Linux 2.6.24-rc7

Linux 2.6.24-rc7

[Linus Torvalds]

It's been two weeks since rc6, but let's face it, with xmas and new years 
(and birthdays) in between, there hasn't actually been a lot of working 
days, and the incremental patch from -rc6 is about half the size of the 
one from rc5->rc6.

And I'll be charitable and claim it's because it's all stabilizing, and 
not because we've all been in a drunken stupor over the holidays.

The shortlog (appended below) is short and fairly informative. It's all 
really just a lot of rather small changes. The diffstat shows a lot of 
one- and two-liners, with just a few drivers (and the Cell platform) 
getting a bit more attention, and the SLUB support of /proc/slabinfo 
showing up as a blip.

Both git trees and tar-balls/patches pushed out, should be mirroring out 
within minutes. So there are no excuses to not try it out, and see if your 
favorite regression has been fixed.

		Linus

---
Akos Maroy (1):
      fix: using joysticks in 32 bit applications on 64 bit systems

Al Viro (20):
      [TG3]: Endianness annotations.
      [TG3]: Endianness bugfix.
      typhoon: endianness bug in tx/rx byte counters
      typhoon: missing le32_to_cpu() in get_drvinfo
      typhoon: set_settings broken on big-endian
      typhoon: missed rx overruns on big-endian
      typhoon: memory corruptor on big-endian if TSO is enabled
      typhoon: trivial endianness annotations
      cycx: annotations and fixes (.24 fodder?)
      asix fixes
      yellowfin: annotations and fixes (.24 fodder?)
      dl2k endianness fixes (.24 fodder?)
      r8169 endianness
      rrunner: use offsetof() instead of homegrown insanity
      3c574 and 3c589 endianness fixes (.24?)
      fec_mpc52xx: write in C...
      3c359 endianness annotations and fixes
      uml: user of helper_wait() got missed when it got extra arguments
      restrict reading from /proc/<pid>/maps to those who share ->mm or can ptrace pid
      [CASSINI]: Fix endianness bug.

Bartlomiej Zolnierkiewicz (10):
      ide-cd: fix SAMSUNG CD-ROM SCR-3231 quirk
      ide-cd: fix ACER/AOpen 24X CDROM speed reporting on big-endian machines
      ide-cd: use ide_cd_release() in ide_cd_probe()
      ide-cd: fix error messages in cdrom_{read,write}_check_ireason()
      ide-cd: add missing 'ireason' masking to cdrom_write_intr()
      ide-cd: fix error messages in cdrom_write_intr()
      ide-cd: add error message for DMA error to cdrom_read_intr()
      ide-cd: fix error message in cdrom_pc_intr()
      ide-cd: fix 'ireason' reporting in cdrom_pc_intr()
      cmd64x: fix hwif->chipset setup

Bob Nelson (1):
      [POWERPC] Oprofile: Remove dependency on spufs module

Borislav Petkov (1):
      MAINTAINERS: update ide-cd entry

Christoph Lameter (3):
      SLUB: Improve hackbench speed
      quicklists: do not release off node pages early
      Revert quicklist need->flush fix

Cory T. Tusar (1):
      tty: fix logic change introduced by wait_event_interruptible_timeout()

Cyrill Gorcunov (1):
      NET: mac80211: fix inappropriate memory freeing

Daniel Walker (1):
      ps3: vuart: fix error path locking

Dave Dillow (1):
      [SCSI] SRP transport: only remove our own entries

Dave Young (1):
      [BLUETOOTH]: put_device before device_del fix

David Brownell (1):
      pcmcia: remove pxa2xx_lubbock build warning

David Dillow (1):
      IB/srp: Fix list corruption/oops on module reload

David S. Miller (9):
      [NET]: Correct two mistaken skb_reset_mac_header() conversions.
      [SPARC64]: Fix OOPS in dma_sync_*_for_device()
      [SPARC64]: Implement pci_resource_to_user()
      [SERIAL]: Fix section mismatches in Sun serial console drivers.
      [CASSINI]: Revert 'dont touch page_count'.
      [CASSINI]: Program parent Intel31154 bridge when necessary.
      [CASSINI]: Set skb->truesize properly on receive packets.
      [CASSINI]: Fix two obvious NAPI bugs.
      [CASSINI]: Bump driver version and release date.

Denis V. Lunev (1):
      [IPV4]: OOPS with NETLINK_FIB_LOOKUP netlink socket

Eric Dumazet (1):
      [XFRM]: Do not define km_migrate() if !CONFIG_XFRM_MIGRATE

Eric Sandeen (3):
      ecryptfs: fix string overflow on long cipher names
      ecryptfs: fix unlocking in error paths
      ecryptfs: redo dget,mntget on dentry_open failure

Gavin McCullagh (1):
      [TCP]: use non-delayed ACK for congestion control RTT

Geoff Levand (1):
      [POWERPC] PS3: Fix printing of os-area magic numbers

Greg Kroah-Hartman (1):
      Modules: fix memory leak of module names

Gregory CLEMENT (1):
      MACB: clear transmit buffers properly on transmit underrun

Hans Verkuil (1):
      V4L/DVB (6876): ivtv: mspx4xx needs a longer i2c udelay

Hans-Jürgen Koch (1):
      UIO: Add a MAINTAINERS entry for Userspace I/O

Herbert Xu (2):
      [IPSEC]: Avoid undefined shift operation when testing algorithm ID
      [CRYPTO] padlock: Fix spurious ECB page fault

Ingo Molnar (4):
      sched: fix gcc warnings
      scsi: revert "[SCSI] Get rid of scsi_cmnd->done"
      hda_intel suspend latency: shorten codec read
      CPU hotplug: fix cpu_is_offline() on !CONFIG_HOTPLUG_CPU

James Bottomley (1):
      [SCSI] scsi_sysfs: restore prep_fn when ULD is removed

James Morris (1):
      NFS: add newline to kernel warning message in auth_gss code

Jan Kara (2):
      Fix computation of SKB size for quota messages
      Don't send quota messages repeatedly when hardlimit reached

Jean Delvare (1):
      hwmon: (w83627ehf) Be more careful when changing VID input level

Joe Perches (15):
      [SPARC64]: Spelling fixes
      [SPARC32]: Spelling fixes
      [NET] include/net/: Spelling fixes
      [DCCP]: Spelling fixes
      [IRDA]: Spelling fixes
      [IPV6]: Spelling fixes
      [NET] net/core/: Spelling fixes
      [PKT_SCHED]: Spelling fixes
      [NETLABEL]: Spelling fixes
      [SCTP]: Spelling fixes
      [NETFILTER]: Spelling fixes
      [NETFILTER] ipv4: Spelling fixes
      [ATM]: Spelling fixes
      MAINTAINERS: mailing list archives are web links
      drivers/ide/: Spelling fixes

Johannes Berg (3):
      mac80211: fix header ops
      mac80211: round station cleanup timer
      mac80211: warn when receiving frames with unaligned data

Julia Lawall (1):
      [X25]: Add missing x25_neigh_put

Kevin R Page (1):
      USB: VID/PID update for sierra

Li Zefan (1):
      [CONNECTOR]: Return proper error code in cn_call_callback()

Linus Torvalds (6):
      Revert "x86: fix show cpuinfo cpu number always zero"
      [PCI] Do not enable CRS Software Visibility by default
      Unify /proc/slabinfo configuration
      Fix kernel/ptrace.c compile problem (missing "may_attach()")
      Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
      Linux 2.6.24-rc7

Mark McLoughlin (1):
      [INET]: Fix netdev renaming and inet address labels

Mark Ryden (1):
      [IPV4] ARP: Remove not used code

Martin Kusserow (1):
      USB: New device ID for the CP2101 driver

Matthias Goebl (2):
      [ISDN] i4l: 'NO CARRIER' message lost after ldisc flush
      [ISDN]: i4l: Fix DLE handling for i4l-audio

Matthias Mueller (1):
      rtl8187: Add USB ID for Sitecom WL-168 v1 001

Michael Krufky (1):
      V4L/DVB (6871): Kconfig: VIDEO_CX23885 must select DVB_LGDT330X

Michael Wu (2):
      mac80211: Drop out of associated state if link is lost
      p54: add Kconfig description

Mike Frysinger (2):
      x86: fix asm-x86/byteorder.h for userspace export
      x86: fix asm-x86/msr.h for user-space export

Patrick McHardy (1):
      [NETFILTER]: nf_conntrack_ipv4: fix module parameter compatibility

Paul Mackerras (1):
      [POWERPC] Fix build failure on Cell when CONFIG_SPU_FS=y

Paul Moore (1):
      [XFRM]: Audit function arguments misordered

Paul Mundt (1):
      kconfig: obey KCONFIG_ALLCONFIG choices with randconfig.

Pekka Enberg (1):
      slub: register slabinfo to procfs

Pekka J Enberg (1):
      slub: provide /proc/slabinfo

Peter Korsgaard (1):
      USB: Unbreak fsl_usb2_udc

Peter Zijlstra (1):
      lib: proportion: fix underflow in prop_norm_percpu()

Reinette Chatre (1):
      ipw2200: prevent alloc of unspecified size on stack

Richard Purdie (2):
      leds: Fix leds_list_lock locking issues
      leds: Fix locomo LED driver oops

Russ Anderson (2):
      [IA64] Update Altix BTE error return status patch
      [IA64] Update Altix nofault code

Rusty Russell (1):
      fix lguest rmmod "bad pgd"

Samuel Thibault (1):
      Console is utf-8 by default

Simon Horman (2):
      [IPV4]: Fix ip command line processing.
      [IPV4] Fix ip=dhcp regression

Stephen Hemminger (2):
      [NET] tc_nat: header install
      [VETH]: move veth.h to include/linux

Timo Teras (1):
      [IPV4] ip_gre: set mac_header correctly in receive path

Toyo Abe (1):
      [TUNTAP]: Fix wrong debug message.

Trond Myklebust (4):
      NFS: Fix a possible Oops in fs/nfs/super.c
      NFSv4: Fix circular locking dependency in nfs4_kill_renewd
      NFSv4: nfs4_open_confirm must not set the open_owner as confirmed on error
      NFSv4: Fix open_to_lock_owner sequenceid allocation...

Wei Yongjun (1):
      [NET]: Fix function put_cmsg() which may cause usr application memory overflow

Zhu Yi (1):
      iwlwifi: fix possible priv->mutex deadlock during suspend

Re: Linux 2.6.24-rc7

[Mark Lord]

Linus Torvalds wrote:
..
> Both git trees and tar-balls/patches pushed out, should be mirroring out 
> within minutes. So there are no excuses to not try it out, and see if your 
> favorite regression has been fixed.
..

We're still missing the sata_qstor regression fix from Tejun,
and the patch from Venkatesh Pallipadi that reinstates max_cstate
in sysfs for !CPU_IDLE.

Cheers

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Sun, 6 Jan 2008, Mark Lord wrote:
> 
> We're still missing the sata_qstor regression fix from Tejun,
> and the patch from Venkatesh Pallipadi that reinstates max_cstate
> in sysfs for !CPU_IDLE.

I'm not seeing those in my inbox. I don't go out trolling for patches, 
because I expect that if the author of the patch really wants me to apply 
it, he'd send it upstream.

But I know a number of people are on vacation, and I suspect some of these 
fixes are just queued up, waiting for that.  E.g. I think Jeff is supposed 
to be back this week, etc..

			Linus

Re: Linux 2.6.24-rc7

[Tejun Heo]

Hello,

Linus Torvalds wrote:
> On Sun, 6 Jan 2008, Mark Lord wrote:
>> We're still missing the sata_qstor regression fix from Tejun,
>> and the patch from Venkatesh Pallipadi that reinstates max_cstate
>> in sysfs for !CPU_IDLE.
> 
> I'm not seeing those in my inbox. I don't go out trolling for patches, 
> because I expect that if the author of the patch really wants me to apply 
> it, he'd send it upstream.
> 
> But I know a number of people are on vacation, and I suspect some of these 
> fixes are just queued up, waiting for that.  E.g. I think Jeff is supposed 
> to be back this week, etc..

Yeap, I have two patches pending for #upstream-fixes.

http://article.gmane.org/gmane.linux.ide/26750
http://article.gmane.org/gmane.linux.ide/26822

Jeff, can you ack those?

Thanks.

-- 
tejun

Re: Linux 2.6.24-rc7 Build Failure on headers_install

[Kamalesh Babulal]

Hi,

The make allyesconfig build fails on x86_64 (AMD box) with the following
error

  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  CALL    scripts/checksyscalls.sh
  CHK     include/linux/compile.h
  CHK     include/linux/version.h
make[2]: `scripts/unifdef' is up to date.
make[2]: *** No rule to make target `|', needed by `asm-generic'.  Stop.
make[1]: *** [headers_install] Error 2
make: *** [vmlinux] Error 2

-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

Re: Linux 2.6.24-rc7 Build Failure on headers_install

[Sam Ravnborg]

On Mon, Jan 07, 2008 at 02:18:27PM +0530, Kamalesh Babulal wrote:
> Hi,
> 
> The make allyesconfig build fails on x86_64 (AMD box) with the following
> error
> 
>   CHK     include/linux/version.h
>   CHK     include/linux/utsrelease.h
>   CALL    scripts/checksyscalls.sh
>   CHK     include/linux/compile.h
>   CHK     include/linux/version.h
> make[2]: `scripts/unifdef' is up to date.
> make[2]: *** No rule to make target `|', needed by `asm-generic'.  Stop.
> make[1]: *** [headers_install] Error 2
> make: *** [vmlinux] Error 2

Which make version are you using - it looks like a make bug.
Did this occur with an older kernel or has this behaviour just started?

To get further you can disable "headers check" in kernel hacking menu
but we need to find out why it fails for you.

Note: '|' is used to say that a prerequisite is 'order only' in
scripts/Makefile.headersinst

	Sam

Re: Linux 2.6.24-rc7 Build Failure on headers_install

[Kamalesh Babulal]

Sam Ravnborg wrote:
> On Mon, Jan 07, 2008 at 02:18:27PM +0530, Kamalesh Babulal wrote:
>> Hi,
>>
>> The make allyesconfig build fails on x86_64 (AMD box) with the following
>> error
>>
>>   CHK     include/linux/version.h
>>   CHK     include/linux/utsrelease.h
>>   CALL    scripts/checksyscalls.sh
>>   CHK     include/linux/compile.h
>>   CHK     include/linux/version.h
>> make[2]: `scripts/unifdef' is up to date.
>> make[2]: *** No rule to make target `|', needed by `asm-generic'.  Stop.
>> make[1]: *** [headers_install] Error 2
>> make: *** [vmlinux] Error 2
> 
> Which make version are you using - it looks like a make bug.
> Did this occur with an older kernel or has this behaviour just started?
> 
> To get further you can disable "headers check" in kernel hacking menu
> but we need to find out why it fails for you.
> 
> Note: '|' is used to say that a prerequisite is 'order only' in
> scripts/Makefile.headersinst
> 
> 	Sam
Hi Sam,

After disabling the headers_check, the build failure is not seen,
i tried compiling 2.6.24-rc{2,3,4,5,6,7} all of these have this failure.
And when i tried compiling 2.6.23 with allyesconfig i got the following
error

  SYSCALL arch/x86_64/vdso/vdso.so
/usr/bin/ld: section .data [ffffffffff700900 -> ffffffffff700917] overlaps section .plt [ffffffffff7008e4 -> ffffffffff700903]
collect2: ld returned 1 exit status
make[1]: *** [arch/x86_64/vdso/vdso.so] Error 1
make: *** [arch/x86_64/vdso] Error 2

# make --version
GNU Make version 3.79.1

# ld -v
GNU ld version 2.14.90.0.4 20030523

# gcc --version
gcc (GCC) 3.2.3 20030502 

let me know if, i could help you with more information.
-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

Re: Linux 2.6.24-rc7 Build Failure on headers_install

[Sam Ravnborg]

On Tue, Jan 08, 2008 at 04:21:04PM +0530, Kamalesh Babulal wrote:
> Sam Ravnborg wrote:
> > On Mon, Jan 07, 2008 at 02:18:27PM +0530, Kamalesh Babulal wrote:
> >> Hi,
> >>
> >> The make allyesconfig build fails on x86_64 (AMD box) with the following
> >> error
> >>
> >>   CHK     include/linux/version.h
> >>   CHK     include/linux/utsrelease.h
> >>   CALL    scripts/checksyscalls.sh
> >>   CHK     include/linux/compile.h
> >>   CHK     include/linux/version.h
> >> make[2]: `scripts/unifdef' is up to date.
> >> make[2]: *** No rule to make target `|', needed by `asm-generic'.  Stop.
> >> make[1]: *** [headers_install] Error 2
> >> make: *** [vmlinux] Error 2
> > 
> > Which make version are you using - it looks like a make bug.
> > Did this occur with an older kernel or has this behaviour just started?
> > 
> > To get further you can disable "headers check" in kernel hacking menu
> > but we need to find out why it fails for you.
> > 
> > Note: '|' is used to say that a prerequisite is 'order only' in
> > scripts/Makefile.headersinst
> > 
> > 	Sam
> Hi Sam,
> 
> After disabling the headers_check, the build failure is not seen,
> i tried compiling 2.6.24-rc{2,3,4,5,6,7} all of these have this failure.
> And when i tried compiling 2.6.23 with allyesconfig i got the following
> error
> 
>   SYSCALL arch/x86_64/vdso/vdso.so
> /usr/bin/ld: section .data [ffffffffff700900 -> ffffffffff700917] overlaps section .plt [ffffffffff7008e4 -> ffffffffff700903]
> collect2: ld returned 1 exit status
> make[1]: *** [arch/x86_64/vdso/vdso.so] Error 1
> make: *** [arch/x86_64/vdso] Error 2
No clue why you see this?

> 
> # make --version
> GNU Make version 3.79.1

The "orders only" facility were added in GNU make 3.80 so that explains the
bug you see in first place.
We should try to avoid this use since we do not require make 3.80 yet.


	Sam

Re: Linux 2.6.24-rc7 Build-Failure at __you_cannot_kmalloc_that_much

[Kamalesh Babulal]

[-- Attachment #1: Type: text/plain, Size: 711 bytes --]

Hi,

The defconfig make fails on x86_64 (AMD box) with following error

  CHK     include/linux/utsrelease.h
  CALL    scripts/checksyscalls.sh
  CHK     include/linux/compile.h
  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
drivers/built-in.o(.init.text+0x8d76): In function `dmi_id_init':
: undefined reference to `__you_cannot_kmalloc_that_much'
make: *** [.tmp_vmlinux1] Error 1


# gcc --version
gcc (GCC) 3.2.3 20030502 (Red Hat Linux 3.2.3-59)

This was reported by Adrian Bunk http://lkml.org/lkml/2007/12/1/39

-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 34512 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Mon Jan  7 16:47:07 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_HT=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y

#
# Power management options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_SMP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_SMP_POSSIBLE=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_HT_IRQ is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=4000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=y

#
# Protocols
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
CONFIG_AMD8111_ETH=y
# CONFIG_AMD8111E_NAPI is not set
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set

#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_OSS is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

Re: Linux 2.6.24-rc7 Build-Failure at __you_cannot_kmalloc_that_much

[Andrew Morton]

On Mon, 07 Jan 2008 16:06:20 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:

> The defconfig make fails on x86_64 (AMD box) with following error
> 
>   CHK     include/linux/utsrelease.h
>   CALL    scripts/checksyscalls.sh
>   CHK     include/linux/compile.h
>   GEN     .version
>   CHK     include/linux/compile.h
>   UPD     include/linux/compile.h
>   CC      init/version.o
>   LD      init/built-in.o
>   LD      .tmp_vmlinux1
> drivers/built-in.o(.init.text+0x8d76): In function `dmi_id_init':
> : undefined reference to `__you_cannot_kmalloc_that_much'
> make: *** [.tmp_vmlinux1] Error 1
> 
> 
> # gcc --version
> gcc (GCC) 3.2.3 20030502 (Red Hat Linux 3.2.3-59)
> 
> This was reported by Adrian Bunk http://lkml.org/lkml/2007/12/1/39

That's odd.  afacit the only kmalloc in dmi_id_init() is

        dmi_dev = kzalloc(sizeof(*dmi_dev), GFP_KERNEL);

and even gcc-3.2.3 should be able to get that right.

Could you please a) verify that simply removing that line fixes the build
error and then b) try to find some way of fixing it?

Try replacing `sizeof(*dmi_dev)' with `sizeof(struct dmi_device_attribute)'
and any other tricks you can think of to try to make the compiler process
the code differently.

Re: Linux 2.6.24-rc7 Build-Failure at __you_cannot_kmalloc_that_much

[Christoph Lameter]

On Mon, 7 Jan 2008, Andrew Morton wrote:

> > : undefined reference to `__you_cannot_kmalloc_that_much'

There is also a kernel.org bugzilla for this at

http://bugzilla.kernel.org/show_bug.cgi?id=9669
For some reason my adds to this do not show up.

In both cases we have a 

k(z/m)alloc(sizeof(*pointer), ...)

that is for some reason failing. I guess what happens is that the function 
in which this occurs is too complex for gcc 3.2. Thus it stops constant 
folding the sizeof(*pointer) in the complex inline-if-cascade that SLAB 
needs to determine the cache and does not eliminate the 
__you_cannot_kmalloc_that_much branch().

SLUB in that case just puts a series of if comparisions in the code. This 
means compilation does not fail but a large amount of code is generated.

We could replace the __you_cannot_kmalloc_that_much() with a BUG() 
statement so we have the same effect in SLAB?

Re: Linux 2.6.24-rc7 Build-Failure at __you_cannot_kmalloc_that_much

[Andrew Morton]

On Mon, 7 Jan 2008 10:31:53 -0800 (PST)
Christoph Lameter <clameter@sgi.com> wrote:

> On Mon, 7 Jan 2008, Andrew Morton wrote:
> 
> > > : undefined reference to `__you_cannot_kmalloc_that_much'
> 
> There is also a kernel.org bugzilla for this at
> 
> http://bugzilla.kernel.org/show_bug.cgi?id=9669
> For some reason my adds to this do not show up.
> 
> In both cases we have a 
> 
> k(z/m)alloc(sizeof(*pointer), ...)
> 
> that is for some reason failing. I guess what happens is that the function 
> in which this occurs is too complex for gcc 3.2. Thus it stops constant 
> folding the sizeof(*pointer) in the complex inline-if-cascade that SLAB 
> needs to determine the cache and does not eliminate the 
> __you_cannot_kmalloc_that_much branch().
> 
> SLUB in that case just puts a series of if comparisions in the code. This 
> means compilation does not fail but a large amount of code is generated.

ug.  Silent and nasty.

> We could replace the __you_cannot_kmalloc_that_much() with a BUG() 
> statement so we have the same effect in SLAB?

I think it'd be better to just put suitable workarounds at the offending
callsites.  We've only seen three or four of them in several months.

Re: Linux 2.6.24-rc7 Build-Failure at __you_cannot_kmalloc_that_much

[Jean Delvare]

Hi Andrew, hi Chritoph,

On Mon, 7 Jan 2008 11:38:31 -0800, Andrew Morton wrote:
> On Mon, 7 Jan 2008 10:31:53 -0800 (PST)
> Christoph Lameter <clameter@sgi.com> wrote:
> 
> > On Mon, 7 Jan 2008, Andrew Morton wrote:
> > 
> > > > : undefined reference to `__you_cannot_kmalloc_that_much'
> > 
> > There is also a kernel.org bugzilla for this at
> > 
> > http://bugzilla.kernel.org/show_bug.cgi?id=9669
> > For some reason my adds to this do not show up.
> > 
> > In both cases we have a 
> > 
> > k(z/m)alloc(sizeof(*pointer), ...)
> > 
> > that is for some reason failing. I guess what happens is that the function 
> > in which this occurs is too complex for gcc 3.2. Thus it stops constant 
> > folding the sizeof(*pointer) in the complex inline-if-cascade that SLAB 
> > needs to determine the cache and does not eliminate the 
> > __you_cannot_kmalloc_that_much branch().

Interesting theory... So I tried to split half of the code of
dmi_id_init() to a subfunction and bingo! gcc 3.2.3 is now able to
build it properly. Thanks for the hint!

> > SLUB in that case just puts a series of if comparisions in the code. This 
> > means compilation does not fail but a large amount of code is generated.
> 
> ug.  Silent and nasty.
> 
> > We could replace the __you_cannot_kmalloc_that_much() with a BUG() 
> > statement so we have the same effect in SLAB?
> 
> I think it'd be better to just put suitable workarounds at the offending
> callsites.  We've only seen three or four of them in several months.

Here's a workaround for dmi-id.

Subject: Fix for __you_cannot_kmalloc_that_much failure in dmi-id

gcc 3.2 has a hard time coping with the code in dmi_id_init():

drivers/built-in.o(.init.text+0x789e): In function `dmi_id_init':
: undefined reference to `__you_cannot_kmalloc_that_much'
make: *** [.tmp_vmlinux1] Error 1

Moving half of the code to a separate function seems to help. This is
a no-op for gcc 4.1 which will successfully inline the code anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/firmware/dmi-id.c |   19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

--- linux-2.6.24-rc7.orig/drivers/firmware/dmi-id.c	2007-10-24 09:59:28.000000000 +0200
+++ linux-2.6.24-rc7/drivers/firmware/dmi-id.c	2008-01-08 10:32:00.000000000 +0100
@@ -175,12 +175,11 @@ static struct device *dmi_dev;
 
 extern int dmi_available;
 
-static int __init dmi_id_init(void)
+/* In a separate function to keep gcc 3.2 happy - do NOT merge this in
+   dmi_id_init! */
+static void __init dmi_id_init_attr_table(void)
 {
-	int ret, i;
-
-	if (!dmi_available)
-		return -ENODEV;
+	int i;
 
 	/* Not necessarily all DMI fields are available on all
 	 * systems, hence let's built an attribute table of just
@@ -205,6 +204,16 @@ static int __init dmi_id_init(void)
 	ADD_DMI_ATTR(chassis_serial,    DMI_CHASSIS_SERIAL);
 	ADD_DMI_ATTR(chassis_asset_tag, DMI_CHASSIS_ASSET_TAG);
 	sys_dmi_attributes[i++] = &sys_dmi_modalias_attr.attr;
+}
+
+static int __init dmi_id_init(void)
+{
+	int ret;
+
+	if (!dmi_available)
+		return -ENODEV;
+
+	dmi_id_init_attr_table();
 
 	ret = class_register(&dmi_class);
 	if (ret)

I'll now check if I can do something similar for snd-mixer-oss.

