From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 8/9] engicam: Add fdt_addr env value based on cpu_type
Date: Fri, 12 May 2017 17:18:27 +0530 [thread overview]
Message-ID: <1494589708-15276-9-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1494589708-15276-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Define FDT_ADDR based on the respective SOM, and later patches
will make use of this fdt_addr in single config file.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
include/configs/imx6qdl_icore.h | 5 ++++-
include/configs/imx6qdl_icore_rqs.h | 5 ++++-
include/configs/imx6ul_geam.h | 5 ++++-
include/configs/imx6ul_isiot.h | 5 ++++-
4 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/include/configs/imx6qdl_icore.h b/include/configs/imx6qdl_icore.h
index 7e4d0c1..4f7029d 100644
--- a/include/configs/imx6qdl_icore.h
+++ b/include/configs/imx6qdl_icore.h
@@ -41,7 +41,7 @@
"image=uImage\0" \
"fit_image=fit.itb\0" \
"fdt_high=0xffffffff\0" \
- "fdt_addr=0x18000000\0" \
+ "fdt_addr=" FDT_ADDR "\0" \
"boot_fdt=try\0" \
"mmcpart=1\0" \
"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
@@ -109,6 +109,9 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
+#define DRAM_OFFSET(x) 0x1##x
+#define FDT_ADDR __stringify(DRAM_OFFSET(8000000))
+
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/imx6qdl_icore_rqs.h b/include/configs/imx6qdl_icore_rqs.h
index 525901b..d1e482d 100644
--- a/include/configs/imx6qdl_icore_rqs.h
+++ b/include/configs/imx6qdl_icore_rqs.h
@@ -36,7 +36,7 @@
"image=uImage\0" \
"fit_image=fit.itb\0" \
"fdt_high=0xffffffff\0" \
- "fdt_addr=0x18000000\0" \
+ "fdt_addr=" FDT_ADDR "\0" \
"boot_fdt=try\0" \
"mmcpart=1\0" \
"mmcautodetect=yes\0" \
@@ -91,6 +91,9 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
+#define DRAM_OFFSET(x) 0x1##x
+#define FDT_ADDR __stringify(DRAM_OFFSET(8000000))
+
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/imx6ul_geam.h b/include/configs/imx6ul_geam.h
index 9841686..0502e1b 100644
--- a/include/configs/imx6ul_geam.h
+++ b/include/configs/imx6ul_geam.h
@@ -40,7 +40,7 @@
"image=uImage\0" \
"fit_image=fit.itb\0" \
"fdt_high=0xffffffff\0" \
- "fdt_addr=0x87800000\0" \
+ "fdt_addr=" FDT_ADDR "\0" \
"boot_fdt=try\0" \
"mmcpart=1\0" \
"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
@@ -108,6 +108,9 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
+#define DRAM_OFFSET(x) 0x87##x
+#define FDT_ADDR __stringify(DRAM_OFFSET(800000))
+
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/imx6ul_isiot.h b/include/configs/imx6ul_isiot.h
index f7fbaf2..23aabed 100644
--- a/include/configs/imx6ul_isiot.h
+++ b/include/configs/imx6ul_isiot.h
@@ -41,7 +41,7 @@
"fit_image=fit.itb\0" \
"splashpos=m,m\0" \
"fdt_high=0xffffffff\0" \
- "fdt_addr=0x87800000\0" \
+ "fdt_addr=" FDT_ADDR "\0" \
"boot_fdt=try\0" \
"mmcpart=1\0" \
"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
@@ -108,6 +108,9 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
+#define DRAM_OFFSET(x) 0x87##x
+#define FDT_ADDR __stringify(DRAM_OFFSET(800000))
+
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
--
1.9.1
next prev parent reply other threads:[~2017-05-12 11:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-12 11:48 [U-Boot] [PATCH 0/9] i.MX6: Engicam: Move common config code Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 1/9] mmc: fsl_esdhc: Move non DM_MMC code in #ifndef CONFIG_DM_MMC Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 2/9] engicam: Move SPL mmc configs under CONFIG_SPL_BUILD Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 3/9] icorem6: Recover missing nand defconfig Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 4/9] drivers: net: Kconfig: Add PHY_MICREL_KSZ9021 entry Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 5/9] engicam: Move PHY configs to defconfig Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 6/9] icorem6: Remove unused FEC configs Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 7/9] engicam: Set console env on board_late_init Jagan Teki
2017-05-12 11:48 ` Jagan Teki [this message]
2017-05-12 11:48 ` [U-Boot] [PATCH 9/9] engicam: Generate single config file Jagan Teki
2017-05-22 10:35 ` [U-Boot] [PATCH 0/9] i.MX6: Engicam: Move common config code Jagan Teki
2017-05-31 8:48 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494589708-15276-9-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.