All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sinan Kaya <okaya@codeaurora.org>
To: dmaengine@vger.kernel.org, timur@codeaurora.org,
	devicetree@vger.kernel.org, cov@codeaurora.org,
	vinod.koul@intel.com, jcm@redhat.com
Cc: agross@codeaurora.org, arnd@arndb.de,
	linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Sinan Kaya <okaya@codeaurora.org>,
	Dan Williams <dan.j.williams@intel.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH V4 07/10] dmaengine: qcom_hidma: bring out interrupt cause
Date: Wed, 28 Sep 2016 22:12:44 -0400	[thread overview]
Message-ID: <1475115167-5898-8-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1475115167-5898-1-git-send-email-okaya@codeaurora.org>

Bring out the interrupt cause to the top level so that MSI interrupts
can be hooked at a later stage.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/dma/qcom/hidma_ll.c | 72 +++++++++++++++++++++------------------------
 1 file changed, 34 insertions(+), 38 deletions(-)

diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index c911ca2..088935f 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -397,12 +397,24 @@ static int hidma_ll_reset(struct hidma_lldev *lldev)
  * requests traditionally to the destination, this concept does not apply
  * here for this HW.
  */
-irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
 {
-	struct hidma_lldev *lldev = arg;
-	u32 status;
-	u32 enable;
-	u32 cause;
+	if (cause & HIDMA_ERR_INT_MASK) {
+		dev_err(lldev->dev, "error 0x%x, disabling...\n",
+				cause);
+
+		/* Clear out pending interrupts */
+		writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+
+		/* No further submissions. */
+		hidma_ll_disable(lldev);
+
+		/* Driver completes the txn and intimates the client.*/
+		hidma_cleanup_pending_tre(lldev, 0xFF,
+					  HIDMA_EVRE_STATUS_ERROR);
+
+		return;
+	}
 
 	/*
 	 * Fine tuned for this HW...
@@ -412,45 +424,29 @@ irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
 	 * interrupt delivery guarantees. Do not copy this code blindly and
 	 * expect that to work.
 	 */
-	status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
-	enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
-	cause = status & enable;
-
-	while (cause) {
-		if (cause & HIDMA_ERR_INT_MASK) {
-			dev_err(lldev->dev, "error 0x%x, disabling...\n",
-					cause);
-
-			/* Clear out pending interrupts */
-			writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
-
-			/* No further submissions. */
-			hidma_ll_disable(lldev);
-
-			/* Driver completes the txn and intimates the client.*/
-			hidma_cleanup_pending_tre(lldev, 0xFF,
-						  HIDMA_EVRE_STATUS_ERROR);
-			goto out;
-		}
-
+	while (atomic_read(&lldev->pending_tre_count)) {
 		/*
 		 * Try to consume as many EVREs as possible.
 		 */
-		hidma_handle_tre_completion(lldev);
+		if (hidma_handle_tre_completion(lldev, 0, 0))
+			break;
+	}
 
-		/* We consumed TREs or there are pending TREs or EVREs. */
-		writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+	/* We consumed TREs or there are pending TREs or EVREs. */
+	writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+}
 
-		/*
-		 * Another interrupt might have arrived while we are
-		 * processing this one. Read the new cause.
-		 */
-		status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
-		enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
-		cause = status & enable;
-	}
+irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+{
+	struct hidma_lldev *lldev = arg;
+	u32 status;
+	u32 enable;
+	u32 cause;
 
-out:
+	status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
+	enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
+	cause = status & enable;
+	hidma_ll_int_handler_internal(lldev, cause);
 	return IRQ_HANDLED;
 }
 
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 07/10] dmaengine: qcom_hidma: bring out interrupt cause
Date: Wed, 28 Sep 2016 22:12:44 -0400	[thread overview]
Message-ID: <1475115167-5898-8-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1475115167-5898-1-git-send-email-okaya@codeaurora.org>

Bring out the interrupt cause to the top level so that MSI interrupts
can be hooked at a later stage.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/dma/qcom/hidma_ll.c | 72 +++++++++++++++++++++------------------------
 1 file changed, 34 insertions(+), 38 deletions(-)

diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index c911ca2..088935f 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -397,12 +397,24 @@ static int hidma_ll_reset(struct hidma_lldev *lldev)
  * requests traditionally to the destination, this concept does not apply
  * here for this HW.
  */
-irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
 {
-	struct hidma_lldev *lldev = arg;
-	u32 status;
-	u32 enable;
-	u32 cause;
+	if (cause & HIDMA_ERR_INT_MASK) {
+		dev_err(lldev->dev, "error 0x%x, disabling...\n",
+				cause);
+
+		/* Clear out pending interrupts */
+		writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+
+		/* No further submissions. */
+		hidma_ll_disable(lldev);
+
+		/* Driver completes the txn and intimates the client.*/
+		hidma_cleanup_pending_tre(lldev, 0xFF,
+					  HIDMA_EVRE_STATUS_ERROR);
+
+		return;
+	}
 
