All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/9] mmc: fsl_esdhc: Move non DM_MMC code in #ifndef CONFIG_DM_MMC
Date: Fri, 12 May 2017 17:18:20 +0530	[thread overview]
Message-ID: <1494589708-15276-2-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1494589708-15276-1-git-send-email-jagan@openedev.com>

From: Jagan Teki <jagan@amarulasolutions.com>

Don't build non DM_MMC code when DM_MMC defined so move
them into #ifndef CONFIG_DM_MMC

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/mmc/fsl_esdhc.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index f3c6358..87c96ad 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -723,20 +723,6 @@ static const struct mmc_ops esdhc_ops = {
 	.getcd		= esdhc_getcd,
 };
 
-static int fsl_esdhc_cfg_to_priv(struct fsl_esdhc_cfg *cfg,
-				 struct fsl_esdhc_priv *priv)
-{
-	if (!cfg || !priv)
-		return -EINVAL;
-
-	priv->esdhc_regs = (struct fsl_esdhc *)(unsigned long)(cfg->esdhc_base);
-	priv->bus_width = cfg->max_bus_width;
-	priv->sdhc_clk = cfg->sdhc_clk;
-	priv->wp_enable  = cfg->wp_enable;
-
-	return 0;
-};
-
 static int fsl_esdhc_init(struct fsl_esdhc_priv *priv)
 {
 	struct fsl_esdhc *regs;
@@ -833,6 +819,21 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv)
 	return 0;
 }
 
+#ifndef CONFIG_DM_MMC
+static int fsl_esdhc_cfg_to_priv(struct fsl_esdhc_cfg *cfg,
+				 struct fsl_esdhc_priv *priv)
+{
+	if (!cfg || !priv)
+		return -EINVAL;
+
+	priv->esdhc_regs = (struct fsl_esdhc *)(unsigned long)(cfg->esdhc_base);
+	priv->bus_width = cfg->max_bus_width;
+	priv->sdhc_clk = cfg->sdhc_clk;
+	priv->wp_enable  = cfg->wp_enable;
+
+	return 0;
+};
+
 int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
 {
 	struct fsl_esdhc_priv *priv;
@@ -871,6 +872,7 @@ int fsl_esdhc_mmc_init(bd_t *bis)
 	cfg->sdhc_clk = gd->arch.sdhc_clk;
 	return fsl_esdhc_initialize(bis, cfg);
 }
+#endif
 
 #ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
 void mmc_adapter_card_type_ident(void)
-- 
1.9.1

  reply	other threads:[~2017-05-12 11:48 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-12 11:48 [U-Boot] [PATCH 0/9] i.MX6: Engicam: Move common config code Jagan Teki
2017-05-12 11:48 ` Jagan Teki [this message]
2017-05-12 11:48 ` [U-Boot] [PATCH 2/9] engicam: Move SPL mmc configs under CONFIG_SPL_BUILD Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 3/9] icorem6: Recover missing nand defconfig Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 4/9] drivers: net: Kconfig: Add PHY_MICREL_KSZ9021 entry Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 5/9] engicam: Move PHY configs to defconfig Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 6/9] icorem6: Remove unused FEC configs Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 7/9] engicam: Set console env on board_late_init Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 8/9] engicam: Add fdt_addr env value based on cpu_type Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 9/9] engicam: Generate single config file Jagan Teki
2017-05-22 10:35 ` [U-Boot] [PATCH 0/9] i.MX6: Engicam: Move common config code Jagan Teki
2017-05-31  8:48 ` Stefano Babic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1494589708-15276-2-git-send-email-jagan@openedev.com \
    --to=jagan@openedev.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.