Re: [PATCH V12 00/14] Krait clocks + Krait CPUfreq

[Niklas Cassel <niklas.cassel@linaro.org>]

On Mon, Oct 22, 2018 at 09:39:03AM +0530, Sricharan R wrote:
> Hi Stephen,
> 
> On 10/18/2018 1:46 AM, Stephen Boyd wrote:
> > Quoting Stephen Boyd (2018-10-17 08:44:12)
> >> Quoting Sricharan R (2018-09-20 06:03:31)
> >>>
> >>>
> >>> On 9/20/2018 1:54 AM, Craig wrote:
> >>>> Yup, this patch seems to have fixed the higher frequencies from the quick test I did.
> >>>>
> >>>       Thanks !!. Can i take that as 
> >>>           Tested-by: Craig Tatlor <ctatlor97@gmail.com>  ?
> >>>
> >>
> >> Is this patch series going to be resent?
> >>
> > 
> > Nevermind. Looking at it I think I can apply all the clk ones and we're
> > good to go. If you can send a followup patch series to change the
> > registration and provider APIs to be clk_hw instead of clk based I would
> > appreciate it.
> > 
> 
> Sorry for the late response. Was away.
> Only pending thing was separating out the binding documentation for the cpu-freq
> driver and fixing the text in documentation.  That means, yes its fine to merge
> the clk ones as you said. I will resend that. Also, will send a follow up series for clk_hw to
> clk change as you mentioned separately.

Hello Sricharan,

Great to see that the clk parts has been marged to clk-next!

Are you also planning on sending out a new version of the cpufreq driver
consolidation parts?

I'm planning on extending your consilidated cpufreq driver with support
for msm8916 (Cortex-A53), where I plan to read PVS/speedbin, in order to
set opp_supported_hw(), and also register with cpufreq (since Viresh/Ulf
suggested that we shouldn't register with cpufreq in the CPR power-domain
driver).


Kind regards,
Niklas