All of lore.kernel.org
 help / color / mirror / Atom feed
From: jagan@openedev.com (Jagan Teki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 03/15] ARM: dts: imx6ul-isiot: Add imx6ul-isiot-common.dtsi
Date: Fri, 24 Mar 2017 21:48:38 +0530	[thread overview]
Message-ID: <1490372330-5611-4-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1490372330-5611-1-git-send-email-jagan@openedev.com>

From: Jagan Teki <jagan@amarulasolutions.com>

lcdif nodes are differ wrt specific LCD connected on Is.IoT MX6UL
module, so create separate file 'imx6ul-isiot-common.dtsi' for common
lcdif node structure and include the same on respective dts.

More common nodes will add in future patches.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/boot/dts/imx6ul-isiot-common.dtsi | 107 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/imx6ul-isiot-emmc.dts    |   1 +
 arch/arm/boot/dts/imx6ul-isiot-nand.dts    |   1 +
 3 files changed, 109 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6ul-isiot-common.dtsi

diff --git a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi
new file mode 100644
index 0000000..9660e20
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <28000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <30>;
+				hback-porch = <30>;
+				hsync-len = <64>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				vsync-len = <20>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
index f5b4228..73a1d0f 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
@@ -43,6 +43,7 @@
 /dts-v1/;
 
 #include "imx6ul-isiot.dtsi"
+#include "imx6ul-isiot-common.dtsi"
 
 / {
 	model = "Engicam Is.IoT MX6UL eMMC Starter kit";
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
index de15e1c..da29a86 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
@@ -43,6 +43,7 @@
 /dts-v1/;
 
 #include "imx6ul-isiot.dtsi"
+#include "imx6ul-isiot-common.dtsi"
 
 / {
 	model = "Engicam Is.IoT MX6UL NAND Starter kit";
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@openedev.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Sascha Hauer <kernel@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Matteo Lisi <matteo.lisi@engicam.com>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v2 03/15] ARM: dts: imx6ul-isiot: Add imx6ul-isiot-common.dtsi
Date: Fri, 24 Mar 2017 21:48:38 +0530	[thread overview]
Message-ID: <1490372330-5611-4-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1490372330-5611-1-git-send-email-jagan@openedev.com>

From: Jagan Teki <jagan@amarulasolutions.com>

lcdif nodes are differ wrt specific LCD connected on Is.IoT MX6UL
module, so create separate file 'imx6ul-isiot-common.dtsi' for common
lcdif node structure and include the same on respective dts.

More common nodes will add in future patches.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/boot/dts/imx6ul-isiot-common.dtsi | 107 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/imx6ul-isiot-emmc.dts    |   1 +
 arch/arm/boot/dts/imx6ul-isiot-nand.dts    |   1 +
 3 files changed, 109 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6ul-isiot-common.dtsi

diff --git a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi
new file mode 100644
index 0000000..9660e20
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <28000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <30>;
+				hback-porch = <30>;
+				hsync-len = <64>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				vsync-len = <20>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
index f5b4228..73a1d0f 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
@@ -43,6 +43,7 @@
 /dts-v1/;
 
 #include "imx6ul-isiot.dtsi"
+#include "imx6ul-isiot-common.dtsi"
 
 / {
 	model = "Engicam Is.IoT MX6UL eMMC Starter kit";
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
index de15e1c..da29a86 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
@@ -43,6 +43,7 @@
 /dts-v1/;
 
 #include "imx6ul-isiot.dtsi"
+#include "imx6ul-isiot-common.dtsi"
 
 / {
 	model = "Engicam Is.IoT MX6UL NAND Starter kit";
-- 
1.9.1

  parent reply	other threads:[~2017-03-24 16:18 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-24 16:18 [PATCH v2 00/15] ARM: dts: i.MX6: Add lcdif/sound nodes on Engicam SOMs Jagan Teki
2017-03-24 16:18 ` Jagan Teki
2017-03-24 16:18 ` Jagan Teki
2017-03-24 16:18 ` [PATCH v2 01/15] ARM: dts: imx6ul-geam: Add backlight support for lcdif Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18 ` [PATCH v2 02/15] ARM: dts: imx6ul-isiot: " Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18 ` Jagan Teki [this message]
2017-03-24 16:18   ` [PATCH v2 03/15] ARM: dts: imx6ul-isiot: Add imx6ul-isiot-common.dtsi Jagan Teki
2017-03-24 16:18 ` [PATCH v2 04/15] ARM: dts: imx6ul-isiot: Add i2c nodes Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18 ` [PATCH v2 05/15] ARM: dts: imx6ul-isiot-common: Add touchscreen node Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18 ` [PATCH v2 06/15] ARM: dts: imx6ul-[geam|isiot]: Add sai2 node Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18 ` [PATCH v2 07/15] ARM: dts: imx6ul-isiot: Add Sound card with codec node Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-29  3:27   ` Shawn Guo
2017-03-29  3:27     ` Shawn Guo
2017-03-24 16:18 ` [PATCH v2 08/15] ARM: dts: imx6ul-geam: " Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18 ` [PATCH v2 09/15] ARM: dts: imx6qdl-icore: " Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18 ` [PATCH v2 10/15] ARM: dts: imx6dl-icore-rqs: Add sgtl5000 " Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-29  3:29   ` Shawn Guo
2017-03-29  3:29     ` Shawn Guo
2017-03-29  3:29     ` Shawn Guo
2017-03-24 16:18 ` [PATCH v2 11/15] ARM: dts: imx6qdl-icore-rqs: Replace codec 'lable: node@addr' Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18 ` [PATCH v2 12/15] ARM: dts: imx6dl-icore: Add LVDS support Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18 ` [PATCH v2 13/15] ARM: dts: imx6dl-icore: Add touchscreen node Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18 ` [PATCH v2 14/15] ARM: dts: imx6qdl-icore-rqs: Add CAN nodes Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18 ` [PATCH v2 15/15] ARM: dts: imx6ul-isiot: Add FEC node support Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-24 16:18   ` Jagan Teki
2017-03-29  3:40 ` [PATCH v2 00/15] ARM: dts: i.MX6: Add lcdif/sound nodes on Engicam SOMs Shawn Guo
2017-03-29  3:40   ` Shawn Guo
2017-03-29  3:40   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490372330-5611-4-git-send-email-jagan@openedev.com \
    --to=jagan@openedev.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.