All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Luis Miguel García" <ktech-39ZsbGIQGT7e5aOfsHch1g@public.gmane.org>
To: a.verweij-oe7qfRrRQfeEZXFvZSAUrfP6llvjuJOh@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	akpm-LL/9OlyS9hIAvxtiuMwx3w@public.gmane.org
Subject: acpi problem with nforce motherboards and ethernet
Date: Thu, 05 Feb 2004 18:41:12 +0100	[thread overview]
Message-ID: <40228038.1070003@wanadoo.es> (raw)

Hi:

Since Andrew Morton picked up latest acpi bk updates, nforce motherboards have problems, mainly with ethernet adapters. Reporters say that with acpi=off, the problm gets fixed, so we think the problem could be acpi. Some more useful info:



On Tue, 3 Feb 2004, [ISO-8859-1] Luis Miguel García wrote:


>> When I try to boot with latest mm series (such as actual rc3-mm1 or
>> rc2-mm2), my nforce ethernet device doesn't works. It worked in the past
>> with the forcedeth reverse engineered driver but now it keeps for 30 or
>> more seconds halted (at boot) and then the network device dosn't run.
>>
>> Here is the dmesg of rc3-mm1. Do you want for me to test something? Thanks!
>>
>> P.S.:   The ACPI related messages are larger that in rc3.
>  
>

My e100 on an nforce2 won't work in rc3-mm1.
The "acpi=off" boot parameter makes it go.


And for the record, I can boot with that kernel and save one dmesg for you if you want. Only send me a request and I'll send it to you.

P.S.: Sent any messages you want directly to me as i'm not subscribed to acpi-devel.

Thanks,

Luis Miguel García





>Which part of nforce support are you talking about luis?

>On Thu, 5 Feb 2004, Andrew Morton wrote:


>> Luis Miguel Garc?a <ktech-39ZsbGIQGT7e5aOfsHch1g@public.gmane.org> wrote:
>  
>
>>> >
>>> > Andrew Morton wrote:
>>> >
>>    
>>
>>>> > >
>>>      
>>>
>>>>> > >> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.2/2.6.2-mm1/
>>>>> > >>
>>>>> > >>
>>>>> > >>
>>>>> > >> - Merged some page reclaim fixes from Nick and Nikita.  These yield some
>>>>> > >>  performance improvements in low memory and heavy paging situations.
>>>>> > >>
>>>>> > >>
>>>>        
>>>>
>>> >
>>> > Andrew, do you know if this acpi pull down has nforce support fixed?
>>    
>>
>>
>> It doesn't appear that way.
>>
>  
>
>>> > Or perhaps it's even unnotified to the acpi team?
>>    
>>
>>
>> I do not know.  Sending them a bugzilla ID would help, if such a thing exists.
>>
>>
>>
>> -------------------------------------------------------
>> The SF.Net email is sponsored by EclipseCon 2004
>> Premiere Conference on Open Tools Development and Integration
>> See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
>> http://www.eclipsecon.org/osdn
>> _______________________________________________
>> Acpi-devel mailing list
>> Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
>> https://lists.sourceforge.net/lists/listinfo/acpi-devel
>>
>>
>  
>


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

WARNING: multiple messages have this Message-ID (diff)
From: "Luis Miguel García" <ktech@wanadoo.es>
To: a.verweij@student.tudelft.nl, linux-kernel@vger.kernel.org,
	acpi-devel@lists.sourceforge.net, akpm@digeo.com
Subject: acpi problem with nforce motherboards and ethernet
Date: Thu, 05 Feb 2004 18:41:12 +0100	[thread overview]
Message-ID: <40228038.1070003@wanadoo.es> (raw)

Hi:

Since Andrew Morton picked up latest acpi bk updates, nforce motherboards have problems, mainly with ethernet adapters. Reporters say that with acpi=off, the problm gets fixed, so we think the problem could be acpi. Some more useful info:



On Tue, 3 Feb 2004, [ISO-8859-1] Luis Miguel García wrote:


>> When I try to boot with latest mm series (such as actual rc3-mm1 or
>> rc2-mm2), my nforce ethernet device doesn't works. It worked in the past
>> with the forcedeth reverse engineered driver but now it keeps for 30 or
>> more seconds halted (at boot) and then the network device dosn't run.
>>
>> Here is the dmesg of rc3-mm1. Do you want for me to test something? Thanks!
>>
>> P.S.:   The ACPI related messages are larger that in rc3.
>  
>

My e100 on an nforce2 won't work in rc3-mm1.
The "acpi=off" boot parameter makes it go.


