From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 1/7] b43: N-PHY: random trivial fixes for typos, missing writes
Date: Sun, 11 Dec 2011 02:55:29 +0100 [thread overview]
Message-ID: <1323568535-2816-2-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1323568535-2816-1-git-send-email-zajec5@gmail.com>
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
There was off-by-one in tx2rx_events and tx2rx_delays arrays. Use
ARRAY_SIZE to avoid such mistakes.
Also, I've never meant to write numbers in octal system :| I really
forgot that leading 0 means octal :/
---
drivers/net/wireless/b43/phy_n.c | 23 +++++++++++++++--------
drivers/net/wireless/b43/tables_nphy.c | 2 +-
drivers/net/wireless/b43/tables_nphy.h | 28 ++++++++++++++--------------
3 files changed, 30 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index b17d9b6..f40d804 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1493,8 +1493,8 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
struct ssb_sprom *sprom = dev->dev->bus_sprom;
/* TX to RX */
- u8 tx2rx_events[9] = { 0x4, 0x3, 0x6, 0x5, 0x2, 0x1, 0x8, 0x1F };
- u8 tx2rx_delays[9] = { 8, 4, 2, 2, 4, 4, 6, 1 };
+ u8 tx2rx_events[8] = { 0x4, 0x3, 0x6, 0x5, 0x2, 0x1, 0x8, 0x1F };
+ u8 tx2rx_delays[8] = { 8, 4, 2, 2, 4, 4, 6, 1 };
/* RX to TX */
u8 rx2tx_events_ipa[9] = { 0x0, 0x1, 0x2, 0x8, 0x5, 0x6, 0xF, 0x3,
0x1F };
@@ -1505,6 +1505,9 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
u16 tmp16;
u32 tmp32;
+ b43_phy_write(dev, 0x23f, 0x1f8);
+ b43_phy_write(dev, 0x240, 0x1f8);
+
tmp32 = b43_ntab_read(dev, B43_NTAB32(30, 0));
tmp32 &= 0xffffff;
b43_ntab_write(dev, B43_NTAB32(30, 0), tmp32);
@@ -1520,12 +1523,13 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
b43_phy_write(dev, 0x2AE, 0x000C);
/* TX to RX */
- b43_nphy_set_rf_sequence(dev, 1, tx2rx_events, tx2rx_delays, 9);
+ b43_nphy_set_rf_sequence(dev, 1, tx2rx_events, tx2rx_delays,
+ ARRAY_SIZE(tx2rx_events));
/* RX to TX */
if (b43_nphy_ipa(dev))
- b43_nphy_set_rf_sequence(dev, 1, rx2tx_events_ipa,
- rx2tx_delays_ipa, 9);
+ b43_nphy_set_rf_sequence(dev, 0, rx2tx_events_ipa,
+ rx2tx_delays_ipa, ARRAY_SIZE(rx2tx_events_ipa));
if (nphy->hw_phyrxchain != 3 &&
nphy->hw_phyrxchain != nphy->hw_phytxchain) {
if (b43_nphy_ipa(dev)) {
@@ -1533,7 +1537,8 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
rx2tx_delays[6] = 1;
rx2tx_events[7] = 0x1F;
}
- b43_nphy_set_rf_sequence(dev, 1, rx2tx_events, rx2tx_delays, 9);
+ b43_nphy_set_rf_sequence(dev, 1, rx2tx_events, rx2tx_delays,
+ ARRAY_SIZE(rx2tx_events));
}
tmp16 = (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) ?
