All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org,
	Richard Weinberger <richard@nod.at>,
	Julien Su <juliensu@mxic.com.tw>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	Mark Brown <broonie@kernel.org>,
	Xiangsheng Hou <Xiangsheng.Hou@mediatek.com>,
	devicetree@vger.kernel.org, Jaime Liao <jaimeliao@mxic.com.tw>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 03/18] dt-bindings: mtd: nand-chip: Create a NAND chip description
Date: Wed, 20 Oct 2021 16:14:47 -0500	[thread overview]
Message-ID: <1634764487.024191.2962583.nullmailer@robh.at.kernel.org> (raw)
In-Reply-To: <20211020142809.349347-4-miquel.raynal@bootlin.com>

On Wed, 20 Oct 2021 16:27:54 +0200, Miquel Raynal wrote:
> Move the NAND chip description out of the NAND controller file. Indeed,
> a subsequent part of the properties supported by a raw NAND chip are
> also supported by SPI-NAND chips. So let's create a generic NAND chip
> description which will be pulled by nand-controller.yaml and later by
> spi-nand.yaml as well.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  .../devicetree/bindings/mtd/nand-chip.yaml    | 71 +++++++++++++++++++
>  .../bindings/mtd/nand-controller.yaml         | 53 ++------------
>  2 files changed, 75 insertions(+), 49 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/nand-chip.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.example.dt.yaml: nand-controller@f0442800: nand@1: '#address-cells', '#size-cells', 'compatible', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.example.dt.yaml: nand-controller@f0442800: nand@1: '#address-cells', '#size-cells', 'compatible', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.example.dt.yaml: nand-controller@10000200: nand@0: '#address-cells', '#size-cells', 'compatible', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.example.dt.yaml: nand-controller@10000200: nand@0: '#address-cells', '#size-cells', 'compatible', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/ingenic,nand.example.dt.yaml: nand-controller@1: nand@1: 'nand-ecc-mode', 'nand-on-flash-bbt', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/ingenic,nand.example.dt.yaml: nand-controller@1: nand@1: 'nand-ecc-mode', 'nand-on-flash-bbt', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.example.dt.yaml: nand-controller@ff4b0000: nand@0: 'label', 'nand-bus-width', 'nand-ecc-mode', 'nand-is-boot-medium', 'rockchip,boot-blks', 'rockchip,boot-ecc-strength' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.example.dt.yaml: nand-controller@ff4b0000: nand@0: 'label', 'nand-bus-width', 'nand-ecc-mode', 'nand-is-boot-medium', 'rockchip,boot-blks', 'rockchip,boot-ecc-strength' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.example.dt.yaml: nand-controller@58002000: nand@0: '#address-cells', '#size-cells', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.example.dt.yaml: nand-controller@58002000: nand@0: '#address-cells', '#size-cells', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/intel,lgm-nand.example.dt.yaml: nand-controller@e0f00000: nand@0: 'nand-ecc-mode' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/intel,lgm-nand.example.dt.yaml: nand-controller@e0f00000: nand@0: 'nand-ecc-mode' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/intel,lgm-nand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.example.dt.yaml: nand-controller@1ac00000: nand@0: 'nand-bus-width', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.example.dt.yaml: nand-controller@1ac00000: nand@0: 'nand-bus-width', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.example.dt.yaml: nand-controller@79b0000: nand@0: 'nand-bus-width', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.example.dt.yaml: nand-controller@79b0000: nand@0: 'nand-bus-width', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.example.dt.yaml: nand-controller@4,0: nand@0: '#address-cells', '#size-cells', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.example.dt.yaml: nand-controller@4,0: nand@0: '#address-cells', '#size-cells', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1543921

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org,
	Richard Weinberger <richard@nod.at>,
	Julien Su <juliensu@mxic.com.tw>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	Mark Brown <broonie@kernel.org>,
	Xiangsheng Hou <Xiangsheng.Hou@mediatek.com>,
	devicetree@vger.kernel.org, Jaime Liao <jaimeliao@mxic.com.tw>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 03/18] dt-bindings: mtd: nand-chip: Create a NAND chip description
Date: Wed, 20 Oct 2021 16:14:47 -0500	[thread overview]
Message-ID: <1634764487.024191.2962583.nullmailer@robh.at.kernel.org> (raw)
In-Reply-To: <20211020142809.349347-4-miquel.raynal@bootlin.com>