And for the record, I can boot with that kernel and save one dmesg for you if you want. Only send me a request and I'll send it to you.

P.S.: Sent any messages you want directly to me as i'm not subscribed to acpi-devel.

Thanks,

Luis Miguel García





>Which part of nforce support are you talking about luis?

>On Thu, 5 Feb 2004, Andrew Morton wrote:


>> Luis Miguel Garc?a <ktech@wanadoo.es> wrote:
>  
>
>>> >
>>> > Andrew Morton wrote:
>>> >
>>    
>>
>>>> > >
>>>      
>>>
>>>>> > >> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.2/2.6.2-mm1/
>>>>> > >>
>>>>> > >>
>>>>> > >>
>>>>> > >> - Merged some page reclaim fixes from Nick and Nikita.  These yield some
>>>>> > >>  performance improvements in low memory and heavy paging situations.
>>>>> > >>
>>>>> > >>
>>>>        
>>>>
>>> >
>>> > Andrew, do you know if this acpi pull down has nforce support fixed?
>>    
>>
>>
>> It doesn't appear that way.
>>
>  
>
>>> > Or perhaps it's even unnotified to the acpi team?
>>    
>>
>>
>> I do not know.  Sending them a bugzilla ID would help, if such a thing exists.
>>
>>
>>
>> -------------------------------------------------------
>> The SF.Net email is sponsored by EclipseCon 2004
>> Premiere Conference on Open Tools Development and Integration
>> See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
>> http://www.eclipsecon.org/osdn
>> _______________________________________________
>> Acpi-devel mailing list
>> Acpi-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/acpi-devel
>>
>>
>  
>

             reply	other threads:[~2004-02-05 17:41 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-02-05 17:41 Luis Miguel García [this message]
2004-02-05 17:41 ` acpi problem with nforce motherboards and ethernet Luis Miguel García
2004-02-05 18:41 ` [ACPI] " Arjen Verweij
2004-02-05 18:41   ` Arjen Verweij
  -- strict thread matches above, loose matches on Subject: below --
2004-02-05 19:25 Luis Miguel García
     [not found] ` <402298C7.5050405-39ZsbGIQGT7e5aOfsHch1g@public.gmane.org>
2004-02-05 19:44   ` David Ford
     [not found]     ` <40229D2C.20701-qokYbnrgTHEgsBAKwltoeQ@public.gmane.org>
2004-02-05 21:27       ` Luis Miguel García
     [not found]         ` <4022B55B.1090309-39ZsbGIQGT7e5aOfsHch1g@public.gmane.org>
2004-02-05 23:40           ` Andrew Morton
     [not found]             ` <20040205154059.6649dd74.akpm-3NddpPZAyC0@public.gmane.org>
2004-02-06  0:08               ` Prakash K. Cheemplavam
2004-02-06  0:14               ` Craig Bradney
     [not found]                 ` <1076026496.16107.23.camel-V9bJ71E8C7qMuHbpHUh99CT4j+jCus6s@public.gmane.org>
2004-02-06  0:22                   ` Luis Miguel García
     [not found]                     ` <4022DE3C.1080905-39ZsbGIQGT7e5aOfsHch1g@public.gmane.org>
2004-02-06  0:38                       ` Prakash K. Cheemplavam
2004-02-06  0:46                         ` [ACPI] " Luis Miguel García
     [not found]                           ` <4022E3C8.4020704-39ZsbGIQGT7e5aOfsHch1g@public.gmane.org>
2004-02-06  0:59                             ` Craig Bradney
2004-02-06  0:56                       ` Craig Bradney
2004-02-06 23:33               ` Maciej W. Rozycki
     [not found]                 ` <Pine.LNX.4.55.0402070021210.12260-rsPqkUlH4Vdx0R2ya2r/wqsMm+1xrEX8@public.gmane.org>
2004-02-07  6:29                   ` Luis Miguel García
2004-02-06  9:47           ` Daniel Drake

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=40228038.1070003@wanadoo.es \
    --to=ktech-39zsbgiqgt7e5aofshch1g@public.gmane.org \
    --cc=a.verweij-oe7qfRrRQfeEZXFvZSAUrfP6llvjuJOh@public.gmane.org \
    --cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    --cc=akpm-LL/9OlyS9hIAvxtiuMwx3w@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.