From: Martin Waitz <tali@admingilde.org>
To: Kendall Bennett <KendallB@scitechsoft.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Generic VESA framebuffer driver and Video card BOOT?
Date: Mon, 18 Oct 2004 13:44:43 +0200 [thread overview]
Message-ID: <20041018114443.GC3618@admingilde.org> (raw)
In-Reply-To: <416FB29A.11731.1C46848@localhost>
[-- Attachment #1: Type: text/plain, Size: 830 bytes --]
hi :)
On Fri, Oct 15, 2004 at 11:20:58AM -0700, Kendall Bennett wrote:
> Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> > It doesn't imply this at all. You set an initial mode with the BIOS
> > during boot up. When your initrd runs you gain the ability to flip mode
> > and do cool stuff - arguably it doesn't even need to be in initrd.
>
> That works great on x86, but this solution was developed for PowerPC and
> MIPS embedded systems development not x86 desktop systems. For those
> platforms you either need a boot loader that can bring up the system into
> graphics mode
not neccessarily.
If anything goes wrong before console is initialized, then that could
be displayed by the firmware.
Is there any arch which doesn't have some basic text-output
functunality in its firmware?
--
Martin Waitz
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2004-10-18 11:44 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <2Pkf0-42m-11@gated-at.bofh.it>
[not found] ` <2PncW-6j9-19@gated-at.bofh.it>
[not found] ` <2PncW-6j9-21@gated-at.bofh.it>
[not found] ` <20030401205016$5cc4@gated-at.bofh.it>
[not found] ` <20030401205016$63f7@gated-at.bofh.it>
[not found] ` <20030424075011$4028@gated-at.bofh.it>
[not found] ` <1ewKr-2Kh-41@gated-at.bofh.it>
[not found] ` <CebL.O9.13@gated-at.bofh.it>
[not found] ` <1bucs-57R-33@gated-at.bofh.it>
[not found] ` <2PncW-6j9-23@gated-at.bofh.it>
[not found] ` <20030423094012$4166@gated-at.bofh.it>
[not found] ` <2PncW-6j9-17@gated-at.bofh.it>
[not found] ` <2PAMY-7Ir-21@gated-at.bofh.it>
2004-10-15 14:22 ` Generic VESA framebuffer driver and Video card BOOT? Andi Kleen
2004-10-15 14:33 ` Alan Cox
2004-10-15 18:20 ` Kendall Bennett
2004-10-15 18:39 ` Alan Cox
2004-10-15 22:27 ` Kendall Bennett
2004-10-15 23:34 ` Alan Cox
2004-10-16 1:07 ` William Lee Irwin III
2004-10-21 11:59 ` Pavel Machek
2004-10-18 11:44 ` Martin Waitz [this message]
2004-10-18 19:43 ` Kendall Bennett
2004-10-19 17:01 ` Martin Waitz
2004-10-19 17:54 ` Kendall Bennett
2004-10-15 15:37 ` Gerd Knorr
2004-10-16 0:55 ` Andi Kleen
2004-10-16 12:21 ` Gerd Knorr
2004-10-21 4:03 Yu, Luming
2004-10-21 4:03 ` Yu, Luming
-- strict thread matches above, loose matches on Subject: below --
2004-10-16 1:50 [Linux-fbdev-devel] " Antonino A. Daplas
2004-10-16 2:03 ` Jon Smirl
2004-10-18 19:34 ` Kendall Bennett
2004-10-18 20:34 ` Richard Smith
2004-10-18 21:16 ` [Linux-fbdev-devel] " Jon Smirl
2004-10-18 22:34 ` Richard Smith
2004-10-18 23:28 ` [Linux-fbdev-devel] " Jon Smirl
2004-10-19 0:18 ` Richard Smith
2004-10-19 0:55 ` [Linux-fbdev-devel] " Kendall Bennett
2004-10-19 1:39 ` Richard Smith
2004-10-19 17:54 ` Kendall Bennett
2004-10-19 21:48 ` [Linux-fbdev-devel] " Pavel Machek
2004-10-20 17:01 ` Kendall Bennett
2004-10-20 19:08 ` [Linux-fbdev-devel] " Pavel Machek
2004-10-21 19:36 ` Kendall Bennett
[not found] <2PjiW-3hl-21@gated-at.bofh.it>
2004-10-14 20:03 ` Andi Kleen
2004-10-14 20:46 ` Kendall Bennett
2004-10-15 12:39 ` Alan Cox
2004-10-15 18:20 ` Kendall Bennett
2004-10-15 18:41 ` Alan Cox
2004-10-15 20:19 ` Jon Smirl
2004-10-15 22:22 ` Kendall Bennett
2004-10-15 22:22 ` Kendall Bennett
2004-10-15 23:02 ` Jon Smirl
2004-10-19 21:09 ` Pavel Machek
2004-10-20 15:23 ` Paulo Marques
2004-10-20 17:27 ` Kendall Bennett
2004-10-14 19:02 Kendall Bennett
2004-10-14 19:59 ` Zachary Smith
2004-10-15 23:36 ` Ian Romanick
2004-10-14 20:48 ` Zachary Smith
2004-10-15 18:05 ` Kendall Bennett
2004-10-15 18:55 ` Zachary Smith
2004-10-15 19:18 ` Geert Uytterhoeven
2004-10-15 22:22 ` Kendall Bennett
2004-10-15 12:05 ` [Linux-fbdev-devel] " Gerd Knorr
2004-10-15 12:38 ` Geert Uytterhoeven
2004-10-15 13:13 ` Gerd Knorr
2004-10-17 12:07 ` Martin Waitz
2004-10-18 8:36 ` Gerd Knorr
2004-10-18 11:39 ` [Linux-fbdev-devel] " Martin Waitz
2004-10-18 12:10 ` Gerd Knorr
2004-10-15 18:29 ` [Linux-fbdev-devel] " Venkatesh Pallipadi
2004-10-16 9:01 ` Nigel Cunningham
2004-10-15 13:48 ` Helge Hafting
2004-10-15 13:48 ` Helge Hafting
2004-10-15 18:36 ` Kendall Bennett
2004-10-15 21:44 ` Helge Hafting
2004-10-15 22:12 ` Kendall Bennett
2004-10-16 17:44 ` Jon Smirl
2004-10-16 17:44 ` Jon Smirl
2004-10-19 21:00 ` Pavel Machek
2004-10-19 21:11 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041018114443.GC3618@admingilde.org \
--to=tali@admingilde.org \
--cc=KendallB@scitechsoft.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.