All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
To: "dmaengine@vger.kernel.org" <dmaengine@vger.kernel.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"gustavo.pimentel@synopsys.com" <gustavo.pimentel@synopsys.com>
Cc: "vkoul@kernel.org" <vkoul@kernel.org>,
	"andriy.shevchenko@linux.intel.com"
	<andriy.shevchenko@linux.intel.com>,
	Joao Pinto <joao.pinto@synopsys.com>,
	Alexey Brodkin <alexey.brodkin@synopsys.com>
Subject: [RFC,2/6] dma: Add Synopsys eDMA IP version 0 support
Date: Wed, 12 Dec 2018 13:39:44 +0000	[thread overview]
Message-ID: <1544621983.3270.26.camel@synopsys.com> (raw)

Hi Gustavo,

On Wed, 2018-12-12 at 12:13 +0100, Gustavo Pimentel wrote:
> Add support for the eDMA IP version 0 driver for both register maps (legacy
> and unroll).
[snip]
> diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c
> new file mode 100644
> index 0000000..cc362b0
> --- /dev/null
> +++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
> @@ -0,0 +1,346 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
> +// Synopsys DesignWare eDMA v0 core
> +
> +#include "dw-edma-core.h"
> +#include "dw-edma-v0-core.h"
> +#include "dw-edma-v0-regs.h"
> +#include "dw-edma-v0-debugfs.h"
> +
> +#define QWORD_HI(value)		((value & 0xFFFFFFFF00000000llu) >> 32)
Use upper_32_bits() macros.

> +#define QWORD_LO(value)		(value & 0x00000000FFFFFFFFllu)
Use lower_32_bits() macros.

> +enum dw_edma_control {
> +	DW_EDMA_CB		= BIT(0),
> +	DW_EDMA_TCB		= BIT(1),
> +	DW_EDMA_LLP		= BIT(2),
> +	DW_EDMA_LIE		= BIT(3),
> +	DW_EDMA_RIE		= BIT(4),


[snip]
> +		viewport_sel = (ch & 0x00000007ul);
[snip]
> +void dw_edma_v0_core_off(struct dw_edma *dw)
> +{
> +	SET_BOTH(dw, int_mask, 0x00FF00FFul);
> +	SET_BOTH(dw, int_clear, 0x00FF00FFul);
> +	SET_BOTH(dw, engine_en, 0x00000000ul);
> +}
[snip]
> +		num_ch &= 0x0000000Ful;
> +	} else {
> +		num_ch &= 0x000F0000ul;

I guess it's better to name this magic numbers via defines.


[snip]

> +
> +bool dw_edma_v0_core_status_done_int(struct dw_edma_chan *chan)
> +{
> +	struct dw_edma *dw = chan->chip->dw;
> +	u32 tmp;
> +
> +	tmp = GET_RW(dw, chan->dir, int_status);
> +	tmp &= BIT(chan->id);
> +
> +	return tmp ? true : false;

return !!tmp;

> +}
> +
> +bool dw_edma_v0_core_status_abort_int(struct dw_edma_chan *chan)
> +{
> +	struct dw_edma *dw = chan->chip->dw;
> +	u32 tmp;
> +
> +	tmp = GET_RW(dw, chan->dir, int_status);
> +	tmp &= BIT(chan->id + 16);
> +
> +	return tmp ? true : false;
ditto.

-- 
 Eugeniy Paltsev

WARNING: multiple messages have this Message-ID (diff)
From: Eugeniy Paltsev <eugeniy.paltsev@synopsys.com>
To: "dmaengine@vger.kernel.org" <dmaengine@vger.kernel.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"gustavo.pimentel@synopsys.com" <gustavo.pimentel@synopsys.com>
Cc: "vkoul@kernel.org" <vkoul@kernel.org>,
	"andriy.shevchenko@linux.intel.com" 
	<andriy.shevchenko@linux.intel.com>,
	Joao Pinto <joao.pinto@synopsys.com>,
	Alexey Brodkin <alexey.brodkin@synopsys.com>
Subject: Re: [RFC 2/6] dma: Add Synopsys eDMA IP version 0 support
Date: Wed, 12 Dec 2018 13:39:44 +0000	[thread overview]
Message-ID: <1544621983.3270.26.camel@synopsys.com> (raw)
In-Reply-To: <bb2574d32c7aeb332c79436655f5ab1f9bac540e.1544610287.git.gustavo.pimentel@synopsys.com>