-- 
Jean Delvare

Re: Linux 2.6.24-rc7 Build-Failure at __you_cannot_kmalloc_that_much

[Kamalesh Babulal]

On Tue, Jan 08, 2008 at 10:56:09AM +0100, Jean Delvare wrote:
> Hi Andrew, hi Chritoph,
> 
> On Mon, 7 Jan 2008 11:38:31 -0800, Andrew Morton wrote:
> > On Mon, 7 Jan 2008 10:31:53 -0800 (PST)
> > Christoph Lameter <clameter@sgi.com> wrote:
> > 
> > > On Mon, 7 Jan 2008, Andrew Morton wrote:
> > > 
> > > > > : undefined reference to `__you_cannot_kmalloc_that_much'
> > > 
> > > There is also a kernel.org bugzilla for this at
> > > 
> > > http://bugzilla.kernel.org/show_bug.cgi?id=9669
> > > For some reason my adds to this do not show up.
> > > 
> > > In both cases we have a 
> > > 
> > > k(z/m)alloc(sizeof(*pointer), ...)
> > > 
> > > that is for some reason failing. I guess what happens is that the function 
> > > in which this occurs is too complex for gcc 3.2. Thus it stops constant 
> > > folding the sizeof(*pointer) in the complex inline-if-cascade that SLAB 
> > > needs to determine the cache and does not eliminate the 
> > > __you_cannot_kmalloc_that_much branch().
> 
> Interesting theory... So I tried to split half of the code of
> dmi_id_init() to a subfunction and bingo! gcc 3.2.3 is now able to
> build it properly. Thanks for the hint!
> 
> > > SLUB in that case just puts a series of if comparisions in the code. This 
> > > means compilation does not fail but a large amount of code is generated.
> > 
> > ug.  Silent and nasty.
> > 
> > > We could replace the __you_cannot_kmalloc_that_much() with a BUG() 
> > > statement so we have the same effect in SLAB?
> > 
> > I think it'd be better to just put suitable workarounds at the offending
> > callsites.  We've only seen three or four of them in several months.
> 
> Here's a workaround for dmi-id.
> 
> Subject: Fix for __you_cannot_kmalloc_that_much failure in dmi-id
> 
> gcc 3.2 has a hard time coping with the code in dmi_id_init():
> 
> drivers/built-in.o(.init.text+0x789e): In function `dmi_id_init':
> : undefined reference to `__you_cannot_kmalloc_that_much'
> make: *** [.tmp_vmlinux1] Error 1
> 
> Moving half of the code to a separate function seems to help. This is
> a no-op for gcc 4.1 which will successfully inline the code anyway.

Hi Jean,

Thank you, I have tested the patch, it fixes the build failure.


 Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
 Signed-off-by: Jean Delvare <khali@linux-fr.org>
 ---
 drivers/firmware/dmi-id.c |   19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)
 
--- linux-2.6.24-rc7.orig/drivers/firmware/dmi-id.c	2007-10-24 09:59:28.000000000 +0200
+++ linux-2.6.24-rc7/drivers/firmware/dmi-id.c	2008-01-08 10:32:00.000000000 +0100
@@ -175,12 +175,11 @@ static struct device *dmi_dev;

 extern int dmi_available;

-static int __init dmi_id_init(void)
+/* In a separate function to keep gcc 3.2 happy - do NOT merge this in
+   dmi_id_init! */
+static void __init dmi_id_init_attr_table(void)
 {
-	int ret, i;
-
-	if (!dmi_available)
-		return -ENODEV;
+	int i;
 
 	/* Not necessarily all DMI fields are available on all
 	 * systems, hence let's built an attribute table of just
@@ -205,6 +204,16 @@ static int __init dmi_id_init(void)
 	ADD_DMI_ATTR(chassis_serial,    DMI_CHASSIS_SERIAL);
 	ADD_DMI_ATTR(chassis_asset_tag, DMI_CHASSIS_ASSET_TAG);
 	sys_dmi_attributes[i++] = &sys_dmi_modalias_attr.attr;
+}
+
+static int __init dmi_id_init(void)
+{
+	int ret;
+
+	if (!dmi_available)
+		return -ENODEV;
+
+	dmi_id_init_attr_table();

 	ret = class_register(&dmi_class);
 	if (ret)

I'll now check if I can do something similar for snd-mixer-oss.
 
-- 
Jean Delvare

Fix for __you_cannot_kmalloc_that_much failure with gcc 3.2

[Jean Delvare]

On Tue, 8 Jan 2008 10:56:09 +0100, Jean Delvare wrote:
> I'll now check if I can do something similar for snd-mixer-oss.

And here you go, this is a unified patch fixing both bugs. The dmi-id
part is unchanged. Testers and reviewers are welcome.

* * * * *

gcc 3.2 has a hard time coping with the code in dmi_id_init():

drivers/built-in.o(.init.text+0x789e): In function `dmi_id_init':
: undefined reference to `__you_cannot_kmalloc_that_much'
make: *** [.tmp_vmlinux1] Error 1

Moving half of the code to a separate function seems to help. This is
a no-op for gcc 4.1 which will successfully inline the code anyway.

Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>

A similar problem has been reported in snd_mixer_oss_build_input(),
fix it as well.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Dave Airlie <airlied@linux.ie>
---
 drivers/firmware/dmi-id.c  |   17 +++++--
 sound/core/oss/mixer_oss.c |  101 +++++++++++++++++++++++++++-----------------
 2 files changed, 75 insertions(+), 43 deletions(-)

--- linux-2.6.24-rc7.orig/drivers/firmware/dmi-id.c	2008-01-08 12:57:48.000000000 +0100
+++ linux-2.6.24-rc7/drivers/firmware/dmi-id.c	2008-01-08 13:06:15.000000000 +0100
@@ -175,12 +175,9 @@ static struct device *dmi_dev;
 
 extern int dmi_available;
 
-static int __init dmi_id_init(void)
+static void __init dmi_id_init_attr_table(void)
 {
-	int ret, i;
-
-	if (!dmi_available)
-		return -ENODEV;
+	int i;
 
 	/* Not necessarily all DMI fields are available on all
 	 * systems, hence let's built an attribute table of just
@@ -205,6 +202,16 @@ static int __init dmi_id_init(void)
 	ADD_DMI_ATTR(chassis_serial,    DMI_CHASSIS_SERIAL);
 	ADD_DMI_ATTR(chassis_asset_tag, DMI_CHASSIS_ASSET_TAG);
 	sys_dmi_attributes[i++] = &sys_dmi_modalias_attr.attr;
+}
+
+static int __init dmi_id_init(void)
+{
+	int ret;
+
+	if (!dmi_available)
+		return -ENODEV;
+
+	dmi_id_init_attr_table();
 
 	ret = class_register(&dmi_class);
 	if (ret)
--- linux-2.6.24-rc7.orig/sound/core/oss/mixer_oss.c	2008-01-08 12:57:48.000000000 +0100
+++ linux-2.6.24-rc7/sound/core/oss/mixer_oss.c	2008-01-08 13:21:12.000000000 +0100
@@ -925,6 +925,68 @@ static void mixer_slot_clear(struct snd_
 	rslot->number = idx;
 }
 
+/* In a separate function to keep gcc 3.2 happy - do NOT merge this in
+   snd_mixer_oss_build_input! */
+static int snd_mixer_oss_build_test_all(struct snd_mixer_oss *mixer,
+					struct snd_mixer_oss_assign_table *ptr,
+					struct slot *slot)
+{
+	char str[64];
+	int err;
+
+	err = snd_mixer_oss_build_test(mixer, slot, ptr->name, ptr->index,
+				       SNDRV_MIXER_OSS_ITEM_GLOBAL);
+	if (err)
+		return err;
+	sprintf(str, "%s Switch", ptr->name);
+	err = snd_mixer_oss_build_test(mixer, slot, str, ptr->index,
+				       SNDRV_MIXER_OSS_ITEM_GSWITCH);
+	if (err)
+		return err;
+	sprintf(str, "%s Route", ptr->name);
+	err = snd_mixer_oss_build_test(mixer, slot, str, ptr->index,
+				       SNDRV_MIXER_OSS_ITEM_GROUTE);
+	if (err)
+		return err;
+	sprintf(str, "%s Volume", ptr->name);
+	err = snd_mixer_oss_build_test(mixer, slot, str, ptr->index,
+				       SNDRV_MIXER_OSS_ITEM_GVOLUME);
+	if (err)
+		return err;
+	sprintf(str, "%s Playback Switch", ptr->name);
+	err = snd_mixer_oss_build_test(mixer, slot, str, ptr->index,
+				       SNDRV_MIXER_OSS_ITEM_PSWITCH);
+	if (err)
+		return err;
+	sprintf(str, "%s Playback Route", ptr->name);
+	err = snd_mixer_oss_build_test(mixer, slot, str, ptr->index,
+				       SNDRV_MIXER_OSS_ITEM_PROUTE);
+	if (err)
+		return err;
+	sprintf(str, "%s Playback Volume", ptr->name);
+	err = snd_mixer_oss_build_test(mixer, slot, str, ptr->index,
+				       SNDRV_MIXER_OSS_ITEM_PVOLUME);
+	if (err)
+		return err;
+	sprintf(str, "%s Capture Switch", ptr->name);
+	err = snd_mixer_oss_build_test(mixer, slot, str, ptr->index,
+				       SNDRV_MIXER_OSS_ITEM_CSWITCH);
+	if (err)
+		return err;
+	sprintf(str, "%s Capture Route", ptr->name);
+	err = snd_mixer_oss_build_test(mixer, slot, str, ptr->index,
+				       SNDRV_MIXER_OSS_ITEM_CROUTE);
+	if (err)
+		return err;
+	sprintf(str, "%s Capture Volume", ptr->name);
+	err = snd_mixer_oss_build_test(mixer, slot, str, ptr->index,
+				       SNDRV_MIXER_OSS_ITEM_CVOLUME);
+	if (err)
+		return err;
+
+	return 0;
+}
+
 /*
  * build an OSS mixer element.
  * ptr_allocated means the entry is dynamically allocated (change via proc file).
@@ -944,44 +1006,7 @@ static int snd_mixer_oss_build_input(str
 
 	memset(&slot, 0, sizeof(slot));
 	memset(slot.numid, 0xff, sizeof(slot.numid)); /* ID_UNKNOWN */
-	if (snd_mixer_oss_build_test(mixer, &slot, ptr->name, ptr->index,
-				     SNDRV_MIXER_OSS_ITEM_GLOBAL))
-		return 0;
-	sprintf(str, "%s Switch", ptr->name);
-	if (snd_mixer_oss_build_test(mixer, &slot, str, ptr->index,
-				     SNDRV_MIXER_OSS_ITEM_GSWITCH))
-		return 0;
-	sprintf(str, "%s Route", ptr->name);
-	if (snd_mixer_oss_build_test(mixer, &slot, str, ptr->index,
-				     SNDRV_MIXER_OSS_ITEM_GROUTE))
-		return 0;
-	sprintf(str, "%s Volume", ptr->name);
-	if (snd_mixer_oss_build_test(mixer, &slot, str, ptr->index,
-				     SNDRV_MIXER_OSS_ITEM_GVOLUME))
-		return 0;
-	sprintf(str, "%s Playback Switch", ptr->name);
-	if (snd_mixer_oss_build_test(mixer, &slot, str, ptr->index,
-				     SNDRV_MIXER_OSS_ITEM_PSWITCH))
-		return 0;
-	sprintf(str, "%s Playback Route", ptr->name);
-	if (snd_mixer_oss_build_test(mixer, &slot, str, ptr->index,
-				     SNDRV_MIXER_OSS_ITEM_PROUTE))
-		return 0;
-	sprintf(str, "%s Playback Volume", ptr->name);
-	if (snd_mixer_oss_build_test(mixer, &slot, str, ptr->index,
-				     SNDRV_MIXER_OSS_ITEM_PVOLUME))
-		return 0;
-	sprintf(str, "%s Capture Switch", ptr->name);
-	if (snd_mixer_oss_build_test(mixer, &slot, str, ptr->index,
-				     SNDRV_MIXER_OSS_ITEM_CSWITCH))
-		return 0;
-	sprintf(str, "%s Capture Route", ptr->name);
-	if (snd_mixer_oss_build_test(mixer, &slot, str, ptr->index,
-				     SNDRV_MIXER_OSS_ITEM_CROUTE))
-		return 0;
-	sprintf(str, "%s Capture Volume", ptr->name);
-	if (snd_mixer_oss_build_test(mixer, &slot, str, ptr->index,
-				     SNDRV_MIXER_OSS_ITEM_CVOLUME))
+	if (snd_mixer_oss_build_test_all(mixer, ptr, &slot))
 		return 0;
 	down_read(&mixer->card->controls_rwsem);
 	if (ptr->index == 0 && (kctl = snd_mixer_oss_test_id(mixer, "Capture Source", 0)) != NULL) {


-- 
Jean Delvare

Re: Linux 2.6.24-rc7 Build-Failure at __you_cannot_kmalloc_that_much

[Arjan van de Ven]

On Mon, 7 Jan 2008 10:31:53 -0800 (PST)
Christoph Lameter <clameter@sgi.com> wrote:

> We could replace the __you_cannot_kmalloc_that_much() with a BUG() 
> statement so we have the same effect in SLAB?
> 

sounds like a bad idea; a compile time failure is of course nicer than
a runtime failure for the cases we can find the bug at compile-time already.

We should however investigate using one of the two following gcc function attributes;
they can give the user a lot better diagnostic information than what we have
right now:


error ("message")
    If this attribute is used on a function declaration and a call to
such a function is not eliminated through dead code elimination or
other optimizations, an error which will include message will be
diagnosed. This is useful for compile time checking, especially
together with __builtin_constant_p and inline functions where checking
the inline function arguments is not possible through extern char
[(condition) ? 1 : -1]; tricks. While it is possible to leave the
function undefined and thus invoke a link failure, when using this
attribute the problem will be diagnosed earlier and with exact location
of the call even in presence of inline functions or when not emitting
debugging information.

warning ("message")
    If this attribute is used on a function declaration and a call to
such a function is not eliminated through dead code elimination or
other optimizations, a warning which will include message will be
diagnosed. This is useful for compile time checking, especially
together with __builtin_constant_p and inline functions. While it is
possible to define the function with a message in .gnu.warning*
section, when using this attribute the problem will be diagnosed
earlier and with exact location of the call even in presence of inline
functions or when not emitting debugging information. 

-- 
If you want to reach me at my work email, use arjan@linux.intel.com
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org

Re: Linux 2.6.24-rc7 Build-Failure at __you_cannot_kmalloc_that_much

[Christoph Lameter]

On Mon, 7 Jan 2008, Arjan van de Ven wrote:

> sounds like a bad idea; a compile time failure is of course nicer than
> a runtime failure for the cases we can find the bug at compile-time already.
> 

There is not much chance of a runtime failure these days since kmalloc now 
supports up to 4MB allocs.

Re: Linux 2.6.24-rc7 Build-Failure at __you_cannot_kmalloc_that_much

[Kamalesh Babulal]

Andrew Morton wrote:
> On Mon, 07 Jan 2008 16:06:20 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> 
>> The defconfig make fails on x86_64 (AMD box) with following error
>>
>>   CHK     include/linux/utsrelease.h
>>   CALL    scripts/checksyscalls.sh
>>   CHK     include/linux/compile.h
>>   GEN     .version
>>   CHK     include/linux/compile.h
>>   UPD     include/linux/compile.h
>>   CC      init/version.o
>>   LD      init/built-in.o
>>   LD      .tmp_vmlinux1
>> drivers/built-in.o(.init.text+0x8d76): In function `dmi_id_init':
>> : undefined reference to `__you_cannot_kmalloc_that_much'
>> make: *** [.tmp_vmlinux1] Error 1
>>
>>
>> # gcc --version
>> gcc (GCC) 3.2.3 20030502 (Red Hat Linux 3.2.3-59)
>>
>> This was reported by Adrian Bunk http://lkml.org/lkml/2007/12/1/39
> 
> That's odd.  afacit the only kmalloc in dmi_id_init() is
> 
>         dmi_dev = kzalloc(sizeof(*dmi_dev), GFP_KERNEL);
> 
> and even gcc-3.2.3 should be able to get that right.
> 
> Could you please a) verify that simply removing that line fixes the build
> error and then b) try to find some way of fixing it?
> 
> Try replacing `sizeof(*dmi_dev)' with `sizeof(struct dmi_device_attribute)'
> and any other tricks you can think of to try to make the compiler process
> the code differently.
> 

removing the line fixes the issue, but changing the sizeof(*dmi_dev) to
sizeof(struct device) is not helping.

-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

Re: Linux 2.6.24-rc7 Build-Failure at __you_cannot_kmalloc_that_much

[Balbir Singh]

Kamalesh Babulal wrote:
> Andrew Morton wrote:
>> On Mon, 07 Jan 2008 16:06:20 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
>>
>>> The defconfig make fails on x86_64 (AMD box) with following error
>>>
>>>   CHK     include/linux/utsrelease.h
>>>   CALL    scripts/checksyscalls.sh
>>>   CHK     include/linux/compile.h
>>>   GEN     .version
>>>   CHK     include/linux/compile.h
>>>   UPD     include/linux/compile.h
>>>   CC      init/version.o
>>>   LD      init/built-in.o
>>>   LD      .tmp_vmlinux1
>>> drivers/built-in.o(.init.text+0x8d76): In function `dmi_id_init':
>>> : undefined reference to `__you_cannot_kmalloc_that_much'
>>> make: *** [.tmp_vmlinux1] Error 1
>>>
>>>
>>> # gcc --version
>>> gcc (GCC) 3.2.3 20030502 (Red Hat Linux 3.2.3-59)
>>>
>>> This was reported by Adrian Bunk http://lkml.org/lkml/2007/12/1/39
>> That's odd.  afacit the only kmalloc in dmi_id_init() is
>>
>>         dmi_dev = kzalloc(sizeof(*dmi_dev), GFP_KERNEL);
>>
>> and even gcc-3.2.3 should be able to get that right.
>>
>> Could you please a) verify that simply removing that line fixes the build
>> error and then b) try to find some way of fixing it?
>>
>> Try replacing `sizeof(*dmi_dev)' with `sizeof(struct dmi_device_attribute)'
>> and any other tricks you can think of to try to make the compiler process
>> the code differently.
>>
> 
> removing the line fixes the issue, but changing the sizeof(*dmi_dev) to
> sizeof(struct device) is not helping.
> 

Hi, Andrew,

We tried the following, generated stabs information. The size of struct
device is 560 bytes. We found that dead code was not being eliminated
(__you_cannot_kmalloc_that_much), even though no one called that
function. I suspect builtin_constant_p() and dead code elimination as
the root causes of this error.

-- 
	Warm Regards,
	Balbir Singh
	Linux Technology Center
	IBM, ISTL

Re: Linux 2.6.24-rc7 Build-Failure at __you_cannot_kmalloc_that_much

[Jean Delvare]

On Mon, 07 Jan 2008 16:06:20 +0530, Kamalesh Babulal wrote:
> The defconfig make fails on x86_64 (AMD box) with following error
> 
>   CHK     include/linux/utsrelease.h
>   CALL    scripts/checksyscalls.sh
>   CHK     include/linux/compile.h
>   GEN     .version
>   CHK     include/linux/compile.h
>   UPD     include/linux/compile.h
>   CC      init/version.o
>   LD      init/built-in.o
>   LD      .tmp_vmlinux1
> drivers/built-in.o(.init.text+0x8d76): In function `dmi_id_init':
> : undefined reference to `__you_cannot_kmalloc_that_much'
> make: *** [.tmp_vmlinux1] Error 1
> 
> 
> # gcc --version
> gcc (GCC) 3.2.3 20030502 (Red Hat Linux 3.2.3-59)
> 
> This was reported by Adrian Bunk http://lkml.org/lkml/2007/12/1/39

And by myself long before that...
http://lkml.org/lkml/2007/10/1/308

Since then I have had a private report that upgrading libtool would
solve the issue, but I have to admit I'm a bit skeptical, as I don't
quite get how libtool would be involved in the kernel building process
at all.

-- 
Jean Delvare

Re: Linux 2.6.24-rc7 kernel BUG at kernel/sched.c:5156!

[Kamalesh Babulal]

Hi,

When booting the 2.6.24-rc7 kernel on the powerpc, kernel bug at
kernel.sched.c is triggered

[    0.000000] Kernel command line: ro console=hvc0 rhgb quiet root=LABEL=/ 
[    0.149567] BUG: scheduling while atomic: kthreadd/2/0x0006f34c
[    0.149655] BUG: scheduling while atomic: kthreadd/3/0xbe0d8168
[    0.149714] ------------[ cut here ]------------
[    0.149722] kernel BUG at kernel/sched.c:5156!
cpu 0x0: Vector: 700 (Program Check) at [c0000001be0dbd70]
    pc: c00000000006c090: .migration_thread+0x64/0x31c
    lr: c00000000008e348: .kthread+0x78/0xc4
    sp: c0000001be0dbff0
   msr: 8000000000029032
  current = 0xc0000000ee11ccc0
  paca    = 0xc000000000532d00
    pid   = 3, comm = kthreadd
kernel BUG at kernel/sched.c:5156!
enter ? for help
[c0000001be0dc0b0] c00000000008e348 .kthread+0x78/0xc4
[c0000001be0dc140] c00000000002a550 .kernel_thread+0x4c/0x68

0:mon> t
[c0000001be0dc0b0] c00000000008e348 .kthread+0x78/0xc4
[c0000001be0dc140] c00000000002a550 .kernel_thread+0x4c/0x68
0:mon> r
R00 = 0000000000000001   R16 = 4000000001c00000
R01 = c0000001be0dbff0   R17 = c000000000403920
R02 = c0000000006072f8   R18 = 0000000000000000
R03 = 0000000000000000   R19 = 000000000019b000
R04 = c0000000ee11ccc0   R20 = c0000000004c9550
R05 = 0000000000000000   R21 = 00000000020c9550
R06 = c000000000532d00   R22 = 00000000020c97c0
R07 = c0000001be0d81b0   R23 = c0000000004c97c0
R08 = 0000000000000000   R24 = 00000000018bf8d0
R09 = c0000000ee11ccbf   R25 = 0000000000000000
R10 = fffffffffffffffc   R26 = c0000000006a4968
R11 = c000000000532d00   R27 = c0000000006a00b0
R12 = c00000000002a550   R28 = c0000000ee143c98
R13 = c000000000532d00   R29 = c000000000f35b80
R14 = 0000000000000000   R30 = c0000000005b4190
R15 = c0000000004050a0   R31 = c0000000005cf910
pc  = c00000000006c090 .migration_thread+0x64/0x31c
lr  = c00000000008e348 .kthread+0x78/0xc4
msr = 8000000000029032   cr  = 28000024
ctr = c00000000006c02c   xer = 0000000020000004   trap =  700

(gdb) p kthread
$1 = {int (void *)} 0xc00000000008e2d0 <kthread>
(gdb) p/x 0xc00000000008e2d0+0x78
$2 = 0xc00000000008e348
(gdb) l *0xc00000000008e348
0xc00000000008e348 is in kthread (kernel/kthread.c:78).
73              __set_current_state(TASK_UNINTERRUPTIBLE);
74              complete(&create->started);
75              schedule();
76
77              if (!kthread_should_stop())
78                      ret = threadfn(data);
79
80              /* It might have exited on its own, w/o kthread_stop.  Check. */
81              if (kthread_should_stop()) {
82                      kthread_stop_info.err = ret;


-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

[powerpc crash] Re: Linux 2.6.24-rc7 kernel BUG at kernel/sched.c:5156!

[Ingo Molnar]

* Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:

> Hi,
> 
> When booting the 2.6.24-rc7 kernel on the powerpc, kernel bug at
> kernel.sched.c is triggered
> 
> [    0.000000] Kernel command line: ro console=hvc0 rhgb quiet root=LABEL=/ 
> [    0.149567] BUG: scheduling while atomic: kthreadd/2/0x0006f34c
> [    0.149655] BUG: scheduling while atomic: kthreadd/3/0xbe0d8168
> [    0.149714] ------------[ cut here ]------------
> [    0.149722] kernel BUG at kernel/sched.c:5156!

hm, that looks pretty nasty. Wondering why the atomic check did not 
produce a stacktrace. By the time we get to the migration thread's code 
it's probably late and we just get to see the effects of data 
corruption.

	Ingo

Re: Linux 2.6.24-rc7

[Alejandro Riveira Fernández]

El Sun, 6 Jan 2008 14:19:16 -0800 (PST)
Linus Torvalds <torvalds@linux-foundation.org> escribió:

> 
> It's been two weeks since rc6, but let's face it, with xmas and new years 
> (and birthdays) in between, there hasn't actually been a lot of working 
> days, and the incremental patch from -rc6 is about half the size of the 
> one from rc5->rc6.
> 
> And I'll be charitable and claim it's because it's all stabilizing, and 
> not because we've all been in a drunken stupor over the holidays.
> 
> The shortlog (appended below) is short and fairly informative. It's all 
> really just a lot of rather small changes. The diffstat shows a lot of 
> one- and two-liners, with just a few drivers (and the Cell platform) 
> getting a bit more attention, and the SLUB support of /proc/slabinfo 
> showing up as a blip.
> 
> Both git trees and tar-balls/patches pushed out, should be mirroring out 
> within minutes. So there are no excuses to not try it out, and see if your 
> favorite regression has been fixed.
> 
> 		Linus
> 

   MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x10508): Section mismatch: reference to .init.text:fork_idle (between 'do_fork_idle' and 'lapic_timer_broadcast')
WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')
WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')

 Config:
 
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6
# Sun Jan  6 17:11:46 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PREEMPT_NOTIFIERS=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_HPET_TIMER=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SUSPEND_SMP_POSSIBLE=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION_SMP_POSSIBLE=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_BRIDGE_NETFILTER is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RR=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_RCSIMPLE=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
# CONFIG_NET_9P_DEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIL24=m
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=m
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
CONFIG_FIXED_MII_1000_FDX=y
CONFIG_FIXED_MII_AMNT=1
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
CONFIG_ULI526X=m
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_RTL8187=m
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_RFKILL=y
# CONFIG_RT2400PCI is not set
CONFIG_RT2500PCI=m
CONFIG_RT2500PCI_RFKILL=y
# CONFIG_RT61PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
# CONFIG_RT2X00_DEBUG is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not set
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp850"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ABLKCIPHER=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

smpboot_64 section mismatch warning

[Sam Ravnborg]

On Mon, Jan 07, 2008 at 04:53:44PM +0100, Alejandro Riveira Fernández wrote:
> 
>    MODPOST vmlinux.o
> WARNING: vmlinux.o(.text+0x10508): Section mismatch: reference to .init.text:fork_idle (between 'do_fork_idle' and 'lapic_timer_broadcast')

Caused by following commit:
commit 65f27f38446e1976cc98fd3004b110fedcddd189
Author: David Howells <dhowells@redhat.com>
Date:   Wed Nov 22 14:55:48 2006 +0000

    WorkStruct: Pass the work_struct pointer instead of context data


David - will you look into this?

	Sam

Re: smpboot_64 section mismatch warning

[David Howells]

Sam Ravnborg <sam@ravnborg.org> wrote:

> David - will you look into this?

Do you have a config?

David

Re: smpboot_64 section mismatch warning

[Alejandro Riveira Fernández]

El Mon, 07 Jan 2008 23:27:35 +0000
David Howells <dhowells@redhat.com> escribió:

> Sam Ravnborg <sam@ravnborg.org> wrote:
> 
> > David - will you look into this?
> 
> Do you have a config?
> 
> David

 My config follows:
 
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6
# Sun Jan  6 17:11:46 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PREEMPT_NOTIFIERS=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_HPET_TIMER=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SUSPEND_SMP_POSSIBLE=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION_SMP_POSSIBLE=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_BRIDGE_NETFILTER is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RR=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_RCSIMPLE=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
# CONFIG_NET_9P_DEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIL24=m
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=m
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
CONFIG_FIXED_MII_1000_FDX=y
CONFIG_FIXED_MII_AMNT=1
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
CONFIG_ULI526X=m
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_RTL8187=m
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_RFKILL=y
# CONFIG_RT2400PCI is not set
CONFIG_RT2500PCI=m
CONFIG_RT2500PCI_RFKILL=y
# CONFIG_RT61PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
# CONFIG_RT2X00_DEBUG is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not set
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp850"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ABLKCIPHER=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

Re: smpboot_64 section mismatch warning

[David Howells]

	[arch/x86/kernel/smpboot_64.c]
	void do_fork_idle(struct work_struct *work)

Needs labelling with __cpuinit.

