[parisc-linux] New cross-compiler

[parisc-linux] New cross-compiler

[Matt Taggart]

I have placed a new i386-linux -> hppa32/64-linux cross compiler (with 32bit 
glibc) in,

ftp://puffin.external.hp.com/pub/parisc/binaries/LinuxX86/xc-20001031.tar.gz

It includes Alan Modra's recent fix for the 64 bit compiler,

http://puffin.external.hp.com/mailing-lists/parisc-linux-cvs/2000/10-Oct/0233.h
tml

-- 
Matt Taggart
taggart@fc.hp.com

[parisc-linux] Boot command

[Kailashnath V Rampure]

Hi,
I have run the following command to initialize the sda harddisk. The sda3 
is the linux native partion.
Wen I say boot on the HP server  it is trying to boot from /stand/vmunix 
instead of vmlinux can any one help me about the command. Secondaly I want 
to knwo what is the term type as its not taking vt100 so I am unable to 
open vi.

I have made nesessary changes for the /etc/fstab

$ palo -I -k /boot/vmlinux -b /boot/iplboot -c '3/boot/vmlinux TERM=linux 
HOME=/ root=/dev/sda3' /dev/sda

regards
Kailas

Re: [parisc-linux] Boot command

[Grant Grundler]

Kailashnath V Rampure wrote:
> Hi,
> I have run the following command to initialize the sda harddisk. The sda3 
> is the linux native partion.
> Wen I say boot on the HP server  it is trying to boot from /stand/vmunix 
> instead of vmlinux can any one help me about the command.

Sounds like your system is booting from an existing HPUX installed disk.
Ie you are not using palo.

> Secondaly I want 
> to knwo what is the term type as its not taking vt100 so I am unable to 
> open vi.

TERM=linux is what I've seen before.
The debian ncurses package might need to be installed first though
and vt100 should work too.

Search the mail archive at
	http://puffin.external.hp.com/cgi-bin/mailgrep

grant

> 
> I have made nesessary changes for the /etc/fstab
> 
> $ palo -I -k /boot/vmlinux -b /boot/iplboot -c '3/boot/vmlinux TERM=linux 
> HOME=/ root=/dev/sda3' /dev/sda
> 
> regards
> Kailas
> 
> ---------------------------------------------------------------------------
> To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with
> `unsubscribe' as the subject.
> 

Grant Grundler
Unix Systems Enablement Lab
+1.408.447.7253

Re: [parisc-linux] Boot command

[Matt Taggart]

Kailashnath V Rampure writes...

> Hi,
> I have run the following command to initialize the sda harddisk. The sda3 
> is the linux native partion.
> Wen I say boot on the HP server  it is trying to boot from /stand/vmunix 
> instead of vmlinux can any one help me about the command.

This means that you are somehow still booting an HP-UX lifimage. Did you 
follow the directions on,

http://www.thepuffingroup.com/parisc/install.html

including the partitioning stuff? Maybe you're still booting off another disk, 
are you sure you're booting from the linux disk?

HTH,

-- 
Matt Taggart
taggart@fc.hp.com

Re: [parisc-linux] Boot command

[Kailashnath V Rampure]

Yes I have been following the same Doc.
its tries to boot from the sda  as I can see the hard disk path. I have 2 
Hdd's one sda and other sdb. the path are 8/16/5.6 and other is 8/16/5.0. 
Here I think /dev/sda is 8/16/5.6.

It is trying to boot but give sthe following o/p:

Boot IO Dependent Code (IODC) revision 144
.... SUCCEEDED!

HARD Booted.
palo ipl bame@noam Tue Oct 31 14:18:02 MST 2000
0/vmlinux 208896 bytes @ 0x1f78c000
0/palo-cmdline '3/boot/vmlinux TERM=linux Home=/ root=/dev/sdb3'
/dev/ida1       82      62              1030688
/dev/ida2       f0      1030750 24738
/dev/ida3       83      1055488 1030750
Kernel:partition 3 file /boot/vmlinux
ext2 block size 1024
ext2_mount(partition 3) returns 0
ext2_open(/boot/vmlinux)=3
Couldn't gork your kernel executabel format failed to load kernel
Failed to load Kernel.

please suggest.

At 06:47 PM 11/2/00 -0700, Matt Taggart wrote:

>Kailashnath V Rampure writes...
>
> > Hi,
> > I have run the following command to initialize the sda harddisk. The sda3
> > is the linux native partion.
> > Wen I say boot on the HP server  it is trying to boot from /stand/vmunix
> > instead of vmlinux can any one help me about the command.
>
>This means that you are somehow still booting an HP-UX lifimage. Did you
>follow the directions on,
>
>http://www.thepuffingroup.com/parisc/install.html
>
>including the partitioning stuff? Maybe you're still booting off another 
>disk,
>are you sure you're booting from the linux disk?
>
>HTH,
>
>--
>Matt Taggart
>taggart@fc.hp.com

Re: [parisc-linux] Boot command

[Grant Grundler]

Kailashnath V Rampure wrote:
> Yes I have been following the same Doc.
> its tries to boot from the sda  as I can see the hard disk path. I have 2 
> Hdd's one sda and other sdb. the path are 8/16/5.6 and other is 8/16/5.0. 
> Here I think /dev/sda is 8/16/5.6.

The lower numbered SCSI ID will be /dev/sda.
SCSI devices are lettered in the order they are discovered.
The order is reflected in /proc/scsi/scsi.

grant

Grant Grundler
Unix Systems Enablement Lab
+1.408.447.7253

Re: [parisc-linux] Boot command

[Kailashnath V Rampure]

I have removed the 2nd HDD now the boot is trying but I get the same error:
my fstab reads as :

# /etc/fstab: static file system information.
#
# <file system> <mount> <type>  <options>                       <dump> <pass>
#/dev/sda1      /boot   ext2    defaults,errors=remount-ro      0       0
#/dev/sda2      none    swap    sw                              0       0
/dev/sda3       /       ext2    defaults,errors=remount-ro      0       0
# proc          /proc   proc    defaults                        0       0


The erros is as follows:
Boot IO Dependent Code (IODC) revision 144
.... SUCCEEDED!
HARD Booted.
palo ipl bame@noam Tue Oct 31 14:18:02 MST 2000
0/vmlinux 208896 bytes @ 0x1f78c000
0/palo-cmdline '3/boot/vmlinux TERM=linux Home=/ root=/dev/sda3'
/dev/ida1 82 62 1030688
/dev/ida2 f0 1030750 24738
/dev/ida3 83 1055488 1030750
Kernel:partition 3 file /boot/vmlinux
ext2 block size 1024
ext2_mount(partition 3) returns 0
ext2_open(/boot/vmlinux)=3
Couldn't gork your kernel executabel format failed to load kernel
Failed to load Kernel.

