From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/9] engicam: Move SPL mmc configs under CONFIG_SPL_BUILD
Date: Fri, 12 May 2017 17:18:21 +0530 [thread overview]
Message-ID: <1494589708-15276-3-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1494589708-15276-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
- CONFIG_SYS_FSL_USDHC_NUM
- CONFIG_SYS_FSL_ESDHC_ADDR
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
include/configs/imx6qdl_icore.h | 4 ++--
include/configs/imx6qdl_icore_rqs.h | 5 +++--
include/configs/imx6ul_geam.h | 4 ++--
include/configs/imx6ul_isiot.h | 4 ++--
4 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/include/configs/imx6qdl_icore.h b/include/configs/imx6qdl_icore.h
index f783eac..e4efad2 100644
--- a/include/configs/imx6qdl_icore.h
+++ b/include/configs/imx6qdl_icore.h
@@ -139,8 +139,6 @@
/* MMC */
#ifdef CONFIG_FSL_USDHC
# define CONFIG_SYS_MMC_ENV_DEV 0
-# define CONFIG_SYS_FSL_USDHC_NUM 1
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
#endif
/* NAND */
@@ -205,6 +203,8 @@
# include "imx6_spl.h"
# ifdef CONFIG_SPL_BUILD
+# define CONFIG_SYS_FSL_USDHC_NUM 1
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
# undef CONFIG_DM_GPIO
# undef CONFIG_DM_MMC
# endif
diff --git a/include/configs/imx6qdl_icore_rqs.h b/include/configs/imx6qdl_icore_rqs.h
index a639468..4bc42eb 100644
--- a/include/configs/imx6qdl_icore_rqs.h
+++ b/include/configs/imx6qdl_icore_rqs.h
@@ -121,8 +121,6 @@
/* MMC */
#ifdef CONFIG_FSL_USDHC
# define CONFIG_SYS_MMC_ENV_DEV 0
-# define CONFIG_SYS_FSL_USDHC_NUM 2
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
#endif
/* Ethernet */
@@ -139,8 +137,11 @@
/* SPL */
#ifdef CONFIG_SPL
# define CONFIG_SPL_MMC_SUPPORT
+
# include "imx6_spl.h"
# ifdef CONFIG_SPL_BUILD
+# define CONFIG_SYS_FSL_USDHC_NUM 2
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
# undef CONFIG_DM_GPIO
# undef CONFIG_DM_MMC
# endif
diff --git a/include/configs/imx6ul_geam.h b/include/configs/imx6ul_geam.h
index 9f66dd3..19b366e 100644
--- a/include/configs/imx6ul_geam.h
+++ b/include/configs/imx6ul_geam.h
@@ -138,8 +138,6 @@
/* MMC */
#ifdef CONFIG_FSL_USDHC
# define CONFIG_SYS_MMC_ENV_DEV 0
-# define CONFIG_SYS_FSL_USDHC_NUM 1
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
#endif
/* NAND */
@@ -189,6 +187,8 @@
# include "imx6_spl.h"
# ifdef CONFIG_SPL_BUILD
+# define CONFIG_SYS_FSL_USDHC_NUM 1
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
# undef CONFIG_DM_GPIO
# undef CONFIG_DM_MMC
# endif
diff --git a/include/configs/imx6ul_isiot.h b/include/configs/imx6ul_isiot.h
index 5ce70ae..ac89cee 100644
--- a/include/configs/imx6ul_isiot.h
+++ b/include/configs/imx6ul_isiot.h
@@ -138,8 +138,6 @@
/* MMC */
#ifdef CONFIG_FSL_USDHC
# define CONFIG_SYS_MMC_ENV_DEV 0
-# define CONFIG_SYS_FSL_USDHC_NUM 2
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
#endif
/* NAND */
@@ -190,6 +188,8 @@
# include "imx6_spl.h"
# ifdef CONFIG_SPL_BUILD
+# define CONFIG_SYS_FSL_USDHC_NUM 2
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
# undef CONFIG_DM_GPIO
# undef CONFIG_DM_MMC
# endif
--
1.9.1
next prev parent reply other threads:[~2017-05-12 11:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-12 11:48 [U-Boot] [PATCH 0/9] i.MX6: Engicam: Move common config code Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 1/9] mmc: fsl_esdhc: Move non DM_MMC code in #ifndef CONFIG_DM_MMC Jagan Teki
2017-05-12 11:48 ` Jagan Teki [this message]
2017-05-12 11:48 ` [U-Boot] [PATCH 3/9] icorem6: Recover missing nand defconfig Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 4/9] drivers: net: Kconfig: Add PHY_MICREL_KSZ9021 entry Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 5/9] engicam: Move PHY configs to defconfig Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 6/9] icorem6: Remove unused FEC configs Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 7/9] engicam: Set console env on board_late_init Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 8/9] engicam: Add fdt_addr env value based on cpu_type Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 9/9] engicam: Generate single config file Jagan Teki
2017-05-22 10:35 ` [U-Boot] [PATCH 0/9] i.MX6: Engicam: Move common config code Jagan Teki
2017-05-31 8:48 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494589708-15276-3-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.