+		if (tty->hw_stopped) {
 			if (mdm_status & CyCTS) {
 				/* cy_start isn't used
 				   because... !!! */
-				info->port.tty->hw_stopped = 0;
+				tty->hw_stopped = 0;
 				cy_writeb(base_addr + (CySRER << index),
 					readb(base_addr + (CySRER << index)) |
 						CyTxRdy);
-				tty_wakeup(info->port.tty);
+				tty_wakeup(tty);
 			}
 		} else {
 			if (!(mdm_status & CyCTS)) {
 				/* cy_stop isn't used
 				   because ... !!! */
-				info->port.tty->hw_stopped = 1;
+				tty->hw_stopped = 1;
 				cy_writeb(base_addr + (CySRER << index),
 					readb(base_addr + (CySRER << index)) &
 						~CyTxRdy);
@@ -1315,6 +1322,7 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 	}
 	if (mdm_change & CyRI) {
 	}*/
+	tty_kref_put(tty);
 end:
 	/* end of service */
 	cy_writeb(base_addr + (CyMIR << index), save_xir & 0x3f);
@@ -1449,11 +1457,10 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
 	return 0;
 }				/* cyz_issue_cmd */
 
-static void cyz_handle_rx(struct cyclades_port *info,
+static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty,
 		struct BUF_CTRL __iomem *buf_ctrl)
 {
 	struct cyclades_card *cinfo = info->card;
-	struct tty_struct *tty = info->port.tty;
 	unsigned int char_count;
 	int len;
 #ifdef BLOCKMOVE
@@ -1542,11 +1549,10 @@ static void cyz_handle_rx(struct cyclades_port *info,
 	}
 }
 
-static void cyz_handle_tx(struct cyclades_port *info,
+static void cyz_handle_tx(struct cyclades_port *info, struct tty_struct *tty,
 		struct BUF_CTRL __iomem *buf_ctrl)
 {
 	struct cyclades_card *cinfo = info->card;
-	struct tty_struct *tty = info->port.tty;
 	u8 data;
 	unsigned int char_count;
 #ifdef BLOCKMOVE
@@ -1642,7 +1648,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 		special_count = 0;
 		delta_count = 0;
 		info = &cinfo->ports[channel];
-		tty = info->port.tty;
+		tty = tty_port_tty_get(&info->port);
 		if (tty == NULL)
 			continue;
 
@@ -1674,7 +1680,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 						C_RS_DCD) {
 					wake_up_interruptible(&info->port.open_wait);
 				} else {
-					tty_hangup(info->port.tty);
+					tty_hangup(tty);
 					wake_up_interruptible(&info->port.open_wait);
 					info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 				}
@@ -1706,7 +1712,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
 					"port %ld\n", info->card, channel);
 #endif
-			cyz_handle_rx(info, buf_ctrl);
+			cyz_handle_rx(info, tty, buf_ctrl);
 			break;
 		case C_CM_TXBEMPTY:
 		case C_CM_TXLOWWM:
@@ -1716,7 +1722,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
 					"port %ld\n", info->card, channel);
 #endif
-			cyz_handle_tx(info, buf_ctrl);
+			cyz_handle_tx(info, tty, buf_ctrl);
 			break;
 #endif				/* CONFIG_CYZ_INTR */
 		case C_CM_FATAL:
@@ -1729,6 +1735,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			wake_up_interruptible(&info->delta_msr_wait);
 		if (special_count)
 			tty_schedule_flip(tty);
+		tty_kref_put(tty);
 	}
 }
 
@@ -1774,7 +1781,6 @@ static void cyz_poll(unsigned long arg)
 {
 	struct cyclades_card *cinfo;
 	struct cyclades_port *info;
-	struct tty_struct *tty;
 	struct FIRM_ID __iomem *firm_id;
 	struct ZFW_CTRL __iomem *zfw_ctrl;
 	struct BUF_CTRL __iomem *buf_ctrl;
@@ -1802,13 +1808,19 @@ static void cyz_poll(unsigned long arg)
 		cyz_handle_cmd(cinfo);
 
 		for (port = 0; port < cinfo->nports; port++) {
+			struct tty_struct *tty;
+
 			info = &cinfo->ports[port];
-			tty = info->port.tty;
 			buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
 