On Wed, 20 Oct 2021 16:27:54 +0200, Miquel Raynal wrote:
> Move the NAND chip description out of the NAND controller file. Indeed,
> a subsequent part of the properties supported by a raw NAND chip are
> also supported by SPI-NAND chips. So let's create a generic NAND chip
> description which will be pulled by nand-controller.yaml and later by
> spi-nand.yaml as well.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  .../devicetree/bindings/mtd/nand-chip.yaml    | 71 +++++++++++++++++++
>  .../bindings/mtd/nand-controller.yaml         | 53 ++------------
>  2 files changed, 75 insertions(+), 49 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/nand-chip.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.example.dt.yaml: nand-controller@f0442800: nand@1: '#address-cells', '#size-cells', 'compatible', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.example.dt.yaml: nand-controller@f0442800: nand@1: '#address-cells', '#size-cells', 'compatible', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.example.dt.yaml: nand-controller@10000200: nand@0: '#address-cells', '#size-cells', 'compatible', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/brcm,brcmnand.example.dt.yaml: nand-controller@10000200: nand@0: '#address-cells', '#size-cells', 'compatible', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/ingenic,nand.example.dt.yaml: nand-controller@1: nand@1: 'nand-ecc-mode', 'nand-on-flash-bbt', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/ingenic,nand.example.dt.yaml: nand-controller@1: nand@1: 'nand-ecc-mode', 'nand-on-flash-bbt', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.example.dt.yaml: nand-controller@ff4b0000: nand@0: 'label', 'nand-bus-width', 'nand-ecc-mode', 'nand-is-boot-medium', 'rockchip,boot-blks', 'rockchip,boot-ecc-strength' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.example.dt.yaml: nand-controller@ff4b0000: nand@0: 'label', 'nand-bus-width', 'nand-ecc-mode', 'nand-is-boot-medium', 'rockchip,boot-blks', 'rockchip,boot-ecc-strength' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.example.dt.yaml: nand-controller@58002000: nand@0: '#address-cells', '#size-cells', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.example.dt.yaml: nand-controller@58002000: nand@0: '#address-cells', '#size-cells', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/intel,lgm-nand.example.dt.yaml: nand-controller@e0f00000: nand@0: 'nand-ecc-mode' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/intel,lgm-nand.example.dt.yaml: nand-controller@e0f00000: nand@0: 'nand-ecc-mode' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/intel,lgm-nand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.example.dt.yaml: nand-controller@1ac00000: nand@0: 'nand-bus-width', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.example.dt.yaml: nand-controller@1ac00000: nand@0: 'nand-bus-width', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.example.dt.yaml: nand-controller@79b0000: nand@0: 'nand-bus-width', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.example.dt.yaml: nand-controller@79b0000: nand@0: 'nand-bus-width', 'partitions' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.example.dt.yaml: nand-controller@4,0: nand@0: '#address-cells', '#size-cells', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.example.dt.yaml: nand-controller@4,0: nand@0: '#address-cells', '#size-cells', 'nand-on-flash-bbt' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1543921