David

section mismatch warning in head_64.S

[Sam Ravnborg]

On Mon, Jan 07, 2008 at 04:53:44PM +0100, Alejandro Riveira Fernández wrote:
> 
>    MODPOST vmlinux.o
> WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')
> WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')

Caused by following patch:
commit 1ab60e0f72f71ec54831e525a3e1154f1c092408
Author: Vivek Goyal <vgoyal@in.ibm.com>
Date:   Wed May 2 19:27:07 2007 +0200

    [PATCH] x86-64: Relocatable Kernel Support

Vivek - will you look after this?

	Sam

Re: section mismatch warning in head_64.S

[Alejandro Riveira Fernández]

El Mon, 7 Jan 2008 17:31:39 +0100
Sam Ravnborg <sam@ravnborg.org> escribió:

> On Mon, Jan 07, 2008 at 04:53:44PM +0100, Alejandro Riveira Fernández wrote:
> > 
> >    MODPOST vmlinux.o
> > WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')
> > WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')

 Still seeing this as of v2.6.24-rc7-205-g5d5d800

 (5d5d80001df3fbd06bd2b8893b6e3847e38a12d6)


> 
> Caused by following patch:
> commit 1ab60e0f72f71ec54831e525a3e1154f1c092408
> Author: Vivek Goyal <vgoyal@in.ibm.com>
> Date:   Wed May 2 19:27:07 2007 +0200
> 
>     [PATCH] x86-64: Relocatable Kernel Support
> 
> Vivek - will you look after this?
> 
> 	Sam

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Sun Jan 13 19:31:41 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PREEMPT_NOTIFIERS=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_HPET_TIMER=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SUSPEND_SMP_POSSIBLE=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION_SMP_POSSIBLE=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_BRIDGE_NETFILTER is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RR=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_RCSIMPLE=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
# CONFIG_NET_9P_DEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIL24=m
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=m
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
CONFIG_FIXED_MII_1000_FDX=y
CONFIG_FIXED_MII_AMNT=1
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
CONFIG_ULI526X=m
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_RTL8187=m
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_RFKILL=y
# CONFIG_RT2400PCI is not set
CONFIG_RT2500PCI=m
CONFIG_RT2500PCI_RFKILL=y
# CONFIG_RT61PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
# CONFIG_RT2X00_DEBUG is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not set
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp850"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ABLKCIPHER=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

Re: Linux 2.6.24-rc7

[Alejandro Riveira Fernández]

El Sun, 6 Jan 2008 14:19:16 -0800 (PST)
Linus Torvalds <torvalds@linux-foundation.org> escribi=C3=B3:

>=20
> It's been two weeks since rc6, but let's face it, with xmas and new y=
ears=20
> (and birthdays) in between, there hasn't actually been a lot of worki=
ng=20
> days, and the incremental patch from -rc6 is about half the size of t=
he=20
> one from rc5->rc6.
>=20
> And I'll be charitable and claim it's because it's all stabilizing, a=
nd=20
> not because we've all been in a drunken stupor over the holidays.
>=20
> The shortlog (appended below) is short and fairly informative. It's a=
ll=20
> really just a lot of rather small changes. The diffstat shows a lot o=
f=20
> one- and two-liners, with just a few drivers (and the Cell platform)=20
> getting a bit more attention, and the SLUB support of /proc/slabinfo=20
> showing up as a blip.
>=20
> Both git trees and tar-balls/patches pushed out, should be mirroring =
out=20
> within minutes. So there are no excuses to not try it out, and see if=
 your=20
> favorite regression has been fixed.
>=20
> 		Linus
>=20
  Booted with it and I see=20

 [   37.043998]                                                        =
                                                      =20
[   37.043999] Call Trace:                                             =
                                                     =20
[   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x30     =
                                                     =20
[   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc7e/0xd=
30                                                   =20
[   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50           =
                                                     =20
[   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_handle=
r+0xbb/0x120                                         =20
[   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0          =
                                                     =20
[   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0            =
                                                     =20
[   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30            =
                                                     =20
[   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90              =
                                                     =20
[   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0                =
                                                     =20
[   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100                 =
                                                     =20
[   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40             =
                                                     =20
[   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa             =
                                                     =20
[   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x40     =
                                                     =20
[   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0                =
                                                     =20
[   37.044146]                                                         =
                                                     =20

 If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
=20
Linux Varda 2.6.24-rc7 #3 SMP PREEMPT Mon Jan 7 14:47:13 CET 2008 x86_6=
4 GNU/Linux
=20
Gnu C                  4.1.3
Gnu make               3.81
binutils               2.18
util-linux             2.13
mount                  2.13
module-init-tools      3.3-pre2
e2fsprogs              1.40.2
jfsutils               1.1.11
reiserfsprogs          3.6.19
pcmciautils            014
PPP                    2.4.4
Linux C Library        2.6.1
Dynamic linker (ldd)   2.6.1
Procps                 3.2.7
Net-tools              1.60
Kbd                    [opcion...][archivo
Console-tools          0.2.3
Sh-utils               5.97
udev                   113
wireless-tools         29
Modules Loaded         af_packet binfmt_misc rfcomm l2cap bluetooth ipv=
6 powernow_k8 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq=
_ondemand freq_table cpufreq_conservative nf_conntrack_ftp nf_conntrack=
_irc xt_tcpudp ipt_ULOG xt_limit xt_state iptable_filter nf_conntrack_i=
pv4 nf_conntrack ip_tables x_tables kvm_amd kvm w83627ehf hwmon_vid lp =
arc4 ecb blkcipher cryptomgr snd_hda_intel crypto_algapi snd_pcm_oss sn=
d_mixer_oss snd_pcm rt2500pci rt2x00pci rt2x00lib snd_seq_dummy rfkill =
snd_mpu401 input_polldev snd_seq_oss snd_mpu401_uart crc_itu_t snd_seq_=
midi snd_seq_midi_event mac80211 8250_pnp snd_rawmidi snd_seq parport_p=
c parport 8250 serial_core usbhid cfg80211 snd_timer snd_seq_device rtc=
 evdev pcspkr ff_memless k8temp hwmon usblp snd eeprom_93cx6 i2c_ali153=
5 i2c_ali15x3 soundcore i2c_core snd_page_alloc button uli526x floppy s=
r_mod cdrom sg ehci_hcd ohci_hcd pata_acpi ata_generic r8169 usbcore un=
ix thermal processor fan fuse



 #
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6
# Sun Jan  6 17:11:46 2008
#
CONFIG_64BIT=3Dy
# CONFIG_X86_32 is not set
CONFIG_X86_64=3Dy
CONFIG_X86=3Dy
CONFIG_GENERIC_TIME=3Dy
CONFIG_GENERIC_CMOS_UPDATE=3Dy
CONFIG_CLOCKSOURCE_WATCHDOG=3Dy
CONFIG_GENERIC_CLOCKEVENTS=3Dy
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=3Dy
CONFIG_LOCKDEP_SUPPORT=3Dy
CONFIG_STACKTRACE_SUPPORT=3Dy
CONFIG_SEMAPHORE_SLEEPERS=3Dy
CONFIG_MMU=3Dy
CONFIG_ZONE_DMA=3Dy
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=3Dy
CONFIG_GENERIC_IOMAP=3Dy
CONFIG_GENERIC_BUG=3Dy
CONFIG_GENERIC_HWEIGHT=3Dy
CONFIG_ARCH_MAY_HAVE_PC_FDC=3Dy
CONFIG_DMI=3Dy
CONFIG_RWSEM_GENERIC_SPINLOCK=3Dy
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=3Dy
CONFIG_GENERIC_TIME_VSYSCALL=3Dy
CONFIG_ARCH_SUPPORTS_OPROFILE=3Dy
CONFIG_ZONE_DMA32=3Dy
CONFIG_ARCH_POPULATES_NODE_MAP=3Dy
CONFIG_AUDIT_ARCH=3Dy
CONFIG_GENERIC_HARDIRQS=3Dy
CONFIG_GENERIC_IRQ_PROBE=3Dy
CONFIG_GENERIC_PENDING_IRQ=3Dy
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST=3D"/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=3Dy
CONFIG_LOCK_KERNEL=3Dy
CONFIG_INIT_ENV_ARG_LIMIT=3D32
CONFIG_LOCALVERSION=3D""
CONFIG_LOCALVERSION_AUTO=3Dy
CONFIG_SWAP=3Dy
CONFIG_SYSVIPC=3Dy
CONFIG_SYSVIPC_SYSCTL=3Dy
CONFIG_POSIX_MQUEUE=3Dy
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=3Dy
CONFIG_IKCONFIG_PROC=3Dy
CONFIG_LOG_BUF_SHIFT=3D15
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=3Dy
CONFIG_FAIR_USER_SCHED=3Dy
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=3Dy
CONFIG_BLK_DEV_INITRD=3Dy
CONFIG_INITRAMFS_SOURCE=3D""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=3Dy
# CONFIG_EMBEDDED is not set
CONFIG_UID16=3Dy
CONFIG_SYSCTL_SYSCALL=3Dy
CONFIG_KALLSYMS=3Dy
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=3Dy
CONFIG_PRINTK=3Dy
CONFIG_BUG=3Dy
CONFIG_ELF_CORE=3Dy
CONFIG_BASE_FULL=3Dy
CONFIG_FUTEX=3Dy
CONFIG_ANON_INODES=3Dy
CONFIG_EPOLL=3Dy
CONFIG_SIGNALFD=3Dy
CONFIG_EVENTFD=3Dy
CONFIG_SHMEM=3Dy
CONFIG_VM_EVENT_COUNTERS=3Dy
CONFIG_SLUB_DEBUG=3Dy
# CONFIG_SLAB is not set
CONFIG_SLUB=3Dy
# CONFIG_SLOB is not set
CONFIG_SLABINFO=3Dy
CONFIG_RT_MUTEXES=3Dy
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=3D0
CONFIG_MODULES=3Dy
CONFIG_MODULE_UNLOAD=3Dy
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=3Dy
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=3Dy
CONFIG_STOP_MACHINE=3Dy
CONFIG_BLOCK=3Dy
CONFIG_BLK_DEV_IO_TRACE=3Dy
CONFIG_BLK_DEV_BSG=3Dy
CONFIG_BLOCK_COMPAT=3Dy

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=3Dy
CONFIG_IOSCHED_AS=3Dy
CONFIG_IOSCHED_DEADLINE=3Dm
CONFIG_IOSCHED_CFQ=3Dm
CONFIG_DEFAULT_AS=3Dy
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED=3D"anticipatory"
CONFIG_PREEMPT_NOTIFIERS=3Dy

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=3Dy
CONFIG_NO_HZ=3Dy
CONFIG_HIGH_RES_TIMERS=3Dy
CONFIG_GENERIC_CLOCKEVENTS_BUILD=3Dy
CONFIG_SMP=3Dy
CONFIG_X86_PC=3Dy
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=3Dy
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=3D64
CONFIG_X86_INTERNODE_CACHE_BYTES=3D64
CONFIG_X86_CMPXCHG=3Dy
CONFIG_X86_L1_CACHE_SHIFT=3D6
CONFIG_X86_GOOD_APIC=3Dy
CONFIG_X86_INTEL_USERCOPY=3Dy
CONFIG_X86_USE_PPRO_CHECKSUM=3Dy
CONFIG_X86_TSC=3Dy
CONFIG_X86_MINIMUM_CPU_FAMILY=3D64
CONFIG_HPET_TIMER=3Dy
CONFIG_GART_IOMMU=3Dy
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=3Dy
CONFIG_NR_CPUS=3D2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=3Dy
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=3Dy
CONFIG_PREEMPT_BKL=3Dy
CONFIG_X86_LOCAL_APIC=3Dy
CONFIG_X86_IO_APIC=3Dy
CONFIG_X86_MCE=3Dy
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=3Dy
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=3Dy
CONFIG_X86_CPUID=3Dy
# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=3Dy
CONFIG_ARCH_SPARSEMEM_ENABLE=3Dy
CONFIG_SELECT_MEMORY_MODEL=3Dy
CONFIG_FLATMEM_MANUAL=3Dy
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=3Dy
CONFIG_FLAT_NODE_MEM_MAP=3Dy
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=3Dy
CONFIG_SPLIT_PTLOCK_CPUS=3D4
CONFIG_RESOURCES_64BIT=3Dy
CONFIG_ZONE_DMA_FLAG=3D1
CONFIG_BOUNCE=3Dy
CONFIG_VIRT_TO_BUS=3Dy
CONFIG_MTRR=3Dy
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=3Dy
CONFIG_HZ=3D1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=3D0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=3D0x200000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=3Dy

#
# Power management options
#
CONFIG_PM=3Dy
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SUSPEND_SMP_POSSIBLE=3Dy
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION_SMP_POSSIBLE=3Dy
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=3Dy
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=3Dm
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=3Dm
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=3Dm
CONFIG_ACPI_THERMAL=3Dm
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=3D0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=3Dy
CONFIG_ACPI_POWER=3Dy
CONFIG_ACPI_SYSTEM=3Dy
CONFIG_X86_PM_TIMER=3Dy
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=3Dy
CONFIG_CPU_FREQ_TABLE=3Dm
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=3Dm
CONFIG_CPU_FREQ_STAT_DETAILS=3Dy
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=3Dy
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=3Dy
CONFIG_CPU_FREQ_GOV_POWERSAVE=3Dm
CONFIG_CPU_FREQ_GOV_USERSPACE=3Dm
CONFIG_CPU_FREQ_GOV_ONDEMAND=3Dm
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=3Dm

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=3Dm
CONFIG_X86_POWERNOW_K8=3Dm
CONFIG_X86_POWERNOW_K8_ACPI=3Dy
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=3Dy
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=3Dy
CONFIG_PCI_DIRECT=3Dy
CONFIG_PCI_MMCONFIG=3Dy
CONFIG_PCI_DOMAINS=3Dy
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=3Dy
CONFIG_PCIEAER=3Dy
CONFIG_ARCH_SUPPORTS_MSI=3Dy
CONFIG_PCI_MSI=3Dy
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=3Dy
CONFIG_ISA_DMA_API=3Dy
CONFIG_K8_NB=3Dy
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=3Dy
CONFIG_BINFMT_MISC=3Dm
CONFIG_IA32_EMULATION=3Dy
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=3Dy
CONFIG_COMPAT_FOR_U64_ALIGNMENT=3Dy
CONFIG_SYSVIPC_COMPAT=3Dy

#
# Networking
#
CONFIG_NET=3Dy

#
# Networking options
#
CONFIG_PACKET=3Dm
CONFIG_PACKET_MMAP=3Dy
CONFIG_UNIX=3Dm
CONFIG_XFRM=3Dy
CONFIG_XFRM_USER=3Dm
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=3Dm
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=3Dy
CONFIG_IP_MULTICAST=3Dy
CONFIG_IP_ADVANCED_ROUTER=3Dy
CONFIG_ASK_IP_FIB_HASH=3Dy
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=3Dy
CONFIG_IP_MULTIPLE_TABLES=3Dy
CONFIG_IP_ROUTE_MULTIPATH=3Dy
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=3Dy
CONFIG_INET_AH=3Dm
CONFIG_INET_ESP=3Dm
CONFIG_INET_IPCOMP=3Dm
CONFIG_INET_XFRM_TUNNEL=3Dm
CONFIG_INET_TUNNEL=3Dm
CONFIG_INET_XFRM_MODE_TRANSPORT=3Dm
CONFIG_INET_XFRM_MODE_TUNNEL=3Dm
CONFIG_INET_XFRM_MODE_BEET=3Dm
CONFIG_INET_LRO=3Dy
CONFIG_INET_DIAG=3Dm
CONFIG_INET_TCP_DIAG=3Dm
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=3Dy
CONFIG_DEFAULT_TCP_CONG=3D"cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=3Dm
CONFIG_IPV6_PRIVACY=3Dy
CONFIG_IPV6_ROUTER_PREF=3Dy
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=3Dm
CONFIG_INET6_ESP=3Dm
CONFIG_INET6_IPCOMP=3Dm
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=3Dm
CONFIG_INET6_TUNNEL=3Dm
CONFIG_INET6_XFRM_MODE_TRANSPORT=3Dm
CONFIG_INET6_XFRM_MODE_TUNNEL=3Dm
CONFIG_INET6_XFRM_MODE_BEET=3Dm
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=3Dm
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=3Dy
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_BRIDGE_NETFILTER is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=3Dm
CONFIG_NETFILTER_NETLINK_QUEUE=3Dm
CONFIG_NETFILTER_NETLINK_LOG=3Dm
CONFIG_NF_CONNTRACK_ENABLED=3Dm
CONFIG_NF_CONNTRACK=3Dm
CONFIG_NF_CT_ACCT=3Dy
CONFIG_NF_CONNTRACK_MARK=3Dy
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_SCTP=3Dm
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=3Dm
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=3Dm
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=3Dm
CONFIG_NF_CONNTRACK_TFTP=3Dm
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=3Dm
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=3Dm
CONFIG_NETFILTER_XT_TARGET_CONNMARK=3Dm
CONFIG_NETFILTER_XT_TARGET_DSCP=3Dm
CONFIG_NETFILTER_XT_TARGET_MARK=3Dm
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=3Dm
CONFIG_NETFILTER_XT_TARGET_NFLOG=3Dm
CONFIG_NETFILTER_XT_TARGET_NOTRACK=3Dm
CONFIG_NETFILTER_XT_TARGET_TRACE=3Dm
CONFIG_NETFILTER_XT_TARGET_TCPMSS=3Dm
CONFIG_NETFILTER_XT_MATCH_COMMENT=3Dm
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=3Dm
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=3Dm
CONFIG_NETFILTER_XT_MATCH_CONNMARK=3Dm
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=3Dm
CONFIG_NETFILTER_XT_MATCH_DCCP=3Dm
CONFIG_NETFILTER_XT_MATCH_DSCP=3Dm
CONFIG_NETFILTER_XT_MATCH_ESP=3Dm
CONFIG_NETFILTER_XT_MATCH_HELPER=3Dm
CONFIG_NETFILTER_XT_MATCH_LENGTH=3Dm
CONFIG_NETFILTER_XT_MATCH_LIMIT=3Dm
CONFIG_NETFILTER_XT_MATCH_MAC=3Dm
CONFIG_NETFILTER_XT_MATCH_MARK=3Dm
CONFIG_NETFILTER_XT_MATCH_POLICY=3Dm
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=3Dm
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=3Dm
CONFIG_NETFILTER_XT_MATCH_QUOTA=3Dm
CONFIG_NETFILTER_XT_MATCH_REALM=3Dm
CONFIG_NETFILTER_XT_MATCH_SCTP=3Dm
CONFIG_NETFILTER_XT_MATCH_STATE=3Dm
CONFIG_NETFILTER_XT_MATCH_STATISTIC=3Dm
CONFIG_NETFILTER_XT_MATCH_STRING=3Dm
CONFIG_NETFILTER_XT_MATCH_TCPMSS=3Dm
CONFIG_NETFILTER_XT_MATCH_TIME=3Dm
CONFIG_NETFILTER_XT_MATCH_U32=3Dm
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=3Dm

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=3Dm
CONFIG_NF_CONNTRACK_PROC_COMPAT=3Dy
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=3Dm
CONFIG_IP_NF_MATCH_IPRANGE=3Dm
CONFIG_IP_NF_MATCH_TOS=3Dm
CONFIG_IP_NF_MATCH_RECENT=3Dm
CONFIG_IP_NF_MATCH_ECN=3Dm
CONFIG_IP_NF_MATCH_AH=3Dm
CONFIG_IP_NF_MATCH_TTL=3Dm
CONFIG_IP_NF_MATCH_OWNER=3Dm
CONFIG_IP_NF_MATCH_ADDRTYPE=3Dm
CONFIG_IP_NF_FILTER=3Dm
CONFIG_IP_NF_TARGET_REJECT=3Dm
CONFIG_IP_NF_TARGET_LOG=3Dm
CONFIG_IP_NF_TARGET_ULOG=3Dm
CONFIG_NF_NAT=3Dm
CONFIG_NF_NAT_NEEDED=3Dy
CONFIG_IP_NF_TARGET_MASQUERADE=3Dm
CONFIG_IP_NF_TARGET_REDIRECT=3Dm
CONFIG_IP_NF_TARGET_NETMAP=3Dm
CONFIG_IP_NF_TARGET_SAME=3Dm
CONFIG_NF_NAT_SNMP_BASIC=3Dm
CONFIG_NF_NAT_FTP=3Dm
CONFIG_NF_NAT_IRC=3Dm
CONFIG_NF_NAT_TFTP=3Dm
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=3Dm
CONFIG_IP_NF_MANGLE=3Dm
CONFIG_IP_NF_TARGET_TOS=3Dm
CONFIG_IP_NF_TARGET_ECN=3Dm
CONFIG_IP_NF_TARGET_TTL=3Dm
CONFIG_IP_NF_TARGET_CLUSTERIP=3Dm
CONFIG_IP_NF_RAW=3Dm
CONFIG_IP_NF_ARPTABLES=3Dm
CONFIG_IP_NF_ARPFILTER=3Dm
CONFIG_IP_NF_ARP_MANGLE=3Dm

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=3Dm
CONFIG_IP6_NF_QUEUE=3Dm
CONFIG_IP6_NF_IPTABLES=3Dm
CONFIG_IP6_NF_MATCH_RT=3Dm
CONFIG_IP6_NF_MATCH_OPTS=3Dm
CONFIG_IP6_NF_MATCH_FRAG=3Dm
CONFIG_IP6_NF_MATCH_HL=3Dm
CONFIG_IP6_NF_MATCH_OWNER=3Dm
CONFIG_IP6_NF_MATCH_IPV6HEADER=3Dm
CONFIG_IP6_NF_MATCH_AH=3Dm
CONFIG_IP6_NF_MATCH_MH=3Dm
CONFIG_IP6_NF_MATCH_EUI64=3Dm
CONFIG_IP6_NF_FILTER=3Dm
CONFIG_IP6_NF_TARGET_LOG=3Dm
CONFIG_IP6_NF_TARGET_REJECT=3Dm
CONFIG_IP6_NF_MANGLE=3Dm
CONFIG_IP6_NF_TARGET_HL=3Dm
CONFIG_IP6_NF_RAW=3Dm

#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=3Dm
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=3Dy
# CONFIG_TIPC is not set
CONFIG_ATM=3Dm
CONFIG_ATM_CLIP=3Dm
CONFIG_ATM_CLIP_NO_ICMP=3Dy
CONFIG_ATM_LANE=3Dm
CONFIG_ATM_MPOA=3Dm
CONFIG_ATM_BR2684=3Dm
CONFIG_ATM_BR2684_IPFILTER=3Dy
CONFIG_BRIDGE=3Dm
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=3Dm
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=3Dy

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=3Dm
CONFIG_NET_SCH_HTB=3Dm
CONFIG_NET_SCH_HFSC=3Dm
CONFIG_NET_SCH_ATM=3Dm
CONFIG_NET_SCH_PRIO=3Dm
CONFIG_NET_SCH_RR=3Dm
CONFIG_NET_SCH_RED=3Dm
CONFIG_NET_SCH_SFQ=3Dm
CONFIG_NET_SCH_TEQL=3Dm
CONFIG_NET_SCH_TBF=3Dm
CONFIG_NET_SCH_GRED=3Dm
CONFIG_NET_SCH_DSMARK=3Dm
CONFIG_NET_SCH_NETEM=3Dm
CONFIG_NET_SCH_INGRESS=3Dm

#
# Classification
#
CONFIG_NET_CLS=3Dy
CONFIG_NET_CLS_BASIC=3Dm
CONFIG_NET_CLS_TCINDEX=3Dm
CONFIG_NET_CLS_ROUTE4=3Dm
CONFIG_NET_CLS_ROUTE=3Dy
CONFIG_NET_CLS_FW=3Dm
CONFIG_NET_CLS_U32=3Dm
CONFIG_CLS_U32_PERF=3Dy
CONFIG_CLS_U32_MARK=3Dy
CONFIG_NET_CLS_RSVP=3Dm
CONFIG_NET_CLS_RSVP6=3Dm
CONFIG_NET_EMATCH=3Dy
CONFIG_NET_EMATCH_STACK=3D32
CONFIG_NET_EMATCH_CMP=3Dm
CONFIG_NET_EMATCH_NBYTE=3Dm
CONFIG_NET_EMATCH_U32=3Dm
CONFIG_NET_EMATCH_META=3Dm
CONFIG_NET_EMATCH_TEXT=3Dm
CONFIG_NET_CLS_ACT=3Dy
CONFIG_NET_ACT_POLICE=3Dm
CONFIG_NET_ACT_GACT=3Dm
CONFIG_GACT_PROB=3Dy
CONFIG_NET_ACT_MIRRED=3Dm
CONFIG_NET_ACT_IPT=3Dm
CONFIG_NET_ACT_NAT=3Dm
CONFIG_NET_ACT_PEDIT=3Dm
CONFIG_NET_ACT_SIMP=3Dm
# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_CLS_IND=3Dy
CONFIG_NET_SCH_FIFO=3Dy

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=3Dm
CONFIG_BT_L2CAP=3Dm
CONFIG_BT_SCO=3Dm
CONFIG_BT_RFCOMM=3Dm
CONFIG_BT_RFCOMM_TTY=3Dy
CONFIG_BT_BNEP=3Dm
CONFIG_BT_BNEP_MC_FILTER=3Dy
CONFIG_BT_BNEP_PROTO_FILTER=3Dy
CONFIG_BT_HIDP=3Dm

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=3Dm
CONFIG_BT_HCIUSB_SCO=3Dy
CONFIG_BT_HCIUART=3Dm
CONFIG_BT_HCIUART_H4=3Dy
CONFIG_BT_HCIUART_BCSP=3Dy
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=3Dm
CONFIG_BT_HCIBPA10X=3Dm
CONFIG_BT_HCIBFUSB=3Dm
CONFIG_BT_HCIVHCI=3Dm
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=3Dy

#
# Wireless
#
CONFIG_CFG80211=3Dm
CONFIG_NL80211=3Dy
CONFIG_WIRELESS_EXT=3Dy
CONFIG_MAC80211=3Dm
CONFIG_MAC80211_RCSIMPLE=3Dy
CONFIG_MAC80211_LEDS=3Dy
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=3Dy
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=3Dm
CONFIG_IEEE80211_CRYPT_CCMP=3Dm
CONFIG_IEEE80211_CRYPT_TKIP=3Dm
CONFIG_IEEE80211_SOFTMAC=3Dm
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=3Dm
CONFIG_RFKILL_INPUT=3Dm
CONFIG_RFKILL_LEDS=3Dy
CONFIG_NET_9P=3Dm
CONFIG_NET_9P_FD=3Dm
# CONFIG_NET_9P_DEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=3D"/sbin/hotplug"
CONFIG_STANDALONE=3Dy
CONFIG_PREVENT_FIRMWARE_BUILD=3Dy
CONFIG_FW_LOADER=3Dy
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=3Dm
# CONFIG_MTD is not set
CONFIG_PARPORT=3Dm
CONFIG_PARPORT_PC=3Dm
CONFIG_PARPORT_SERIAL=3Dm
CONFIG_PARPORT_PC_FIFO=3Dy
CONFIG_PARPORT_PC_SUPERIO=3Dy
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=3Dy
CONFIG_PNP=3Dy
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=3Dy
CONFIG_BLK_DEV=3Dy
CONFIG_BLK_DEV_FD=3Dm
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=3Dm
CONFIG_BLK_DEV_CRYPTOLOOP=3Dm
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=3Dy
CONFIG_BLK_DEV_RAM_COUNT=3D16
CONFIG_BLK_DEV_RAM_SIZE=3D8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=3D1024
CONFIG_CDROM_PKTCDVD=3Dm
CONFIG_CDROM_PKTCDVD_BUFFERS=3D8
CONFIG_CDROM_PKTCDVD_WCACHE=3Dy
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_EEPROM_93CX6=3Dm
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=3Dy
CONFIG_SCSI_DMA=3Dy
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=3Dy
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=3Dm
CONFIG_BLK_DEV_SR_VENDOR=3Dy
CONFIG_CHR_DEV_SG=3Dm
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=3Dm