@@ -1547,8 +1552,8 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
b43_nphy_gain_ctrl_workarounds(dev);
- b43_ntab_write(dev, B43_NTAB32(8, 0), 2);
- b43_ntab_write(dev, B43_NTAB32(8, 16), 2);
+ b43_ntab_write(dev, B43_NTAB16(8, 0), 2);
+ b43_ntab_write(dev, B43_NTAB16(8, 16), 2);
/* TODO */
@@ -1560,6 +1565,8 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_BIAS_AUX, 0x07);
b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_LOB_BIAS, 0x88);
b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_LOB_BIAS, 0x88);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_CMFB_IDAC, 0x00);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_CMFB_IDAC, 0x00);
b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXG_CMFB_IDAC, 0x00);
b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXG_CMFB_IDAC, 0x00);
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index 7b326f2..4ec3d66 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -2652,7 +2652,7 @@ const u16 tbl_tx_iqlo_cal_cmds_fullcal_nphyrev3[] = {
const s16 tbl_tx_filter_coef_rev4[7][15] = {
{ -377, 137, -407, 208, -1527,
956, 93, 186, 93, 230,
- -44, 230, 20, -191, 201 },
+ -44, 230, 201, -191, 201 },
{ -77, 20, -98, 49, -93,
60, 56, 111, 56, 26,
-5, 26, 34, -32, 34 },
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index a81696b..ddca0dd 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -127,25 +127,25 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
#define B43_NTAB_C1_LOFEEDTH_SIZE 128
/* Static N-PHY tables, PHY revision >= 3 */
-#define B43_NTAB_FRAMESTRUCT_R3 B43_NTAB32(10, 000) /* frame struct */
-#define B43_NTAB_PILOT_R3 B43_NTAB16(11, 000) /* pilot */
-#define B43_NTAB_TMAP_R3 B43_NTAB32(12, 000) /* TM AP */
-#define B43_NTAB_INTLEVEL_R3 B43_NTAB32(13, 000) /* INT LV */
-#define B43_NTAB_TDTRN_R3 B43_NTAB32(14, 000) /* TD TRN */
-#define B43_NTAB_NOISEVAR0_R3 B43_NTAB32(16, 000) /* noise variance 0 */
+#define B43_NTAB_FRAMESTRUCT_R3 B43_NTAB32(10, 0) /* frame struct */
+#define B43_NTAB_PILOT_R3 B43_NTAB16(11, 0) /* pilot */
+#define B43_NTAB_TMAP_R3 B43_NTAB32(12, 0) /* TM AP */
+#define B43_NTAB_INTLEVEL_R3 B43_NTAB32(13, 0) /* INT LV */
+#define B43_NTAB_TDTRN_R3 B43_NTAB32(14, 0) /* TD TRN */
+#define B43_NTAB_NOISEVAR0_R3 B43_NTAB32(16, 0) /* noise variance 0 */
#define B43_NTAB_NOISEVAR1_R3 B43_NTAB32(16, 128) /* noise variance 1 */
-#define B43_NTAB_MCS_R3 B43_NTAB16(18, 000) /* MCS */
+#define B43_NTAB_MCS_R3 B43_NTAB16(18, 0) /* MCS */
#define B43_NTAB_TDI20A0_R3 B43_NTAB32(19, 128) /* TDI 20/0 */
#define B43_NTAB_TDI20A1_R3 B43_NTAB32(19, 256) /* TDI 20/1 */
#define B43_NTAB_TDI40A0_R3 B43_NTAB32(19, 640) /* TDI 40/0 */
#define B43_NTAB_TDI40A1_R3 B43_NTAB32(19, 768) /* TDI 40/1 */
-#define B43_NTAB_PILOTLT_R3 B43_NTAB32(20, 000) /* PLT lookup */
-#define B43_NTAB_CHANEST_R3 B43_NTAB32(22, 000) /* channel estimate */
-#define B43_NTAB_FRAMELT_R3 B43_NTAB8 (24, 000) /* frame lookup */
-#define B43_NTAB_C0_ESTPLT_R3 B43_NTAB8 (26, 000) /* estimated power lookup 0 */
-#define B43_NTAB_C1_ESTPLT_R3 B43_NTAB8 (27, 000) /* estimated power lookup 1 */
-#define B43_NTAB_C0_ADJPLT_R3 B43_NTAB8 (26, 064) /* adjusted power lookup 0 */
-#define B43_NTAB_C1_ADJPLT_R3 B43_NTAB8 (27, 064) /* adjusted power lookup 1 */
+#define B43_NTAB_PILOTLT_R3 B43_NTAB32(20, 0) /* PLT lookup */