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


  reply	other threads:[~2021-10-20 21:15 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-20 14:27 [PATCH 00/18] External ECC engines & Macronix support Miquel Raynal
2021-10-20 14:27 ` Miquel Raynal
2021-10-20 14:27 ` [PATCH 01/18] dt-bindings: mtd: nand-controller: Fix the reg property description Miquel Raynal
2021-10-20 14:27   ` Miquel Raynal
2021-10-28 21:25   ` Rob Herring
2021-10-28 21:25     ` Rob Herring
2021-10-20 14:27 ` [PATCH 02/18] dt-bindings: mtd: nand-controller: Fix a comment in the examples Miquel Raynal
2021-10-20 14:27   ` Miquel Raynal
2021-10-28 21:26   ` Rob Herring
2021-10-28 21:26     ` Rob Herring
2021-10-20 14:27 ` [PATCH 03/18] dt-bindings: mtd: nand-chip: Create a NAND chip description Miquel Raynal
2021-10-20 14:27   ` Miquel Raynal
2021-10-20 21:14   ` Rob Herring [this message]
2021-10-20 21:14     ` Rob Herring
2021-10-22 22:47   ` Rob Herring
2021-10-22 22:47     ` Rob Herring
2021-10-20 14:27 ` [PATCH 04/18] dt-bindings: mtd: spi-nand: Convert spi-nand description file to yaml Miquel Raynal
2021-10-20 14:27   ` Miquel Raynal
2021-10-20 21:14   ` Rob Herring
2021-10-20 21:14     ` Rob Herring
2021-10-21 14:09     ` Miquel Raynal
2021-10-21 14:09       ` Miquel Raynal
2021-10-22 22:36       ` Rob Herring
2021-10-22 22:36         ` Rob Herring
2021-11-24 13:54         ` Miquel Raynal
2021-11-24 13:54           ` Miquel Raynal
2021-10-28 21:28   ` Rob Herring
2021-10-28 21:28     ` Rob Herring
2021-10-20 14:27 ` [PATCH 05/18] dt-bindings: vendor-prefixes: Clarify Macronix prefix Miquel Raynal
2021-10-20 14:27   ` Miquel Raynal
2021-10-28 21:31   ` Rob Herring
2021-10-28 21:31     ` Rob Herring
2021-10-20 14:27 ` [PATCH 06/18] dt-bindings: spi: mxic: The interrupt property is not mandatory Miquel Raynal
2021-10-20 14:27   ` Miquel Raynal
2021-10-28 21:32   ` Rob Herring
2021-10-28 21:32     ` Rob Herring
2021-10-20 14:27 ` [PATCH 07/18] dt-bindings: spi: mxic: Convert to yaml Miquel Raynal
2021-10-20 14:27   ` Miquel Raynal
2021-10-28 21:34   ` Rob Herring
2021-10-28 21:34     ` Rob Herring
2021-10-20 14:27 ` [PATCH 08/18] dt-bindings: mtd: Describe Macronix NAND ECC engine Miquel Raynal
2021-10-20 14:27   ` Miquel Raynal
2021-10-28 21:35   ` Rob Herring
2021-10-28 21:35     ` Rob Herring
2021-10-20 14:28 ` [PATCH 09/18] dt-bindings: spi: mxic: Document the nand-ecc-engine property Miquel Raynal
2021-10-20 14:28   ` Miquel Raynal
2021-10-28 21:38   ` Rob Herring
2021-10-28 21:38     ` Rob Herring
2021-10-20 14:28 ` [PATCH 10/18] mtd: spinand: macronix: Use random program load Miquel Raynal
2021-10-20 14:28   ` Miquel Raynal
2021-10-20 14:28 ` [PATCH 11/18] mtd: nand: ecc: Add infrastructure to support hardware engines Miquel Raynal
2021-10-20 14:28   ` Miquel Raynal
2021-10-20 14:28 ` [PATCH 12/18] mtd: nand: mxic-ecc: Add Macronix external ECC engine support Miquel Raynal
2021-10-20 14:28   ` Miquel Raynal
2021-10-20 14:28 ` [PATCH 13/18] mtd: nand: mxic-ecc: Support SPI pipelined mode Miquel Raynal
2021-10-20 14:28   ` Miquel Raynal
2021-10-21  5:22   ` kernel test robot
2021-10-21  5:22     ` kernel test robot
2021-10-21  5:22     ` kernel test robot
2021-10-20 14:28 ` [PATCH 14/18] spi: mxic: Fix the transmit path Miquel Raynal
2021-10-20 14:28   ` Miquel Raynal
2021-10-20 14:28 ` [PATCH 15/18] spi: mxic: Create a helper to configure the controller before an operation Miquel Raynal
2021-10-20 14:28   ` Miquel Raynal
2021-10-20 14:28 ` [PATCH 16/18] spi: mxic: Create a helper to ease the start of " Miquel Raynal
2021-10-20 14:28   ` Miquel Raynal
2021-10-20 14:28 ` [PATCH 17/18] spi: mxic: Add support for direct mapping Miquel Raynal
2021-10-20 14:28   ` Miquel Raynal
2021-10-20 14:28 ` [PATCH 18/18] spi: mxic: Add support for pipelined ECC operations Miquel Raynal
2021-10-20 14:28   ` Miquel Raynal
2021-10-20 19:39   ` kernel test robot
2021-10-20 19:39     ` kernel test robot
2021-10-20 19:39     ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1634764487.024191.2962583.nullmailer@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=Xiangsheng.Hou@mediatek.com \
    --cc=boris.brezillon@collabora.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jaimeliao@mxic.com.tw \
    --cc=juliensu@mxic.com.tw \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.