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=3Dy
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=3Dy
CONFIG_SATA_AHCI=3Dy
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIL24=3Dm
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=3Dm
CONFIG_SATA_VIA=3Dm
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_PATA_ACPI=3Dm
CONFIG_PATA_ALI=3Dy
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=3Dm
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=3Dm
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
CONFIG_PATA_NETCELL=3Dm
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=3Dm
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=3Dm
CONFIG_FIREWIRE_OHCI=3Dm
CONFIG_FIREWIRE_SBP2=3Dm
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=3Dy
CONFIG_NETDEVICES_MULTIQUEUE=3Dy
# CONFIG_IFB is not set
CONFIG_DUMMY=3Dm
CONFIG_BONDING=3Dm
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=3Dm
CONFIG_VETH=3Dm
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=3Dm

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=3Dm
CONFIG_DAVICOM_PHY=3Dm
CONFIG_QSEMI_PHY=3Dm
CONFIG_LXT_PHY=3Dm
CONFIG_CICADA_PHY=3Dm
CONFIG_VITESSE_PHY=3Dm
CONFIG_SMSC_PHY=3Dm
CONFIG_BROADCOM_PHY=3Dm
CONFIG_ICPLUS_PHY=3Dm
CONFIG_FIXED_PHY=3Dm
CONFIG_FIXED_MII_10_FDX=3Dy
CONFIG_FIXED_MII_100_FDX=3Dy
CONFIG_FIXED_MII_1000_FDX=3Dy
CONFIG_FIXED_MII_AMNT=3D1
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=3Dy
CONFIG_MII=3Dm
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=3Dy
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
CONFIG_ULI526X=3Dm
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=3Dy
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=3Dm
CONFIG_R8169_NAPI=3Dy
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=3Dy
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=3Dm
CONFIG_RTL8187=3Dm
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_ZD1211RW=3Dm
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=3Dm
CONFIG_RT2X00_LIB=3Dm
CONFIG_RT2X00_LIB_PCI=3Dm
CONFIG_RT2X00_LIB_USB=3Dm
CONFIG_RT2X00_LIB_FIRMWARE=3Dy
CONFIG_RT2X00_LIB_RFKILL=3Dy
# CONFIG_RT2400PCI is not set
CONFIG_RT2500PCI=3Dm
CONFIG_RT2500PCI_RFKILL=3Dy
# CONFIG_RT61PCI is not set
CONFIG_RT2500USB=3Dm
CONFIG_RT73USB=3Dm
# CONFIG_RT2X00_DEBUG is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=3Dm
CONFIG_PPP_MULTILINK=3Dy
CONFIG_PPP_FILTER=3Dy
CONFIG_PPP_ASYNC=3Dm
CONFIG_PPP_SYNC_TTY=3Dm
CONFIG_PPP_DEFLATE=3Dm
CONFIG_PPP_BSDCOMP=3Dm
CONFIG_PPP_MPPE=3Dm
CONFIG_PPPOE=3Dm
CONFIG_PPPOATM=3Dm
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=3Dm
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=3Dm
CONFIG_NETCONSOLE_DYNAMIC=3Dy
CONFIG_NETPOLL=3Dy
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=3Dy
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=3Dy
CONFIG_INPUT_FF_MEMLESS=3Dm
CONFIG_INPUT_POLLDEV=3Dm

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=3Dy
CONFIG_INPUT_MOUSEDEV_PSAUX=3Dy
CONFIG_INPUT_MOUSEDEV_SCREEN_X=3D1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=3D768
CONFIG_INPUT_JOYDEV=3Dm
CONFIG_INPUT_EVDEV=3Dm
CONFIG_INPUT_EVBUG=3Dm

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=3Dy
CONFIG_KEYBOARD_ATKBD=3Dy
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=3Dm
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=3Dy
CONFIG_MOUSE_PS2=3Dy
CONFIG_MOUSE_PS2_ALPS=3Dy
CONFIG_MOUSE_PS2_LOGIPS2PP=3Dy
CONFIG_MOUSE_PS2_SYNAPTICS=3Dy
CONFIG_MOUSE_PS2_LIFEBOOK=3Dy
CONFIG_MOUSE_PS2_TRACKPOINT=3Dy
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=3Dy
CONFIG_JOYSTICK_ANALOG=3Dm
CONFIG_JOYSTICK_A3D=3Dm
CONFIG_JOYSTICK_ADI=3Dm
CONFIG_JOYSTICK_COBRA=3Dm
CONFIG_JOYSTICK_GF2K=3Dm
CONFIG_JOYSTICK_GRIP=3Dm
CONFIG_JOYSTICK_GRIP_MP=3Dm
CONFIG_JOYSTICK_GUILLEMOT=3Dm
CONFIG_JOYSTICK_INTERACT=3Dm
CONFIG_JOYSTICK_SIDEWINDER=3Dm
CONFIG_JOYSTICK_TMDC=3Dm
CONFIG_JOYSTICK_IFORCE=3Dm
CONFIG_JOYSTICK_IFORCE_USB=3Dy
CONFIG_JOYSTICK_IFORCE_232=3Dy
CONFIG_JOYSTICK_WARRIOR=3Dm
CONFIG_JOYSTICK_MAGELLAN=3Dm
CONFIG_JOYSTICK_SPACEORB=3Dm
CONFIG_JOYSTICK_SPACEBALL=3Dm
CONFIG_JOYSTICK_STINGER=3Dm
CONFIG_JOYSTICK_TWIDJOY=3Dm
CONFIG_JOYSTICK_DB9=3Dm
CONFIG_JOYSTICK_GAMECON=3Dm
CONFIG_JOYSTICK_TURBOGRAFX=3Dm
CONFIG_JOYSTICK_JOYDUMP=3Dm
CONFIG_JOYSTICK_XPAD=3Dm
CONFIG_JOYSTICK_XPAD_FF=3Dy
CONFIG_JOYSTICK_XPAD_LEDS=3Dy
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=3Dy
CONFIG_INPUT_PCSPKR=3Dm
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=3Dm

#
# Hardware I/O ports
#
CONFIG_SERIO=3Dy
CONFIG_SERIO_I8042=3Dy
CONFIG_SERIO_SERPORT=3Dm
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=3Dm
CONFIG_SERIO_LIBPS2=3Dy
CONFIG_SERIO_RAW=3Dm
CONFIG_GAMEPORT=3Dm
CONFIG_GAMEPORT_NS558=3Dm
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=3Dm
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=3Dy
CONFIG_VT_CONSOLE=3Dy
CONFIG_HW_CONSOLE=3Dy
CONFIG_VT_HW_CONSOLE_BINDING=3Dy
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=3Dm
CONFIG_FIX_EARLYCON_MEM=3Dy
CONFIG_SERIAL_8250_PCI=3Dm
CONFIG_SERIAL_8250_PNP=3Dm
CONFIG_SERIAL_8250_NR_UARTS=3D4
CONFIG_SERIAL_8250_RUNTIME_UARTS=3D4
CONFIG_SERIAL_8250_EXTENDED=3Dy
CONFIG_SERIAL_8250_MANY_PORTS=3Dy
CONFIG_SERIAL_8250_SHARE_IRQ=3Dy
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=3Dy

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=3Dm
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=3Dy
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=3Dm
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=3Dm
CONFIG_HW_RANDOM_INTEL=3Dm
CONFIG_HW_RANDOM_AMD=3Dm
CONFIG_NVRAM=3Dm
CONFIG_RTC=3Dm
CONFIG_GEN_RTC=3Dm
CONFIG_GEN_RTC_X=3Dy
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=3Dy
CONFIG_HPET_RTC_IRQ=3Dy
CONFIG_HPET_MMAP=3Dy
CONFIG_HANGCHECK_TIMER=3Dm
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=3Dy
CONFIG_I2C=3Dm
CONFIG_I2C_BOARDINFO=3Dy
CONFIG_I2C_CHARDEV=3Dm

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=3Dm
CONFIG_I2C_ALGOPCF=3Dm
CONFIG_I2C_ALGOPCA=3Dm

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=3Dm
CONFIG_I2C_ALI1563=3Dm
CONFIG_I2C_ALI15X3=3Dm
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_OCORES=3Dm
CONFIG_I2C_PARPORT=3Dm
CONFIG_I2C_PARPORT_LIGHT=3Dm
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=3Dm
CONFIG_HWMON_VID=3Dm
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_K8TEMP=3Dm
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=3Dm
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=3Dm
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=3Dy
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=3Dy
CONFIG_AGP_AMD64=3Dy
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=3Dm
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=3Dm
CONFIG_VIDEO_OUTPUT_CONTROL=3Dm
CONFIG_FB=3Dm
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=3Dm
CONFIG_FB_CFB_FILLRECT=3Dm
CONFIG_FB_CFB_COPYAREA=3Dm
CONFIG_FB_CFB_IMAGEBLIT=3Dm
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=3Dy
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=3Dy
CONFIG_FB_MODE_HELPERS=3Dy
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=3Dm
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=3Dm
CONFIG_FB_NVIDIA_I2C=3Dy
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=3Dy
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=3Dy
CONFIG_LCD_CLASS_DEVICE=3Dm
CONFIG_BACKLIGHT_CLASS_DEVICE=3Dm
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=3Dy
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=3Dy
CONFIG_DUMMY_CONSOLE=3Dy
CONFIG_FRAMEBUFFER_CONSOLE=3Dm
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=3Dy
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=3Dy
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=3Dy
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=3Dy
CONFIG_LOGO_LINUX_CLUT224=3Dy

#
# Sound
#
CONFIG_SOUND=3Dm

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=3Dm
CONFIG_SND_TIMER=3Dm
CONFIG_SND_PCM=3Dm
CONFIG_SND_HWDEP=3Dm
CONFIG_SND_RAWMIDI=3Dm
CONFIG_SND_SEQUENCER=3Dm
CONFIG_SND_SEQ_DUMMY=3Dm
CONFIG_SND_OSSEMUL=3Dy
CONFIG_SND_MIXER_OSS=3Dm
CONFIG_SND_PCM_OSS=3Dm
CONFIG_SND_PCM_OSS_PLUGINS=3Dy
CONFIG_SND_SEQUENCER_OSS=3Dy
CONFIG_SND_RTCTIMER=3Dm
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=3Dy
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=3Dy
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=3Dm
CONFIG_SND_OPL3_LIB=3Dm
CONFIG_SND_AC97_CODEC=3Dm
CONFIG_SND_DUMMY=3Dm
CONFIG_SND_VIRMIDI=3Dm
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=3Dm
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_SB_COMMON=3Dm
CONFIG_SND_SB16_DSP=3Dm

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=3Dm
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=3Dm
CONFIG_SND_CMIPCI=3Dm
CONFIG_SND_CS4281=3Dm
CONFIG_SND_CS46XX=3Dm
CONFIG_SND_CS46XX_NEW_DSP=3Dy
CONFIG_SND_CS5530=3Dm
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=3Dm
CONFIG_SND_EMU10K1X=3Dm
CONFIG_SND_ENS1370=3Dm
CONFIG_SND_ENS1371=3Dm
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=3Dm
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=3Dy
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=3Dy
CONFIG_SND_HDA_POWER_SAVE=3Dy
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=3D0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=3Dm
CONFIG_SND_INTEL8X0M=3Dm
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=3Dm
CONFIG_HID_SUPPORT=3Dy
CONFIG_HID=3Dy
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=3Dy

#
# USB Input Devices
#
CONFIG_USB_HID=3Dm
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=3Dy
CONFIG_HID_PID=3Dy
CONFIG_LOGITECH_FF=3Dy
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=3Dy
CONFIG_ZEROPLUS_FF=3Dy
CONFIG_USB_HIDDEV=3Dy

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=3Dm
CONFIG_USB_MOUSE=3Dm
CONFIG_USB_SUPPORT=3Dy
CONFIG_USB_ARCH_HAS_HCD=3Dy
CONFIG_USB_ARCH_HAS_OHCI=3Dy
CONFIG_USB_ARCH_HAS_EHCI=3Dy
CONFIG_USB=3Dm
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=3Dy
CONFIG_USB_DEVICE_CLASS=3Dy
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=3Dm
CONFIG_USB_EHCI_SPLIT_ISO=3Dy
CONFIG_USB_EHCI_ROOT_HUB_TT=3Dy
CONFIG_USB_EHCI_TT_NEWSCHED=3Dy
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=3Dm
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=3Dy
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=3Dm
CONFIG_USB_PRINTER=3Dm

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=3Dm
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=3Dy

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=3Dy

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=3Dm
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=3Dm
CONFIG_USB_TRANCEVIBRATOR=3Dm
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#
CONFIG_USB_ATM=3Dm
CONFIG_USB_SPEEDTOUCH=3Dm
# CONFIG_USB_CXACRU is not set
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=3Dy
CONFIG_LEDS_CLASS=3Dm

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=3Dy
CONFIG_LEDS_TRIGGER_TIMER=3Dm
CONFIG_LEDS_TRIGGER_HEARTBEAT=3Dm
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=3Dm
CONFIG_RTC_CLASS=3Dm

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=3Dy
CONFIG_RTC_INTF_PROC=3Dy
CONFIG_RTC_INTF_DEV=3Dy
CONFIG_RTC_INTF_DEV_UIE_EMUL=3Dy
CONFIG_RTC_DRV_TEST=3Dm

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=3Dm
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=3Dm
CONFIG_RTC_DRV_MAX6900=3Dm
CONFIG_RTC_DRV_RS5C372=3Dm
CONFIG_RTC_DRV_ISL1208=3Dm
CONFIG_RTC_DRV_X1205=3Dm
CONFIG_RTC_DRV_PCF8563=3Dm
CONFIG_RTC_DRV_PCF8583=3Dm
# CONFIG_RTC_DRV_M41T80 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=3Dm
CONFIG_RTC_DRV_DS1553=3Dm
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_DS1742=3Dm
CONFIG_RTC_DRV_M48T86=3Dm
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=3Dm

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_VIRTUALIZATION=3Dy
CONFIG_KVM=3Dm
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=3Dm

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set

#
# File systems
#
CONFIG_EXT2_FS=3Dy
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=3Dm
CONFIG_EXT3_FS_XATTR=3Dy
CONFIG_EXT3_FS_POSIX_ACL=3Dy
CONFIG_EXT3_FS_SECURITY=3Dy
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=3Dm
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=3Dy
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=3Dy
CONFIG_JFS_POSIX_ACL=3Dy
CONFIG_JFS_SECURITY=3Dy
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=3Dy
CONFIG_FS_POSIX_ACL=3Dy
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=3Dy
CONFIG_INOTIFY_USER=3Dy
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=3Dy
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=3Dm

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=3Dm
CONFIG_JOLIET=3Dy
CONFIG_ZISOFS=3Dy
CONFIG_UDF_FS=3Dm
CONFIG_UDF_NLS=3Dy

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=3Dm
CONFIG_MSDOS_FS=3Dm
CONFIG_VFAT_FS=3Dm
CONFIG_FAT_DEFAULT_CODEPAGE=3D850
CONFIG_FAT_DEFAULT_IOCHARSET=3D"iso8859-1"
CONFIG_NTFS_FS=3Dm
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=3Dy

#
# Pseudo filesystems
#
CONFIG_PROC_FS=3Dy
CONFIG_PROC_KCORE=3Dy
CONFIG_PROC_SYSCTL=3Dy
CONFIG_SYSFS=3Dy
CONFIG_TMPFS=3Dy
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=3Dm

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=3Dm
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=3Dy
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=3Dy
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=3Dm
CONFIG_CIFS_STATS=3Dy
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=3Dy
CONFIG_CIFS_XATTR=3Dy
CONFIG_CIFS_POSIX=3Dy
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=3Dm

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=3Dy
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=3Dy
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=3Dy
CONFIG_LDM_DEBUG=3Dy
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=3Dy
CONFIG_EFI_PARTITION=3Dy
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=3Dy
CONFIG_NLS_DEFAULT=3D"cp850"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=3Dm
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=3Dm
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=3Dm
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=3Dm
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=3Dm
CONFIG_NLS_ISO8859_15=3Dm
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=3Dm
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=3Dy
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=3Dy
CONFIG_PRINTK_TIME=3Dy
CONFIG_ENABLE_WARN_DEPRECATED=3Dy
CONFIG_ENABLE_MUST_CHECK=3Dy
CONFIG_MAGIC_SYSRQ=3Dy
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=3Dy
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=3Dy
CONFIG_DEBUG_SHIRQ=3Dy
CONFIG_DETECT_SOFTLOCKUP=3Dy
CONFIG_SCHED_DEBUG=3Dy
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=3Dy
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=3Dy
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=3Dy
CONFIG_KEYS_DEBUG_PROC_KEYS=3Dy
CONFIG_SECURITY=3Dy
CONFIG_SECURITY_NETWORK=3Dy
CONFIG_SECURITY_NETWORK_XFRM=3Dy
CONFIG_SECURITY_CAPABILITIES=3Dy
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=3Dy
CONFIG_CRYPTO_ALGAPI=3Dm
CONFIG_CRYPTO_ABLKCIPHER=3Dm
CONFIG_CRYPTO_AEAD=3Dm
CONFIG_CRYPTO_BLKCIPHER=3Dm
CONFIG_CRYPTO_HASH=3Dm
CONFIG_CRYPTO_MANAGER=3Dm
CONFIG_CRYPTO_HMAC=3Dm
CONFIG_CRYPTO_XCBC=3Dm
CONFIG_CRYPTO_NULL=3Dm
CONFIG_CRYPTO_MD4=3Dm
CONFIG_CRYPTO_MD5=3Dm
CONFIG_CRYPTO_SHA1=3Dm
CONFIG_CRYPTO_SHA256=3Dm
CONFIG_CRYPTO_SHA512=3Dm
CONFIG_CRYPTO_WP512=3Dm
CONFIG_CRYPTO_TGR192=3Dm
CONFIG_CRYPTO_GF128MUL=3Dm
CONFIG_CRYPTO_ECB=3Dm
CONFIG_CRYPTO_CBC=3Dm
CONFIG_CRYPTO_PCBC=3Dm
CONFIG_CRYPTO_LRW=3Dm
CONFIG_CRYPTO_XTS=3Dm
CONFIG_CRYPTO_CRYPTD=3Dm
CONFIG_CRYPTO_DES=3Dm
CONFIG_CRYPTO_FCRYPT=3Dm
CONFIG_CRYPTO_BLOWFISH=3Dm
CONFIG_CRYPTO_TWOFISH=3Dm
CONFIG_CRYPTO_TWOFISH_COMMON=3Dm
CONFIG_CRYPTO_TWOFISH_X86_64=3Dm
CONFIG_CRYPTO_SERPENT=3Dm
CONFIG_CRYPTO_AES=3Dm
CONFIG_CRYPTO_AES_X86_64=3Dm
CONFIG_CRYPTO_CAST5=3Dm
CONFIG_CRYPTO_CAST6=3Dm
CONFIG_CRYPTO_TEA=3Dm
CONFIG_CRYPTO_ARC4=3Dm
CONFIG_CRYPTO_KHAZAD=3Dm
CONFIG_CRYPTO_ANUBIS=3Dm
CONFIG_CRYPTO_SEED=3Dm
CONFIG_CRYPTO_DEFLATE=3Dm
CONFIG_CRYPTO_MICHAEL_MIC=3Dm
CONFIG_CRYPTO_CRC32C=3Dm
CONFIG_CRYPTO_CAMELLIA=3Dm
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=3Dm
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=3Dy
CONFIG_CRC_CCITT=3Dm
CONFIG_CRC16=3Dm
CONFIG_CRC_ITU_T=3Dm
CONFIG_CRC32=3Dy
CONFIG_CRC7=3Dm
CONFIG_LIBCRC32C=3Dm
CONFIG_ZLIB_INFLATE=3Dy
CONFIG_ZLIB_DEFLATE=3Dm
CONFIG_TEXTSEARCH=3Dy
CONFIG_TEXTSEARCH_KMP=3Dm
CONFIG_TEXTSEARCH_BM=3Dm
CONFIG_TEXTSEARCH_FSM=3Dm
CONFIG_PLIST=3Dy
CONFIG_HAS_IOMEM=3Dy
CONFIG_HAS_IOPORT=3Dy
CONFIG_HAS_DMA=3Dy



-
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Linux 2.6.24-rc7

[Alejandro Riveira Fernández]

El Sun, 6 Jan 2008 14:19:16 -0800 (PST)
Linus Torvalds <torvalds@linux-foundation.org> escribió:

> 
> It's been two weeks since rc6, but let's face it, with xmas and new years 
> (and birthdays) in between, there hasn't actually been a lot of working 
> days, and the incremental patch from -rc6 is about half the size of the 
> one from rc5->rc6.
> 
> And I'll be charitable and claim it's because it's all stabilizing, and 
> not because we've all been in a drunken stupor over the holidays.
> 
> The shortlog (appended below) is short and fairly informative. It's all 
> really just a lot of rather small changes. The diffstat shows a lot of 
> one- and two-liners, with just a few drivers (and the Cell platform) 
> getting a bit more attention, and the SLUB support of /proc/slabinfo 
> showing up as a blip.
> 
> Both git trees and tar-balls/patches pushed out, should be mirroring out 
> within minutes. So there are no excuses to not try it out, and see if your 
> favorite regression has been fixed.
> 
> 		Linus
> 
  Booted with it and I see 

 [   37.043998]                                                                                                               
[   37.043999] Call Trace:                                                                                                   
[   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x30                                                           
[   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc7e/0xd30                                                    
[   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50                                                                 
[   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_handler+0xbb/0x120                                          
[   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0                                                                
[   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0                                                                  
[   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30                                                                  
[   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90                                                                    
[   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0                                                                      
[   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100                                                                       
[   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40                                                                   
[   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa                                                                   
[   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x40                                                           
[   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0                                                                      
[   37.044146]                                                                                                               

 If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
 
Linux Varda 2.6.24-rc7 #3 SMP PREEMPT Mon Jan 7 14:47:13 CET 2008 x86_64 GNU/Linux
 
Gnu C                  4.1.3
Gnu make               3.81
binutils               2.18
util-linux             2.13
mount                  2.13
module-init-tools      3.3-pre2
e2fsprogs              1.40.2
jfsutils               1.1.11
reiserfsprogs          3.6.19
pcmciautils            014
PPP                    2.4.4
Linux C Library        2.6.1
Dynamic linker (ldd)   2.6.1
Procps                 3.2.7
Net-tools              1.60
Kbd                    [opcion...][archivo
Console-tools          0.2.3
Sh-utils               5.97
udev                   113
wireless-tools         29
Modules Loaded         af_packet binfmt_misc rfcomm l2cap bluetooth ipv6 powernow_k8 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative nf_conntrack_ftp nf_conntrack_irc xt_tcpudp ipt_ULOG xt_limit xt_state iptable_filter nf_conntrack_ipv4 nf_conntrack ip_tables x_tables kvm_amd kvm w83627ehf hwmon_vid lp arc4 ecb blkcipher cryptomgr snd_hda_intel crypto_algapi snd_pcm_oss snd_mixer_oss snd_pcm rt2500pci rt2x00pci rt2x00lib snd_seq_dummy rfkill snd_mpu401 input_polldev snd_seq_oss snd_mpu401_uart crc_itu_t snd_seq_midi snd_seq_midi_event mac80211 8250_pnp snd_rawmidi snd_seq parport_pc parport 8250 serial_core usbhid cfg80211 snd_timer snd_seq_device rtc evdev pcspkr ff_memless k8temp hwmon usblp snd eeprom_93cx6 i2c_ali1535 i2c_ali15x3 soundcore i2c_core snd_page_alloc button uli526x floppy sr_mod cdrom sg ehci_hcd ohci_hcd pata_acpi ata_generic r8169 usbcore unix thermal processor fan fuse



 #
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6
# Sun Jan  6 17:11:46 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PREEMPT_NOTIFIERS=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_HPET_TIMER=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SUSPEND_SMP_POSSIBLE=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION_SMP_POSSIBLE=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_BRIDGE_NETFILTER is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RR=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_RCSIMPLE=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
# CONFIG_NET_9P_DEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIL24=m
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=m
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
CONFIG_FIXED_MII_1000_FDX=y
CONFIG_FIXED_MII_AMNT=1
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
CONFIG_ULI526X=m
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_RTL8187=m
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_RFKILL=y
# CONFIG_RT2400PCI is not set
CONFIG_RT2500PCI=m
CONFIG_RT2500PCI_RFKILL=y
# CONFIG_RT61PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
# CONFIG_RT2X00_DEBUG is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not set
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp850"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ABLKCIPHER=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Monday 07 January 2008 17:14:15 Alejandro Riveira Fern=C3=A1ndez wro=
te:
> El Sun, 6 Jan 2008 14:19:16 -0800 (PST)
> Linus Torvalds <torvalds@linux-foundation.org> escribi=C3=B3:
>=20
> >=20
> > It's been two weeks since rc6, but let's face it, with xmas and new=
 years=20
> > (and birthdays) in between, there hasn't actually been a lot of wor=
king=20
> > days, and the incremental patch from -rc6 is about half the size of=
 the=20
> > one from rc5->rc6.
> >=20
> > And I'll be charitable and claim it's because it's all stabilizing,=
 and=20
> > not because we've all been in a drunken stupor over the holidays.
> >=20
> > The shortlog (appended below) is short and fairly informative. It's=
 all=20
> > really just a lot of rather small changes. The diffstat shows a lot=
 of=20
> > one- and two-liners, with just a few drivers (and the Cell platform=
)=20
> > getting a bit more attention, and the SLUB support of /proc/slabinf=
o=20
> > showing up as a blip.
> >=20
> > Both git trees and tar-balls/patches pushed out, should be mirrorin=
g out=20
> > within minutes. So there are no excuses to not try it out, and see =
if your=20
> > favorite regression has been fixed.
> >=20
> > 		Linus
> >=20
>   Booted with it and I see=20
>=20
>  [   37.043998]                                                      =
                                                        =20
> [   37.043999] Call Trace:                                           =
                                                       =20
> [   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x30   =
                                                       =20
> [   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc7e/0=
xd30                                                   =20
> [   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50         =
                                                       =20
> [   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_hand=
ler+0xbb/0x120                                         =20
> [   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0        =
                                                       =20
> [   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0          =
                                                       =20
> [   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30          =
                                                       =20
> [   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90            =
                                                       =20
> [   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0              =
                                                       =20
> [   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100               =
                                                       =20
> [   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40           =
                                                       =20
> [   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa           =
                                                       =20
> [   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x40   =
                                                       =20
> [   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0              =
                                                       =20
> [   37.044146]                                                       =
                                                       =20

Can you post the lines above this?
This might be a WARN_ON_ONCE() triggering, for which fixes are on their=
 way into
the wireless-2.6 tree.