Please suggest.

Re: [parisc-linux] Boot command

[Paul Bame]

= ext2_open(/boot/vmlinux)=3
= Couldn't gork your kernel executabel format failed to load kernel
= Failed to load Kernel.

That should be "grok" :-)  Apparently you're not using cut/paste for
these error messages.

This is PALO saying that /boot/vmlinux is neither elf32, elf64, nor SOM
format.  I'm guessing, based on some earlier advice I gave when you
were net-booting, that you may have a lifimage there by mistake -- you
need a kernel instead, for example from
ftp://puffin.external.hp.com/pub/parisc/binaries/kernels

To tell for sure, run 'file vmlinux' on that file.  If you get
    vmlinux: 8086 relocatable (Microsoft)
that's probably a lifimage.  You should get this instead:
    vmlinux: ELF 32-bit MSB executable, PA-RISC, version 1, statically linked, not stripped


	-P

Re: [parisc-linux] Boot command

[Kailashnath V Rampure]

Thanks!  Paul.
Yes I had copied the lifImage there. Now I have downloaded the kernel from 
the link you mentioned.

I am still unable to use vi as it says "linux:unknown terminal type"
Can you help me.

To add features can I add deb packages. I am not that familiar with debian.
Actually I want to build an apache + mod_ssl+mod_perl on A180c.
Regards
Kailas

At 01:30 PM 11/3/00 -0700, Paul Bame wrote:
>= ext2_open(/boot/vmlinux)=3
>= Couldn't gork your kernel executabel format failed to load kernel
>= Failed to load Kernel.
>
>That should be "grok" :-)  Apparently you're not using cut/paste for
>these error messages.
>
>This is PALO saying that /boot/vmlinux is neither elf32, elf64, nor SOM
>format.  I'm guessing, based on some earlier advice I gave when you
>were net-booting, that you may have a lifimage there by mistake -- you
>need a kernel instead, for example from
>ftp://puffin.external.hp.com/pub/parisc/binaries/kernels
>
>To tell for sure, run 'file vmlinux' on that file.  If you get
>     vmlinux: 8086 relocatable (Microsoft)
>that's probably a lifimage.  You should get this instead:
>     vmlinux: ELF 32-bit MSB executable, PA-RISC, version 1, statically 
> linked, not stripped
>
>
>         -P

Re: [parisc-linux] Boot command

[Kailashnath V Rampure]

Hi,
Thanks. I copied the termcap and terminfo directory froma red hat linux 
box. Now I am able to run VI and the TERM is vt100.

Regards
Kailas

At 02:56 PM 11/5/00 +0100, Thierry SIMONNET wrote:
>To have a suitable TERM, you must get termcap or terminfo definition; ie a
>good terminfo tree from a linux box. To have a good method to install a
>pa/linux box, see my student's web site at http://www.esiee.fr/~djoudim
>
>Th. SIMONNET
>
>
>Kailashnath V Rampure wrote:
>
> > Thanks!  Paul.
> > Yes I had copied the lifImage there. Now I have downloaded the kernel from
> > the link you mentioned.
> >
> > I am still unable to use vi as it says "linux:unknown terminal type"
> > Can you help me.
> >
> > To add features can I add deb packages. I am not that familiar with debian.
> > Actually I want to build an apache + mod_ssl+mod_perl on A180c.
> > Regards
> > Kailas
> >
> > At 01:30 PM 11/3/00 -0700, Paul Bame wrote:
> > >= ext2_open(/boot/vmlinux)=3
> > >= Couldn't gork your kernel executabel format failed to load kernel
> > >= Failed to load Kernel.
> > >
> > >That should be "grok" :-)  Apparently you're not using cut/paste for
> > >these error messages.
> > >
> > >This is PALO saying that /boot/vmlinux is neither elf32, elf64, nor SOM
> > >format.  I'm guessing, based on some earlier advice I gave when you
> > >were net-booting, that you may have a lifimage there by mistake -- you
> > >need a kernel instead, for example from
> > >ftp://puffin.external.hp.com/pub/parisc/binaries/kernels
> > >
> > >To tell for sure, run 'file vmlinux' on that file.  If you get
> > >     vmlinux: 8086 relocatable (Microsoft)
> > >that's probably a lifimage.  You should get this instead:
> > >     vmlinux: ELF 32-bit MSB executable, PA-RISC, version 1, statically
> > > linked, not stripped
> > >
> > >
> > >         -P
> >
> > ---------------------------------------------------------------------------
> > To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with
> > `unsubscribe' as the subject.

Re: [parisc-linux] Boot command

[Grant Grundler]

Kailashnath V Rampure wrote:
> Hi,
> Thanks. I copied the termcap and terminfo directory froma red hat linux 
> box. Now I am able to run VI and the TERM is vt100.

I've added a "vi is complaining" item to the FAQ.

Normally the FAQ lives at 
	http://www.thepuffingroup.com/parisc/faq.html

but it's not updated yet. I've put a temporary copy at

	http://puffin.external.hp.com/~grundler/faq.html

and will remove this once the regular location is updated.
(Hint - relative links won't work from my copy)

grant

Grant Grundler
Unix Systems Enablement Lab
+1.408.447.7253

Re: [parisc-linux] Boot command

[Thomas Marteau]

----- Original Message -----
From: Grant Grundler <grundler@cup.hp.com>
To: Kailashnath V Rampure <kailasr@webcash.com>
Cc: <parisc-linux@thepuffingroup.com>
Sent: Tuesday, November 07, 2000 8:19 PM
Subject: Re: [parisc-linux] Boot command


> Kailashnath V Rampure wrote:
> > Hi,
> > Thanks. I copied the termcap and terminfo directory froma red hat linux
> > box. Now I am able to run VI and the TERM is vt100.
>
> I've added a "vi is complaining" item to the FAQ.
To use vi and all these applications like top, they need the terminfo
directory in /usr/share from any distrib!!