Hi Gustavo,

On Wed, 2018-12-12 at 12:13 +0100, Gustavo Pimentel wrote:
> Add support for the eDMA IP version 0 driver for both register maps (legacy
> and unroll).
[snip]
> diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c
> new file mode 100644
> index 0000000..cc362b0
> --- /dev/null
> +++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
> @@ -0,0 +1,346 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
> +// Synopsys DesignWare eDMA v0 core
> +
> +#include "dw-edma-core.h"
> +#include "dw-edma-v0-core.h"
> +#include "dw-edma-v0-regs.h"
> +#include "dw-edma-v0-debugfs.h"
> +
> +#define QWORD_HI(value)		((value & 0xFFFFFFFF00000000llu) >> 32)
Use upper_32_bits() macros.

> +#define QWORD_LO(value)		(value & 0x00000000FFFFFFFFllu)
Use lower_32_bits() macros.

> +enum dw_edma_control {
> +	DW_EDMA_CB		= BIT(0),
> +	DW_EDMA_TCB		= BIT(1),
> +	DW_EDMA_LLP		= BIT(2),
> +	DW_EDMA_LIE		= BIT(3),
> +	DW_EDMA_RIE		= BIT(4),


[snip]
> +		viewport_sel = (ch & 0x00000007ul);
[snip]
> +void dw_edma_v0_core_off(struct dw_edma *dw)
> +{
> +	SET_BOTH(dw, int_mask, 0x00FF00FFul);
> +	SET_BOTH(dw, int_clear, 0x00FF00FFul);
> +	SET_BOTH(dw, engine_en, 0x00000000ul);
> +}
[snip]
> +		num_ch &= 0x0000000Ful;
> +	} else {
> +		num_ch &= 0x000F0000ul;

I guess it's better to name this magic numbers via defines.


[snip]

> +
> +bool dw_edma_v0_core_status_done_int(struct dw_edma_chan *chan)
> +{
> +	struct dw_edma *dw = chan->chip->dw;
> +	u32 tmp;
> +
> +	tmp = GET_RW(dw, chan->dir, int_status);
> +	tmp &= BIT(chan->id);
> +
> +	return tmp ? true : false;

return !!tmp;

> +}
> +
> +bool dw_edma_v0_core_status_abort_int(struct dw_edma_chan *chan)
> +{
> +	struct dw_edma *dw = chan->chip->dw;
> +	u32 tmp;
> +
> +	tmp = GET_RW(dw, chan->dir, int_status);
> +	tmp &= BIT(chan->id + 16);
> +
> +	return tmp ? true : false;
ditto.

