From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 2/7] b43: N-PHY: update some init values
Date: Sun, 11 Dec 2011 02:55:30 +0100 [thread overview]
Message-ID: <1323568535-2816-3-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1323568535-2816-1-git-send-email-zajec5@gmail.com>
Changes were obtained from MMIO dump from 5.100.82.112.
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 24 ++++++++++++------------
drivers/net/wireless/b43/radio_2056.c | 10 +++++-----
2 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index f40d804..f540e48 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1591,18 +1591,18 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
0x70);
}
- b43_phy_write(dev, 0x224, 0x039C);
- b43_phy_write(dev, 0x225, 0x0357);
- b43_phy_write(dev, 0x226, 0x0317);
- b43_phy_write(dev, 0x227, 0x02D7);
- b43_phy_write(dev, 0x228, 0x039C);
- b43_phy_write(dev, 0x229, 0x0357);
- b43_phy_write(dev, 0x22A, 0x0317);
- b43_phy_write(dev, 0x22B, 0x02D7);
- b43_phy_write(dev, 0x22C, 0x039C);
- b43_phy_write(dev, 0x22D, 0x0357);
- b43_phy_write(dev, 0x22E, 0x0317);
- b43_phy_write(dev, 0x22F, 0x02D7);
+ b43_phy_write(dev, 0x224, 0x03eb);
+ b43_phy_write(dev, 0x225, 0x03eb);
+ b43_phy_write(dev, 0x226, 0x0341);
+ b43_phy_write(dev, 0x227, 0x0341);
+ b43_phy_write(dev, 0x228, 0x042b);
+ b43_phy_write(dev, 0x229, 0x042b);
+ b43_phy_write(dev, 0x22a, 0x0381);
+ b43_phy_write(dev, 0x22b, 0x0381);
+ b43_phy_write(dev, 0x22c, 0x042b);
+ b43_phy_write(dev, 0x22d, 0x042b);
+ b43_phy_write(dev, 0x22e, 0x0381);
+ b43_phy_write(dev, 0x22f, 0x0381);
}
static void b43_nphy_workarounds_rev1_2(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/radio_2056.c b/drivers/net/wireless/b43/radio_2056.c
index a01f776..4a42994 100644
--- a/drivers/net/wireless/b43/radio_2056.c
+++ b/drivers/net/wireless/b43/radio_2056.c
@@ -1572,14 +1572,14 @@ static const struct b2056_inittab_entry b2056_inittab_rev6_syn[] = {
[B2056_SYN_PLL_XTAL5] = { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
[B2056_SYN_PLL_XTAL6] = { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
[B2056_SYN_PLL_REFDIV] = { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
- [B2056_SYN_PLL_PFD] = { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+ [B2056_SYN_PLL_PFD] = { .ghz5 = 0x0006, .ghz2 = 0x0006, UPLOAD, },
[B2056_SYN_PLL_CP1] = { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
- [B2056_SYN_PLL_CP2] = { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+ [B2056_SYN_PLL_CP2] = { .ghz5 = 0x003f, .ghz2 = 0x003f, UPLOAD, },
[B2056_SYN_PLL_CP3] = { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
- [B2056_SYN_PLL_LOOPFILTER1] = { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
- [B2056_SYN_PLL_LOOPFILTER2] = { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+ [B2056_SYN_PLL_LOOPFILTER1] = { .ghz5 = 0x0006, .ghz2 = 0x0006, UPLOAD, },
+ [B2056_SYN_PLL_LOOPFILTER2] = { .ghz5 = 0x0006, .ghz2 = 0x0006, UPLOAD, },
[B2056_SYN_PLL_LOOPFILTER3] = { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
- [B2056_SYN_PLL_LOOPFILTER4] = { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+ [B2056_SYN_PLL_LOOPFILTER4] = { .ghz5 = 0x002b, .ghz2 = 0x002b, UPLOAD, },
[B2056_SYN_PLL_LOOPFILTER5] = { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
[B2056_SYN_PLL_MMD1] = { .ghz5 = 0x001c, .ghz2 = 0x001c, NOUPLOAD, },
[B2056_SYN_PLL_MMD2] = { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
--
1.7.3.4
WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 2/7] b43: N-PHY: update some init values
Date: Sun, 11 Dec 2011 02:55:30 +0100 [thread overview]
Message-ID: <1323568535-2816-3-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1323568535-2816-1-git-send-email-zajec5@gmail.com>
Changes were obtained from MMIO dump from 5.100.82.112.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 24 ++++++++++++------------
drivers/net/wireless/b43/radio_2056.c | 10 +++++-----
2 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index f40d804..f540e48 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1591,18 +1591,18 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
0x70);
}
- b43_phy_write(dev, 0x224, 0x039C);
- b43_phy_write(dev, 0x225, 0x0357);