Bye, the ESIEE Team

Re: [parisc-linux] Boot command

[Grant Grundler]

"Thomas Marteau" wrote:
> Grant Grundler wrote:
> > Kailashnat V Rampure wrote:
> > > Hi,
> > > Thanks. I copied the termcap and terminfo directory froma red hat linux
> > > box. Now I am able to run VI and the TERM is vt100.
> >
> > I've added a "vi is complaining" item to the FAQ.
>
> To use vi and all these applications like top, they need the terminfo
> directory in /usr/share from any distrib!!

I didn't say taking from RH was wrong.
IMHO, doing so defeats the whole point of debian's packaging system.

Please read the new FAQ entry and tell me if I've gotten
that right or not.

grant

Grant Grundler
Unix Systems Enablement Lab
+1.408.447.7253

Re: [parisc-linux] Boot command

[Kailashnath V Rampure]

I agree with you regarding taking from RH. I just wanted to let u all know 
how I solved the issue. I have gone through the faq it is fine.

Regards
Kailas

At 12:24 PM 11/7/00 -0800, Grant Grundler wrote:
>"Thomas Marteau" wrote:
> > Grant Grundler wrote:
> > > Kailashnat V Rampure wrote:
> > > > Hi,
> > > > Thanks. I copied the termcap and terminfo directory froma red hat linux
> > > > box. Now I am able to run VI and the TERM is vt100.
> > >
> > > I've added a "vi is complaining" item to the FAQ.
> >
> > To use vi and all these applications like top, they need the terminfo
> > directory in /usr/share from any distrib!!
>
>I didn't say taking from RH was wrong.
>IMHO, doing so defeats the whole point of debian's packaging system.
>
>Please read the new FAQ entry and tell me if I've gotten
>that right or not.
>
>grant
>
>Grant Grundler
>Unix Systems Enablement Lab
>+1.408.447.7253
>
>---------------------------------------------------------------------------
>To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with
>`unsubscribe' as the subject.

Re: [parisc-linux] Boot command

[Kailashnath V Rampure]

I have booted HP A class server through network. On that I have repartioned 
the system and followed the steps on http://www.parisc-linux.org/install.html.
I have used the following command to initialize the hard disk. The kernel I 
have downloaded is vmlinux-20001018. and cpied it to /mnt/boot/vmlinux 
after mounting /dev/sda3. I have used the following command to initialize 
the HDD.

palo -I -k /boot/vmlinux -b /boot/iplboot \ -c '3/boot/vmlinux TERM=linux 
HOME=/ root=/dev/sda3' \ /dev/sda
--------------------------------
I get the following error:
--------------------------------
SOFT Boot.
palo ipl bame@noam Tue oct 31 14:18:02 MST 2000
0/vmlinux 2138614 bytes@ 0x1f78c000
0/palo-cmdline '3/boot/vmlinux TERM=linux HOME=/ root=/dev/sda3'
/dev/ida1	82	62		1030688
/dev/ida2	f0	1030750	24738
/dev/ida3	83	1055488	1030750
Kernel:partition 3 file /boot/vmlinux
ext2 block size 1024
ext2_mount(partition 3) returns 0
ext2_open(/boot/vmlinux) = -1
open /boot/vmlinux failed
-------------------------------------
Please suggest.

Re: [parisc-linux] Boot command

[Kailashnath V Rampure]

Yes Thomas the vmlinux is in /boot of 3rd partition as the other partitions 
are swap and f0.

At 11:48 AM 11/15/00 +0100, Thomas Marteau wrote:

>----- Original Message -----
>From: Kailashnath V Rampure <kailasr@webcash.com>
>To: Paul Bame <bame@noam.fc.hp.com>
>Cc: Grant Grundler <grundler@cup.hp.com>; Matt Taggart
><taggart@carmen.fc.hp.com>; <parisc-linux@thepuffingroup.com>
>Sent: Tuesday, November 14, 2000 11:58 PM
>Subject: Re: [parisc-linux] Boot command
>
>
> > I have booted HP A class server through network. On that I have
>repartioned
> > the system and followed the steps on
>http://www.parisc-linux.org/install.html.
> > I have used the following command to initialize the hard disk. The kernel
>I
> > have downloaded is vmlinux-20001018. and cpied it to /mnt/boot/vmlinux
> > after mounting /dev/sda3. I have used the following command to initialize
> > the HDD.
> >
> > palo -I -k /boot/vmlinux -b /boot/iplboot \ -c '3/boot/vmlinux TERM=linux
> > HOME=/ root=/dev/sda3' \ /dev/sda
>
>This means that vmlinux must be in /boot in your third partition on your
>disk.
>Is it true in your case?
>
> > --------------------------------
> > I get the following error:
> > --------------------------------
> > SOFT Boot.
> > palo ipl bame@noam Tue oct 31 14:18:02 MST 2000
> > 0/vmlinux 2138614 bytes@ 0x1f78c000
> > 0/palo-cmdline '3/boot/vmlinux TERM=linux HOME=/ root=/dev/sda3'
> > /dev/ida1 82 62 1030688
> > /dev/ida2 f0 1030750 24738
> > /dev/ida3 83 1055488 1030750
> > Kernel:partition 3 file /boot/vmlinux
> > ext2 block size 1024
> > ext2_mount(partition 3) returns 0
> > ext2_open(/boot/vmlinux) = -1
> > open /boot/vmlinux failed
> > -------------------------------------
> > Please suggest.
> >
> > --------------------------------------------------------------------------
>-
> > To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com
>with
> > `unsubscribe' as the subject.
> >
> >

Re: [parisc-linux] Boot command

[Thomas Marteau]

Hi again,

    You put the swap partition before the f0 partition and here it is the f0
partition in first position.
    Also, your hard disk is ida instead of sda, what's that ?

