Re: [ACPI] acpi problem with nforce motherboards and ethernet

[Josh McKinney <forming@charter.net>]

On approximately Sat, Feb 07, 2004 at 03:50:18AM +0100, Andi Kleen wrote:
> On Sat, 7 Feb 2004 00:33:04 +0100 (CET)
> "Maciej W. Rozycki" <macro@ds2.pg.gda.pl> wrote:
> 
> 
> >  That's not the right fix.  There's a bug in Linux's ACPI IRQ setup as
> > I've discovered by comparing the code to the spec.  Here's a patch I sent
> > in December both to the LKML and the ACPI maintainer.  The feedback from
> > the list was positive, but the maintainer didn't bother to comment.
> 
> Thanks. I added the patch to the x86-64 sources and it indeed seems to fix
> the Nforce3.
> 

I tried the patch against 2.6.3-rc1 and it doesn't seem to fix
anything, timer is still on XT-PIC.  This is on a A7N8X Deluxe rev2,
nforce2.

           CPU0       
  0:     524366          XT-PIC  timer
  1:       1727    IO-APIC-edge  i8042
  2:          0          XT-PIC  cascade
  8:          1    IO-APIC-edge  rtc
  9:          0   IO-APIC-level  acpi
 14:        913    IO-APIC-edge  ide0
 15:      22792    IO-APIC-edge  ide1
 19:      23559   IO-APIC-level  nvidia
 20:      52452   IO-APIC-level  ohci_hcd, eth0
 21:          0   IO-APIC-level  ehci_hcd, NVidia nForce2
 22:        354   IO-APIC-level  ohci_hcd
NMI:          0 
LOC:     524223 
ERR:          0
MIS:          0


-- 
Josh McKinney		     |	Webmaster: http://joshandangie.org
--------------------------------------------------------------------------
                             | They that can give up essential liberty
Linux, the choice       -o)  | to obtain a little temporary safety deserve 
of the GNU generation    /\  | neither liberty or safety. 
                        _\_v |                          -Benjamin Franklin