+			tty = tty_port_tty_get(&info->port);
+			/* OK to pass NULL to the handle functions below.
+			   They need to drop the data in that case. */
+
 			if (!info->throttle)
-				cyz_handle_rx(info, buf_ctrl);
-			cyz_handle_tx(info, buf_ctrl);
+				cyz_handle_rx(info, tty, buf_ctrl);
+			cyz_handle_tx(info, tty, buf_ctrl);
+			tty_kref_put(tty);
 		}
 		/* poll every 'cyz_polling_cycle' period */
 		expires = jiffies + cyz_polling_cycle;
@@ -1824,7 +1836,7 @@ static void cyz_poll(unsigned long arg)
 /* This is called whenever a port becomes active;
    interrupts are enabled and DTR & RTS are turned on.
  */
-static int startup(struct cyclades_port *info)
+static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
@@ -1848,8 +1860,7 @@ static int startup(struct cyclades_port *info)
 	}
 
 	if (!info->type) {
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		free_page(page);
 		goto errout;
 	}
@@ -1861,7 +1872,7 @@ static int startup(struct cyclades_port *info)
 
 	spin_unlock_irqrestore(&card->card_lock, flags);
 
-	set_line_char(info);
+	cy_set_line_char(info, tty);
 
 	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
@@ -1900,8 +1911,7 @@ static int startup(struct cyclades_port *info)
 			readb(base_addr + (CySRER << index)) | CyRxData);
 		info->port.flags |= ASYNC_INITIALIZED;
 
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 		info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 		info->breakon = info->breakoff = 0;
 		memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
@@ -1984,8 +1994,7 @@ static int startup(struct cyclades_port *info)
 		/* enable send, recv, modem !!! */
 
 		info->port.flags |= ASYNC_INITIALIZED;
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 		info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 		info->breakon = info->breakoff = 0;
 		memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
@@ -2047,7 +2056,7 @@ static void start_xmit(struct cyclades_port *info)
  * This routine shuts down a serial port; interrupts are disabled,
  * and DTR is dropped if the hangup on close termio flag is on.
  */
-static void shutdown(struct cyclades_port *info)
+static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
@@ -2083,7 +2092,7 @@ static void shutdown(struct cyclades_port *info)
 			free_page((unsigned long)temp);
 		}
 		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
+		if (tty->termios->c_cflag & HUPCL) {
 			cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
 			cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
 #ifdef CY_DEBUG_DTR
@@ -2097,8 +2106,7 @@ static void shutdown(struct cyclades_port *info)
 		/* it may be appropriate to clear _XMIT at
 		   some later date (after testing)!!! */
 
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		info->port.flags &= ~ASYNC_INITIALIZED;
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	} else {
@@ -2132,7 +2140,7 @@ static void shutdown(struct cyclades_port *info)
 			free_page((unsigned long)temp);
 		}
 
-		if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
+		if (tty->termios->c_cflag & HUPCL) {
 			cy_writel(&ch_ctrl[channel].rs_control,
 				(__u32)(readl(&ch_ctrl[channel].rs_control) &
 					~(C_RS_RTS | C_RS_DTR)));
@@ -2147,8 +2155,7 @@ static void shutdown(struct cyclades_port *info)
 #endif
 		}
 
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		info->port.flags &= ~ASYNC_INITIALIZED;
 
 		spin_unlock_irqrestore(&card->card_lock, flags);
@@ -2436,7 +2443,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
 #endif
 	tty->driver_data = info;
-	info->port.tty = tty;
 	if (serial_paranoia_check(info, tty->name, "cy_open"))
 		return -ENODEV;
 
@@ -2462,7 +2468,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	/*
 	 * Start up serial port
 	 */
-	retval = startup(info);
+	retval = cy_startup(info, tty);
 	if (retval)
 		return retval;
 
@@ -2476,6 +2482,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	}
 
 	info->throttle = 0;
+	tty_port_tty_set(&info->port, tty);
 