Bye,

ESIEE Team
----- Original Message -----
From: Kailashnath V Rampure <kailasr@webcash.com>
To: Thomas Marteau <marteaut@esiee.fr>
Cc: <parisc-linux@puffin.external.hp.com>
Sent: Wednesday, November 15, 2000 6:55 PM
Subject: Re: [parisc-linux] Boot command


> Yes Thomas the vmlinux is in /boot of 3rd partition as the other
partitions
> are swap and f0.
>
> At 11:48 AM 11/15/00 +0100, Thomas Marteau wrote:
>
> >----- Original Message -----
> >From: Kailashnath V Rampure <kailasr@webcash.com>
> >To: Paul Bame <bame@noam.fc.hp.com>
> >Cc: Grant Grundler <grundler@cup.hp.com>; Matt Taggart
> ><taggart@carmen.fc.hp.com>; <parisc-linux@thepuffingroup.com>
> >Sent: Tuesday, November 14, 2000 11:58 PM
> >Subject: Re: [parisc-linux] Boot command
> >
> >
> > > I have booted HP A class server through network. On that I have
> >repartioned
> > > the system and followed the steps on
> >http://www.parisc-linux.org/install.html.
> > > I have used the following command to initialize the hard disk. The
kernel
> >I
> > > have downloaded is vmlinux-20001018. and cpied it to /mnt/boot/vmlinux
> > > after mounting /dev/sda3. I have used the following command to
initialize
> > > the HDD.
> > >
> > > palo -I -k /boot/vmlinux -b /boot/iplboot \ -c '3/boot/vmlinux
TERM=linux
> > > HOME=/ root=/dev/sda3' \ /dev/sda
> >
> >This means that vmlinux must be in /boot in your third partition on your
> >disk.
> >Is it true in your case?
> >
> > > --------------------------------
> > > I get the following error:
> > > --------------------------------
> > > SOFT Boot.
> > > palo ipl bame@noam Tue oct 31 14:18:02 MST 2000
> > > 0/vmlinux 2138614 bytes@ 0x1f78c000
> > > 0/palo-cmdline '3/boot/vmlinux TERM=linux HOME=/ root=/dev/sda3'
> > > /dev/ida1 82 62 1030688
> > > /dev/ida2 f0 1030750 24738
> > > /dev/ida3 83 1055488 1030750
> > > Kernel:partition 3 file /boot/vmlinux
> > > ext2 block size 1024
> > > ext2_mount(partition 3) returns 0
> > > ext2_open(/boot/vmlinux) = -1
> > > open /boot/vmlinux failed

Re: [parisc-linux] Boot command

[Paul Bame]

=     You put the swap partition before the f0 partition and here it is the f0
= partition in first position.

The partition order doesn't matter so long as the f0 partition and
the partition containing your kernel (an ext2 partition) *end* within
the first 2Gb of the disk.  See the PALO README.html.

=     Also, your hard disk is ida instead of sda, what's that ?

PALO lists the devices as 'ida' instead of 'sda' or 'hda' since it
is using the firmware 'IODC' interface to talk to the boot device,
and it has no idea what type of boot device IODC is providing.

	-P

Re: [parisc-linux] Boot command

[Kailashnath V Rampure]

Thomas,
I mounted the /dev/sda3 on mnt and deleted every thing and recopied then 
rebooted. It worked. Probably there was some fault while I copied yesterday.
I did not repartition the disk now.
Thanks

Regards
Kailas
At 07:10 PM 11/15/00 +0100, Thomas Marteau wrote:
>Hi again,
>
>     You put the swap partition before the f0 partition and here it is the f0
>partition in first position.
>     Also, your hard disk is ida instead of sda, what's that ?
>
>Bye,
>
>ESIEE Team
>----- Original Message -----
>From: Kailashnath V Rampure <kailasr@webcash.com>
>To: Thomas Marteau <marteaut@esiee.fr>
>Cc: <parisc-linux@puffin.external.hp.com>
>Sent: Wednesday, November 15, 2000 6:55 PM
>Subject: Re: [parisc-linux] Boot command
>
>
> > Yes Thomas the vmlinux is in /boot of 3rd partition as the other
>partitions
> > are swap and f0.
> >
> > At 11:48 AM 11/15/00 +0100, Thomas Marteau wrote:
> >
> > >----- Original Message -----
> > >From: Kailashnath V Rampure <kailasr@webcash.com>
> > >To: Paul Bame <bame@noam.fc.hp.com>
> > >Cc: Grant Grundler <grundler@cup.hp.com>; Matt Taggart
> > ><taggart@carmen.fc.hp.com>; <parisc-linux@thepuffingroup.com>
> > >Sent: Tuesday, November 14, 2000 11:58 PM
> > >Subject: Re: [parisc-linux] Boot command
> > >
> > >
> > > > I have booted HP A class server through network. On that I have
> > >repartioned
> > > > the system and followed the steps on
> > >http://www.parisc-linux.org/install.html.
> > > > I have used the following command to initialize the hard disk. The
>kernel
> > >I
> > > > have downloaded is vmlinux-20001018. and cpied it to /mnt/boot/vmlinux
> > > > after mounting /dev/sda3. I have used the following command to
>initialize
> > > > the HDD.
> > > >
> > > > palo -I -k /boot/vmlinux -b /boot/iplboot \ -c '3/boot/vmlinux
>TERM=linux
> > > > HOME=/ root=/dev/sda3' \ /dev/sda
> > >
> > >This means that vmlinux must be in /boot in your third partition on your
> > >disk.
> > >Is it true in your case?
> > >
> > > > --------------------------------
> > > > I get the following error:
> > > > --------------------------------
> > > > SOFT Boot.
> > > > palo ipl bame@noam Tue oct 31 14:18:02 MST 2000
> > > > 0/vmlinux 2138614 bytes@ 0x1f78c000
> > > > 0/palo-cmdline '3/boot/vmlinux TERM=linux HOME=/ root=/dev/sda3'
> > > > /dev/ida1 82 62 1030688
> > > > /dev/ida2 f0 1030750 24738
> > > > /dev/ida3 83 1055488 1030750
> > > > Kernel:partition 3 file /boot/vmlinux
> > > > ext2 block size 1024
> > > > ext2_mount(partition 3) returns 0
> > > > ext2_open(/boot/vmlinux) = -1
> > > > open /boot/vmlinux failed

Re: [parisc-linux] glibc problem

[Kailashnath V Rampure]

I have redhat linux and the lin in my inetd.conf is as follows:

I missed few lines in the error. The complet error is as follows.
-------------------------
  Booting...
  Cannot find ENTRY_TEST.

