From: shc_work@mail.ru (Alexander Shiyan)
To: linux-arm-kernel@lists.infradead.org
Subject: Re[2]: [PATCH] ARM: dts: imx27 phyCARD-S remove wrong I2C RTC
Date: Sun, 07 Jul 2013 14:31:41 +0400 [thread overview]
Message-ID: <1373193101.622550139@f60.mail.ru> (raw)
In-Reply-To: <20130707102207.GI16871@s25.your-server.de>
> On Sat, Jul 06, 2013 at 12:51:58PM +0400, Alexander Shiyan wrote:
> > > Fixup of commit 7874d595b78e431f0f661d2fe47625649308a52e
> > > "ARM: dts: Add device tree support for phycard pca100".
> > >
> > > Remove wrong I2C RTC node.
> > >
> > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> > > ---
> > >
> > > Thanks, Alexander, you are right. I2C2 has no RTC.
> > ...
> >
> > There are a couple of comments on this file.
> >
> > I think that the OWIRE should be moved to the RDK.
>
> I moved OWIRE and i2c1 to RDK. Both are not used on the SOM.
>
> > ioexpander must contain "gpio-controller" at least, and for use it further,
> > it is necessary to define the label for this node.
>
> I checked all I2C devices in the board schematics. There is actually no
> ioexpander. I don't know why it was added. I will send some I2C patches
> later.
Perhaps the chip is mounted on the camera module.
A similar IC is exist on PCM-970 camera addon device.
If so, the device should also be moved to RDK.
---
WARNING: multiple messages have this Message-ID (diff)
From: "Alexander Shiyan" <shc_work@mail.ru>
To: "Markus Pargmann" <mpa@pengutronix.de>
Cc: "Fabio Estevam" <fabio.estevam@freescale.com>,
devicetree-discuss@lists.ozlabs.org,
"Shawn Guo" <shawn.guo@linaro.org>,
"Sascha Hauer" <kernel@pengutronix.de>,
linux-arm-kernel@lists.infradead.org
Subject: Re[2]: [PATCH] ARM: dts: imx27 phyCARD-S remove wrong I2C RTC
Date: Sun, 07 Jul 2013 14:31:41 +0400 [thread overview]
Message-ID: <1373193101.622550139@f60.mail.ru> (raw)
In-Reply-To: <20130707102207.GI16871@s25.your-server.de>
> On Sat, Jul 06, 2013 at 12:51:58PM +0400, Alexander Shiyan wrote:
> > > Fixup of commit 7874d595b78e431f0f661d2fe47625649308a52e
> > > "ARM: dts: Add device tree support for phycard pca100".
> > >
> > > Remove wrong I2C RTC node.
> > >
> > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> > > ---
> > >
> > > Thanks, Alexander, you are right. I2C2 has no RTC.
> > ...
> >
> > There are a couple of comments on this file.
> >
> > I think that the OWIRE should be moved to the RDK.
>
> I moved OWIRE and i2c1 to RDK. Both are not used on the SOM.
>
> > ioexpander must contain "gpio-controller" at least, and for use it further,
> > it is necessary to define the label for this node.
>
> I checked all I2C devices in the board schematics. There is actually no
> ioexpander. I don't know why it was added. I will send some I2C patches
> later.
Perhaps the chip is mounted on the camera module.
A similar IC is exist on PCM-970 camera addon device.
If so, the device should also be moved to RDK.
---
next prev parent reply other threads:[~2013-07-07 10:31 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-28 14:50 [PATCH v3 0/5] ARM: dts: imx27 Phytec phyCARD-S Markus Pargmann
2013-06-28 14:50 ` Markus Pargmann
2013-06-28 14:50 ` [PATCH v3 1/5] ARM: imx27: Use 'AITC' for the interrupt controller name Markus Pargmann
2013-06-28 14:50 ` Markus Pargmann
2013-06-28 14:50 ` [PATCH v3 2/5] ARM: dts: imx27: Add imx framebuffer device Markus Pargmann
2013-06-28 14:50 ` Markus Pargmann
2013-06-28 15:10 ` Alexander Shiyan
2013-06-28 15:10 ` Alexander Shiyan
2013-07-01 9:30 ` Shawn Guo
2013-07-01 9:30 ` Shawn Guo
2013-07-02 4:30 ` Re[2]: " Alexander Shiyan
2013-06-28 14:50 ` [PATCH v3 3/5] ARM: dts: imx27: Add 1-wire Markus Pargmann
2013-06-28 14:50 ` Markus Pargmann
2013-06-28 14:50 ` [PATCH v3 4/5] ARM: dts: imx27 cpufreq-cpu0 frequencies Markus Pargmann
2013-06-28 14:50 ` Markus Pargmann
2013-06-28 14:50 ` [PATCH v3 5/5] ARM: dts: Add device tree support for phycard pca100 Markus Pargmann
2013-06-28 14:50 ` Markus Pargmann
2013-07-02 16:27 ` Alexander Shiyan
2013-07-02 16:27 ` Alexander Shiyan
2013-07-05 13:45 ` [PATCH] ARM: dts: imx27 phyCARD-S remove wrong I2C RTC Markus Pargmann
2013-07-05 13:45 ` Markus Pargmann
2013-07-06 3:15 ` Shawn Guo
2013-07-06 3:15 ` Shawn Guo
2013-07-06 8:51 ` Alexander Shiyan
2013-07-06 8:51 ` Alexander Shiyan
2013-07-07 10:22 ` Markus Pargmann
2013-07-07 10:22 ` Markus Pargmann
2013-07-07 10:31 ` Alexander Shiyan [this message]
2013-07-07 10:31 ` Re[2]: " Alexander Shiyan
2013-07-07 10:44 ` Markus Pargmann
2013-07-07 10:44 ` Markus Pargmann
2013-06-29 8:38 ` [PATCH v3 0/5] ARM: dts: imx27 Phytec phyCARD-S Sascha Hauer
2013-06-29 8:38 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373193101.622550139@f60.mail.ru \
--to=shc_work@mail.ru \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.