+#define B43_NTAB_CHANEST_R3 B43_NTAB32(22, 0) /* channel estimate */
+#define B43_NTAB_FRAMELT_R3 B43_NTAB8(24, 0) /* frame lookup */
+#define B43_NTAB_C0_ESTPLT_R3 B43_NTAB8(26, 0) /* estimated power lookup 0 */
+#define B43_NTAB_C1_ESTPLT_R3 B43_NTAB8(27, 0) /* estimated power lookup 1 */
+#define B43_NTAB_C0_ADJPLT_R3 B43_NTAB8(26, 64) /* adjusted power lookup 0 */
+#define B43_NTAB_C1_ADJPLT_R3 B43_NTAB8(27, 64) /* adjusted power lookup 1 */
#define B43_NTAB_C0_GAINCTL_R3 B43_NTAB32(26, 192) /* gain control lookup 0 */
#define B43_NTAB_C1_GAINCTL_R3 B43_NTAB32(27, 192) /* gain control lookup 1 */
#define B43_NTAB_C0_IQLT_R3 B43_NTAB32(26, 320) /* I/Q lookup 0 */
--
1.7.3.4
WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 1/7] b43: N-PHY: random trivial fixes for typos, missing writes
Date: Sun, 11 Dec 2011 02:55:29 +0100 [thread overview]
Message-ID: <1323568535-2816-2-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1323568535-2816-1-git-send-email-zajec5@gmail.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
There was off-by-one in tx2rx_events and tx2rx_delays arrays. Use
ARRAY_SIZE to avoid such mistakes.
Also, I've never meant to write numbers in octal system :| I really
forgot that leading 0 means octal :/
---
drivers/net/wireless/b43/phy_n.c | 23 +++++++++++++++--------
drivers/net/wireless/b43/tables_nphy.c | 2 +-
drivers/net/wireless/b43/tables_nphy.h | 28 ++++++++++++++--------------
3 files changed, 30 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index b17d9b6..f40d804 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1493,8 +1493,8 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
struct ssb_sprom *sprom = dev->dev->bus_sprom;
/* TX to RX */
- u8 tx2rx_events[9] = { 0x4, 0x3, 0x6, 0x5, 0x2, 0x1, 0x8, 0x1F };
- u8 tx2rx_delays[9] = { 8, 4, 2, 2, 4, 4, 6, 1 };
+ u8 tx2rx_events[8] = { 0x4, 0x3, 0x6, 0x5, 0x2, 0x1, 0x8, 0x1F };
+ u8 tx2rx_delays[8] = { 8, 4, 2, 2, 4, 4, 6, 1 };
/* RX to TX */
u8 rx2tx_events_ipa[9] = { 0x0, 0x1, 0x2, 0x8, 0x5, 0x6, 0xF, 0x3,
0x1F };
@@ -1505,6 +1505,9 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
u16 tmp16;
u32 tmp32;
+ b43_phy_write(dev, 0x23f, 0x1f8);
+ b43_phy_write(dev, 0x240, 0x1f8);
+
tmp32 = b43_ntab_read(dev, B43_NTAB32(30, 0));
tmp32 &= 0xffffff;
b43_ntab_write(dev, B43_NTAB32(30, 0), tmp32);
@@ -1520,12 +1523,13 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
b43_phy_write(dev, 0x2AE, 0x000C);
/* TX to RX */
- b43_nphy_set_rf_sequence(dev, 1, tx2rx_events, tx2rx_delays, 9);
+ b43_nphy_set_rf_sequence(dev, 1, tx2rx_events, tx2rx_delays,
+ ARRAY_SIZE(tx2rx_events));
/* RX to TX */
if (b43_nphy_ipa(dev))
- b43_nphy_set_rf_sequence(dev, 1, rx2tx_events_ipa,
- rx2tx_delays_ipa, 9);
+ b43_nphy_set_rf_sequence(dev, 0, rx2tx_events_ipa,
+ rx2tx_delays_ipa, ARRAY_SIZE(rx2tx_events_ipa));
if (nphy->hw_phyrxchain != 3 &&
nphy->hw_phyrxchain != nphy->hw_phytxchain) {
if (b43_nphy_ipa(dev)) {
@@ -1533,7 +1537,8 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
rx2tx_delays[6] = 1;
rx2tx_events[7] = 0x1F;
}
- b43_nphy_set_rf_sequence(dev, 1, rx2tx_events, rx2tx_delays, 9);
+ b43_nphy_set_rf_sequence(dev, 1, rx2tx_events, rx2tx_delays,
+ ARRAY_SIZE(rx2tx_events));
}
tmp16 = (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) ?