--=20
Greetings Michael.
-
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Monday 07 January 2008 17:14:15 Alejandro Riveira Fernández wrote:
> El Sun, 6 Jan 2008 14:19:16 -0800 (PST)
> Linus Torvalds <torvalds@linux-foundation.org> escribió:
> 
> > 
> > It's been two weeks since rc6, but let's face it, with xmas and new years 
> > (and birthdays) in between, there hasn't actually been a lot of working 
> > days, and the incremental patch from -rc6 is about half the size of the 
> > one from rc5->rc6.
> > 
> > And I'll be charitable and claim it's because it's all stabilizing, and 
> > not because we've all been in a drunken stupor over the holidays.
> > 
> > The shortlog (appended below) is short and fairly informative. It's all 
> > really just a lot of rather small changes. The diffstat shows a lot of 
> > one- and two-liners, with just a few drivers (and the Cell platform) 
> > getting a bit more attention, and the SLUB support of /proc/slabinfo 
> > showing up as a blip.
> > 
> > Both git trees and tar-balls/patches pushed out, should be mirroring out 
> > within minutes. So there are no excuses to not try it out, and see if your 
> > favorite regression has been fixed.
> > 
> > 		Linus
> > 
>   Booted with it and I see 
> 
>  [   37.043998]                                                                                                               
> [   37.043999] Call Trace:                                                                                                   
> [   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x30                                                           
> [   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc7e/0xd30                                                    
> [   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50                                                                 
> [   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_handler+0xbb/0x120                                          
> [   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0                                                                
> [   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0                                                                  
> [   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30                                                                  
> [   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90                                                                    
> [   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0                                                                      
> [   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100                                                                       
> [   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40                                                                   
> [   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa                                                                   
> [   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x40                                                           
> [   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0                                                                      
> [   37.044146]                                                                                                               

Can you post the lines above this?
This might be a WARN_ON_ONCE() triggering, for which fixes are on their way into
the wireless-2.6 tree.

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[Alejandro Riveira Fernández]

El Mon, 7 Jan 2008 17:24:03 +0100
Michael Buesch <mb@bu3sch.de> escribi=C3=B3:

                                                                       =
             =20
>=20
> Can you post the lines above this?
> This might be a WARN_ON_ONCE() triggering, for which fixes are on the=
ir way into
> the wireless-2.6 tree.

 This?


[   37.043990] WARNING: at /home/alex/kernel/linux-2.6/net/mac80211/rx.=
c:1486 __ieee80211_rx()=20
[   37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3         =
                                                     =20
[   37.043998]                                                         =
                                                     =20
[   37.043999] Call Trace:                                             =
                                                     =20
[   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x30     =
                                                     =20
[   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc7e/0xd=
30                                                   =20
[   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50           =
                                                     =20
[   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_handle=
r+0xbb/0x120                                         =20
[   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0          =
                                                     =20
[   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0            =
                                                     =20
[   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30            =
                                                     =20
[   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90              =
                                                     =20
[   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0                =
                                                     =20
[   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100                 =
                                                     =20
[   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40             =
                                                     =20
[   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa             =
                                                     =20
[   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x40     =
                                                     =20
[   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0                =
                                                     =20
[   37.044146]                                                         =
                                                     =20


>=20
-
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Linux 2.6.24-rc7

[Alejandro Riveira Fernández]

El Mon, 7 Jan 2008 17:24:03 +0100
Michael Buesch <mb@bu3sch.de> escribió:

                                                                                     
> 
> Can you post the lines above this?
> This might be a WARN_ON_ONCE() triggering, for which fixes are on their way into
> the wireless-2.6 tree.

 This?


[   37.043990] WARNING: at /home/alex/kernel/linux-2.6/net/mac80211/rx.c:1486 __ieee80211_rx() 
[   37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3                                                               
[   37.043998]                                                                                                               
[   37.043999] Call Trace:                                                                                                   
[   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x30                                                           
[   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc7e/0xd30                                                    
[   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50                                                                 
[   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_handler+0xbb/0x120                                          
[   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0                                                                
[   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0                                                                  
[   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30                                                                  
[   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90                                                                    
[   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0                                                                      
[   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100                                                                       
[   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40                                                                   
[   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa                                                                   
[   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x40                                                           
[   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0                                                                      
[   37.044146]                                                                                                               


> 

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Monday 07 January 2008 17:52:48 Alejandro Riveira Fern=C3=A1ndez wro=
te:
> El Mon, 7 Jan 2008 17:24:03 +0100
> Michael Buesch <mb@bu3sch.de> escribi=C3=B3:
>=20
>                                                                      =
               =20
> >=20
> > Can you post the lines above this?
> > This might be a WARN_ON_ONCE() triggering, for which fixes are on t=
heir way into
> > the wireless-2.6 tree.
>=20
>  This?
>=20
>=20
> [   37.043990] WARNING: at /home/alex/kernel/linux-2.6/net/mac80211/r=
x.c:1486 __ieee80211_rx()=20
> [   37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3       =
                                                       =20
> [   37.043998]                                                       =
                                                       =20
> [   37.043999] Call Trace:                                           =
                                                       =20
> [   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x30   =
                                                       =20
> [   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc7e/0=
xd30                                                   =20
> [   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50         =
                                                       =20
> [   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_hand=
ler+0xbb/0x120                                         =20
> [   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0        =
                                                       =20
> [   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0          =
                                                       =20
> [   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30          =
                                                       =20
> [   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90            =
                                                       =20
> [   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0              =
                                                       =20
> [   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100               =
                                                       =20
> [   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40           =
                                                       =20
> [   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa           =
                                                       =20
> [   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x40   =
                                                       =20
> [   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0              =
                                                       =20
> [   37.044146]                                                       =
                                                       =20


Can you check if that is the
WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
in rx.c line 1486?
If that is the one, then fixes are already on their way upstream.
Ignore the harmless warning for now.

--=20
Greetings Michael.
-
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Monday 07 January 2008 17:52:48 Alejandro Riveira Fernández wrote:
> El Mon, 7 Jan 2008 17:24:03 +0100
> Michael Buesch <mb@bu3sch.de> escribió:
> 
>                                                                                      
> > 
> > Can you post the lines above this?
> > This might be a WARN_ON_ONCE() triggering, for which fixes are on their way into
> > the wireless-2.6 tree.
> 
>  This?
> 
> 
> [   37.043990] WARNING: at /home/alex/kernel/linux-2.6/net/mac80211/rx.c:1486 __ieee80211_rx() 
> [   37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3                                                               
> [   37.043998]                                                                                                               
> [   37.043999] Call Trace:                                                                                                   
> [   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x30                                                           
> [   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc7e/0xd30                                                    
> [   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50                                                                 
> [   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_handler+0xbb/0x120                                          
> [   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0                                                                
> [   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0                                                                  
> [   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30                                                                  
> [   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90                                                                    
> [   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0                                                                      
> [   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100                                                                       
> [   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40                                                                   
> [   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa                                                                   
> [   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x40                                                           
> [   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0                                                                      
> [   37.044146]                                                                                                               


Can you check if that is the
WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
in rx.c line 1486?
If that is the one, then fixes are already on their way upstream.
Ignore the harmless warning for now.

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[Alejandro Riveira Fernández]

El Mon, 7 Jan 2008 18:30:51 +0100
Michael Buesch <mb@bu3sch.de> escribi=C3=B3:

> On Monday 07 January 2008 17:52:48 Alejandro Riveira Fern=C3=A1ndez w=
rote:
> > El Mon, 7 Jan 2008 17:24:03 +0100
> > Michael Buesch <mb@bu3sch.de> escribi=C3=B3:
> >=20
> >                                                                    =
                 =20
> > >=20
> > > Can you post the lines above this?
> > > This might be a WARN_ON_ONCE() triggering, for which fixes are on=
 their way into
> > > the wireless-2.6 tree.
> >=20
> >  This?
> >=20
> >=20
> > [   37.043990] WARNING: at /home/alex/kernel/linux-2.6/net/mac80211=
/rx.c:1486 __ieee80211_rx()=20
> > [   37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3     =
                                                         =20
> > [   37.043998]                                                     =
                                                         =20
> > [   37.043999] Call Trace:                                         =
                                                         =20
> > [   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x30 =
                                                         =20
> > [   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc7e=
/0xd30                                                   =20
> > [   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50       =
                                                         =20
> > [   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_ha=
ndler+0xbb/0x120                                         =20
> > [   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0      =
                                                         =20
> > [   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0        =
                                                         =20
> > [   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30        =
                                                         =20
> > [   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90          =
                                                         =20
> > [   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0            =
                                                         =20
> > [   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100             =
                                                         =20
> > [   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40         =
                                                         =20
> > [   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa         =
                                                         =20
> > [   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x40 =
                                                         =20
> > [   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0            =
                                                         =20
> > [   37.044146]                                                     =
                                                         =20
>=20
>=20
> Can you check if that is the
> WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
> in rx.c line 1486?
=20
 How can I check? The source code I build does indeed have the line
 you quoted on net/mac80211/rx.c:1486 Is that what you are asking for?
=20
 WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);


=20
=20


> If that is the one, then fixes are already on their way upstream.
> Ignore the harmless warning for now.
 =20
 Thanks for your time



>=20
-
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Linux 2.6.24-rc7

[Alejandro Riveira Fernández]

El Mon, 7 Jan 2008 18:30:51 +0100
Michael Buesch <mb@bu3sch.de> escribió:

> On Monday 07 January 2008 17:52:48 Alejandro Riveira Fernández wrote:
> > El Mon, 7 Jan 2008 17:24:03 +0100
> > Michael Buesch <mb@bu3sch.de> escribió:
> > 
> >                                                                                      
> > > 
> > > Can you post the lines above this?
> > > This might be a WARN_ON_ONCE() triggering, for which fixes are on their way into
> > > the wireless-2.6 tree.
> > 
> >  This?
> > 
> > 
> > [   37.043990] WARNING: at /home/alex/kernel/linux-2.6/net/mac80211/rx.c:1486 __ieee80211_rx() 
> > [   37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3                                                               
> > [   37.043998]                                                                                                               
> > [   37.043999] Call Trace:                                                                                                   
> > [   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x30                                                           
> > [   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc7e/0xd30                                                    
> > [   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50                                                                 
> > [   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_handler+0xbb/0x120                                          
> > [   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0                                                                
> > [   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0                                                                  
> > [   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30                                                                  
> > [   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90                                                                    
> > [   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0                                                                      
> > [   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100                                                                       
> > [   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40                                                                   
> > [   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa                                                                   
> > [   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x40                                                           
> > [   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0                                                                      
> > [   37.044146]                                                                                                               
> 
> 
> Can you check if that is the
> WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
> in rx.c line 1486?
 
 How can I check? The source code I build does indeed have the line
 you quoted on net/mac80211/rx.c:1486 Is that what you are asking for?
 
 WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);


 
 


> If that is the one, then fixes are already on their way upstream.
> Ignore the harmless warning for now.
  
 Thanks for your time



> 

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Monday 07 January 2008 21:23:44 Alejandro Riveira Fern=C3=A1ndez wro=
te:
> > > [   37.043990] WARNING: at /home/alex/kernel/linux-2.6/net/mac802=
11/rx.c:1486 __ieee80211_rx()=20
> > > [   37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3   =
                                                           =20
> > > [   37.043998]                                                   =
                                                           =20
> > > [   37.043999] Call Trace:                                       =
                                                           =20
> > > [   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x3=
0                                                          =20
> > > [   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc=
7e/0xd30                                                   =20
> > > [   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50     =
                                                           =20
> > > [   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_=
handler+0xbb/0x120                                         =20
> > > [   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0    =
                                                           =20
> > > [   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0      =
                                                           =20
> > > [   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30      =
                                                           =20
> > > [   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90        =
                                                           =20
> > > [   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0          =
                                                           =20
> > > [   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100           =
                                                           =20
> > > [   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40       =
                                                           =20
> > > [   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa       =
                                                           =20
> > > [   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x4=
0                                                          =20
> > > [   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0          =
                                                           =20
> > > [   37.044146]                                                   =
                                                           =20
> >=20
> >=20
> > Can you check if that is the
> > WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
> > in rx.c line 1486?
> =20
>  How can I check? The source code I build does indeed have the line
>  you quoted on net/mac80211/rx.c:1486 Is that what you are asking for=
?
> =20
>  WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);

Yes fine.
Patches are on their way. Ignore the warning for now. It is harmless.

--=20
Greetings Michael.
-
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Monday 07 January 2008 21:23:44 Alejandro Riveira Fernández wrote:
> > > [   37.043990] WARNING: at /home/alex/kernel/linux-2.6/net/mac80211/rx.c:1486 __ieee80211_rx() 
> > > [   37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3                                                               
> > > [   37.043998]                                                                                                               
> > > [   37.043999] Call Trace:                                                                                                   
> > > [   37.044001]  <IRQ>  [<ffffffff80227fe3>] enqueue_task+0x13/0x30                                                           
> > > [   37.044040]  [<ffffffff88178cbe>] :mac80211:__ieee80211_rx+0xc7e/0xd30                                                    
> > > [   37.044044]  [<ffffffff80228062>] activate_task+0x32/0x50                                                                 
> > > [   37.044073]  [<ffffffff8816a28b>] :mac80211:ieee80211_tasklet_handler+0xbb/0x120                                          
> > > [   37.044086]  [<ffffffff80238d08>] tasklet_action+0x48/0xb0                                                                
> > > [   37.044091]  [<ffffffff80238c09>] __do_softirq+0x69/0xe0                                                                  
> > > [   37.044097]  [<ffffffff8020ce2c>] call_softirq+0x1c/0x30                                                                  
> > > [   37.044101]  [<ffffffff8020efe5>] do_softirq+0x35/0x90                                                                    
> > > [   37.044105]  [<ffffffff80238aa5>] irq_exit+0x95/0xa0                                                                      
> > > [   37.044108]  [<ffffffff8020f0c0>] do_IRQ+0x80/0x100                                                                       
> > > [   37.044111]  [<ffffffff8020a840>] default_idle+0x0/0x40                                                                   
> > > [   37.044115]  [<ffffffff8020c181>] ret_from_intr+0x0/0xa                                                                   
> > > [   37.044117]  <EOI>  [<ffffffff8020a869>] default_idle+0x29/0x40                                                           
> > > [   37.044130]  [<ffffffff8020a8f5>] cpu_idle+0x75/0xc0                                                                      
> > > [   37.044146]                                                                                                               
> > 
> > 
> > Can you check if that is the
> > WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
> > in rx.c line 1486?
>  
>  How can I check? The source code I build does indeed have the line
>  you quoted on net/mac80211/rx.c:1486 Is that what you are asking for?
>  
>  WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);

Yes fine.
Patches are on their way. Ignore the warning for now. It is harmless.

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[Alejandro Riveira Fernández]

El Tue, 8 Jan 2008 16:30:30 +0100
Michael Buesch <mb@bu3sch.de> escribi=C3=B3:

> On Monday 07 January 2008 21:23:44 Alejandro Riveira Fern=C3=A1ndez w=
rote:
>
> > =20
> >  How can I check? The source code I build does indeed have the line
> >  you quoted on net/mac80211/rx.c:1486 Is that what you are asking f=
or?
> > =20
> >  WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
>=20
> Yes fine.
> Patches are on their way. Ignore the warning for now. It is harmless.
>=20

  Thank you very much for your time. Keep on the good work :)


-
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Linux 2.6.24-rc7

[Alejandro Riveira Fernández]

El Tue, 8 Jan 2008 16:30:30 +0100
Michael Buesch <mb@bu3sch.de> escribió:

> On Monday 07 January 2008 21:23:44 Alejandro Riveira Fernández wrote:
>
> >  
> >  How can I check? The source code I build does indeed have the line
> >  you quoted on net/mac80211/rx.c:1486 Is that what you are asking for?
> >  
> >  WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
> 
> Yes fine.
> Patches are on their way. Ignore the warning for now. It is harmless.
> 

  Thank you very much for your time. Keep on the good work :)

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Tue, 8 Jan 2008, Michael Buesch wrote:
> > >
> > > Can you check if that is the
> > > WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
> > > in rx.c line 1486?
> 
> Yes fine.
> Patches are on their way. Ignore the warning for now. It is harmless.

I don't think this ever got fixed. 

I don't see any alternative but just uncomment that bogus warning, because 
it's otherwise going to just cause way more noise than it's worth. It's 
apparently known to developers, and as such it's worthless in the source 
code except as a way to make poor users worry.

It's been in the top oops/warnings report for the last three weeks, and I 
haven't gotten any patches for it, so I'm a bit grumpy. What's the point 
of having a WARN_ON() if nobody involved *does* anything about it?

		Linus

Re: Linux 2.6.24-rc7

[John W. Linville]

On Thu, Jan 24, 2008 at 12:27:03PM -0800, Linus Torvalds wrote:
> 
> 
> On Tue, 8 Jan 2008, Michael Buesch wrote:
> > > >
> > > > Can you check if that is the
> > > > WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
> > > > in rx.c line 1486?
> > 
> > Yes fine.
> > Patches are on their way. Ignore the warning for now. It is harmless.
> 
> I don't think this ever got fixed. 
> 
> I don't see any alternative but just uncomment that bogus warning, because 
> it's otherwise going to just cause way more noise than it's worth. It's 
> apparently known to developers, and as such it's worthless in the source 
> code except as a way to make poor users worry.
> 
> It's been in the top oops/warnings report for the last three weeks, and I 
> haven't gotten any patches for it, so I'm a bit grumpy. What's the point 
> of having a WARN_ON() if nobody involved *does* anything about it?

We've been trying to shame the iwlwifi team into fixing it.  They have
been blaming their firmware, but I think they could fix the alignment
in their driver.

There is no great harm in reverting
81100eb80add328c4d2a377326f15aa0e7236398 if you would like to go ahead
and push the 2.6.24 release.  I suspect, however, that the mac80211
guys would like to keep it (or put it back for 2.6.25) to continue
to shame driver developers in the future.

John
-- 
John W. Linville
linville@tuxdriver.com

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Thu, 24 Jan 2008, John W. Linville wrote:
> 
> There is no great harm in reverting
> 81100eb80add328c4d2a377326f15aa0e7236398 if you would like to go ahead
> and push the 2.6.24 release.  I suspect, however, that the mac80211
> guys would like to keep it (or put it back for 2.6.25) to continue
> to shame driver developers in the future.

I'd be happy to have it back in the development tree, I just don't want to 
have the noise for a release tree.

Will revert that commit with a comment to that effect. Thanks,

		Linus

Re: Linux 2.6.24-rc7

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 2129 bytes --]


On Thu, 2008-01-24 at 13:34 -0800, Linus Torvalds wrote:
> 
> On Thu, 24 Jan 2008, John W. Linville wrote:
> > 
> > There is no great harm in reverting
> > 81100eb80add328c4d2a377326f15aa0e7236398 if you would like to go ahead
> > and push the 2.6.24 release.  I suspect, however, that the mac80211
> > guys would like to keep it (or put it back for 2.6.25) to continue
> > to shame driver developers in the future.
> 
> I'd be happy to have it back in the development tree, I just don't want to 
> have the noise for a release tree.

I guess I should speak up, having added that warning :)

We had a huge discussion a while ago concerning alignment of packets
when somebody noticed that on sparc64 the zd1211rw driver was causing
alignment faults in the IP stack.

During the discussion, I noticed that hardly anybody of the wireless
driver developers knew about the alignment constraints and so I added
this warning to make people aware of when they would run into problems
on platforms like sparc and arm that can't do unaligned loads (or only
with extreme penalties).

I had myself been considering to revert this patch for the .24 release
as you've done now, so I definitely don't have a problem with that. All
drivers except the Intel ones have been fixed, and they are in the
luxurious position to be able to fix their firmware. I can see that
might take a while longer than posting a quick fix and honestly I had
hoped they'd post a quick fix so their hardware is usable on platforms
like arm/sparc that can't do unaligned loads, no such luck, however.

Please revert the revert after .24 though, there are quite a few
alignment constraints and we'd like to check them automatically. Also,
with 11n there is yet another constraint and John has just merged a
patch from me that checks for those constraints as well.

Since the only problematic driver is Intel's, they really should be able
to get their act together for .25 and fix their firmware, if not then
we'll have to think of something else like making their drivers
memmove() the packets to the right place.

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Fri, 25 Jan 2008, Johannes Berg wrote:
> 
> Since the only problematic driver is Intel's, they really should be able
> to get their act together for .25 and fix their firmware, if not then
> we'll have to think of something else like making their drivers
> memmove() the packets to the right place.

Well, there *is* a really simple solution:

 - realize that x86 (along with some few other architectures) is sane, and 
   not a crapola architecture that cannot do unaligneds well.

The thing is, not handling unaligned data well (and by "well", I don't 
mean just "without a trap", but "fast") is a problem for _other_ 
architectures, not x86. And quite frankly, x86 is not only the bulk of the 
machines out there, in this area it's also the one that did the right 
thing.

[ Lots of people think that x86 is ugly. The fact is, x86 is a paragon of 
  cleanliness when it comes to all the details that matter. When it comes 
  to ugly, the *really* ugly things is not in some complex ISA decoding, 
  but in all the horrible crap other architectures forces software to do 
  unnecessarily, when hardware can do it so much better! ]

So I would actually suggest that the wireless people realize that 
unaligned accesses aren't necessarily bad, and if there is code that needs 
alignment, maybe it's the *crap* architectures that should pay the price, 
not the good ones?

So I would suggest replacing that WARN_ON_ONCE() (which is gone now, but 
never mind, it marks the spot) with one of:

 - mark the header data structure unaligned, so that gcc will 
   automatically generate the extra instructions to do the accesses 
   automatically.

 - .. or, if there are just a few ones that actually matter, use 
   "get_unaligned()" in those places

 - .. or just make the WARN_ON_ONCE() be dependent on the broken 
   architecture in the first place.

 - .. or, finally, do something that penalizes crap and does

	#ifdef CONFIG_ARCH_NEEDS_ALIGNED
	  #define STRICT_ARCH_MINIMUM_ALIGNMENT alignof(..)
	#else
	  #define STRICT_ARCH_MINIMUM_ALIGNMENT 1
	#endif

	...
	unsigned long unalign;
	..
	unaligned = (unsigned long) ptr & (STRICT_ARCH_MINIMUM_ALIGNMENT-1);
	if (unaligned) {
		void *newptr = ptr;
		WARN_ON_ONCE(1);
		/* This assumes we have padding */
		newptr += STRICT_ARCH_MINIMUM_ALIGNMENT - unaligned;
		memmove(newptr, ptr, size);
	}
	..

because the thing is, we should give Intel credit for doing the right 
thing (in the CPU), rather than complain about the fact that they don't 
care about insane architectures that do the wrong thing and can't even 
work with the wireless driver in the first place!

			Linus

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Friday 25 January 2008 17:08:51 Linus Torvalds wrote:
> 
> On Fri, 25 Jan 2008, Johannes Berg wrote:
> > 
> > Since the only problematic driver is Intel's, they really should be able
> > to get their act together for .25 and fix their firmware, if not then
> > we'll have to think of something else like making their drivers
> > memmove() the packets to the right place.
> 
> Well, there *is* a really simple solution:
> 
>  - realize that x86 (along with some few other architectures) is sane, and 
>    not a crapola architecture that cannot do unaligneds well.
...
> because the thing is, we should give Intel credit for doing the right 
> thing (in the CPU), rather than complain about the fact that they don't 
> care about insane architectures that do the wrong thing and can't even 
> work with the wireless driver in the first place!

If we are talking about what's sane or not...
It's trivial to fix this in the firmware, like sane vendors like
Broadcom do.

Architectures that can't do unaligned access are heavily used in
wireless embedded routers. So we are not going to pay a huge
price there so just one vendor doesn't have to fix his firmware.

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Fri, 25 Jan 2008, Michael Buesch wrote:
> 
> If we are talking about what's sane or not...
> It's trivial to fix this in the firmware, like sane vendors like
> Broadcom do.

You just showed your total disregard for any sanity by calling broadcom 
"sane".

Quite frankly, Broadcom is probably the single worst chip manufacturer in 
terms of both bugginess of the silicon itself and in terms of lack of 
support.

> Architectures that can't do unaligned access are heavily used in
> wireless embedded routers. So we are not going to pay a huge
> price there so just one vendor doesn't have to fix his firmware.

.. and you also showed that you didn't even read my email and the options 
I outlined. The fact is, the Intel wireless chipset only works with x86 
CPU's. There is absolutely zero "price" on crap CPU's, because they are 
simply not relevant to this driver.

		Linus

Re: Linux 2.6.24-rc7

[Dan Williams]

On Fri, 2008-01-25 at 08:43 -0800, Linus Torvalds wrote:
> 
> On Fri, 25 Jan 2008, Michael Buesch wrote:
> > 
> > If we are talking about what's sane or not...
> > It's trivial to fix this in the firmware, like sane vendors like
> > Broadcom do.
> 
> You just showed your total disregard for any sanity by calling broadcom 
> "sane".
> 
> Quite frankly, Broadcom is probably the single worst chip manufacturer in 
> terms of both bugginess of the silicon itself and in terms of lack of 
> support.
> 
> > Architectures that can't do unaligned access are heavily used in
> > wireless embedded routers. So we are not going to pay a huge
> > price there so just one vendor doesn't have to fix his firmware.
> 
> .. and you also showed that you didn't even read my email and the options 
> I outlined. The fact is, the Intel wireless chipset only works with x86 
> CPU's. There is absolutely zero "price" on crap CPU's, because they are 
> simply not relevant to this driver.

Except that some kernel developers (not you) have made noise about
requiring Intel to ensure their hardware and drivers work on platforms
that they are unlikely ever to work on.  There was resistance to merging
iwlwifi because it wasn't quite endian-safe at the time (even though
99.99% of iwl3945 and 4965 cards will be on x86) and Intel's track
record in not endian-safing ipw2200 and ipw2100 was brought up.
Eventually Intel developers did go through and try to do the correct
sparse annotations and endian conversions and the driver got merged.

Does Intel need to make iwlwifi and ipw2x00 work reliably on platforms
other than x86?  Or don't they?

Dan

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Fri, 25 Jan 2008, Dan Williams wrote:
> 
> Does Intel need to make iwlwifi and ipw2x00 work reliably on platforms
> other than x86?  Or don't they?

Why should they? 

If somebody else takes over maintenance, because Intel does a bad job, 
that's fine.

If somebody else sends in patches and they get accepted "around" Intel, 
that's obviously also fine.

But complaining about a vendor who does a good job technically, for 
non-technical reasons, I really don't see that as being fine.

Is it even physically *possible* to use that Intel wireless chipset with 
anything but x86 CPU's (not just that, but actually _Intel_ x86 CPU's)? 
And would it make any sense what-so-ever even if it was?

And yes, portability is a great thing, but quite frankly, so is good 
hardware. I personally can't really blame Intel engineers for not caring 
about irrelevant hardware. 

We should make technical decisions on _technical_ grounds, not some 
perceived "this is how the world should work" grounds.

		Linus

Re: Linux 2.6.24-rc7

[Dan Williams]

On Fri, 2008-01-25 at 09:38 -0800, Linus Torvalds wrote:
> 
> On Fri, 25 Jan 2008, Dan Williams wrote:
> > 
> > Does Intel need to make iwlwifi and ipw2x00 work reliably on platforms
> > other than x86?  Or don't they?
> 
> Why should they? 
> 
> If somebody else takes over maintenance, because Intel does a bad job, 
> that's fine.
> 
> If somebody else sends in patches and they get accepted "around" Intel, 
> that's obviously also fine.
> 
> But complaining about a vendor who does a good job technically, for 
> non-technical reasons, I really don't see that as being fine.
> 
> Is it even physically *possible* to use that Intel wireless chipset with 
> anything but x86 CPU's (not just that, but actually _Intel_ x86 CPU's)? 
> And would it make any sense what-so-ever even if it was?

Yeah, 3945 and 4965 cards are mini PCI-E these days.  And there are
ipw2100, ipw2200, and ipw2915 mini PCI cards that you could stick in
embedded systems and such.  Though of course everyone doing embedded
stuff uses either Atheros or PrismII still, certainly not ipw/iwl.

This discussion occurred on May 18 - May 21, 2007 on linux-wireless with
the thread heading "[PATCH]  Add iwlwifi wireless drivers [part 2/2]".

