All of lore.kernel.org
 help / color / mirror / Atom feed
From: shc_work@mail.ru (Alexander Shiyan)
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 5/5] ARM: dts: Add device tree support for phycard pca100
Date: Tue, 02 Jul 2013 20:27:49 +0400	[thread overview]
Message-ID: <1372782469.486055292@f129.mail.ru> (raw)
In-Reply-To: <1372431037-13519-6-git-send-email-mpa@pengutronix.de>

> Board files for Phytec phyCARD-S "System on Module" and "Rapid
> Development Kit".
> 
> Based on patches from:
> 
> Steffen Trumtrar <s.trumtrar@pengutronix.de>:
>  - Original patch
>  - ARM: dts: Set partition offsets for phycard
>  - ARM: dts: Use CSPI1 instead of CSPI2 on phycard pca100
>  - ARM: imx27-phytec-phycard-S.dts: resize nand partitions
...
> diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
...
> +&i2c1 {
> +	status = "okay";
> +
> +	ioexpander at 41 {
> +		compatible = "nxp,pca9536";
> +		reg = <0x41>;
> +	};
> +
> +	rtc at 51 {
> +		compatible = "nxp,pcf8563";
> +		reg = <0x51>;
> +	};
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +
> +	lm75 at 4a {
> +		compatible = "national,lm75";
> +		reg = <0x4a>;
> +	};
> +
> +	rtc at 51 {
> +		compatible = "nxp,pcf8563";
> +		reg = <0x51>;
> +	};

Really two identical RTC on I2C1 & I2C2 or it is typo?

---

WARNING: multiple messages have this Message-ID (diff)
From: "Alexander Shiyan" <shc_work-JGs/UdohzUI@public.gmane.org>
To: "Markus Pargmann" <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: "Fabio Estevam"
	<fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
	"Steffen Trumtrar"
	<s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	"Sascha Hauer" <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v3 5/5] ARM: dts: Add device tree support for phycard pca100
Date: Tue, 02 Jul 2013 20:27:49 +0400	[thread overview]
Message-ID: <1372782469.486055292@f129.mail.ru> (raw)
In-Reply-To: <1372431037-13519-6-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>

> Board files for Phytec phyCARD-S "System on Module" and "Rapid
> Development Kit".
> 
> Based on patches from:
> 
> Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>:
>  - Original patch
>  - ARM: dts: Set partition offsets for phycard
>  - ARM: dts: Use CSPI1 instead of CSPI2 on phycard pca100
>  - ARM: imx27-phytec-phycard-S.dts: resize nand partitions
...
> diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
...
> +&i2c1 {
> +	status = "okay";
> +
> +	ioexpander@41 {
> +		compatible = "nxp,pca9536";
> +		reg = <0x41>;
> +	};
> +
> +	rtc@51 {
> +		compatible = "nxp,pcf8563";
> +		reg = <0x51>;
> +	};
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +
> +	lm75@4a {
> +		compatible = "national,lm75";
> +		reg = <0x4a>;
> +	};
> +
> +	rtc@51 {
> +		compatible = "nxp,pcf8563";
> +		reg = <0x51>;
> +	};

Really two identical RTC on I2C1 & I2C2 or it is typo?

---

  reply	other threads:[~2013-07-02 16:27 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-28 14:50 [PATCH v3 0/5] ARM: dts: imx27 Phytec phyCARD-S Markus Pargmann
2013-06-28 14:50 ` Markus Pargmann
2013-06-28 14:50 ` [PATCH v3 1/5] ARM: imx27: Use 'AITC' for the interrupt controller name Markus Pargmann
2013-06-28 14:50   ` Markus Pargmann
2013-06-28 14:50 ` [PATCH v3 2/5] ARM: dts: imx27: Add imx framebuffer device Markus Pargmann
2013-06-28 14:50   ` Markus Pargmann
2013-06-28 15:10   ` Alexander Shiyan
2013-06-28 15:10     ` Alexander Shiyan
2013-07-01  9:30     ` Shawn Guo
2013-07-01  9:30       ` Shawn Guo
2013-07-02  4:30       ` Re[2]: " Alexander Shiyan
2013-06-28 14:50 ` [PATCH v3 3/5] ARM: dts: imx27: Add 1-wire Markus Pargmann
2013-06-28 14:50   ` Markus Pargmann
2013-06-28 14:50 ` [PATCH v3 4/5] ARM: dts: imx27 cpufreq-cpu0 frequencies Markus Pargmann
2013-06-28 14:50   ` Markus Pargmann
2013-06-28 14:50 ` [PATCH v3 5/5] ARM: dts: Add device tree support for phycard pca100 Markus Pargmann
2013-06-28 14:50   ` Markus Pargmann
2013-07-02 16:27   ` Alexander Shiyan [this message]
2013-07-02 16:27     ` Alexander Shiyan
2013-07-05 13:45     ` [PATCH] ARM: dts: imx27 phyCARD-S remove wrong I2C RTC Markus Pargmann
2013-07-05 13:45       ` Markus Pargmann
2013-07-06  3:15       ` Shawn Guo
2013-07-06  3:15         ` Shawn Guo
2013-07-06  8:51       ` Alexander Shiyan
2013-07-06  8:51         ` Alexander Shiyan
2013-07-07 10:22         ` Markus Pargmann
2013-07-07 10:22           ` Markus Pargmann
2013-07-07 10:31           ` Re[2]: " Alexander Shiyan
2013-07-07 10:31             ` Alexander Shiyan
2013-07-07 10:44             ` Markus Pargmann
2013-07-07 10:44               ` Markus Pargmann
2013-06-29  8:38 ` [PATCH v3 0/5] ARM: dts: imx27 Phytec phyCARD-S Sascha Hauer
2013-06-29  8:38   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1372782469.486055292@f129.mail.ru \
    --to=shc_work@mail.ru \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.