From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/4] mx5: Optimize lowlevel_init for TO 3
Date: Mon, 20 Aug 2012 12:12:34 +0200 (CEST) [thread overview]
Message-ID: <125633220.2578056.1345457554652.JavaMail.root@advansee.com> (raw)
In-Reply-To: <5031F354.5030307@denx.de>
Hi Stefano,
> On 14/08/2012 17:19, Beno?t Th?baudeau wrote:
> > The mx5 lowlevel_init.S contains code that detects the silicon
> > revision at
> > runtime, and that behaves differently if a silicon revision older
> > than TO 3 is
> > detected. This code is useless for recently designed boards that
> > may not be
> > fitted with older silicon revisions. Hence, this patch adds an
> > option to
> > optimize away this revision-specific code from lowlevel_init.S.
> >
> > Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> > Cc: Stefano Babic <sbabic@denx.de>
> > ---
>
> Hi Beno?t,
>
> > Changes for v2:
> > - Make patch description more detailed.
> >
> > .../arch/arm/cpu/armv7/mx5/lowlevel_init.S | 4 ++--
> > .../doc/README.imx5 | 7 ++++++-
> > 2 files changed, 8 insertions(+), 3 deletions(-)
> >
>
> The ROM revision is currently detected at run time - because this
> does
> not fix an evident bug, your patch intends to reduce the footprint.
>
> Then I chacked on a mx51evk, a board thet was shipped by Freescale
> with
> TO 2 (and maybe TO 1 ?), and there are surely samples with TO2 or TO3
> in
> the world.
>
> Without the poatch:
>
> Configuring for mx51evk - Board: mx51evk, Options:
> IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
> text data bss dec hex filename
> 258168 15872 268464 542504 84728 ./u-boot
>
> With the patch:
>
> Configuring for mx51evk - Board: mx51evk, Options:
> IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
> text data bss dec hex filename
> 258140 15872 268492 542504 84728 ./u-boot
>
> We win only 28 bytes - on the other side, we had a CONFIG_ that is
> not
> so clear how to be used, mainly if a board as the mx51evk was shipped
> with both versions.
To make things easier, this config should be used only for boards always shipped
with the newer versions.
> I think the advantages are negligible here.
Indeed. I needed that for a specific case where any single byte was worth
saving. For upstream U-Boot, I let you decide if this is interesting enough or
not.
Best regards,
Beno?t
next prev parent reply other threads:[~2012-08-20 10:12 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-14 14:43 [U-Boot] [PATCH 1/4] mx5: cosmetic: Clean up lowlevel_init Benoît Thébaudeau
2012-08-14 14:44 ` [U-Boot] [PATCH 2/4] mx5: Optimize lowlevel_init code size Benoît Thébaudeau
2012-08-14 14:52 ` Otavio Salvador
2012-08-14 15:19 ` [U-Boot] [PATCH v2 " Benoît Thébaudeau
2012-09-30 12:47 ` Stefano Babic
2012-09-30 12:49 ` Stefano Babic
2012-08-14 14:44 ` [U-Boot] [PATCH 3/4] mx5: Optimize lowlevel_init for TO 3 Benoît Thébaudeau
2012-08-14 14:56 ` Otavio Salvador
2012-08-14 15:19 ` [U-Boot] [PATCH v2 " Benoît Thébaudeau
2012-08-20 8:20 ` Stefano Babic
2012-08-20 10:12 ` Benoît Thébaudeau [this message]
2012-08-14 14:44 ` [U-Boot] [PATCH 4/4] mx5: Mark lowlevel_init board-specific code Benoît Thébaudeau
2012-08-15 14:34 ` Benoît Thébaudeau
2012-11-05 20:07 ` [U-Boot] [PATCH v2] " Benoît Thébaudeau
2012-11-07 14:29 ` Stefano Babic
2012-11-16 22:42 ` Benoît Thébaudeau
2012-11-19 7:42 ` Stefano Babic
2012-11-19 7:57 ` Stefano Babic
2012-08-14 14:51 ` [U-Boot] [PATCH 1/4] mx5: cosmetic: Clean up lowlevel_init Otavio Salvador
2012-08-14 15:18 ` [U-Boot] [PATCH v2 " Benoît Thébaudeau
2012-08-17 11:41 ` Stefano Babic
2012-08-20 7:56 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=125633220.2578056.1345457554652.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.