 #ifdef CY_DEBUG_OPEN
 	printk(KERN_DEBUG "cyc:cy_open done\n");
@@ -2705,13 +2712,13 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 	}
 
 	spin_unlock_irqrestore(&card->card_lock, flags);
-	shutdown(info);
+	cy_shutdown(info, tty);
 	cy_flush_buffer(tty);
 	tty_ldisc_flush(tty);
 	spin_lock_irqsave(&card->card_lock, flags);
 
 	tty->closing = 0;
-	info->port.tty = NULL;
+	tty_port_tty_set(&info->port, NULL);
 	if (info->port.blocked_open) {
 		spin_unlock_irqrestore(&card->card_lock, flags);
 		if (info->port.close_delay) {
@@ -2957,7 +2964,7 @@ static void cyy_baud_calc(struct cyclades_port *info, __u32 baud)
  * This routine finds or computes the various line characteristics.
  * It used to be called config_setup
  */
-static void set_line_char(struct cyclades_port *info)
+static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
@@ -2967,28 +2974,26 @@ static void set_line_char(struct cyclades_port *info)
 	int baud, baud_rate = 0;
 	int i;
 
-	if (!info->port.tty || !info->port.tty->termios)
+	if (!tty->termios) /* XXX can this happen at all? */
 		return;
 
 	if (info->line == -1)
 		return;
 
-	cflag = info->port.tty->termios->c_cflag;
-	iflag = info->port.tty->termios->c_iflag;
+	cflag = tty->termios->c_cflag;
+	iflag = tty->termios->c_iflag;
 
 	/*
 	 * Set up the tty->alt_speed kludge
 	 */
-	if (info->port.tty) {
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			info->port.tty->alt_speed = 57600;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			info->port.tty->alt_speed = 115200;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			info->port.tty->alt_speed = 230400;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			info->port.tty->alt_speed = 460800;
-	}
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+		tty->alt_speed = 57600;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+		tty->alt_speed = 115200;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+		tty->alt_speed = 230400;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+		tty->alt_speed = 460800;
 
 	card = info->card;
 	channel = info->line - card->first_line;
@@ -2998,7 +3003,7 @@ static void set_line_char(struct cyclades_port *info)
 		index = card->bus_index;
 
 		/* baud rate */
-		baud = tty_get_baud_rate(info->port.tty);
+		baud = tty_get_baud_rate(tty);
 		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
 				ASYNC_SPD_CUST) {
 			if (info->custom_divisor)
@@ -3123,9 +3128,8 @@ static void set_line_char(struct cyclades_port *info)
 
 		/* set line characteristics  according configuration */
 
-		cy_writeb(base_addr + (CySCHR1 << index),
-			  START_CHAR(info->port.tty));
-		cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->port.tty));
+		cy_writeb(base_addr + (CySCHR1 << index), START_CHAR(tty));
+		cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(tty));
 		cy_writeb(base_addr + (CyCOR1 << index), info->cor1);
 		cy_writeb(base_addr + (CyCOR2 << index), info->cor2);
 		cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
@@ -3141,7 +3145,7 @@ static void set_line_char(struct cyclades_port *info)
 			(info->default_timeout ? info->default_timeout : 0x02));
 		/* 10ms rx timeout */
 
-		if (C_CLOCAL(info->port.tty)) {
+		if (C_CLOCAL(tty)) {
 			/* without modem intr */
 			cy_writeb(base_addr + (CySRER << index),
 				readb(base_addr + (CySRER << index)) | CyMdmCh);
@@ -3204,8 +3208,7 @@ static void set_line_char(struct cyclades_port *info)
 #endif
 		}
 
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 
 	} else {
@@ -3224,7 +3227,7 @@ static void set_line_char(struct cyclades_port *info)
 		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
 
 		/* baud rate */
-		baud = tty_get_baud_rate(info->port.tty);
+		baud = tty_get_baud_rate(tty);
 		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
 				ASYNC_SPD_CUST) {
 			if (info->custom_divisor)
@@ -3335,8 +3338,7 @@ static void set_line_char(struct cyclades_port *info)
 				"was %x\n", info->line, retval);
 		}
 
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 	}
 }				/* set_line_char */
 