- b43_phy_write(dev, 0x226, 0x0317);
- b43_phy_write(dev, 0x227, 0x02D7);
- b43_phy_write(dev, 0x228, 0x039C);
- b43_phy_write(dev, 0x229, 0x0357);
- b43_phy_write(dev, 0x22A, 0x0317);
- b43_phy_write(dev, 0x22B, 0x02D7);
- b43_phy_write(dev, 0x22C, 0x039C);
- b43_phy_write(dev, 0x22D, 0x0357);
- b43_phy_write(dev, 0x22E, 0x0317);
- b43_phy_write(dev, 0x22F, 0x02D7);
+ b43_phy_write(dev, 0x224, 0x03eb);
+ b43_phy_write(dev, 0x225, 0x03eb);
+ b43_phy_write(dev, 0x226, 0x0341);
+ b43_phy_write(dev, 0x227, 0x0341);
+ b43_phy_write(dev, 0x228, 0x042b);
+ b43_phy_write(dev, 0x229, 0x042b);
+ b43_phy_write(dev, 0x22a, 0x0381);
+ b43_phy_write(dev, 0x22b, 0x0381);
+ b43_phy_write(dev, 0x22c, 0x042b);
+ b43_phy_write(dev, 0x22d, 0x042b);
+ b43_phy_write(dev, 0x22e, 0x0381);
+ b43_phy_write(dev, 0x22f, 0x0381);
}
static void b43_nphy_workarounds_rev1_2(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/radio_2056.c b/drivers/net/wireless/b43/radio_2056.c
index a01f776..4a42994 100644
--- a/drivers/net/wireless/b43/radio_2056.c
+++ b/drivers/net/wireless/b43/radio_2056.c
@@ -1572,14 +1572,14 @@ static const struct b2056_inittab_entry b2056_inittab_rev6_syn[] = {
[B2056_SYN_PLL_XTAL5] = { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
[B2056_SYN_PLL_XTAL6] = { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
[B2056_SYN_PLL_REFDIV] = { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
- [B2056_SYN_PLL_PFD] = { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+ [B2056_SYN_PLL_PFD] = { .ghz5 = 0x0006, .ghz2 = 0x0006, UPLOAD, },
[B2056_SYN_PLL_CP1] = { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
- [B2056_SYN_PLL_CP2] = { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+ [B2056_SYN_PLL_CP2] = { .ghz5 = 0x003f, .ghz2 = 0x003f, UPLOAD, },
[B2056_SYN_PLL_CP3] = { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
- [B2056_SYN_PLL_LOOPFILTER1] = { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
- [B2056_SYN_PLL_LOOPFILTER2] = { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+ [B2056_SYN_PLL_LOOPFILTER1] = { .ghz5 = 0x0006, .ghz2 = 0x0006, UPLOAD, },
+ [B2056_SYN_PLL_LOOPFILTER2] = { .ghz5 = 0x0006, .ghz2 = 0x0006, UPLOAD, },
[B2056_SYN_PLL_LOOPFILTER3] = { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
- [B2056_SYN_PLL_LOOPFILTER4] = { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+ [B2056_SYN_PLL_LOOPFILTER4] = { .ghz5 = 0x002b, .ghz2 = 0x002b, UPLOAD, },
[B2056_SYN_PLL_LOOPFILTER5] = { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
[B2056_SYN_PLL_MMD1] = { .ghz5 = 0x001c, .ghz2 = 0x001c, NOUPLOAD, },
[B2056_SYN_PLL_MMD2] = { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
--
1.7.3.4
next prev parent reply other threads:[~2011-12-11 1:55 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-11 1:55 [PATCH 0/7] b43: N-PHY fixes, check dependency before applying Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` [PATCH 1/7] b43: N-PHY: random trivial fixes for typos, missing writes Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki [this message]
2011-12-11 1:55 ` [PATCH 2/7] b43: N-PHY: update some init values Rafał Miłecki
2011-12-11 1:55 ` [PATCH 3/7] b43: N-PHY: workaround BCM43224 hw bug in writing table id 9 Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` [PATCH 4/7] b43: N-PHY: add table for antenna software control Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` [PATCH 5/7] b43: N-PHY: determine various PHY params Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` [PATCH 6/7] b43: N-PHY: finish 2.4GHz 0x2056 radio setup Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 1:55 ` [PATCH 7/7] b43: N-PHY: implement spurious tone avoidance Rafał Miłecki
2011-12-11 1:55 ` Rafał Miłecki
2011-12-11 3:06 ` Larry Finger
2011-12-11 3:06 ` Larry Finger
2011-12-11 4:08 ` Julian Calaby
2011-12-11 3:25 ` [PATCH 0/7] b43: N-PHY fixes, check dependency before applying Larry Finger
2011-12-11 3:25 ` Larry Finger
2011-12-11 3:37 ` Larry Finger
2011-12-11 3:37 ` Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323568535-2816-3-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=b43-dev@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.