Dan

> And yes, portability is a great thing, but quite frankly, so is good 
> hardware. I personally can't really blame Intel engineers for not caring 
> about irrelevant hardware. 
> 
> We should make technical decisions on _technical_ grounds, not some 
> perceived "this is how the world should work" grounds.
> 
> 		Linus

Re: Linux 2.6.24-rc7

[Russell S. Senior]

>>>>> "Dan" == Dan Williams <dcbw@redhat.com> writes:

Linus> Is it even physically *possible* to use that Intel wireless
Linus> chipset with anything but x86 CPU's (not just that, but
Linus> actually _Intel_ x86 CPU's)?  And would it make any sense
Linus> what-so-ever even if it was?

Dan> Yeah, 3945 and 4965 cards are mini PCI-E these days.  And there
Dan> are ipw2100, ipw2200, and ipw2915 mini PCI cards that you could
Dan> stick in embedded systems and such.  Though of course everyone
Dan> doing embedded stuff uses either Atheros or PrismII still,
Dan> certainly not ipw/iwl.

Fwiw, I would if I could.  I've got a couple mini-PCI Intel radios
sitting here that I would like to be able to use in various single
board computers (e.g. soekris and netgear wgt634u).  Right now, I am
mostly constrained to using Atheros radios, which is a situation I'd
rather not be in and have been looking forward to growing out of.


-- 
Russell Senior         ``I have nine fingers; you have ten.''
seniorr@aracnet.com

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Fri, 25 Jan 2008, Linus Torvalds wrote:
> 
> But complaining about a vendor who does a good job technically, for 
> non-technical reasons, I really don't see that as being fine.

Side note: I also think the wireless parts here are doing things wrong. 

Why _would_ you care about alignment? We used to have issues like that in 
the normal networking code, and it was a mistake there too. Why isn't the 
wireless stack just extracting the header explicitly, or using 
"get_unaligned()" like regular networking?

With ethernet, there were chips that could only do DMA at certain 
alignments etc, together with various other headers being involved, making 
it impossible to require alignment without memcpy(), and I don't think 
we've had any issues there.

People have to add in the proper "get_unaligned()" calls that they forgot 
or didn't think about to various pieces every once in a while, but on most 
platforms you get a nice warning when something isn't doing the right 
thing (I think some borken ARM cores are the exception and will just 
silently do the wrong thing entirely).

So it's not like this is a new issue, and I can't recall us ever before 
having ended up requiring alignment when it hit us.

			Linus

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Friday 25 January 2008 19:22:13 Linus Torvalds wrote:
> 
> On Fri, 25 Jan 2008, Linus Torvalds wrote:
> > 
> > But complaining about a vendor who does a good job technically, for 
> > non-technical reasons, I really don't see that as being fine.
> 
> Side note: I also think the wireless parts here are doing things wrong. 
> 
> Why _would_ you care about alignment? We used to have issues like that in 
> the normal networking code, and it was a mistake there too. Why isn't the 
> wireless stack just extracting the header explicitly, or using 
> "get_unaligned()" like regular networking?

The problem is _not_ the wireless header access, but the alignment of the embedded
protocol stack, if the header does not have a size aligned to 4.
Do we want to clutter the whole networking stack below wireless with
get_unaligned() or attribute(packed) or something like that?

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Fri, 25 Jan 2008, Michael Buesch wrote:
> 
> The problem is _not_ the wireless header access, but the alignment of the embedded
> protocol stack, if the header does not have a size aligned to 4.
> Do we want to clutter the whole networking stack below wireless with
> get_unaligned() or attribute(packed) or something like that?

That's what all the other protocols do, isn't it?

For example, on PowerPC, NET_IP_ALIGN is 0 - explicitly so that the *dma* 
from the card should be aligned, even if that in turn means that the IP 
payload itself is then just two-byte aligned rather than word-aligned 
(14-byte ethernet headers and all that).

[ Side note - I _used_ to know the networking code. That was about eight 
  to ten years ago. I'm really happy having a maintainer for it and not 
  having to know all the details any more, so maybe things have changed. ]

I do think that we generally should try to make the drivers do as little 
complex stuff as humanly possible, and expect as little from hardware (and 
firmware counts in that group) as we can. If some higher-level thing 
really needs things aligned in order to not have to have lots of ugly 
code, it should generally extract that alignment itself.

			Linus

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Friday 25 January 2008 20:07:47 Linus Torvalds wrote:
> 
> On Fri, 25 Jan 2008, Michael Buesch wrote:
> > 
> > The problem is _not_ the wireless header access, but the alignment of the embedded
> > protocol stack, if the header does not have a size aligned to 4.
> > Do we want to clutter the whole networking stack below wireless with
> > get_unaligned() or attribute(packed) or something like that?
> 
> That's what all the other protocols do, isn't it?
> 
> For example, on PowerPC, NET_IP_ALIGN is 0 - explicitly so that the *dma* 
> from the card should be aligned, even if that in turn means that the IP 
> payload itself is then just two-byte aligned rather than word-aligned 
> (14-byte ethernet headers and all that).
> 
> [ Side note - I _used_ to know the networking code. That was about eight 
>   to ten years ago. I'm really happy having a maintainer for it and not 
>   having to know all the details any more, so maybe things have changed. ]
> 
> I do think that we generally should try to make the drivers do as little 
> complex stuff as humanly possible, and expect as little from hardware (and 
> firmware counts in that group) as we can. If some higher-level thing 
> really needs things aligned in order to not have to have lots of ugly 
> code, it should generally extract that alignment itself.

So we should forward any bugreport about alignment issues to the
netdev people. That's perfectly fine with me. If netdev people are OK with that,
I'm also OK with removing the warning. :)

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[John W. Linville]

On Fri, Jan 25, 2008 at 11:07:47AM -0800, Linus Torvalds wrote:
> 
> 
> On Fri, 25 Jan 2008, Michael Buesch wrote:
> > 
> > The problem is _not_ the wireless header access, but the alignment of the embedded
> > protocol stack, if the header does not have a size aligned to 4.
> > Do we want to clutter the whole networking stack below wireless with
> > get_unaligned() or attribute(packed) or something like that?
> 
> That's what all the other protocols do, isn't it?
> 
> For example, on PowerPC, NET_IP_ALIGN is 0 - explicitly so that the *dma* 
> from the card should be aligned, even if that in turn means that the IP 
> payload itself is then just two-byte aligned rather than word-aligned 
> (14-byte ethernet headers and all that).

http://kerneltrap.org/mailarchive/linux-netdev/2007/11/24/442496

Quoth Herbert Xu:

"OK.  Let me clarify this a bit more.  We require at least one
of the following rules to be met:

* the IPv4/IPv6 header is aligned by 8 bytes on reception;
* or the platform provides unaligned exception handlers.

So if your platform violates both rules then it won't work with
the IP stack, simple as that.  Fortunately I don't think such a
platform exists currently on Linux."

That puts mac80211 in an awkward position.  It is not architecture
code, so it can't make any assumptions about what is or isn't OK.
So, we need to present aligned data to the network stack.

We could put the alignment onus on mac80211, but this has proven to be
very solvable at (near?) zero cost by all the other drivers.  I suppose
we could put code in mac80211 to check/correct the alignment anyway
and hope that the cost of such checking is small enough not to matter
as long as drivers are passing aligned data anyway.  But that seems
a bit silly, when at least so far only this one driver has balked at
doing the right thing.

I'm working on some iwlwifi patches to check/correct alignment.

(Hmmm..."aligned by 8 bytes", so our warning and my iwlwifi patch
may still not be right...)

John
-- 
John W. Linville
linville@tuxdriver.com

Re: Linux 2.6.24-rc7

[John W. Linville]

On Fri, Jan 25, 2008 at 02:48:07PM -0500, John W. Linville wrote:

> http://kerneltrap.org/mailarchive/linux-netdev/2007/11/24/442496
> 
> Quoth Herbert Xu:
> 
> "OK.  Let me clarify this a bit more.  We require at least one
> of the following rules to be met:
> 
> * the IPv4/IPv6 header is aligned by 8 bytes on reception;
> * or the platform provides unaligned exception handlers.

> (Hmmm..."aligned by 8 bytes", so our warning and my iwlwifi patch
> may still not be right...)

http://kerneltrap.org/mailarchive/linux-netdev/2007/11/25/443558

More from Herbert:

"Sorry I was wrong about the 8 bytes requirement.  Although the
IPv6 protocol does try to maintain an 8-byte alignment the Linux
stack never does anything that requires that.

So 4 bytes is enough."

Phew!

John
-- 
John W. Linville
linville@tuxdriver.com

Re: Linux 2.6.24-rc7

[John W. Linville]

On Fri, Jan 25, 2008 at 02:50:37PM -0500, John W. Linville wrote:
> On Fri, Jan 25, 2008 at 02:48:07PM -0500, John W. Linville wrote:
> 
> > http://kerneltrap.org/mailarchive/linux-netdev/2007/11/24/442496
> > 
> > Quoth Herbert Xu:
> > 
> > "OK.  Let me clarify this a bit more.  We require at least one
> > of the following rules to be met:
> > 
> > * the IPv4/IPv6 header is aligned by 8 bytes on reception;
> > * or the platform provides unaligned exception handlers.
> 
> > (Hmmm..."aligned by 8 bytes", so our warning and my iwlwifi patch
> > may still not be right...)
> 
> http://kerneltrap.org/mailarchive/linux-netdev/2007/11/25/443558
> 
> More from Herbert:
> 
> "Sorry I was wrong about the 8 bytes requirement.  Although the
> IPv6 protocol does try to maintain an 8-byte alignment the Linux
> stack never does anything that requires that.
> 
> So 4 bytes is enough."
> 
> Phew!

Alright, here is my whack at it...  The iwl_handle_data_packet_monitor
bits are untested, as I appear to be too daft to figure-out how to
exercise those paths.

Anyway, this is mostly just so we can scope the driver change required
in absence of a firmware change.  Persumably the changes required if
we were to put such code in mac80211 would be similar.

John

-----

From: John W. Linville <linville@tuxdriver.com>
Subject: [PATCH] iwlwifi: move data at CPU to ensure 4-byte alignment for payload

Ugly, but if the firmware won't cooperate...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-3945.c     |   13 ++++++++++---
 drivers/net/wireless/iwlwifi/iwl-4965.c     |   10 +++++++++-
 drivers/net/wireless/iwlwifi/iwl3945-base.c |   10 +++++++++-
 drivers/net/wireless/iwlwifi/iwl4965-base.c |   10 +++++++++-
 4 files changed, 37 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 3a45fe9..06cd28e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -252,6 +252,7 @@ static void iwl3945_handle_data_packet(struct iwl_priv *priv, int is_data,
 	struct iwl_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 	struct iwl_rx_frame_end *rx_end = IWL_RX_END(pkt);
 	short len = le16_to_cpu(rx_hdr->len);
+	int hdrlen, align;
 
 	/* We received data from the HW, so stop the watchdog */
 	if (unlikely((len + IWL_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) {
@@ -275,11 +276,17 @@ static void iwl3945_handle_data_packet(struct iwl_priv *priv, int is_data,
 		return;
 	}
 
-	skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt);
+	hdr = (void *)rx_hdr->payload;
+	hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control));
+	align = hdrlen & 3;
+
+	skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt - align);
 	/* Set the size of the skb to the size of the frame */
-	skb_put(rxb->skb, le16_to_cpu(rx_hdr->len));
+	skb_put(rxb->skb, len);
 
-	hdr = (void *)rxb->skb->data;
+        /* align payload on 4-byte boundary if necessary */
+	if (align)
+		memmove((void *)hdr - align, hdr, len);
 
 	if (iwl_param_hwcrypto)
 		iwl_set_decrypted_flag(priv, rxb->skb,
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 891f90d..11eb75b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -3496,6 +3496,7 @@ static void iwl4965_handle_data_packet(struct iwl_priv *priv, int is_data,
 	__le32 *rx_end;
 	unsigned int skblen;
 	u32 ampdu_status;
+	int hdrlen, align;
 
 	if (!include_phy && priv->last_phy_res[0])
 		rx_start = (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1];
@@ -3533,10 +3534,17 @@ static void iwl4965_handle_data_packet(struct iwl_priv *priv, int is_data,
 	ampdu_status = le32_to_cpu(*rx_end);
 	skblen = ((u8 *) rx_end - (u8 *) & pkt->u.raw[0]) + sizeof(u32);
 
+	hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control));
+	align = hdrlen & 3;
+
 	/* start from MAC */
-	skb_reserve(rxb->skb, (void *)hdr - (void *)pkt);
+	skb_reserve(rxb->skb, (void *)hdr - (void *)pkt - align);
 	skb_put(rxb->skb, len);	/* end where data ends */
 
+	/* align payload on 4-byte boundary if necessary */
+	if (align)
+		memmove(rxb->skb->data, hdr, len);
+
 	/* We only process data packets if the interface is open */
 	if (unlikely(!priv->is_open)) {
 		IWL_DEBUG_DROP_LIMIT
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 1a6b0e0..d6018bd 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3056,7 +3056,9 @@ void iwl_handle_data_packet_monitor(struct iwl_priv *priv,
 				    struct ieee80211_rx_status *stats,
 				    u16 phy_flags)
 {
+	struct ieee80211_hdr *hdr;
 	struct iwl_rt_rx_hdr *iwl_rt;
+	int hdrlen, align;
 
 	/* First cache any information we need before we overwrite
 	 * the information provided in the skb from the hardware */
@@ -3072,8 +3074,14 @@ void iwl_handle_data_packet_monitor(struct iwl_priv *priv,
 		return;
 	}
 
+	/* determine payload alignment adjustment */
+	hdr = data;
+	hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control))
+		+ sizeof(*iwl_rt);
+	align = 4 - (hdrlen & 3); /* invert align since already at skb head */
+
 	/* copy the frame data to write after where the radiotap header goes */
-	iwl_rt = (void *)rxb->skb->data;
+	iwl_rt = (void *)rxb->skb->data + align;
 	memmove(iwl_rt->payload, data, len);
 
 	iwl_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 6cd57c2..9ef9d14 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -3144,7 +3144,9 @@ void iwl_handle_data_packet_monitor(struct iwl_priv *priv,
 				    struct ieee80211_rx_status *stats,
 				    u16 phy_flags)
 {
+	struct ieee80211_hdr *hdr;
 	struct iwl_rt_rx_hdr *iwl_rt;
+	int hdrlen, align;
 
 	/* First cache any information we need before we overwrite
 	 * the information provided in the skb from the hardware */
@@ -3160,8 +3162,14 @@ void iwl_handle_data_packet_monitor(struct iwl_priv *priv,
 		return;
 	}
 
+	/* determine payload alignment adjustment */
+	hdr = data;
+	hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control))
+		+ sizeof(*iwl_rt);
+	align = 4 - (hdrlen & 3); /* invert align since already at skb head */
+
 	/* copy the frame data to write after where the radiotap header goes */
-	iwl_rt = (void *)rxb->skb->data;
+	iwl_rt = (void *)rxb->skb->data + align;
 	memmove(iwl_rt->payload, data, len);
 
 	iwl_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
-- 
1.5.3.3

-- 
John W. Linville
linville@tuxdriver.com

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Fri, 25 Jan 2008, John W. Linville wrote:
> 
> Anyway, this is mostly just so we can scope the driver change required
> in absence of a firmware change.  Persumably the changes required if
> we were to put such code in mac80211 would be similar.

Make this conditional on archictures that need it, please.

And why is it suddenly smart to do this in three drivers rather than one 
upper layer?

		Linus

Re: Linux 2.6.24-rc7

[John W. Linville]

On Fri, Jan 25, 2008 at 01:56:15PM -0800, Linus Torvalds wrote:
> 
> 
> On Fri, 25 Jan 2008, John W. Linville wrote:
> > 
> > Anyway, this is mostly just so we can scope the driver change required
> > in absence of a firmware change.  Persumably the changes required if
> > we were to put such code in mac80211 would be similar.
> 
> Make this conditional on archictures that need it, please.
> 
> And why is it suddenly smart to do this in three drivers rather than one 
> upper layer?

Two drivers, FWIW... :-)

Given that we don't have a CONFIG_MUST_ALIGN at present, I'm not sure
it is worth adding one for either an iwlwifi fix or a mac80211 one.
Or are there other issues that might be resolved or aided by such
a definition?  It doesn't seem to have been needed so far.

Maybe it would be easier to add a CONFIG_MAC80211_ALIGN_PAYLOAD option
around some code in mac80211 to fix-up alignments?  Then users of
alignment-sensitive arches could turn-on that option, and the rest
of us would leave it off.  Another (non-exclusive) option would be
to put CONFIG_MAC80211_DEBUG around the alignment warning so that
most people would never see it.

Thoughts?  I'm just looking for a resolution... :-)

John
-- 
John W. Linville
linville@tuxdriver.com

Re: Linux 2.6.24-rc7

[Guy Cohen]

On 1/26/08, John W. Linville <linville@tuxdriver.com> wrote:
> On Fri, Jan 25, 2008 at 01:56:15PM -0800, Linus Torvalds wrote:
> > And why is it suddenly smart to do this in three drivers rather than one
> > upper layer?
>
> Two drivers, FWIW... :-)

IMO, The right place to put a conditional memmove is at the 802.11 to
802.3 conversion. currnetly iwlwifi always hands an aligned 802.11
frame to mac80211. If it is needed to re-align the frame after
stripping the odd 802.11 header to support CPUs that can't handle it,
it makes sense to do it there.

> John

Re: Linux 2.6.24-rc7

[David Miller]

From: "John W. Linville" <linville@tuxdriver.com>
Date: Fri, 25 Jan 2008 17:46:31 -0500

> Given that we don't have a CONFIG_MUST_ALIGN at present, I'm not sure
> it is worth adding one for either an iwlwifi fix or a mac80211 one.
> Or are there other issues that might be resolved or aided by such
> a definition?  It doesn't seem to have been needed so far.

We do have a need, look at the drivers like Tulip that
encode this into a big list of architecture ifdef checks.

Re: Linux 2.6.24-rc7

[David Miller]

From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 25 Jan 2008 13:56:15 -0800 (PST)

> 
> 
> On Fri, 25 Jan 2008, John W. Linville wrote:
> > 
> > Anyway, this is mostly just so we can scope the driver change required
> > in absence of a firmware change.  Persumably the changes required if
> > we were to put such code in mac80211 would be similar.
> 
> Make this conditional on archictures that need it, please.
> 
> And why is it suddenly smart to do this in three drivers rather than one 
> upper layer?
> 

Grep the ethernet drivers Linus, we've been doing this since
the Donald Becker era.

The ones that cannot provide the necessary alignment copy on
platforms that cannot handle it without traps.

Re: Linux 2.6.24-rc7

[Guy Cohen]

NACK

memmove will cause redundant high CPU utilization in 11n High Throughput.

Such changes, if done, should be wrapped with some
#ifdef CANT_HANDLE_UNALIGNED_....

And better be done in mac80211 and not at driver level. iwlwifi skb is
802.11 and 802.3 frame.

On 1/25/08, John W. Linville <linville@tuxdriver.com> wrote:

> Alright, here is my whack at it...  The iwl_handle_data_packet_monitor
> bits are untested, as I appear to be too daft to figure-out how to
> exercise those paths.
>
> Anyway, this is mostly just so we can scope the driver change required
> in absence of a firmware change.  Persumably the changes required if
> we were to put such code in mac80211 would be similar.
>
> John
>
> -----
>
> From: John W. Linville <linville@tuxdriver.com>
> Subject: [PATCH] iwlwifi: move data at CPU to ensure 4-byte alignment for payload
>
> Ugly, but if the firmware won't cooperate...
>
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
> ---
>  drivers/net/wireless/iwlwifi/iwl-3945.c     |   13 ++++++++++---
>  drivers/net/wireless/iwlwifi/iwl-4965.c     |   10 +++++++++-
>  drivers/net/wireless/iwlwifi/iwl3945-base.c |   10 +++++++++-
>  drivers/net/wireless/iwlwifi/iwl4965-base.c |   10 +++++++++-
>  4 files changed, 37 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
> index 3a45fe9..06cd28e 100644
> --- a/drivers/net/wireless/iwlwifi/iwl-3945.c
> +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
> @@ -252,6 +252,7 @@ static void iwl3945_handle_data_packet(struct iwl_priv *priv, int is_data,
>        struct iwl_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
>        struct iwl_rx_frame_end *rx_end = IWL_RX_END(pkt);
>        short len = le16_to_cpu(rx_hdr->len);
> +       int hdrlen, align;
>
>        /* We received data from the HW, so stop the watchdog */
>        if (unlikely((len + IWL_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) {
> @@ -275,11 +276,17 @@ static void iwl3945_handle_data_packet(struct iwl_priv *priv, int is_data,
>                return;
>        }
>
> -       skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt);
> +       hdr = (void *)rx_hdr->payload;
> +       hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control));
> +       align = hdrlen & 3;
> +
> +       skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt - align);
>        /* Set the size of the skb to the size of the frame */
> -       skb_put(rxb->skb, le16_to_cpu(rx_hdr->len));
> +       skb_put(rxb->skb, len);
>
> -       hdr = (void *)rxb->skb->data;
> +        /* align payload on 4-byte boundary if necessary */
> +       if (align)
> +               memmove((void *)hdr - align, hdr, len);
>
>        if (iwl_param_hwcrypto)
>                iwl_set_decrypted_flag(priv, rxb->skb,
> diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
> index 891f90d..11eb75b 100644
> --- a/drivers/net/wireless/iwlwifi/iwl-4965.c
> +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
> @@ -3496,6 +3496,7 @@ static void iwl4965_handle_data_packet(struct iwl_priv *priv, int is_data,
>        __le32 *rx_end;
>        unsigned int skblen;
>        u32 ampdu_status;
> +       int hdrlen, align;
>
>        if (!include_phy && priv->last_phy_res[0])
>                rx_start = (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1];
> @@ -3533,10 +3534,17 @@ static void iwl4965_handle_data_packet(struct iwl_priv *priv, int is_data,
>        ampdu_status = le32_to_cpu(*rx_end);
>        skblen = ((u8 *) rx_end - (u8 *) & pkt->u.raw[0]) + sizeof(u32);
>
> +       hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control));
> +       align = hdrlen & 3;
> +
>        /* start from MAC */
> -       skb_reserve(rxb->skb, (void *)hdr - (void *)pkt);
> +       skb_reserve(rxb->skb, (void *)hdr - (void *)pkt - align);
>        skb_put(rxb->skb, len); /* end where data ends */
>
> +       /* align payload on 4-byte boundary if necessary */
> +       if (align)
> +               memmove(rxb->skb->data, hdr, len);
> +
>        /* We only process data packets if the interface is open */
>        if (unlikely(!priv->is_open)) {
>                IWL_DEBUG_DROP_LIMIT
> diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
> index 1a6b0e0..d6018bd 100644
> --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
> +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
> @@ -3056,7 +3056,9 @@ void iwl_handle_data_packet_monitor(struct iwl_priv *priv,
>                                    struct ieee80211_rx_status *stats,
>                                    u16 phy_flags)
>  {
> +       struct ieee80211_hdr *hdr;
>        struct iwl_rt_rx_hdr *iwl_rt;
> +       int hdrlen, align;
>
>        /* First cache any information we need before we overwrite
>         * the information provided in the skb from the hardware */
> @@ -3072,8 +3074,14 @@ void iwl_handle_data_packet_monitor(struct iwl_priv *priv,
>                return;
>        }
>
> +       /* determine payload alignment adjustment */
> +       hdr = data;
> +       hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control))
> +               + sizeof(*iwl_rt);
> +       align = 4 - (hdrlen & 3); /* invert align since already at skb head */
> +
>        /* copy the frame data to write after where the radiotap header goes */
> -       iwl_rt = (void *)rxb->skb->data;
> +       iwl_rt = (void *)rxb->skb->data + align;
>        memmove(iwl_rt->payload, data, len);
>
>        iwl_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
> diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
> index 6cd57c2..9ef9d14 100644
> --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
> +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
> @@ -3144,7 +3144,9 @@ void iwl_handle_data_packet_monitor(struct iwl_priv *priv,
>                                    struct ieee80211_rx_status *stats,
>                                    u16 phy_flags)
>  {
> +       struct ieee80211_hdr *hdr;
>        struct iwl_rt_rx_hdr *iwl_rt;
> +       int hdrlen, align;
>
>        /* First cache any information we need before we overwrite
>         * the information provided in the skb from the hardware */
> @@ -3160,8 +3162,14 @@ void iwl_handle_data_packet_monitor(struct iwl_priv *priv,
>                return;
>        }
>
> +       /* determine payload alignment adjustment */
> +       hdr = data;
> +       hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control))
> +               + sizeof(*iwl_rt);
> +       align = 4 - (hdrlen & 3); /* invert align since already at skb head */
> +
>        /* copy the frame data to write after where the radiotap header goes */
> -       iwl_rt = (void *)rxb->skb->data;
> +       iwl_rt = (void *)rxb->skb->data + align;
>        memmove(iwl_rt->payload, data, len);
>
>        iwl_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
> --
> 1.5.3.3
>
> --
> John W. Linville
> linville@tuxdriver.com
> -
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Re: Linux 2.6.24-rc7

[David Miller]

From: "John W. Linville" <linville@tuxdriver.com>
Date: Fri, 25 Jan 2008 16:18:15 -0500

> Alright, here is my whack at it...  The iwl_handle_data_packet_monitor
> bits are untested, as I appear to be too daft to figure-out how to
> exercise those paths.
> 
> Anyway, this is mostly just so we can scope the driver change required
> in absence of a firmware change.  Persumably the changes required if
> we were to put such code in mac80211 would be similar.

If this buffer is in the SKB, this is an illegal transformation.

Once you put something in front of skb->data, it's fair game
for other things to write over that buffer area with a pushed
packet header of their own.

The only legal way to fix this is to completely copy the packet,
headers and all, at the input site.

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Fri, 25 Jan 2008, John W. Linville wrote:
> 
> Quoth Herbert Xu:
> 
> "OK.  Let me clarify this a bit more.  We require at least one
> of the following rules to be met:
> 
> * the IPv4/IPv6 header is aligned by 8 bytes on reception;
> * or the platform provides unaligned exception handlers.

Ok, so the wireless stack currently does neither. It warns about 
lack of 4-byte alignment (not 8), and it does so for everything.

> That puts mac80211 in an awkward position.  It is not architecture
> code, so it can't make any assumptions about what is or isn't OK.
> So, we need to present aligned data to the network stack.

We can *easily* just have a "CONFIG_EXPENSIVE_UNALIGNED" thing, and force 
architectures to set that, and then just have the mac80211 code re-align 
the packet as required if it is set.

Or you guys could ask the network people to do that at an even higher 
level.

> We could put the alignment onus on mac80211, but this has proven to be
> very solvable at (near?) zero cost by all the other drivers.

>From personal experience, I would not be in the least surprised if there 
are DMA engines that simply cannot even do non-aligned DMA's.

And from a performance standpoint, it's also very possible that unaligned 
DMA accesses (if they end up being done as such by a stupid DMA engine) 
are more expensive than unaligned CPU data.

			Linus

Re: Linux 2.6.24-rc7

[David Miller]

From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 25 Jan 2008 12:28:22 -0800 (PST)

[ Why do you guys have to have a thread like this when
  I'm on a plane for 18 hours :-) ]

> > That puts mac80211 in an awkward position.  It is not architecture
> > code, so it can't make any assumptions about what is or isn't OK.
> > So, we need to present aligned data to the network stack.
> 
> We can *easily* just have a "CONFIG_EXPENSIVE_UNALIGNED" thing, and force 
> architectures to set that, and then just have the mac80211 code re-align 
> the packet as required if it is set.
> 
> Or you guys could ask the network people to do that at an even higher 
> level.