  Fail to initialize.

  ENTRY_INT
  Status=-7

00000000 00000000 00000010 830339E0 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0000000B 00000000 000000FF 00000000  00000000  00000000  00000000  00000000
00000000 00000000 00400720 00000000 00000000 00000000 00000000 00000000

Failed to initialize
-------------------------------------------

The details of the server is as follows
The machine type is HP ACLASS (A180C)
The hardware path of the lan card is 8/0/20/0.




At 02:38 PM 10/27/00 -0700, Grant Grundler wrote:
>Kailashnath - can you also include machine type and
>HW path of the "lan" device?
>
>thanks,
>grant
>
>
>Kailashnath V Rampure wrote:
>...
> > But when I type bo lan at HP server Iget the following error
> > -------------------------
> > Booting...
> > Cannot find ENTRY_TEST.
> >
> > Fail to initialize.
> >
> > ENTRY_INT
> > Status=-7
>
>Config files look fine.
>What does your HP server report for "search lan"?
>(type that instead of "bo lan")
>
>grant
>
>Grant Grundler
>Unix Systems Enablement Lab
>+1.408.447.7253
>
>---------------------------------------------------------------------------
>To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with
>`unsubscribe' as the subject.

[parisc-linux] glibc problem

[Kailashnath V Rampure]

Hi

I have upgraded to GNU Make version 3.79.1 but when i run make its is 
giving following error:

Regards
Kailas

hppa-linux-gcc -nostdlib -nostartfiles -r -o /opt/hp/build/glibc/csu/crt1.o 
/opt/hp/build/glibc/csu/start.o /opt/hp/build/glibc/csu/abi-note.o 
/opt/hp/build/glibc/csu/init.o
hppa-linux-gcc -nostdlib -nostartfiles -r -o 
/opt/hp/build/glibc/csu/gcrt1.o /opt/hp/build/glibc/csu/crt1.o 
/opt/hp/build/glibc/csu/gmon-start.o
cp /dev/null /opt/hp/build/glibc/csu/Mcrt1.c
hppa-linux-gcc -O -Wall -Winline -Wstrict-prototypes -Wwrite-strings 
-g      -I../include -I. -I/opt/hp/build/glibc/csu -I.. 
-I../libio  -I/opt/hp/build/glibc -I../sysdeps/hppa/elf 
-I../sysdeps/unix/sysv/linux/hppa -I../sysdeps/unix/sysv/linux 
-I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman 
-I../sysdeps/unix/inet -I../sysdeps/unix/sysv -I../sysdeps/unix 
-I../sysdeps/posix -I../sysdeps/hppa/hppa1.1 -I../sysdeps/wordsize-32 
-I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754/dbl-64 
-I../sysdeps/ieee754/ldbl-128 -I../sysdeps/hppa/fpu -I../sysdeps/hppa 
-I../sysdeps/ieee754 -I../sysdeps/generic/elf 
-I../sysdeps/generic  -nostdinc -isystem 
/opt/hpboot/lib/gcc-lib/hppa-linux/2.96/include -isystem 
/opt/hp/linux/include  -include 
../include/libc-symbols.h     -DHAVE_INITFINI  -c 
/opt/hp/build/glibc/csu/Mcrt1.c -o /opt/hp/build/glibc/csu/Mcrt1.o
make[2]: *** [/opt/hp/build/glibc/csu/Mcrt1.o] Error 1
make[2]: Leaving directory `/opt/hp/glibc/csu'
make[1]: *** [csu/subdir_lib] Error 2
make[1]: Leaving directory `/opt/hp/glibc'
make: *** [all] Error 2

Re: [parisc-linux] glibc problem

[Alan Modra]

On Wed, 25 Oct 2000, Kailashnath V Rampure wrote:

> Hi
> 
> I have upgraded to GNU Make version 3.79.1 but when i run make its is 
> giving following error:
> 
> Regards
> Kailas
> 
> hppa-linux-gcc -nostdlib -nostartfiles -r -o /opt/hp/build/glibc/csu/crt1.o 
> /opt/hp/build/glibc/csu/start.o /opt/hp/build/glibc/csu/abi-note.o 
> /opt/hp/build/glibc/csu/init.o
> hppa-linux-gcc -nostdlib -nostartfiles -r -o 
> /opt/hp/build/glibc/csu/gcrt1.o /opt/hp/build/glibc/csu/crt1.o 
> /opt/hp/build/glibc/csu/gmon-start.o
> cp /dev/null /opt/hp/build/glibc/csu/Mcrt1.c

Hmm, my make.log shows a difference here.  I have echo > ...Mcrt1.c, which
creates a 1 byte dummy file rather than the zero byte file you get from cp
/dev/null.  Bombing on an empty input file is a known gcc bug for the
snapshot we took of the Cygnus development gcc sources.

I suggest you update your glibc sources.

-- 
Linuxcare.  Support for the Revolution.