@@ -3365,7 +3367,7 @@ get_serial_info(struct cyclades_port *info,
 }				/* get_serial_info */
 
 static int
-set_serial_info(struct cyclades_port *info,
+cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 		struct serial_struct __user *new_info)
 {
 	struct serial_struct new_serial;
@@ -3403,10 +3405,10 @@ set_serial_info(struct cyclades_port *info,
 
 check_and_exit:
 	if (info->port.flags & ASYNC_INITIALIZED) {
-		set_line_char(info);
+		cy_set_line_char(info, tty);
 		return 0;
 	} else {
-		return startup(info);
+		return cy_startup(info, tty);
 	}
 }				/* set_serial_info */
 
@@ -3955,7 +3957,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		ret_val = get_serial_info(info, argp);
 		break;
 	case TIOCSSERIAL:
-		ret_val = set_serial_info(info, argp);
+		ret_val = cy_set_serial_info(info, tty, argp);
 		break;
 	case TIOCSERGETLSR:	/* Get line status register */
 		ret_val = get_lsr_info(info, argp);
@@ -4055,7 +4057,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line);
 #endif
 
-	set_line_char(info);
+	cy_set_line_char(info, tty);
 
 	if ((old_termios->c_cflag & CRTSCTS) &&
 			!(tty->termios->c_cflag & CRTSCTS)) {
@@ -4299,13 +4301,13 @@ static void cy_hangup(struct tty_struct *tty)
 		return;
 
 	cy_flush_buffer(tty);
-	shutdown(info);
+	cy_shutdown(info, tty);
 	info->port.count = 0;
 #ifdef CY_DEBUG_COUNT
 	printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n",
 		current->pid);
 #endif
-	info->port.tty = NULL;
+	tty_port_tty_set(&info->port, NULL);
 	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 	wake_up_interruptible(&info->port.open_wait);
 }				/* cy_hangup */
@@ -5191,18 +5193,30 @@ static int cyclades_proc_show(struct seq_file *m, void *v)
 		for (j = 0; j < cy_card[i].nports; j++) {
 			info = &cy_card[i].ports[j];
 
-			if (info->port.count)
+			if (info->port.count) {
+				/* XXX is the ldisc num worth this? */
+				struct tty_struct *tty;
+				struct tty_ldisc *ld;
+				int num = 0;
+				tty = tty_port_tty_get(&info->port);
+				if (tty) {
+					ld = tty_ldisc_ref(tty);
+					if (ld) {
+						num = ld->ops->num;
+						tty_ldisc_deref(ld);
+					}
+					tty_kref_put(tty);
+				}
 				seq_printf(m, "%3d %8lu %10lu %8lu "
-					"%10lu %8lu %9lu %6ld\n", info->line,
+					"%10lu %8lu %9lu %6d\n", info->line,
 					(cur_jifs - info->idle_stats.in_use) /
 					HZ, info->idle_stats.xmit_bytes,
 					(cur_jifs - info->idle_stats.xmit_idle)/
 					HZ, info->idle_stats.recv_bytes,
 					(cur_jifs - info->idle_stats.recv_idle)/
 					HZ, info->idle_stats.overruns,
-					/* FIXME: double check locking */
-					(long)info->port.tty->ldisc->ops->num);
-			else
+					num);
+			} else
 				seq_printf(m, "%3d %8lu %10lu %8lu "
 					"%10lu %8lu %9lu %6ld\n",
 					info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
-- 
1.6.4.2


  parent reply	other threads:[~2009-09-19 21:38 UTC|newest]