This is pseudo-encoded into many drivers which have trouble
receiving into "aligned for IP stack" RX buffers.  They
copy in such cases, but the existing test is a pile or
arch ifdefs.

Those should definitely be transformed into something centralized
like the EXPENSIVE_UNAIGNED setting you suggest.

> And from a performance standpoint, it's also very possible that unaligned 
> DMA accesses (if they end up being done as such by a stupid DMA engine) 
> are more expensive than unaligned CPU data.

Not if it traps.

For powerpc it does win, because they don't trap on
unaligned accesses and the DMA cost is for non-cacheline
transfers is exhorbitant (not just large).

Now, practically speaking, sparc64 emits warnings when any
unaligned trap is taken.  I test the networking a lot and I
know of only one obscure case in the IPSEC interface with
userspace over netlink where I see it ever occur.

It is so much easier to make the 4-byte alignment thing an
invariant at one place, top-most packet input, then pepper
the whole stack with all kinds of packed markings and
get_unaligned() and whatnot.  And from my experience in sparc64
it's totally unnecessary and it will only add tons of overhead.

We could even move the check and the copy out of the drivers
and into the top-level packet input.

That would be a double win, things would always work and not
trap, but also drivers could still optimize cases where aspects
of hardware behavior would allow avoiding the unaligned cases
better on a driver-local level.

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Sat, 26 Jan 2008, David Miller wrote:
> 
> We could even move the check and the copy out of the drivers
> and into the top-level packet input.

Hallelujah! Exactly.

> That would be a double win, things would always work and not
> trap, but also drivers could still optimize cases where aspects
> of hardware behavior would allow avoiding the unaligned cases
> better on a driver-local level.

Absolutely. Even on x86 and PowerPC, even if the actual "memmove()" 
doesn't take place, a driver that *can* make the packet data naturally 
aligned will want to do so just for simple performance reasons.

But we shouldn't make up stupid rules like "network drivers *have* to 
align packets correctly", simply because such rules may not make sense to 
the driver writer. If the hardware simply cannot do it, or has some 
horrible performance behaviour when it does so, it's stupid to tell a 
driver that it has to do it.

			Linus

Re: Linux 2.6.24-rc7

[Jeff Garzik]

Linus Torvalds wrote:
> But we shouldn't make up stupid rules like "network drivers *have* to 
> align packets correctly", simply because such rules may not make sense to 
> the driver writer. If the hardware simply cannot do it, or has some 
> horrible performance behaviour when it does so, it's stupid to tell a 
> driver that it has to do it.


<shrug>  seems like it should be possible to have an arch 
copy-and-align-if-necessary hook at the point of packet reception 
(netif_rx or netif_receive_skb).

And it would certainly be a nice cleanup to move all those driver 
implementations of rx_copybreak into common code.

But ultimately the driver knows the hardware (alignment requirements, RX 
skb allocation details) best, so by definition the low-level driver must 
communicate that information /somehow/.

That data may be communicated implicitly, sure:  maybe the 
aforementioned arch hook could simply look at the alignment of the skb's 
data, and make decision based on that (the driver still, by definition, 
ultimately controls RX skb allocation, alignment, and DMA boundaries and 
mappings)

It would be nice to stop maintaining code like the following in 
drivers/net/tulip/tulip_core.c:

> /* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
> #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
>         || defined(CONFIG_SPARC) || defined(__ia64__) \
>         || defined(__sh__) || defined(__mips__)
> static int rx_copybreak = 1518;
> #else
> static int rx_copybreak = 100;
> #endif

The driver passes a lot of information implicitly to the net stack 
simply via its "style" of allocation and mapping.

Its really a question of where you want to pay the cost of unaligned 
accesses, and how much is too much.  If the data is going to be memcpy'd 
to userspace or another buffer almost immediately, maybe we don't even 
care, even on non-x86.

Never know until you bench, I guess...

	Jeff

Re: Linux 2.6.24-rc7

[David Miller]

From: Jeff Garzik <jeff@garzik.org>
Date: Sun, 27 Jan 2008 02:16:00 -0500

> It would be nice to stop maintaining code like the following in 
> drivers/net/tulip/tulip_core.c:
> 
> > /* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
> > #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
> >         || defined(CONFIG_SPARC) || defined(__ia64__) \
> >         || defined(__sh__) || defined(__mips__)
> > static int rx_copybreak = 1518;
> > #else
> > static int rx_copybreak = 100;
> > #endif
> 
> The driver passes a lot of information implicitly to the net stack 
> simply via its "style" of allocation and mapping.

I just want to note in passing that we should remember that
there is a secoondary reason this copy-break logic exists
in the drivers.

When a reeived packet is attached to, and charged to, a socket,
we account the real amount of memory the SKB has allocated to it.

This means if the driver allocates full MTU sized frames for the
device to DMA into, we can cause unintended problems for passing
that packet directly in if there is only say 100 bytes of data.

The socket gets charged for a full MTU's amount of memory instead
of something more on the order of 100 bytes :-)

In fact that is the original reason all of these things exists,
it was just simple to extend it to handle alignment cases too.

Anyways, once we put the logic for unaligned handling into a
centralized location the above can now evaluate to a constant,
or default to the lower value of 100.

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Sat, 26 Jan 2008, David Miller wrote:
>
> The socket gets charged for a full MTU's amount of memory instead
> of something more on the order of 100 bytes :-)
> 
> In fact that is the original reason all of these things exists,
> it was just simple to extend it to handle alignment cases too.
> 
> Anyways, once we put the logic for unaligned handling into a
> centralized location the above can now evaluate to a constant,
> or default to the lower value of 100.

Wouldn't it be nice to just handle the MTU memory accounting issue at the 
network level too?

Make the rule simply be:

 - if the packet allocation is *much* bigger than the packet length 
   itself (eg 20-byte IP packet bytes in a 1536-byte allocation),
OR
 - if the packet data is badly aligned AND (packet is small and can be 
   just moved in place OR architecture requires alignment)

then copy the packet data into a new allocation (or preferably reuse the 
old allocation if the size is appropriate and you can tell from the 
refcount that nobody else has a pointer to it - I forget the exact rules 
for this all).

The fact that the new allocation would be aligned is obviously one of the 
benefits, but as you point out, it's not the only one.

			Linus

Re: Linux 2.6.24-rc7

[David Miller]

From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sat, 26 Jan 2008 23:54:18 -0800 (PST)

> Wouldn't it be nice to just handle the MTU memory accounting issue at the 
> network level too?

If the driver does it, it can immediately recycle the packet back into
the RX ring without all the overhead of freeing it and then allocating
it all over again.

It can also avoid all of the DMA map/unmap operations as well.
(you can copy and entire packet in the time a PIO operation
 to some of these IOMMU chips can take)

Moving all of this into netif_receive_skb() would be great for
centralization of logic, but I would not advocate it specifically
because it makes the drivers etc. do a lot of wasteful work.

Re: Linux 2.6.24-rc7

[Jeff Garzik]

Linus Torvalds wrote:
> 
> On Fri, 25 Jan 2008, Michael Buesch wrote:
>> The problem is _not_ the wireless header access, but the alignment of the embedded
>> protocol stack, if the header does not have a size aligned to 4.
>> Do we want to clutter the whole networking stack below wireless with
>> get_unaligned() or attribute(packed) or something like that?
> 
> That's what all the other protocols do, isn't it?
> 
> For example, on PowerPC, NET_IP_ALIGN is 0 - explicitly so that the *dma* 
> from the card should be aligned, even if that in turn means that the IP 
> payload itself is then just two-byte aligned rather than word-aligned 
> (14-byte ethernet headers and all that).
> 
> [ Side note - I _used_ to know the networking code. That was about eight 
>   to ten years ago. I'm really happy having a maintainer for it and not 
>   having to know all the details any more, so maybe things have changed. ]
> 
> I do think that we generally should try to make the drivers do as little 
> complex stuff as humanly possible, and expect as little from hardware (and 
> firmware counts in that group) as we can. If some higher-level thing 
> really needs things aligned in order to not have to have lots of ugly 
> code, it should generally extract that alignment itself.

Actually...  grep for rx_copybreak in networking drivers.

For certain ethernet NIC hardware, given standard packet headers, your 
data will always be unaligned, which -does- have a cost, even on Intel. 
  On such hardware, this is required because the RX packet must start on 
a 32-bit (sometimes 64-bit) DMA boundary.

Since RX SKBs are pre-allocated, we use the driver-wide 'rx_copybreak' 
variable to determine the point at which an unaligned packet is painful 
enough that we should copy into a newly allocated, properly aligned skb 
(NET_IP_ALIGN, etc.)

Sane architectures can set rx_copybreak to MTU size.  Other 
architectures (at compile time) set the rx_copybreak default to 
something smaller.

	Jeff

Re: Linux 2.6.24-rc7

[David Miller]

From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 25 Jan 2008 11:07:47 -0800 (PST)

> 
> 
> On Fri, 25 Jan 2008, Michael Buesch wrote:
> > 
> > The problem is _not_ the wireless header access, but the alignment of the embedded
> > protocol stack, if the header does not have a size aligned to 4.
> > Do we want to clutter the whole networking stack below wireless with
> > get_unaligned() or attribute(packed) or something like that?
> 
> That's what all the other protocols do, isn't it?

No.

> For example, on PowerPC, NET_IP_ALIGN is 0 - explicitly so that the *dma* 
> from the card should be aligned, even if that in turn means that the IP 
> payload itself is then just two-byte aligned rather than word-aligned 
> (14-byte ethernet headers and all that).

PowerPC handles unaligned accesses transparently, so it is safe
for them to make this setting.

It would not work out on sparc64 for example.

What happens in practice is that the drivers provide something
reasonably aligned for IPV4 headers.  That's why we don't mark the
IPV4 header structure as packed and that's why we don't have to use
get_unaligned() to dereference the 32-bit addresses in there.

So you'll see drivers for chips that have to 64-byte align the
ethernet header in the RX packet for whatever reason, simply
copy into a fresh buffer on receive.

Some drivers do this only platforms where unalign accesses trap or
simply do not work.

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Sat, 26 Jan 2008, David Miller wrote:
> 
> PowerPC handles unaligned accesses transparently, so it is safe
> for them to make this setting.

.. as does x86. Better than PowerPC, btw.

> It would not work out on sparc64 for example.

Right. Which is why different architectures should do different things, 
and which is why this should absolutely NOT be a driver issue. The driver 
should do what is natural to it.

If giving aligned data is reasonable, then obviously the driver should be 
striving for that, since regardless of architecture, alignment will never 
HURT the CPU.

But you seem to be totally ignoring people when they tell you that the 
hardware cannot necessarily do unaligned DMA well, or at all.

We've had that with disk controllers that simply *cannot* do DMA at less 
than 4-byte alignment, and where anything else has to be either done in 
software with PIO, or by memcpy.

You've also had Intel engineers tell you that the actual wireless stuff 
isn't just "firmware" - everybody who claims that this is an easy fix from 
Intel apparently has just been outright *lying*.

> So you'll see drivers for chips that have to 64-byte align the
> ethernet header in the RX packet for whatever reason, simply
> copy into a fresh buffer on receive.
> 
> Some drivers do this only platforms where unalign accesses trap or
> simply do not work.

.. and can't you see that this is STUPID?

Honestly, now, David - take a step back, and allow yourself to think about 
the issue. You have the following undeniable FACTS:

 - some hardware only does certain DMA alignment. This is a FACT. Treat it 
   as such, instead of whining about how Intel alledgely could easily fix 
   it.

   Quite frankly, I've been disgusted by people who say that it's "easy to 
   fix firmware". It's not. It then turns out that Intel people actually 
   step up and tell you that it's not even a firmware issue, are you now 
   going to say "It's easy to fix hardware - just a few lines of RTL"?

   So instead of this idiotic whining about "easy to fix firmware" that 
   turned out to be just total ignorance, how about the people who made 
   that claim step up and admit that (a) apparently not true, but also (b) 
   even if it had been "just" firmware, that was a totally idiotic claim 
   to begin with, since it's never been a valid excuse anyway!

And once you admit that first part ("some hardware will have different 
aligment requirements than the network stack has"), go on to the OBVIOUS 
secont step, which is to realize two other undeniable truths:

 - requiring individual drivers to do something in every driver is stupid 
   if it all boils down to something that could be done in *one* place 
   (the network stack entry).

   This is so obviously true that I really cannot see why you don't seem 
   to accept this. Drivers are hard enough to write as-is, and we want to 
   make driver writers have to worry as little as possible about things 
   like this.

 - The above is *doubly* true when it's simply not the case that "drivers 
   should always align packets to X bytes".

   Many CPU's handle unaligned accesses with little or no cost at all. 
   Most x86 chips have absolutely *zero* cost for an unaigned access that 
   doesn't cross a cache access boundary (often 8 bytes, these days I 
   think it's 16), and even when it requires crossing the natural internal 
   cache access bus width, it's usually not that high.

In other words, what you ask drivers to do is to not just create extra 
work for them, but create extra work for them in ways that aren't even 
obvious or relevant to most driver writers. Because on many architectures, 
they are better off *not* aligining things.

End result? When Intel writes a driver, they do it for the CPU 
architecture they care about. Which does *not* have the idiotic unaligned 
access problems that sparc has. So they do what makes sense to them, and I 
reall ycannot blame them for it.

So there's a very simple solution to this all: just make the entry to the 
networking layer re-align thing if required. In *one* single well-tested 
place. One that can do some smart things, like decide that re-aligning 
small packets may make sense even on architectures that don't have 
problems with unaligned accesses, just because the packet fits in one 
cacheline anyway.

That way al drivers can do what is best for *them*, and not have to worry. 
Yes, they'd like to align things naturally (in order to avoid the cost of 
the memcp()), but you don't create unnecessary and *stupid* work for them.

			Linus

Re: Linux 2.6.24-rc7

[David Miller]

From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 25 Jan 2008 10:22:13 -0800 (PST)

> With ethernet, there were chips that could only do DMA at certain
> alignments etc, together with various other headers being involved,
> making it impossible to require alignment without memcpy(), and I
> don't think we've had any issues there.

Yes, we could do a copy in the input path in the Intel drivers.

But then Intel is going to say "see it's fixed" and will never make
the 2 or 3 line fix to their firmware necessary to cure this
efficiently on all platforms.

To be honest I am in the camp of putting pressure on people
to do the right thing, and Intel fixing their firmware is
definitely the right thing to do here especially since it
is so easy for them to do so.

As for the "get another maintainer to step up" argument, nobody has
access to Intel's firmware source besides them, otherwise I can assure
you people would jump out of the woodwork by the handful to take over
several of Intel's drivers.

Many people are un-buggering up the Intel driver source bits that
people do have access to and can edit.

Intel controls the situation and that's just the way they like it.
It's not really a community thing because of the firmware issue,
so it's not possible to apply the same sort of "if you don't like
it, stand up and do the work to fix it" arguments.

We would if we could :-)

FWIW, I do agree with cpus should do unaligned accesses transparently,
without traps.  But unfortunately I don't think all the cell phones,
wireless access points, building key-card entry systems and the like
are going to switch over to x86 any time soon.  And in a scary sense
this is becomming the dominant space for Linux by at least some
measures :-)

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Friday 25 January 2008 17:43:09 Linus Torvalds wrote:
> 
> On Fri, 25 Jan 2008, Michael Buesch wrote:
> > 
> > If we are talking about what's sane or not...
> > It's trivial to fix this in the firmware, like sane vendors like
> > Broadcom do.
> 
> You just showed your total disregard for any sanity by calling broadcom 
> "sane".

The Broadcom firmware _is_ mostly sane. That's what I am saying.
I wasn't talking about Broadcom's support or anything else.

> > Architectures that can't do unaligned access are heavily used in
> > wireless embedded routers. So we are not going to pay a huge
> > price there so just one vendor doesn't have to fix his firmware.
> 
> .. and you also showed that you didn't even read my email and the options 
> I outlined. The fact is, the Intel wireless chipset only works with x86 
> CPU's. There is absolutely zero "price" on crap CPU's, because they are 
> simply not relevant to this driver.

I'm not sure what's so hard about adding this trivial fix to the firmware.
The _fact_ that this warning triggered for lots of drivers means that
developers are not aware of the problem. So why should we go on hiding bugs
that are _trivial_ to fix?

I absolutely hate the attitude "The problem does not happen on most
of the stuff intel uses, so they don't need to fix this". So, I also don't
need to fix bugs in code I wrote, just because I don't have such use
scenario? That would be great. I'd know thousands of lines of b43 code
that I'd like to immediately remove then.
That's just not how it works in the real world.

We should write the kernel and drivers as portable as possible. We left the
old days when linux only ran on an i386. ;)

And to say it again, this is really really trivial to fix. So why remove
a sanity check that tells you about bugs in other drivers where it does
matter (because they are used on such weird architectures), just because one
vendor says "hey, doesn't matter for me"?

Adding the check to the driver is not an option, because most driver developers
are not aware of the issue. So they would not add this. They would just run
into weird issues and waste time debugging it.

If this was a hard to fix problem which would require changing lots of things,
ok. That would be OK to remove the sanity check then. But that's not the case.

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Fri, 25 Jan 2008, Michael Buesch wrote:
> 
> I'm not sure what's so hard about adding this trivial fix to the firmware.
> The _fact_ that this warning triggered for lots of drivers means that
> developers are not aware of the problem. So why should we go on hiding bugs
> that are _trivial_ to fix?

.. mainly because I don't think it's a bug in the network driver.

It really sounds like you're creating a warning for a bug in the wireless 
infrastructure, and then trying to blame the drivers that don't agree with 
that warning being valid in the first place.

> I absolutely hate the attitude "The problem does not happen on most
> of the stuff intel uses, so they don't need to fix this".

That's not *my* attitude at least.

My attitude is: CPU's that do unaligned accesses right are the *good* 
CPU's. We should encourage them, and put the onus of being crap on the 
ones that are crap, rather than penalizing the ones that aren't.

In other words, we should use "get_unaligned()".

		Linus

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Friday 25 January 2008 19:34:46 Linus Torvalds wrote:
> My attitude is: CPU's that do unaligned accesses right are the *good* 
> CPU's. We should encourage them, and put the onus of being crap on the 
> ones that are crap, rather than penalizing the ones that aren't.

I absolutely agree. But as this can get fixed with _no_ performance loss
at all inside of the firmware (and who if not intel can change stuff
in their firmware?), I think this warning is in fact valid.

> In other words, we should use "get_unaligned()".

So we should put get_unaligned() into the whole networking stack below
wireless and penalize everybody, even gigabit-ethernet?

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[Inaky Perez-Gonzalez]

On Friday 25 January 2008, Michael Buesch wrote:
> On Friday 25 January 2008 19:34:46 Linus Torvalds wrote:
> > My attitude is: CPU's that do unaligned accesses right are the *good* 
> > CPU's. We should encourage them, and put the onus of being crap on the 
> > ones that are crap, rather than penalizing the ones that aren't.
> 
> I absolutely agree. But as this can get fixed with _no_ performance loss
> at all inside of the firmware (and who if not intel can change stuff
> in their firmware?), I think this warning is in fact valid.

Well, you forgot the point that maybe it is not that simple to get such
a seemingly simple change into the firmware for a long list of reasons.

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Friday 25 January 2008 22:11:44 Inaky Perez-Gonzalez wrote:
> On Friday 25 January 2008, Michael Buesch wrote:
> > On Friday 25 January 2008 19:34:46 Linus Torvalds wrote:
> > > My attitude is: CPU's that do unaligned accesses right are the *good* 
> > > CPU's. We should encourage them, and put the onus of being crap on the 
> > > ones that are crap, rather than penalizing the ones that aren't.
> > 
> > I absolutely agree. But as this can get fixed with _no_ performance loss
> > at all inside of the firmware (and who if not intel can change stuff
> > in their firmware?), I think this warning is in fact valid.
> 
> Well, you forgot the point that maybe it is not that simple to get such
> a seemingly simple change into the firmware for a long list of reasons.

The reasons being?

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[Inaky Perez-Gonzalez]

On Friday 25 January 2008, Michael Buesch wrote:
> On Friday 25 January 2008 22:11:44 Inaky Perez-Gonzalez wrote:
> > On Friday 25 January 2008, Michael Buesch wrote:
> > > On Friday 25 January 2008 19:34:46 Linus Torvalds wrote:
> > > > My attitude is: CPU's that do unaligned accesses right are the *good* 
> > > > CPU's. We should encourage them, and put the onus of being crap on the 
> > > > ones that are crap, rather than penalizing the ones that aren't.
> > > 
> > > I absolutely agree. But as this can get fixed with _no_ performance loss
> > > at all inside of the firmware (and who if not intel can change stuff
> > > in their firmware?), I think this warning is in fact valid.
> > 
> > Well, you forgot the point that maybe it is not that simple to get such
> > a seemingly simple change into the firmware for a long list of reasons.
> 
> The reasons being?

For example: want to ship new firmware, drivers *and* full validation and
certification for a product that is already completed just to satisfy a 
fraction of a market which is not part of the designed target?

Do you know how much money that costs?

I'll be happy to eat my words without any ketchup and mustard if it happens,
btw, but I don't think it will [and I am speaking for myself, not for Intel,
when saying this].

Re: Linux 2.6.24-rc7

[David Miller]

From: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Date: Fri, 25 Jan 2008 13:28:35 -0800

> For example: want to ship new firmware, drivers *and* full validation and
> certification for a product that is already completed just to satisfy a 
> fraction of a market which is not part of the designed target?
> 
> Do you know how much money that costs?

I'm glad you guys are the only one's with access to the firmware
source, thus enduring that you can constantly come up with reasons
like this in order to not have to fix the problem.

You know that if the source were available, the community would have
fixed the bug ages ago.

But the situation is entirely in Intel's control which is surely
exactly the way they like it.

Re: Linux 2.6.24-rc7

[Luis R. Rodriguez]

On Jan 26, 2008 8:42 AM, David Miller <davem@davemloft.net> wrote:
> From: Inaky Perez-Gonzalez <inaky@linux.intel.com>
> Date: Fri, 25 Jan 2008 13:28:35 -0800
>
> > For example: want to ship new firmware, drivers *and* full validation and
> > certification for a product that is already completed just to satisfy a
> > fraction of a market which is not part of the designed target?
> >
> > Do you know how much money that costs?
>
> I'm glad you guys are the only one's with access to the firmware
> source, thus enduring that you can constantly come up with reasons
> like this in order to not have to fix the problem.
>
> You know that if the source were available, the community would have
> fixed the bug ages ago.
>
> But the situation is entirely in Intel's control which is surely
> exactly the way they like it.

IMO the real problem is not Intel not wanting to free the firmware,
but that legal says they can't. The reason why legal would tell them
that is due to the attempt to comply to out-of-date regulatory laws
which currently exist in different and sometimes in most countries. At
least within the US, for example, the laws dealing with new devices
like SDRs [1] don't say you can't use FOSS but "warn that the
certification will be less likely to be granted if the manufacturer
relies 'wholly' on FOSS in building the device" [2]. IMO these laws
are just new and regulatory agencies just have  no good ideas as to
how to properly regulate these type of devices properly yet. My
current stance on this issue is to have regulatory bodies shift
liability to the user for use of unsupported software. Changing
regulatory bodies to embrace this idea will take a while so in the
meantime we have to deal with what we have and that is wireless cards
coming close to being SDRs but still being certified under part 15
rules and corporate legal teams just wanting to play it safe.

So all this is in general is not about vendors not wanting to support
us. Its simply the fear uncertainty and doubt game, but the stakes are
pretty high for vendors. In the long run my hope is we can get an
alliance of wireless vendors going to eventually make a proposal to
different legislative bodies to consider changing certification
requirements for the sake of advancing these technologies with the
community even using FOSS.

[1] http://en.wikipedia.org/wiki/Software_radio
[2] http://www.softwarefreedom.org/resources/2007/fcc-sdr-whitepaper.html

  Luis

Re: Linux 2.6.24-rc7

[Inaky Perez-Gonzalez]

On Saturday 26 January 2008, David Miller wrote:
> From: Inaky Perez-Gonzalez <inaky@linux.intel.com>
> Date: Fri, 25 Jan 2008 13:28:35 -0800
> 
> > For example: want to ship new firmware, drivers *and* full validation and
> > certification for a product that is already completed just to satisfy a 
> > fraction of a market which is not part of the designed target?
> > 
> > Do you know how much money that costs?
> 
> I'm glad you guys are the only one's with access to the firmware
> source, thus enduring that you can constantly come up with reasons
> like this in order to not have to fix the problem.

At the risk of falling into your game, let me reiterate what I said 
above, as you don't seem to have  taken it into acount:

   want to ship new firmware, drivers *and* full validation and
   certification for a product that is already completed just to satisfy a 
   fraction of a market which is not part of the designed target?

   Do you know how much money that costs?

Maybe there is somewhere someone willing to pony up all the the money 
needed to get all that started and done, but we are not in that position,
so in those cases, we need to do some kind of software arrangement.

But even still, cref to some of Linus's message in this thread: that doesn't 
mean  people would use it. Workaround broken stuff because it is there already
and ask for the vendor to fix things.

We listen, participate, release code and we try hard to get the stuff right 
in current releases when doable, in future as much as possible. It doesn't 
help anyone when you just go about ripping us senseless.

> You know that if the source were available, the community would have
> fixed the bug ages ago.
>
> But the situation is entirely in Intel's control which is surely
> exactly the way they like it.

Do you have the (open) source to any wireless card firmware? I'd be 
curious to know, because I (personally) don't know how can you do an 
open source firmware for a software defined radio without the FCC 
denying you a license. No license, no product. No product, no need to
even have this discussion... :)

Re: Linux 2.6.24-rc7

[John W. Linville]

On Fri, Jan 25, 2008 at 10:21:07PM +0100, Michael Buesch wrote:
> On Friday 25 January 2008 22:11:44 Inaky Perez-Gonzalez wrote:
> > On Friday 25 January 2008, Michael Buesch wrote:
> > > On Friday 25 January 2008 19:34:46 Linus Torvalds wrote:
> > > > My attitude is: CPU's that do unaligned accesses right are the *good* 
> > > > CPU's. We should encourage them, and put the onus of being crap on the 
> > > > ones that are crap, rather than penalizing the ones that aren't.
> > > 
> > > I absolutely agree. But as this can get fixed with _no_ performance loss
> > > at all inside of the firmware (and who if not intel can change stuff
> > > in their firmware?), I think this warning is in fact valid.
> > 
> > Well, you forgot the point that maybe it is not that simple to get such
> > a seemingly simple change into the firmware for a long list of reasons.
> 
> The reasons being?

Firmware certification is expensive.

Plus it is a bit unfair to ask for firmware changes just because the
vendor is actually engaged with us.  If this were Broadcom or Zydas
firmware we would have little recourse other than to accept it or
fix it in the driver or stack.

John
-- 
John W. Linville
linville@tuxdriver.com

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Friday 25 January 2008 22:46:26 John W. Linville wrote:
> On Fri, Jan 25, 2008 at 10:21:07PM +0100, Michael Buesch wrote:
> > On Friday 25 January 2008 22:11:44 Inaky Perez-Gonzalez wrote:
> > > On Friday 25 January 2008, Michael Buesch wrote:
> > > > On Friday 25 January 2008 19:34:46 Linus Torvalds wrote:
> > > > > My attitude is: CPU's that do unaligned accesses right are the *good* 
> > > > > CPU's. We should encourage them, and put the onus of being crap on the 
> > > > > ones that are crap, rather than penalizing the ones that aren't.
> > > > 
> > > > I absolutely agree. But as this can get fixed with _no_ performance loss
> > > > at all inside of the firmware (and who if not intel can change stuff
> > > > in their firmware?), I think this warning is in fact valid.
> > > 
> > > Well, you forgot the point that maybe it is not that simple to get such
> > > a seemingly simple change into the firmware for a long list of reasons.
> > 
> > The reasons being?
> 
> Firmware certification is expensive.
> 
> Plus it is a bit unfair to ask for firmware changes just because the
> vendor is actually engaged with us.  If this were Broadcom or Zydas
> firmware we would have little recourse other than to accept it or
> fix it in the driver or stack.