Re: [parisc-linux] glibc problem

[Kailashnath V Rampure]

[-- Attachment #1: Type: text/plain, Size: 4772 bytes --]

HI alan,

I did upgrade to latest glibc from the cvs and tried I still get the same 
error. Actually I restarted from scratch starting from binutils. I have 
seen some warning while I built gcc. The smallpart of gcc warnings are as 
follows:

Gcc warnings:

prototypes -pedantic -Wno-long-long  -DHAVE_CONFIG_H    -I. 
-I/opt/hp/gcc/gcc -I/opt/hp/gcc/gcc/config -I/opt/hp/gcc/gcc/../include 
/opt/hp/gcc/gcc/explow.c
/usr/include/bits/string2.h: In function `__stpcpy_small':
In file included from /usr/include/string.h:346,
                  from /opt/hp/gcc/gcc/system.h:176,
                  from /opt/hp/gcc/gcc/explow.c:24:
/usr/include/bits/string2.h:611: warning: pointer targets in return differ 
in signedness
gcc -c -DCROSS_COMPILE -DIN_GCC    -g -O2 -W -Wall -Wtraditional 
-Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic 
-Wno-long-long  -DHAVE_CONFIG_H    -I. -I/opt/hp/gcc/gcc 
-I/opt/hp/gcc/gcc/config -I/opt/hp/gcc/gcc/../include /opt/hp/gcc/gcc/optabs.c
/usr/include/bits/string2.h: In function `__stpcpy_small':
In file included from /usr/include/string.h:346,
                  from /opt/hp/gcc/gcc/system.h:176,
                  from /opt/hp/gcc/gcc/optabs.c:24:
/usr/include/bits/string2.h:611: warning: pointer targets in return differ 
in signedness
gcc -c -DCROSS_COMPILE -DIN_GCC    -g -O2 -W -Wall -Wtraditional 
-Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic 
-Wno-long-long  -DHAVE_CONFIG_H    -I. -I/opt/hp/gcc/gcc 
-I/opt/hp/gcc/gcc/config -I/opt/hp/gcc/gcc/../include /opt/hp/gcc/gcc/real.c
/usr/include/bits/string2.h: In function `__stpcpy_small':
In file included from /usr/include/string.h:346,
                  from /opt/hp/gcc/gcc/system.h:176,
                  from /opt/hp/gcc/gcc/real.c:25:
/usr/include/bits/string2.h:611: warning: pointer targets in return differ 
in signedness
gcc -c -DCROSS_COMPILE -DIN_GCC    -g -O2 -W -Wall -Wtraditional 
-Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic 
-Wno-long-long  -DHAVE_CONFIG_H    -I. -I/opt/hp/gcc/gcc 
-I/opt/hp/gcc/gcc/config -I/opt/hp/gcc/gcc/../include 
/opt/hp/gcc/gcc/builtins.c
/usr/include/bits/string2.h: In function `__stpcpy_small':
In file included from /usr/include/string.h:346,
                  from /opt/hp/gcc/gcc/system.h:176,
                  from /opt/hp/gcc/gcc/builtins.c:23:
/usr/include/bits/string2.h:611: warning: pointer targets in return differ 
in signedness
gcc -DCROSS_COMPILE -DIN_GCC    -g -O2 -W -Wall -Wtraditional 
-Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic 
-Wno-long-long  -DHAVE_CONFIG_H    -I. -I/opt/hp/gcc/gcc 
-I/opt/hp/gcc/gcc/config -I/opt/hp/gcc/gcc/../include \
   -DLOCALEDIR=\"/opt/hpboot/share/locale\" \
   -c `echo /opt/hp/gcc/gcc/intl.c | sed 's,^\./,,'`
gcc -c -DCROSS_COMPILE -DIN_GCC    -g -O2 -W -Wall -Wtraditional 
-Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic 
-Wno-long-long  -DHAVE_CONFIG_H    -I. -I/opt/hp/gcc/gcc 
-I/opt/hp/gcc/gcc/config -I/opt/hp/gcc/gcc/../include /opt/hp/gcc/gcc/varasm.c
/usr/include/bits/string2.h: In function `__stpcpy_small':
In file included from /usr/include/string.h:346,
                  from /opt/hp/gcc/gcc/system.h:176,
                  from /opt/hp/gcc/gcc/varasm.c:31:
/usr/include/bits/string2.h:611: warning: pointer targets in return differ 
in signedness
gcc -c -DCROSS_COMPILE -DIN_GCC    -g -O2 -W -Wall -Wtraditional 
-Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic 
-Wno-long-long  -DHAVE_CONFIG_H    -I. -I/opt/hp/gcc/gcc -I/opt/hp/gcc/gcc/c


At 02:27 PM 10/26/00 +1100, Alan Modra wrote:
>On Wed, 25 Oct 2000, Kailashnath V Rampure wrote:
>
> > Hi
> >
> > I have upgraded to GNU Make version 3.79.1 but when i run make its is
> > giving following error:
> >
> > Regards
> > Kailas
> >
> > hppa-linux-gcc -nostdlib -nostartfiles -r -o 
> /opt/hp/build/glibc/csu/crt1.o
> > /opt/hp/build/glibc/csu/start.o /opt/hp/build/glibc/csu/abi-note.o
> > /opt/hp/build/glibc/csu/init.o
> > hppa-linux-gcc -nostdlib -nostartfiles -r -o
> > /opt/hp/build/glibc/csu/gcrt1.o /opt/hp/build/glibc/csu/crt1.o
> > /opt/hp/build/glibc/csu/gmon-start.o
> > cp /dev/null /opt/hp/build/glibc/csu/Mcrt1.c
>
>Hmm, my make.log shows a difference here.  I have echo > ...Mcrt1.c, which
>creates a 1 byte dummy file rather than the zero byte file you get from cp
>/dev/null.  Bombing on an empty input file is a known gcc bug for the
>snapshot we took of the Cygnus development gcc sources.
>
>I suggest you update your glibc sources.
>
>--
>Linuxcare.  Support for the Revolution.
>
>---------------------------------------------------------------------------
>To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with
>`unsubscribe' as the subject.

[-- Attachment #2: Type: text/html, Size: 6177 bytes --]

Re: [parisc-linux] glibc problem

[John David Anglin]

> I did upgrade to latest glibc from the cvs and tried I still get the same 
> error. Actually I restarted from scratch starting from binutils. I have 
> seen some warning while I built gcc. The smallpart of gcc warnings are as 
> follows:
> 
> Gcc warnings:
> 
> prototypes -pedantic -Wno-long-long  -DHAVE_CONFIG_H    -I. 
> -I/opt/hp/gcc/gcc -I/opt/hp/gcc/gcc/config -I/opt/hp/gcc/gcc/../include 
> /opt/hp/gcc/gcc/explow.c
> /usr/include/bits/string2.h: In function `__stpcpy_small':
> In file included from /usr/include/string.h:346,
>                   from /opt/hp/gcc/gcc/system.h:176,
>                   from /opt/hp/gcc/gcc/explow.c:24:
> /usr/include/bits/string2.h:611: warning: pointer targets in return differ 
> in signedness

I think the enclosed patch to bits/string2.h may fix your gcc warnings.
Doubt this is your real problem.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-09-22  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* string.h (__stpcpy_small): Correct return type.
	(strnlen): Correct return type in conditional expression.