-- 
 Eugeniy Paltsev

             reply	other threads:[~2018-12-12 13:39 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-12 13:39 Eugeniy Paltsev [this message]
2018-12-12 13:39 ` [RFC 2/6] dma: Add Synopsys eDMA IP version 0 support Eugeniy Paltsev
  -- strict thread matches above, loose matches on Subject: below --
2019-01-03 18:00 [RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic Gustavo Pimentel
2019-01-03 18:00 ` [RFC 4/6] " Gustavo Pimentel
2019-01-03 17:35 [RFC,4/6] " Andy Shevchenko
2019-01-03 17:35 ` [RFC 4/6] " Andy Shevchenko
2019-01-03 14:53 [RFC,1/6] dma: Add Synopsys eDMA IP core driver Vinod Koul
2019-01-03 14:53 ` [RFC 1/6] " Vinod Koul
2019-01-03 12:55 [RFC,1/6] " Gustavo Pimentel
2019-01-03 12:55 ` [RFC 1/6] " Gustavo Pimentel
2019-01-03 12:45 [RFC,1/6] " Vinod Koul
2019-01-03 12:45 ` [RFC 1/6] " Vinod Koul
2019-01-03  9:53 [RFC,1/6] " Gustavo Pimentel
2019-01-03  9:53 ` [RFC 1/6] " Gustavo Pimentel
2018-12-18 10:58 [RFC,1/6] " Gustavo Pimentel
2018-12-18 10:58 ` [RFC 1/6] " Gustavo Pimentel
2018-12-18  3:54 [RFC,1/6] " Vinod Koul
2018-12-18  3:54 ` [RFC 1/6] " Vinod Koul
2018-12-17 15:56 [RFC,1/6] " Gustavo Pimentel
2018-12-17 15:56 ` [RFC 1/6] " Gustavo Pimentel
2018-12-17  7:23 [RFC,1/6] " Vinod Koul
2018-12-17  7:23 ` [RFC 1/6] " Vinod Koul
2018-12-17  6:51 [RFC,1/6] " Vinod Koul
2018-12-17  6:51 ` [RFC 1/6] " Vinod Koul
2018-12-13 14:40 [RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic Gustavo Pimentel
2018-12-13 14:40 ` [RFC 4/6] " Gustavo Pimentel
2018-12-13 11:51 [RFC,2/6] dma: Add Synopsys eDMA IP version 0 support Gustavo Pimentel
2018-12-13 11:51 ` [RFC 2/6] " Gustavo Pimentel
2018-12-13 11:49 [RFC,6/6] pci: pci_ids: Add Synopsys device id 0xedda Gustavo Pimentel
2018-12-13 11:49 ` [RFC 6/6] " Gustavo Pimentel
2018-12-13 11:03 [RFC,1/6] dma: Add Synopsys eDMA IP core driver Gustavo Pimentel
2018-12-13 11:03 ` [RFC 1/6] " Gustavo Pimentel
2018-12-12 23:03 [RFC,6/6] pci: pci_ids: Add Synopsys device id 0xedda Bjorn Helgaas
2018-12-12 23:03 ` [RFC 6/6] " Bjorn Helgaas
2018-12-12 23:00 [RFC,1/6] dma: Add Synopsys eDMA IP core driver Bjorn Helgaas
2018-12-12 23:00 ` [RFC 1/6] " Bjorn Helgaas
2018-12-12 13:25 [RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic Andy Shevchenko
2018-12-12 13:25 ` [RFC 4/6] " Andy Shevchenko
2018-12-12 11:13 [RFC,6/6] pci: pci_ids: Add Synopsys device id 0xedda Gustavo Pimentel
2018-12-12 11:13 ` [RFC 6/6] " Gustavo Pimentel
2018-12-12 11:13 [RFC,5/6] MAINTAINERS: Add Synopsys eDMA IP driver maintainer Gustavo Pimentel
2018-12-12 11:13 ` [RFC 5/6] " Gustavo Pimentel
2018-12-12 11:13 [RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic Gustavo Pimentel
2018-12-12 11:13 ` [RFC 4/6] " Gustavo Pimentel
2018-12-12 11:13 [RFC,3/6] dma: Add Synopsys eDMA IP version 0 debugfs support Gustavo Pimentel
2018-12-12 11:13 ` [RFC 3/6] " Gustavo Pimentel
2018-12-12 11:13 [RFC,2/6] dma: Add Synopsys eDMA IP version 0 support Gustavo Pimentel
2018-12-12 11:13 ` [RFC 2/6] " Gustavo Pimentel
2018-12-12 11:13 [RFC,1/6] dma: Add Synopsys eDMA IP core driver Gustavo Pimentel
2018-12-12 11:13 ` [RFC 1/6] " Gustavo Pimentel
2018-12-12 11:13 [RFC 0/6] dma: Add Synopsys eDMA IP driver (version 0) Gustavo Pimentel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1544621983.3270.26.camel@synopsys.com \
    --to=eugeniy.paltsev@synopsys.com \
    --cc=alexey.brodkin@synopsys.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=joao.pinto@synopsys.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.