@@ -1547,8 +1552,8 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
b43_nphy_gain_ctrl_workarounds(dev);
- b43_ntab_write(dev, B43_NTAB32(8, 0), 2);
- b43_ntab_write(dev, B43_NTAB32(8, 16), 2);
+ b43_ntab_write(dev, B43_NTAB16(8, 0), 2);
+ b43_ntab_write(dev, B43_NTAB16(8, 16), 2);
/* TODO */
@@ -1560,6 +1565,8 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_BIAS_AUX, 0x07);
b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_LOB_BIAS, 0x88);
b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_LOB_BIAS, 0x88);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_CMFB_IDAC, 0x00);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_CMFB_IDAC, 0x00);
b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXG_CMFB_IDAC, 0x00);
b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXG_CMFB_IDAC, 0x00);
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index 7b326f2..4ec3d66 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -2652,7 +2652,7 @@ const u16 tbl_tx_iqlo_cal_cmds_fullcal_nphyrev3[] = {
const s16 tbl_tx_filter_coef_rev4[7][15] = {
{ -377, 137, -407, 208, -1527,
956, 93, 186, 93, 230,
- -44, 230, 20, -191, 201 },
+ -44, 230, 201, -191, 201 },
{ -77, 20, -98, 49, -93,
60, 56, 111, 56, 26,
-5, 26, 34, -32, 34 },
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index a81696b..ddca0dd 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -127,25 +127,25 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
#define B43_NTAB_C1_LOFEEDTH_SIZE 128
/* Static N-PHY tables, PHY revision >= 3 */
-#define B43_NTAB_FRAMESTRUCT_R3 B43_NTAB32(10, 000) /* frame struct */
-#define B43_NTAB_PILOT_R3 B43_NTAB16(11, 000) /* pilot */
-#define B43_NTAB_TMAP_R3 B43_NTAB32(12, 000) /* TM AP */
-#define B43_NTAB_INTLEVEL_R3 B43_NTAB32(13, 000) /* INT LV */
-#define B43_NTAB_TDTRN_R3 B43_NTAB32(14, 000) /* TD TRN */
-#define B43_NTAB_NOISEVAR0_R3 B43_NTAB32(16, 000) /* noise variance 0 */
+#define B43_NTAB_FRAMESTRUCT_R3 B43_NTAB32(10, 0) /* frame struct */
+#define B43_NTAB_PILOT_R3 B43_NTAB16(11, 0) /* pilot */
+#define B43_NTAB_TMAP_R3 B43_NTAB32(12, 0) /* TM AP */
+#define B43_NTAB_INTLEVEL_R3 B43_NTAB32(13, 0) /* INT LV */
+#define B43_NTAB_TDTRN_R3 B43_NTAB32(14, 0) /* TD TRN */
+#define B43_NTAB_NOISEVAR0_R3 B43_NTAB32(16, 0) /* noise variance 0 */
#define B43_NTAB_NOISEVAR1_R3 B43_NTAB32(16, 128) /* noise variance 1 */
-#define B43_NTAB_MCS_R3 B43_NTAB16(18, 000) /* MCS */
+#define B43_NTAB_MCS_R3 B43_NTAB16(18, 0) /* MCS */
#define B43_NTAB_TDI20A0_R3 B43_NTAB32(19, 128) /* TDI 20/0 */
#define B43_NTAB_TDI20A1_R3 B43_NTAB32(19, 256) /* TDI 20/1 */
#define B43_NTAB_TDI40A0_R3 B43_NTAB32(19, 640) /* TDI 40/0 */
#define B43_NTAB_TDI40A1_R3 B43_NTAB32(19, 768) /* TDI 40/1 */