--- string2.h.orig	Tue Sep  5 08:22:56 2000
+++ string2.h	Fri Sep 22 15:22:27 2000
@@ -608,7 +608,7 @@
       __u = __extension__ ((void *) __u + 3);
       break;
     }
-  return &__u->__uc;
+  return (char *) __u;
 }
 #  else
 #  define __stpcpy_args(src) \
@@ -1025,7 +1025,7 @@
 strnlen (__const char *__string, size_t __maxlen)
 {
   __const char *__end = (__const char *) memchr (__string, '\0', __maxlen);
-  return __end ? __end - __string : __maxlen;
+  return __end ? (size_t) (__end - __string) : __maxlen;
 }
 # endif
 #endif

Re: [parisc-linux] glibc problem

[Matt Taggart]

> I did upgrade to latest glibc from the cvs and tried I still get the same 
> error. Actually I restarted from scratch starting from binutils. I have 
> seen some warning while I built gcc. The smallpart of gcc warnings are as 
> follows:
[snip]
> /usr/include/bits/string2.h: In function `__stpcpy_small':
> In file included from /usr/include/string.h:346,
>                   from /opt/hp/gcc/gcc/system.h:176,
>                   from /opt/hp/gcc/gcc/explow.c:24:
> /usr/include/bits/string2.h:611: warning: pointer targets in return differ 

I don't think you want to be using the system includes. Perhaps you need to be 
using the --with-headers= option and point it at your include directory. You 
can get an include tarball from,

ftp://puffin.external.hp.com/pub/parisc/src/include-latest.tar.gz

Unless you really want to hack the toolchain I would recommend the prebuilt 
cross-compiler available at,

ftp://puffin.external.hp.com/pub/parisc/binaries/LinuxX86/xc-latest.tar.gz

If you *do* want to hack the toolchain the build-tools cvs module has several 
scripts that can help you with building.

-- 
Matt Taggart
taggart@fc.hp.com

Re: [parisc-linux] glibc problem

[Alan Modra]

On Thu, 26 Oct 2000, Kailashnath V Rampure wrote:

> I did upgrade to latest glibc from the cvs and tried I still get the same 
> error.

Did you upgrade from the CVS repository on puffin.external.hp.com?  Please
check glibc/csu/Makefile.  Starting at line 160, you should see

$(addprefix $(objpfx),$(filter-out $(start-installed-name),$(csu-dummies))):
	@-rm -f $(@:.o=.c)
	echo > $(@:.o=.c)
	$(COMPILE.c) $(@:.o=.c) $(OUTPUT_OPTION)
	rm -f $(@:.o=.c)

-- 
Linuxcare.  Support for the Revolution.

Re: [parisc-linux] glibc problem

[Kailashnath V Rampure]

Yes the line is there.

At 10:03 AM 10/27/00 +1100, Alan Modra wrote:
>On Thu, 26 Oct 2000, Kailashnath V Rampure wrote:
>
> > I did upgrade to latest glibc from the cvs and tried I still get the same
> > error.
>
>Did you upgrade from the CVS repository on puffin.external.hp.com?  Please
>check glibc/csu/Makefile.  Starting at line 160, you should see
>
>$(addprefix $(objpfx),$(filter-out $(start-installed-name),$(csu-dummies))):
>         @-rm -f $(@:.o=.c)
>         echo > $(@:.o=.c)
>         $(COMPILE.c) $(@:.o=.c) $(OUTPUT_OPTION)
>         rm -f $(@:.o=.c)
>
>--
>Linuxcare.  Support for the Revolution.
>
>---------------------------------------------------------------------------
>To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with
>`unsubscribe' as the subject.

Re: [parisc-linux] glibc problem

[Alan Modra]

On Thu, 26 Oct 2000, Kailashnath V Rampure wrote:

> Yes the line is there.

OK, that should mean you no longer get zero length .c files created with
"cp /dev/null file"  Is that the case?  If you still see zero length files
in glibc/csu, then maybe that's because "make clean" didn't remove
them.  Just delete them.

-- 
Linuxcare.  Support for the Revolution.

Re: [parisc-linux] glibc problem

[Kailashnath V Rampure]

[-- Attachment #1: Type: text/plain, Size: 2259 bytes --]

Hi Matt,

I could run as you told but had problems so i did what helge had (you need 
to go to /palo/ipl and do "hppa-linux-ranlib ipl.a". Then go back to /linux 
and do a "make palo" again.) then lif image was created.

But when I type bo lan at HP server Iget the following error
-------------------------
Booting...
Cannot find ENTRY_TEST.

Fail to initialize.

ENTRY_INT
Status=-7
----------------------------------
My config files are as follows:

I have /etc/bootptab file as follows:
-------------------------
linux:\
         hn:\
         sm=255.255.248.0:\
         vm=rfc1048:\
         ht=ether:\
         hd=/tftpboot:\
         bf=vmlinux:\
         ha=0010830339e0:\
         ip=192.168.1.237
--------------------------------

and my exports file reads as :
--------------------------------------------------
/tftpboot/linux linux(rw,no_root_squash)
-------------------------------------------------------

I had changed the NFSROOT line in Makefile in palo  to
NFSROOT = 192.168.1.236:/tftpboot/linux



At 06:47 PM 10/26/00 -0600, Matt Taggart wrote:

>Kailashnath V Rampure writes...
>
> > Thanks Matt,
> >
> > I have downloaded prebuilt cross-compiler but can you direct me to any
> > documentation how to use this cross compiler. I want to do a NFS boot. I
>
>Untar it in /, it will live in /opt/palinux.
>Add /opt/palinux/bin to your path
>Edit palo/Makefile and set it up for nfsroot, mine has the following line,
>
>NFSROOT = 15.1.51.72:/tftpboot/geordi
>
>That's the location of my nfsroot. Make sure you export it. My /etc/exports
>contains,
>
>/tftpboot/geordi                15.1.51.73(rw,no_root_squash)
>
>Then in the linux directory do,
>
>make oldconfig (maybe answer questions)
>make dep;make clean
>make palo
>
>Setup your bootp server to point to the lifimage generated. My /etc/bootptab
>contains,
>
>geordi:\
>         hn:\
>         sm=255.255.248.0:\
>         vm=rfc1048:\
>         ht=ether:\
>         hd=/tftpboot:\
>         bf=lif-geordi:\
>         ha=0800097891EB:\
>         ip=15.1.51.73
>
>and /tftpboot/lif-geordi is a symlink to palo/lifimage
>
>Hopefully that's enough information to get you going. If you have problems
>please let me know how far you get.
>
>Thanks,
>
>--
>Matt Taggart
>taggart@fc.hp.com

[-- Attachment #2: Type: text/html, Size: 3319 bytes --]

Re: [parisc-linux] glibc problem

[Grant Grundler]

Kailashnath V Rampure wrote:
...
> But when I type bo lan at HP server Iget the following error
> -------------------------
> Booting...
> Cannot find ENTRY_TEST.
> 
> Fail to initialize.
> 
> ENTRY_INT
> Status=-7

Config files look fine.
What does your HP server report for "search lan"?
(type that instead of "bo lan")

grant

Grant Grundler
Unix Systems Enablement Lab
+1.408.447.7253

Re: [parisc-linux] glibc problem

[Kailashnath V Rampure]

The path number is P0, device path is 8/0/20/0.0 and device type is LAN MODULE.

I also see on the Linux server that bootpd is being invoked for some time only.

At 02:27 PM 10/27/00 -0700, Grant Grundler wrote:
>Kailashnath V Rampure wrote:
>...
> > But when I type bo lan at HP server Iget the following error
> > -------------------------
> > Booting...
> > Cannot find ENTRY_TEST.
> >
> > Fail to initialize.
> >
> > ENTRY_INT
> > Status=-7
>
>Config files look fine.
>What does your HP server report for "search lan"?
>(type that instead of "bo lan")
>
>grant
>
>Grant Grundler
>Unix Systems Enablement Lab
>+1.408.447.7253

Re: [parisc-linux] glibc problem

[Matt Taggart]

Kailashnath V Rampure writes...

> I also see on the Linux server that bootpd is being invoked for some time
> only.

bootpd runs from inetd and only stays up if it's receiving requests. After a 
specified amount of time of no requests it will exit. This isn't a problem as 
inetd will fire up a new one if needed.

I would make sure that tftpd is doing the right thing. You can test your tftpd 
setup by trying to download the lifimage yourself using the tftp client 
program.

bootpd and tftpd are pretty good about writing to syslog too, so check there 
for errors.

HTH,

-- 
Matt Taggart
taggart@fc.hp.com

Re: [parisc-linux] glibc problem

[Kailashnath V Rampure]

Thanks !!!!! a lot specially to MATT and Helge Deller
I was able to Bring up the linux on A class server.

Now I have formatted the hdd and mounted disk to /mnt and then transfered 
the root to /dev/hda2.
I want to know how  do I transfer palo to this new hdd.

Regards
Kailas

At 03:51 PM 10/27/00 -0600, Matt Taggart wrote:

>Kailashnath V Rampure writes...
>
> > I also see on the Linux server that bootpd is being invoked for some time
> > only.
>
>bootpd runs from inetd and only stays up if it's receiving requests. After a
>specified amount of time of no requests it will exit. This isn't a problem as
>inetd will fire up a new one if needed.
>
>I would make sure that tftpd is doing the right thing. You can test your 
>tftpd
>setup by trying to download the lifimage yourself using the tftp client
>program.
>
>bootpd and tftpd are pretty good about writing to syslog too, so check there
>for errors.
>
>HTH,
>
>--
>Matt Taggart
>taggart@fc.hp.com
>
>
>---------------------------------------------------------------------------
>To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with
>`unsubscribe' as the subject.

Re: [parisc-linux] glibc problem

[Paul Bame]

= linux:\
=          hn:\
=          sm=255.255.248.0:\
=          vm=rfc1048:\
=          ht=ether:\
=          hd=/tftpboot:\
=          bf=vmlinux:\
=          ha=0010830339e0:\
=          ip=192.168.1.237

bf should probably be lifimage, not vmlinux, though that's not the
current problem.

	-P

Re: [parisc-linux] glibc problem

[Matt Taggart]

Kailashnath V Rampure writes...

> But when I type bo lan at HP server Iget the following error

Do you have tftp installed and working? It usually runs via inetd. Here's what 
I have in /etc/inetd.conf on my Debian box,

tftp  dgram  udp  wait  nobody  /usr/sbin/tcpd  /usr/sbin/in.tftpd /boot 
/tftpboot

-- 
Matt Taggart
taggart@fc.hp.com

Re: [parisc-linux] glibc problem

[Kailashnath V Rampure]

The inetd.conf is as follows

tftp    dgram   udp     wait    root    /usr/sbin/tcpd  in.tftpd /tftpboot
bootps  dgram   udp     wait    root    /usr/sbin/tcpd  bootpd


At 03:41 PM 10/27/00 -0600, Matt Taggart wrote:

>Kailashnath V Rampure writes...
>
> > But when I type bo lan at HP server Iget the following error
>
>Do you have tftp installed and working? It usually runs via inetd. Here's 
>what
>I have in /etc/inetd.conf on my Debian box,
>
>tftp  dgram  udp  wait  nobody  /usr/sbin/tcpd  /usr/sbin/in.tftpd /boot
>/tftpboot
>
>--
>Matt Taggart
>taggart@fc.hp.com

[parisc-linux] New cross-compiler

[Paul Bame]

I just put a new cross compiler tarball at
ftp://puffin.external.hp.com/pub/parisc/binaries/LinuxX86/xc-20000728.tgz
As usual, it's built for the Debian 'potato' release, and will probably
work on most fairly recent Linux boxes.

This is the full userspace-capable cross compiler, which is also
required to build palo these days (palo needs the x-compiler to have
a full set of header files).  It built sash, the kernel, and palo.

It does not include any of the shared library stuff currently under
development.

	-Paul Bame