 	/*
 	 * Fine tuned for this HW...
@@ -412,45 +424,29 @@ irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
 	 * interrupt delivery guarantees. Do not copy this code blindly and
 	 * expect that to work.
 	 */
-	status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
-	enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
-	cause = status & enable;
-
-	while (cause) {
-		if (cause & HIDMA_ERR_INT_MASK) {
-			dev_err(lldev->dev, "error 0x%x, disabling...\n",
-					cause);
-
-			/* Clear out pending interrupts */
-			writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
-
-			/* No further submissions. */
-			hidma_ll_disable(lldev);
-
-			/* Driver completes the txn and intimates the client.*/
-			hidma_cleanup_pending_tre(lldev, 0xFF,
-						  HIDMA_EVRE_STATUS_ERROR);
-			goto out;
-		}
-
+	while (atomic_read(&lldev->pending_tre_count)) {
 		/*
 		 * Try to consume as many EVREs as possible.
 		 */
-		hidma_handle_tre_completion(lldev);
+		if (hidma_handle_tre_completion(lldev, 0, 0))
+			break;
+	}
 
-		/* We consumed TREs or there are pending TREs or EVREs. */
-		writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+	/* We consumed TREs or there are pending TREs or EVREs. */
+	writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+}
 
-		/*
-		 * Another interrupt might have arrived while we are
-		 * processing this one. Read the new cause.
-		 */
-		status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
-		enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
-		cause = status & enable;
-	}
+irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+{
+	struct hidma_lldev *lldev = arg;
+	u32 status;
+	u32 enable;
+	u32 cause;
 
-out:
+	status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
+	enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
+	cause = status & enable;
+	hidma_ll_int_handler_internal(lldev, cause);
 	return IRQ_HANDLED;
 }
 
-- 
1.9.1

  parent reply	other threads:[~2016-09-29  2:12 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-29  2:12 [PATCH V4 00/10] dmaengine: qcom_hidma: add MSI interrupt support Sinan Kaya
2016-09-29  2:12 ` Sinan Kaya
2016-09-29  2:12 ` [PATCH V4 02/10] Documentation: DT: qcom_hidma: correct spelling mistakes Sinan Kaya
2016-09-29  2:12   ` Sinan Kaya
2016-09-29  2:12 ` [PATCH V4 06/10] dmaengine: qcom_hidma: make error and success path common Sinan Kaya
2016-09-29  2:12   ` Sinan Kaya
2016-09-29  2:12 ` Sinan Kaya [this message]
2016-09-29  2:12   ` [PATCH V4 07/10] dmaengine: qcom_hidma: bring out interrupt cause Sinan Kaya
     [not found] ` <1475115167-5898-1-git-send-email-okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-09-29  2:12   ` [PATCH V4 01/10] Documentation: DT: qcom_hidma: update binding for MSI Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-09-29  2:12   ` [PATCH V4 03/10] of: irq: make of_msi_configure accessible from modules Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-09-29  2:12   ` [PATCH V4 04/10] dmaengine: qcom_hidma: configure DMA and MSI for OF Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-10-01  6:17     ` Vinod Koul
2016-10-01  6:17       ` Vinod Koul
2016-10-01 15:15       ` Sinan Kaya
2016-10-01 15:15         ` Sinan Kaya
2016-10-03  3:38         ` Vinod Koul
2016-10-03  3:38           ` Vinod Koul
2016-10-03 13:39           ` Sinan Kaya
2016-10-03 13:39             ` Sinan Kaya
2016-10-03 13:39             ` Sinan Kaya
2016-09-29  2:12   ` [PATCH V4 05/10] dmaengine: qcom_hidma: make pending_tre_count atomic Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-10-01  6:19     ` Vinod Koul
2016-10-01  6:19       ` Vinod Koul
2016-10-01 15:19       ` Sinan Kaya
2016-10-01 15:19         ` Sinan Kaya
2016-10-03  3:39         ` Vinod Koul
2016-10-03  3:39           ` Vinod Koul
2016-09-29  2:12   ` [PATCH V4 08/10] dmaengine: qcom_hidma: add a common API to setup the interrupt Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-09-29  2:12   ` [PATCH V4 09/10] dmaengine: qcom_hidma: protect common data structures Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-09-29  2:12     ` Sinan Kaya
2016-09-29  2:12 ` [PATCH V4 10/10] dmaengine: qcom_hidma: add MSI support for interrupts Sinan Kaya
2016-09-29  2:12   ` Sinan Kaya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1475115167-5898-8-git-send-email-okaya@codeaurora.org \
    --to=okaya@codeaurora.org \
    --cc=agross@codeaurora.org \
    --cc=arnd@arndb.de \
    --cc=cov@codeaurora.org \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=jcm@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=timur@codeaurora.org \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.