-#define B43_NTAB_PILOTLT_R3 B43_NTAB32(20, 000) /* PLT lookup */
-#define B43_NTAB_CHANEST_R3 B43_NTAB32(22, 000) /* channel estimate */
-#define B43_NTAB_FRAMELT_R3 B43_NTAB8 (24, 000) /* frame lookup */
-#define B43_NTAB_C0_ESTPLT_R3 B43_NTAB8 (26, 000) /* estimated power lookup 0 */
-#define B43_NTAB_C1_ESTPLT_R3 B43_NTAB8 (27, 000) /* estimated power lookup 1 */
-#define B43_NTAB_C0_ADJPLT_R3 B43_NTAB8 (26, 064) /* adjusted power lookup 0 */
-#define B43_NTAB_C1_ADJPLT_R3 B43_NTAB8 (27, 064) /* adjusted power lookup 1 */
+#define B43_NTAB_PILOTLT_R3 B43_NTAB32(20, 0) /* PLT lookup */
+#define B43_NTAB_CHANEST_R3 B43_NTAB32(22, 0) /* channel estimate */
+#define B43_NTAB_FRAMELT_R3 B43_NTAB8(24, 0) /* frame lookup */
+#define B43_NTAB_C0_ESTPLT_R3 B43_NTAB8(26, 0) /* estimated power lookup 0 */
+#define B43_NTAB_C1_ESTPLT_R3 B43_NTAB8(27, 0) /* estimated power lookup 1 */
+#define B43_NTAB_C0_ADJPLT_R3 B43_NTAB8(26, 64) /* adjusted power lookup 0 */
+#define B43_NTAB_C1_ADJPLT_R3 B43_NTAB8(27, 64) /* adjusted power lookup 1 */
#define B43_NTAB_C0_GAINCTL_R3 B43_NTAB32(26, 192) /* gain control lookup 0 */
#define B43_NTAB_C1_GAINCTL_R3 B43_NTAB32(27, 192) /* gain control lookup 1 */
#define B43_NTAB_C0_IQLT_R3 B43_NTAB32(26, 320) /* I/Q lookup 0 */
--
1.7.3.4
next prev parent reply other threads:[~2011-12-11 1:55 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-11 1:55 [PATCH 0/7] b43: N-PHY fixes, check dependency before applying Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki [this message]
2011-12-11 1:55 ` [PATCH 1/7] b43: N-PHY: random trivial fixes for typos, missing writes Rafał Miłecki
2011-12-11 1:55 ` [PATCH 2/7] b43: N-PHY: update some init values Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` [PATCH 3/7] b43: N-PHY: workaround BCM43224 hw bug in writing table id 9 Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` [PATCH 4/7] b43: N-PHY: add table for antenna software control Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` [PATCH 5/7] b43: N-PHY: determine various PHY params Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` [PATCH 6/7] b43: N-PHY: finish 2.4GHz 0x2056 radio setup Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` [PATCH 7/7] b43: N-PHY: implement spurious tone avoidance Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 3:06 ` Larry Finger
2011-12-11 3:06 ` Larry Finger
2011-12-11 4:08 ` Julian Calaby
2011-12-11 3:25 ` [PATCH 0/7] b43: N-PHY fixes, check dependency before applying Larry Finger
2011-12-11 3:25 ` Larry Finger
2011-12-11 3:37 ` Larry Finger
2011-12-11 3:37 ` Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323568535-2816-2-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=b43-dev@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.