All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sricharan R <sricharan@codeaurora.org>
To: mark.rutland@arm.com, robh@kernel.org, sudeep.holla@arm.com,
	linux@arm.linux.org.uk, ctatlor97@gmail.com, rjw@rjwysocki.net,
	viresh.kumar@linaro.org, mturquette@baylibre.com,
	linux-pm@vger.kernel.org, sboyd@codeaurora.org,
	linux@armlinux.org.uk, thierry.escande@linaro.org,
	linux-kernel@vger.kernel.org, david.brown@linaro.org,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	andy.gross@linaro.org, linux-soc@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	niklas.cassel@linaro.org
Cc: sricharan@codeaurora.org
Subject: [PATCH v12 03/14] clk: qcom: Add HFPLL driver
Date: Tue, 14 Aug 2018 17:42:22 +0530	[thread overview]
Message-ID: <1534248753-2440-4-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1534248753-2440-1-git-send-email-sricharan@codeaurora.org>

From: Stephen Boyd <sboyd@codeaurora.org>

On some devices (MSM8974 for example), the HFPLLs are
instantiated within the Krait processor subsystem as separate
register regions. Add a driver for these PLLs so that we can
provide HFPLL clocks for use by the system.

Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
 drivers/clk/qcom/Kconfig  |  8 ++++
 drivers/clk/qcom/Makefile |  1 +
 drivers/clk/qcom/hfpll.c  | 96 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 105 insertions(+)
 create mode 100644 drivers/clk/qcom/hfpll.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 0647686..21aec10 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -272,3 +272,11 @@ config SPMI_PMIC_CLKDIV
 	  Technologies, Inc. SPMI PMIC. It configures the frequency of
 	  clkdiv outputs of the PMIC. These clocks are typically wired
 	  through alternate functions on GPIO pins.
+
+config QCOM_HFPLL
+	tristate "High-Frequency PLL (HFPLL) Clock Controller"
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the high-frequency PLLs present on Qualcomm devices.
+	  Say Y if you want to support CPU frequency scaling on devices
+	  such as MSM8974, APQ8084, etc.
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 7818e6c..f82eeac 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -44,3 +44,4 @@ obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
 obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o
 obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/hfpll.c b/drivers/clk/qcom/hfpll.c
new file mode 100644
index 0000000..a6de7101
--- /dev/null
+++ b/drivers/clk/qcom/hfpll.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap.h"
+#include "clk-hfpll.h"
+
+static const struct hfpll_data hdata = {
+	.mode_reg = 0x00,
+	.l_reg = 0x04,
+	.m_reg = 0x08,
+	.n_reg = 0x0c,
+	.user_reg = 0x10,
+	.config_reg = 0x14,
+	.config_val = 0x430405d,
+	.status_reg = 0x1c,
+	.lock_bit = 16,
+
+	.user_val = 0x8,
+	.user_vco_mask = 0x100000,
+	.low_vco_max_rate = 1248000000,
+	.min_rate = 537600000UL,
+	.max_rate = 2900000000UL,
+};
+
+static const struct of_device_id qcom_hfpll_match_table[] = {
+	{ .compatible = "qcom,hfpll" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
+
+static const struct regmap_config hfpll_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= 0x30,
+	.fast_io	= true,
+};
+
+static int qcom_hfpll_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	struct regmap *regmap;
+	struct clk_hfpll *h;
+	struct clk_init_data init = {
+		.parent_names = (const char *[]){ "xo" },
+		.num_parents = 1,
+		.ops = &clk_ops_hfpll,
+	};
+
+	h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
+	if (!h)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	if (of_property_read_string_index(dev->of_node, "clock-output-names",
+					  0, &init.name))
+		return -ENODEV;
+
+	h->d = &hdata;
+	h->clkr.hw.init = &init;
+	spin_lock_init(&h->lock);
+
+	return devm_clk_register_regmap(&pdev->dev, &h->clkr);
+}
+
+static struct platform_driver qcom_hfpll_driver = {
+	.probe		= qcom_hfpll_probe,
+	.driver		= {
+		.name	= "qcom-hfpll",
+		.of_match_table = qcom_hfpll_match_table,
+	},
+};
+module_platform_driver(qcom_hfpll_driver);
+
+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-hfpll");
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: sricharan@codeaurora.org (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v12 03/14] clk: qcom: Add HFPLL driver
Date: Tue, 14 Aug 2018 17:42:22 +0530	[thread overview]
Message-ID: <1534248753-2440-4-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1534248753-2440-1-git-send-email-sricharan@codeaurora.org>

From: Stephen Boyd <sboyd@codeaurora.org>

On some devices (MSM8974 for example), the HFPLLs are
instantiated within the Krait processor subsystem as separate
register regions. Add a driver for these PLLs so that we can
provide HFPLL clocks for use by the system.

Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
 drivers/clk/qcom/Kconfig  |  8 ++++
 drivers/clk/qcom/Makefile |  1 +
 drivers/clk/qcom/hfpll.c  | 96 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 105 insertions(+)
 create mode 100644 drivers/clk/qcom/hfpll.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 0647686..21aec10 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -272,3 +272,11 @@ config SPMI_PMIC_CLKDIV
 	  Technologies, Inc. SPMI PMIC. It configures the frequency of
 	  clkdiv outputs of the PMIC. These clocks are typically wired
 	  through alternate functions on GPIO pins.
+
+config QCOM_HFPLL
+	tristate "High-Frequency PLL (HFPLL) Clock Controller"
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the high-frequency PLLs present on Qualcomm devices.
+	  Say Y if you want to support CPU frequency scaling on devices
+	  such as MSM8974, APQ8084, etc.
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 7818e6c..f82eeac 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -44,3 +44,4 @@ obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
 obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o
 obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/hfpll.c b/drivers/clk/qcom/hfpll.c
new file mode 100644
index 0000000..a6de7101
--- /dev/null
+++ b/drivers/clk/qcom/hfpll.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap.h"
+#include "clk-hfpll.h"
+
+static const struct hfpll_data hdata = {
+	.mode_reg = 0x00,
+	.l_reg = 0x04,
+	.m_reg = 0x08,
+	.n_reg = 0x0c,
+	.user_reg = 0x10,
+	.config_reg = 0x14,
+	.config_val = 0x430405d,
+	.status_reg = 0x1c,
+	.lock_bit = 16,
+
+	.user_val = 0x8,
+	.user_vco_mask = 0x100000,
+	.low_vco_max_rate = 1248000000,
+	.min_rate = 537600000UL,
+	.max_rate = 2900000000UL,
+};
+
+static const struct of_device_id qcom_hfpll_match_table[] = {
+	{ .compatible = "qcom,hfpll" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
+
+static const struct regmap_config hfpll_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= 0x30,
+	.fast_io	= true,
+};
+
+static int qcom_hfpll_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	struct regmap *regmap;
+	struct clk_hfpll *h;
+	struct clk_init_data init = {
+		.parent_names = (const char *[]){ "xo" },
+		.num_parents = 1,
+		.ops = &clk_ops_hfpll,
+	};
+
+	h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
+	if (!h)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	if (of_property_read_string_index(dev->of_node, "clock-output-names",
+					  0, &init.name))
+		return -ENODEV;
+
+	h->d = &hdata;
+	h->clkr.hw.init = &init;
+	spin_lock_init(&h->lock);
+
+	return devm_clk_register_regmap(&pdev->dev, &h->clkr);
+}
+
+static struct platform_driver qcom_hfpll_driver = {
+	.probe		= qcom_hfpll_probe,
+	.driver		= {
+		.name	= "qcom-hfpll",
+		.of_match_table = qcom_hfpll_match_table,
+	},
+};
+module_platform_driver(qcom_hfpll_driver);
+
+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-hfpll");
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2018-08-14 12:12 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-14 12:12 [PATCH V12 00/14] Krait clocks + Krait CPUfreq Sricharan R
2018-08-14 12:12 ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 01/14] ARM: Add Krait L2 register accessor functions Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 02/14] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-14 12:12 ` Sricharan R [this message]
2018-08-14 12:12   ` [PATCH v12 03/14] clk: qcom: Add HFPLL driver Sricharan R
2018-08-14 12:12 ` [PATCH v12 04/14] dt-bindings: clock: Document qcom,hfpll Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 05/14] clk: qcom: Add MSM8960/APQ8064's HFPLLs Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 06/14] clk: qcom: Add IPQ806X's HFPLLs Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 07/14] clk: qcom: Add support for Krait clocks Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 08/14] clk: qcom: Add KPSS ACC/GCC driver Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 09/14] dt-bindings: arm: Document qcom,kpss-gcc Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 10/14] clk: qcom: Add Krait clock controller driver Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 11/14] dt-bindings: clock: Document qcom,krait-cc Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 12/14] clk: qcom: Add safe switch hook for krait mux clocks Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 13/14] cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-17 15:09   ` Rob Herring
2018-08-17 15:09     ` Rob Herring
2018-08-17 15:09     ` Rob Herring
2018-08-20 12:45     ` Sricharan R
2018-08-20 12:45       ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 14/14] cpufreq: qcom: Add support for krait based socs Sricharan R
2018-08-14 12:12   ` Sricharan R
2018-08-17 15:09   ` Rob Herring
2018-08-17 15:09     ` Rob Herring
2018-08-17 15:09     ` Rob Herring
2018-08-24 15:21   ` Niklas Cassel
2018-08-24 15:21     ` Niklas Cassel
2018-08-24 19:15   ` Niklas Cassel
2018-08-24 19:15     ` Niklas Cassel
2018-08-14 12:20 ` [PATCH V12 00/14] Krait clocks + Krait CPUfreq Sricharan R
2018-08-14 12:20   ` Sricharan R
2018-09-07  9:57   ` Sricharan R
2018-09-07  9:57     ` Sricharan R
2018-09-07 14:28     ` Craig Tatlor
2018-09-07 14:28       ` Craig Tatlor
2018-09-07 14:28       ` Craig Tatlor
2018-09-19 20:24       ` Craig
2018-09-19 20:24         ` Craig
2018-09-19 20:24         ` Craig
2018-09-20 13:01         ` Sricharan R
2018-09-20 13:01           ` Sricharan R
2018-09-20 14:27           ` Craig
2018-09-20 14:27             ` Craig
2018-09-20 14:27             ` Craig
2018-09-20 13:03         ` Sricharan R
2018-09-20 13:03           ` Sricharan R
2018-10-17 15:44           ` Stephen Boyd
2018-10-17 15:44             ` Stephen Boyd
2018-10-17 20:16             ` Stephen Boyd
2018-10-17 20:16               ` Stephen Boyd
2018-10-22  4:09               ` Sricharan R
2018-10-22  4:09                 ` Sricharan R
2018-10-22 15:30                 ` Niklas Cassel
2018-10-22 15:30                   ` Niklas Cassel
2018-10-24  4:11                   ` Sricharan R
2018-10-24  4:11                     ` Sricharan R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1534248753-2440-4-git-send-email-sricharan@codeaurora.org \
    --to=sricharan@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=ctatlor97@gmail.com \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=niklas.cassel@linaro.org \
    --cc=rjw@rjwysocki.net \
    --cc=robh@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=sudeep.holla@arm.com \
    --cc=thierry.escande@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.