Thread overview: 86+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-09-19 21:33 [GIT PATCH] TTY patches for 2.6.31-git Greg KH
2009-09-19 21:36 ` [PATCH 01/79] tty: gigaset: really fix chars_in_buffer Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 02/79] serial: bfin_5xx: fix building as module when early printk is enabled Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 03/79] tty: serial/pcmcia: add ID for Advantech card Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 04/79] tty-ldisc: make /proc/tty/ldiscs use ldisc_ops instead of ldiscs Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 05/79] tty-ldisc: get rid of tty_ldisc_try_get() helper function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 06/79] tty: includecheck fix: drivers/char, vt.c Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 07/79] tty: icom: bit and/or confusion? Greg Kroah-Hartman
2009-09-19 21:36 ` Greg Kroah-Hartman [this message]
2009-09-19 21:36 ` [PATCH 09/79] cyclades: remove block_til_ready Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 10/79] cyclades: avoid addresses recomputation Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 11/79] cyclades: switch to tty_port_hangup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 12/79] cyclades: close cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 13/79] cyclades: overall cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 14/79] cyclades: sleep instead busy-wait Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 15/79] cyclades: use dtr_rts helpers Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 16/79] cyclades: merge cy_startup tails Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 17/79] cyclades: ioctls cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 18/79] cyclades: tiocm cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 19/79] cyclades: introduce cyy_readb/writeb Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 20/79] cyclades: remove more duplicated code Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 21/79] slip: Clean up create and destroy Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 22/79] kfifo: Use "const" definitions Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 23/79] MOS7720 has no tiocmget method Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 24/79] tty: usb_serial_mos7720: Fix get_lsr_info Greg Kroah-Hartman
2010-01-26 11:08   ` Kees Schoenmakers
2010-01-26 11:09   ` Kees Schoenmakers
2009-09-19 21:36 ` [PATCH 25/79] tty: Fix a typo noted in passing Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 26/79] mos7840: remove old dead modem logic Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 27/79] serial: 8250: add IRQ trigger support Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 28/79] 8250: Now honours baud rate lower bounds Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 29/79] tty: Add a full port_close function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 30/79] riscom8: split open and close methods up Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 31/79] mxser: Split close ready for a standard tty_port_close method Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 32/79] isicom: Split the close hardware bits out Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 33/79] tty: riscom8 kref and tty_port_close Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 34/79] cyclades: use the full port_close function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 35/79] tty: make the kref destructor occur asynchronously Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 36/79] cdc_acm: Fix to use modern speed interfaces Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 37/79] tty: USB hangup is racy Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 38/79] tty: remove dtr/rts use from the driver open methods Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 39/79] tty: USB can now use the shutdown method for kref based freeing of ports Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 40/79] vt: add an event interface Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 41/79] vt: remove power stuff from kernel/power Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 42/79] vt: move kernel stuff out of vt.h Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 43/79] vt: add an activate and lock Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 44/79] tty: USB does not need the filp argument in the drivers Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 45/79] isicom: split the open method for the isicom device Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 46/79] serial: kill off uart_info Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 47/79] serial: Fold closing_* fields into the tty_port ones Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 48/79] serial: use tty_port pointers in the core code Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 49/79] serial: move count into the tty_port version Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 50/79] serial: move the flags into the tty_port field Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 51/79] serial: kill off uif_t Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 52/79] serial: replace the state mutex with the tty port mutex Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 53/79] serial: move delta_msr_wait into the tty_port Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 54/79] serial: move port users helper Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 55/79] serial: kill USF_CLOSING_* definitions Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 56/79] serial: introduce tty krefs Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 57/79] Set proper console speed on resume if console suspend is disabled Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 58/79] tty: USB serial termios bits Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 59/79] n_tty: honor opost flag for echoes Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 60/79] n_tty: move echoctl check and clean up logic Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 61/79] tty: handle VT specific compat ioctls in vt driver Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 62/79] tty: vt: use printk_once Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 63/79] tty: Power: fix suspend vt regression Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 64/79] TTY: fix typos Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 65/79] tty: riscom8, fix shutdown declaration Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 66/79] tty: riscom8, fix tty refcnt Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 67/79] tty: USB: serial/mct_u232, " Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 68/79] uartlite: support shared interrupt lines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 69/79] tty: Char: mxser, add support for CP112UL Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 70/79] tty: Char: mxser, use THRE for ASPP_OQUEUE ioctl Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 71/79] usb-serial: change referencing of port and serial structures Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 72/79] usb-serial: put subroutines in logical order Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 73/79] usb-serial: change logic of serial lookups Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 74/79] usb-serial: acquire references when a new tty is installed Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 75/79] usb-serial: fix termios initialization logic Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 76/79] usb-serial: rename subroutines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 77/79] usb-serial: add missing tests and debug lines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 78/79] usb-serial: straighten out serial_open Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 79/79] USB serial: update the console driver Greg Kroah-Hartman
2009-09-30 10:09 ` [origin tree boot crash] Re: [GIT PATCH] TTY patches for 2.6.31-git Ingo Molnar
2009-09-30 10:17   ` Alan Cox
2009-10-01  8:21     ` Ingo Molnar
2009-10-01 10:36       ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1253396244-7885-8-git-send-email-gregkh@suse.de \
    --to=gregkh@suse.de \
    --cc=alan@linux.intel.com \
    --cc=jirislaby@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.