Well, we could patch broadcom's firmware ;)

But anyway.
So what about removing the WARN_ON() and replacing it by
a conditional memmove then?
I mean, the wireless hardware I care about already is sane or fixed.
So if intel doesn't want to support this kind of machines, I'd say in
the end it is OK and we should not care about it at all. I mean, nobody
is forced to buy an intel card to use on such a machine.

I must say I don't care much about intel's customers that want to run
intel wireless in a machine that can't do unaligned access, if intel itself
doesn't care at all about them. In the end it is _intel's_ performance
problem and not ours.

The problem with that is that the warning goes away and _future_ drivers
will probably run into this performance problem and don't know about.

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[Tomas Winkler]

On Jan 25, 2008 11:46 PM, John W. Linville <linville@tuxdriver.com> wrote:
> On Fri, Jan 25, 2008 at 10:21:07PM +0100, Michael Buesch wrote:
> > On Friday 25 January 2008 22:11:44 Inaky Perez-Gonzalez wrote:
> > > On Friday 25 January 2008, Michael Buesch wrote:
> > > > On Friday 25 January 2008 19:34:46 Linus Torvalds wrote:
> > > > > My attitude is: CPU's that do unaligned accesses right are the *good*
> > > > > CPU's. We should encourage them, and put the onus of being crap on the
> > > > > ones that are crap, rather than penalizing the ones that aren't.
> > > >
> > > > I absolutely agree. But as this can get fixed with _no_ performance loss
> > > > at all inside of the firmware (and who if not intel can change stuff
> > > > in their firmware?), I think this warning is in fact valid.
> > >
> > > Well, you forgot the point that maybe it is not that simple to get such
> > > a seemingly simple change into the firmware for a long list of reasons.
> >
> > The reasons being?
>
> Firmware certification is expensive.
>
> Plus it is a bit unfair to ask for firmware changes just because the
> vendor is actually engaged with us.  If this were Broadcom or Zydas
> firmware we would have little recourse other than to accept it or
> fix it in the driver or stack.
>
> John
> --
> John W. Linville
> linville@tuxdriver.com
>

Sorry for getting late into this conversation till now I was enjoying
my weekend :)

We are definitely not ignoring this issue. We are discussing this at
Intel and this for sure will be fixed in next generation HW.  For now
we are trying to find some remedy to this problem. The big problem we
have that 11n handling is HW assisted and it's really hard to do
something about it in the FW level for 11n cards. This is not
something that we fix over night if at all. The truth is these cards
never dreamed to be run on other CPUs then Intel so the morning  is
hard :)

I would suggest to go for conditional copying on platforms that cannot
handle unaligned for these platforms  we have to probably disable 11n
though.
Tomas


> -
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Re: Linux 2.6.24-rc7

[David Miller]

From: "John W. Linville" <linville@tuxdriver.com>
Date: Fri, 25 Jan 2008 16:46:26 -0500

> Plus it is a bit unfair to ask for firmware changes just because the
> vendor is actually engaged with us.  If this were Broadcom or Zydas
> firmware we would have little recourse other than to accept it or
> fix it in the driver or stack.

It's funny that you mention Broadcom, because on the ethernet
side exactly because they engage with us I've been able to
get them to add things that make sense to their gigabit firmware
and even the hardware itself.

It's the only reason Broadcom's gigabit and faster chips have
the one-shot MSI feature, because I asked them to add it because
it makes NAPI significantly faster.

Re: Linux 2.6.24-rc7

[Guy Cohen]

On 1/25/08, Michael Buesch <mb@bu3sch.de> wrote:
> On Friday 25 January 2008 22:11:44 Inaky Perez-Gonzalez wrote:
> > Well, you forgot the point that maybe it is not that simple to get such
> > a seemingly simple change into the firmware for a long list of reasons.
>
> The reasons being?

Please stop being a smug. We are not going to expose here 4965's HW or
FW architecture. [did you think about the theoretical possibility that
240Mbps HW may handle its RX data path not purely by FW SW?].
Currently we don't have any magic solution for that.

The right solution here is as Linus suggested. Align the data for CPUs
that can't handle unaligned access _only_.

Guy.

>
> --
> Greetings Michael.

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Fri, 25 Jan 2008, Michael Buesch wrote:
> > Well, you forgot the point that maybe it is not that simple to get such
> > a seemingly simple change into the firmware for a long list of reasons.
> 
> The reasons being?

.. the reason being that people just expect existing firmware to work, for 
example.

The point being, even if a newer firmware was _available_, people wouldn't 
necessarily run with it.

We do *not* accept "upgrade the BIOS" as an answer to broken BIOSes 
either. We work around BIOS limitations.

There can easily be other issues too. The DMA engine literally might only 
do word-aligned transfers. Or other operating systems have different rules 
from Linux, and the firmware is designed for those other systems.

Realistically, if it works with Windows, and I was a hardware team, and 
the Linux people were whining about it, I'd feel perfectly fine in saying 
"you're the buggy ones, we work fine".

So no, whining about hardware or firmware features isn't really very 
productive. You take what you get.

				Linus

Re: Linux 2.6.24-rc7

[David Miller]

From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 25 Jan 2008 13:54:31 -0800 (PST)

> 
> 
> On Fri, 25 Jan 2008, Michael Buesch wrote:
> > > Well, you forgot the point that maybe it is not that simple to get such
> > > a seemingly simple change into the firmware for a long list of reasons.
> > 
> > The reasons being?
> 
> .. the reason being that people just expect existing firmware to work, for 
> example.
> 
> The point being, even if a newer firmware was _available_, people wouldn't 
> necessarily run with it.

How differently would the situation be handled if the firmware
source were available and changeable by anyone in the community?

This situation therefore only exists because it is not available
to anyone to hack on.

Drivers like the aic7xxx and sym53c8xx scsi ones come with scripts
and other firmware that we build, if a bug were found in it we
would simply fix it instead of bastardizing the C portions of
the driver to fit the limitations of the firmware.

The firmware is source, just that in this case we don't have
access to a usable form of it, and the entity that does chooses
to not band over a little bit to be cooperative.

Re: Linux 2.6.24-rc7

[John W. Linville]

On Fri, Jan 25, 2008 at 07:21:48PM +0100, Michael Buesch wrote:

> So why remove
> a sanity check that tells you about bugs in other drivers where it does
> matter (because they are used on such weird architectures), just because one
> vendor says "hey, doesn't matter for me"?

This is a good point.  If people were already using a driver on an
oddball architecture, then we would get _those_ warnings (as we did
when someone plugged a zd1211 device into their sparc box).  The point
of the warning is/was to point-out the problem to developers running
on mainstream architecutres so that they could fix these problems
rather than foisting them on some poor schmuck years from now trying
to build an SPARC-based AP.  (Hey, it could happen...)

John
-- 
John W. Linville
linville@tuxdriver.com

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Thursday 24 January 2008 21:27:03 Linus Torvalds wrote:
> 
> On Tue, 8 Jan 2008, Michael Buesch wrote:
> > > >
> > > > Can you check if that is the
> > > > WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
> > > > in rx.c line 1486?
> > 
> > Yes fine.
> > Patches are on their way. Ignore the warning for now. It is harmless.
> 
> I don't think this ever got fixed. 

This was fixed in the drivers. A fix for zd1211rw got in and for
the RTL wireless drivers. Did any other driver trigger this warning?

> I don't see any alternative but just uncomment that bogus warning, because 
> it's otherwise going to just cause way more noise than it's worth. It's 
> apparently known to developers, and as such it's worthless in the source 
> code except as a way to make poor users worry.
> 
> It's been in the top oops/warnings report for the last three weeks, and I 
> haven't gotten any patches for it, so I'm a bit grumpy. What's the point 
> of having a WARN_ON() if nobody involved *does* anything about it?

It was already fixed before this bugreport, in this mail thread
you are replying to, was sent.
We do have a long maintainers chain for wireless
driver developers -> john linville -> netdev -> you
So it can cause some delay sometimes, but I'm pretty sure the fixes
should have hit mainline by now. I can recheck that if you desire.

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[Linus Torvalds]

On Thu, 24 Jan 2008, Michael Buesch wrote:
> 
> This was fixed in the drivers. A fix for zd1211rw got in and for
> the RTL wireless drivers. Did any other driver trigger this warning?

The Intel driver does, and was tagged as the main culprit in at least the 
pseudo-automated oops reports that Arjan sends to lkml.

> So it can cause some delay sometimes, but I'm pretty sure the fixes
> should have hit mainline by now. I can recheck that if you desire.

I'm 100% sure they haven't, since I could trigger this warning as of the 
tree an hour ago (and I have since reverted it, so now I can't). That's 
what reminded me - doing a final round of "test on the machines I have 
available" before releasing 2.6.24.

			Linus

Re: Linux 2.6.24-rc7

[Michael Buesch]

On Thursday 24 January 2008 23:26:41 Linus Torvalds wrote:
> 
> On Thu, 24 Jan 2008, Michael Buesch wrote:
> > 
> > This was fixed in the drivers. A fix for zd1211rw got in and for
> > the RTL wireless drivers. Did any other driver trigger this warning?
> 
> The Intel driver does, and was tagged as the main culprit in at least the 
> pseudo-automated oops reports that Arjan sends to lkml.

Oh, well. Intel... hm.
They basically refused to fix it by now.
Please don't blame us mainline developers for this.
We _did_ immediately care to fix our drivers. So the only driver
that is actually not fixed is the intel stuff, which is kind of
developed out of tree and only pushed from time to time.

I don't know why they didn't fix it, yet, but I guess it's low
priority for them, as it does not cause any problems on
intel CPUs.

> > So it can cause some delay sometimes, but I'm pretty sure the fixes
> > should have hit mainline by now. I can recheck that if you desire.
> 
> I'm 100% sure they haven't, since I could trigger this warning as of the 
> tree an hour ago (and I have since reverted it, so now I can't). That's 
> what reminded me - doing a final round of "test on the machines I have 
> available" before releasing 2.6.24.

I guess you tested with Intel wireless, right?

I'm sorry for the inconvenience anyway.
It's OK to revert this WARN_ON for the release kernel, as it does
only cause any problems on CPUs that can't do unaligned access.

-- 
Greetings Michael.

Re: Linux 2.6.24-rc7

[J.A. Magallón]

HI all...

On Sun, 6 Jan 2008 14:19:16 -0800 (PST), Linus Torvalds <torvalds@linux-foundation.org> wrote:

> 
> It's been two weeks since rc6, but let's face it, with xmas and new years 
> (and birthdays) in between, there hasn't actually been a lot of working 
> days, and the incremental patch from -rc6 is about half the size of the 
> one from rc5->rc6.
> 
> And I'll be charitable and claim it's because it's all stabilizing, and 
> not because we've all been in a drunken stupor over the holidays.
> 
> The shortlog (appended below) is short and fairly informative. It's all 
> really just a lot of rather small changes. The diffstat shows a lot of 
> one- and two-liners, with just a few drivers (and the Cell platform) 
> getting a bit more attention, and the SLUB support of /proc/slabinfo 
> showing up as a blip.
> 

With this kernel I'm getting frequent temporary freezes (system comes
back responsive after a minute or so...). I see this in dmesg:

ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ca/00:08:67:10:18/00:00:00:00:00/e2 tag 0 dma 4096 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: soft resetting link
ata3.00: configured for UDMA/133
ata3: EH complete
sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata4.00: cmd c8/00:08:ef:0b:c7/00:00:00:00:00/e7 tag 0 dma 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: soft resetting link
ata4.00: configured for UDMA/133
ata4: EH complete
sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

See this are two different drives, I doubt both drives have gone nuts
at the same time...

Controllers:
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
03:04.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) (rev 02)

Drives (sda is PATA, sd[bcd] are SATA, 
werewolf:~> lsscsi
[0:0:0:0]    disk    ATA      ST3120022A       3.06  /dev/sda
[0:0:1:0]    cd/dvd  HL-DT-ST DVDRAM GSA-H10N  JL12  /dev/sr0
[2:0:0:0]    disk    ATA      ST3200822AS      3.01  /dev/sdb
[3:0:0:0]    disk    ATA      MAXTOR STM332082 3.AA  /dev/sdc
[4:0:0:0]    disk    ATA      Maxtor 7Y250M0   YAR5  /dev/sdd
werewolf:~> df
Filesystem    Type    Size  Used Avail Use% Mounted on
/dev/sdb1     ext3     30G   11G   18G  38% /
/dev/sdb2     ext3    152G   71G   81G  47% /home
/dev/sdc1     ext3    294G   67G  212G  24% /home/store/media/music
/dev/sdd1     ext3    231G   42G  177G  20% /home/store/media/video
/dev/sda1     ext3    111G  887M  104G   1% /scratch


Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
ata1.00: ATA-6: ST3120022A, 3.06, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48 
ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL12, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      ST3120022A       3.06 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 0:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL12 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xc400 bmdma 0xd000 irq 16
ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xcc00 bmdma 0xd008 irq 16
ata3.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
ata3.00: 390721968 sectors, multi 16: LBA48 
ata3.00: configured for UDMA/133
ata4.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      ST3200822AS      3.01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 2:0:0:0: [sdb] Attached SCSI disk
scsi 3:0:0:0: Direct-Access     ATA      MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
...
sata_promise 0000:03:04.0: version 2.11
ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 23 (level, low) -> IRQ 17
scsi4 : sata_promise
scsi5 : sata_promise
scsi6 : sata_promise
ata5: SATA max UDMA/133 mmio m4096@0xf6026000 port 0xf6026200 irq 17
ata6: SATA max UDMA/133 mmio m4096@0xf6026000 port 0xf6026280 irq 17
ata7: PATA max UDMA/133 mmio m4096@0xf6026000 port 0xf6026300 irq 17
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATA-7: Maxtor 7Y250M0, YAR51EW0, max UDMA/133
ata5.00: 490234752 sectors, multi 0: LBA48 
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 4:0:0:0: Direct-Access     ATA      Maxtor 7Y250M0   YAR5 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] 490234752 512-byte hardware sectors (251000 MB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdd] 490234752 512-byte hardware sectors (251000 MB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 4:0:0:0: [sdd] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg4 type 0

--
J.A. Magallon <jamagallon()ono!com>     \               Software is like sex:
                                         \         It's better when it's free
Mandriva Linux release 2008.1 (Cooker) for i586
Linux 2.6.23-jam05 (gcc 4.2.2 20071128 (4.2.2-2mdv2008.1)) SMP PREEMPT

Re: Linux 2.6.24-rc7

[Avuton Olrich]

On Jan 7, 2008 4:50 PM, J.A. Magallón <jamagallon@ono.com> wrote:
> HI all...
>
> On Sun, 6 Jan 2008 14:19:16 -0800 (PST), Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> >
> > It's been two weeks since rc6, but let's face it, with xmas and new years
> > (and birthdays) in between, there hasn't actually been a lot of working
> > days, and the incremental patch from -rc6 is about half the size of the
> > one from rc5->rc6.
> With this kernel I'm getting frequent temporary freezes (system comes
> back responsive after a minute or so...). I see this in dmesg:
>
> ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata3.00: cmd ca/00:08:67:10:18/00:00:00:00:00/e2 tag 0 dma 4096 out
>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata3.00: status: { DRDY }
> ata3: soft resetting link
> ata3.00: configured for UDMA/133
> ata3: EH complete

Reminds me of my 2.6.24 regression bug:
http://bugzilla.kernel.org/show_bug.cgi?id=9393
-- 
avuton
--
 Anyone who quotes me in their sig is an idiot. -- Rusty Russell.

Re: Linux 2.6.24-rc7

[Tejun Heo]

J.A. Magallón wrote:
> HI all...
> 
> On Sun, 6 Jan 2008 14:19:16 -0800 (PST), Linus Torvalds <torvalds@linux-foundation.org> wrote:
> 
>> It's been two weeks since rc6, but let's face it, with xmas and new years 
>> (and birthdays) in between, there hasn't actually been a lot of working 
>> days, and the incremental patch from -rc6 is about half the size of the 
>> one from rc5->rc6.
>>
>> And I'll be charitable and claim it's because it's all stabilizing, and 
>> not because we've all been in a drunken stupor over the holidays.
>>
>> The shortlog (appended below) is short and fairly informative. It's all 
>> really just a lot of rather small changes. The diffstat shows a lot of 
>> one- and two-liners, with just a few drivers (and the Cell platform) 
>> getting a bit more attention, and the SLUB support of /proc/slabinfo 
>> showing up as a blip.
>>
> 
> With this kernel I'm getting frequent temporary freezes (system comes
> back responsive after a minute or so...). I see this in dmesg:
> 
> ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata3.00: cmd ca/00:08:67:10:18/00:00:00:00:00/e2 tag 0 dma 4096 out
>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata3.00: status: { DRDY }
> ata3: soft resetting link
> ata3.00: configured for UDMA/133
> ata3: EH complete
> sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
> sd 2:0:0:0: [sdb] Write Protect is off
> sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> 
> ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata4.00: cmd c8/00:08:ef:0b:c7/00:00:00:00:00/e7 tag 0 dma 4096 in
>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata4.00: status: { DRDY }
> ata4: soft resetting link
> ata4.00: configured for UDMA/133
> ata4: EH complete
> sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
> sd 3:0:0:0: [sdc] Write Protect is off
> sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> 
> See this are two different drives, I doubt both drives have gone nuts
> at the same time...

That's weird.  There hasn't been any related changes.  Does going back
to 2.6.24-rc6 fix the problem?

-- 
tejun

Re: Linux 2.6.24-rc7

[J.A. Magallón]

On Wed, 09 Jan 2008 10:56:02 +0900, Tejun Heo <htejun@gmail.com> wrote:

> J.A. Magallón wrote:
> > HI all...
> > 
> > On Sun, 6 Jan 2008 14:19:16 -0800 (PST), Linus Torvalds <torvalds@linux-foundation.org> wrote:
> > 
> >> It's been two weeks since rc6, but let's face it, with xmas and new years 
> >> (and birthdays) in between, there hasn't actually been a lot of working 
> >> days, and the incremental patch from -rc6 is about half the size of the 
> >> one from rc5->rc6.
> >>
> >> And I'll be charitable and claim it's because it's all stabilizing, and 
> >> not because we've all been in a drunken stupor over the holidays.
> >>
> >> The shortlog (appended below) is short and fairly informative. It's all 
> >> really just a lot of rather small changes. The diffstat shows a lot of 
> >> one- and two-liners, with just a few drivers (and the Cell platform) 
> >> getting a bit more attention, and the SLUB support of /proc/slabinfo 
> >> showing up as a blip.
> >>
> > 
> > With this kernel I'm getting frequent temporary freezes (system comes
> > back responsive after a minute or so...). I see this in dmesg:
> > 
> > ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> > ata3.00: cmd ca/00:08:67:10:18/00:00:00:00:00/e2 tag 0 dma 4096 out
> >          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> > ata3.00: status: { DRDY }
> > ata3: soft resetting link
> > ata3.00: configured for UDMA/133
> > ata3: EH complete
> > sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
> > sd 2:0:0:0: [sdb] Write Protect is off
> > sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> > sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > 
> > ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> > ata4.00: cmd c8/00:08:ef:0b:c7/00:00:00:00:00/e7 tag 0 dma 4096 in
> >          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> > ata4.00: status: { DRDY }
> > ata4: soft resetting link
> > ata4.00: configured for UDMA/133
> > ata4: EH complete
> > sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
> > sd 3:0:0:0: [sdc] Write Protect is off
> > sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> > sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > 
> > See this are two different drives, I doubt both drives have gone nuts
> > at the same time...
> 
> That's weird.  There hasn't been any related changes.  Does going back
> to 2.6.24-rc6 fix the problem?
> 

It reproduces also with 2.6.23.13.
Finally I think the problematic disk is sdc:

ICH5 PATA -> sda
ICH5 SATA0 -> sdb
ICH5 SATA1 -> sdc
Promise SATA -> sdd

The problem is that even I have commented out the entry for sdc in fstab,
the system is still giving me errors. An my guess is that errors in sdc makes
the ICH5 sata controller go nuts, and then I get errors also in sdb.
Just a couple questions...

- Can I say to ata_piix something like 'please, detect first SATA ports before
  ATA', so my system disk (sdb) becomes sda ?
- Can I say 'plz, ignore port 1', so it does not try to detect/start/spin sdc ?
  So I ban be sure it is the one to blame, before start to remove hardware...

TIA

--
J.A. Magallon <jamagallon()ono!com>     \               Software is like sex:
                                         \         It's better when it's free
Mandriva Linux release 2008.1 (Cooker) for i586
Linux 2.6.23-jam05 (gcc 4.2.2 20071128 (4.2.2-2mdv2008.1)) SMP PREEMPT

Re: Linux 2.6.24-rc7

[Tejun Heo]

Hi,

J.A. Magallón wrote:
> It reproduces also with 2.6.23.13.
> Finally I think the problematic disk is sdc:

Okay, then, it's less likely a regression and more likely a newly
developed hardware problem.

> ICH5 PATA -> sda
> ICH5 SATA0 -> sdb
> ICH5 SATA1 -> sdc
> Promise SATA -> sdd
> 
> The problem is that even I have commented out the entry for sdc in fstab,
> the system is still giving me errors. An my guess is that errors in sdc makes
> the ICH5 sata controller go nuts, and then I get errors also in sdb.
> Just a couple questions...

I've never seen ICHs or any other SATA controllers act that way.

> - Can I say to ata_piix something like 'please, detect first SATA ports before
>   ATA', so my system disk (sdb) becomes sda ?

You do that using LABEL, UUID or device ID.  Just run 'ls -l
/dev/disk/by-*/' and see the result.

> - Can I say 'plz, ignore port 1', so it does not try to detect/start/spin sdc ?
>   So I ban be sure it is the one to blame, before start to remove hardware...

Unfortunately not but you can boot into single mode where there's
nothing trying to access the disk without your explicit command and
verify access to each hard disk.

Hmm... You are seeing timeouts from multiple harddisks.  The first thing
I would try is to reseat the cables and connect the SATA hard drives to
a separate power supply and see whether that changes anything.

-- 
tejun

Re: Linux 2.6.24-rc7

[J.A. Magallón]

On Thu, 10 Jan 2008 22:10:08 +0900, Tejun Heo <htejun@gmail.com> wrote:

> Hi,
> 
> J.A. Magallón wrote:
> > It reproduces also with 2.6.23.13.
> > Finally I think the problematic disk is sdc:
> 
> Okay, then, it's less likely a regression and more likely a newly
> developed hardware problem.
> 
> > ICH5 PATA -> sda
> > ICH5 SATA0 -> sdb
> > ICH5 SATA1 -> sdc
> > Promise SATA -> sdd
> > 
> > The problem is that even I have commented out the entry for sdc in fstab,
> > the system is still giving me errors. An my guess is that errors in sdc makes
> > the ICH5 sata controller go nuts, and then I get errors also in sdb.
> > Just a couple questions...
> 
> I've never seen ICHs or any other SATA controllers act that way.
> 
> > - Can I say to ata_piix something like 'please, detect first SATA ports before
> >   ATA', so my system disk (sdb) becomes sda ?
> 
> You do that using LABEL, UUID or device ID.  Just run 'ls -l
> /dev/disk/by-*/' and see the result.
> 
> > - Can I say 'plz, ignore port 1', so it does not try to detect/start/spin sdc ?
> >   So I ban be sure it is the one to blame, before start to remove hardware...
> 
> Unfortunately not but you can boot into single mode where there's
> nothing trying to access the disk without your explicit command and
> verify access to each hard disk.
> 
> Hmm... You are seeing timeouts from multiple harddisks.  The first thing
> I would try is to reseat the cables and connect the SATA hard drives to
> a separate power supply and see whether that changes anything.
> 

I'm still pending to pysically remove the disks (or at least unplug the
cable...), but I have realized a cusious thing: after some errors, the
kernel is lowering the disk speed (UDMA/133, then 100, then 33):

ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd c8/00:08:07:81:3f/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: soft resetting link
ata3.00: configured for UDMA/133
ata3: EH complete
...
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd c8/00:48:05:73:33/00:00:00:00:00/ef tag 0 dma 36864 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: soft resetting link
ata3.00: configured for UDMA/133
ata3: EH complete
...
(one more 133)
...
ata3.00: limiting speed to UDMA/100:PIO4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd c8/00:40:8d:9c:84/00:00:00:00:00/eb tag 0 dma 32768 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: soft resetting link
ata3.00: configured for UDMA/100
...
(3 more 100)
...
ata3.00: limiting speed to UDMA/33:PIO4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ca/00:08:9f:00:1a/00:00:00:00:00/e2 tag 0 dma 4096 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: soft resetting link
ata3.00: configured for UDMA/33
...

Perhaps this gives a clue.
Or I just had bad luck and 2 of my 4 disks broke at the same time.

--
J.A. Magallon <jamagallon()ono!com>     \               Software is like sex:
                                         \         It's better when it's free
Mandriva Linux release 2008.1 (Cooker) for i586
Linux 2.6.23-jam05 (gcc 4.2.2 20071128 (4.2.2-2mdv2008.1)) SMP PREEMPT

Re: Linux 2.6.24-rc7

[Tejun Heo]

J.A. Magallón wrote:
> I'm still pending to pysically remove the disks (or at least unplug the
> cable...), but I have realized a cusious thing: after some errors, the
> kernel is lowering the disk speed (UDMA/133, then 100, then 33):

That's the standard error handling behavior.  Timeouts are likely to
indicate transmission problems so libata puts it into slower gear.

> Perhaps this gives a clue.
> Or I just had bad luck and 2 of my 4 disks broke at the same time.

As I said, the first thing I would try is to connect the drives to a
separate PSU and re-seating cables as you're seeing problems on two
drives simultaneously.

-- 
tejun

Re: Linux 2.6.24-rc7

[J.A. Magallón]

On Mon, 14 Jan 2008 08:57:35 +0900, Tejun Heo <htejun@gmail.com> wrote:

> J.A. Magallón wrote:
> > I'm still pending to pysically remove the disks (or at least unplug the
> > cable...), but I have realized a cusious thing: after some errors, the
> > kernel is lowering the disk speed (UDMA/133, then 100, then 33):
> 
> That's the standard error handling behavior.  Timeouts are likely to
> indicate transmission problems so libata puts it into slower gear.
> 
> > Perhaps this gives a clue.
> > Or I just had bad luck and 2 of my 4 disks broke at the same time.
> 
> As I said, the first thing I would try is to connect the drives to a
> separate PSU and re-seating cables as you're seeing problems on two
> drives simultaneously.
> 

I finally found the bad drive (the most obvious one as I would expect,
it was recycled from an older box...).
I tried removing completely the drive from power and controller, and then
running with it powered but not connected. No single error any more on
any of the other 3 drives. I have been updating my distro, rebuilding the
rpm database, moving big files between drives, even all at the same time.
No error.

I can't believe it, but a bad drive was causing timeouts on other drive
_on other controller_, the bad one was attached to the Promise and the
good ones on the ICH5 SATA (both integrated in motherboard).
Or there is a strange interaction in my board (Asus PC-DL), or there is
a nasty bug in the kernel...

--
J.A. Magallon <jamagallon()ono!com>     \               Software is like sex:
                                         \         It's better when it's free
Mandriva Linux release 2008.1 (Cooker) for i586
Linux 2.6.23-jam05 (gcc 4.2.2 20071128 (4.2.2-2mdv2008.1)) SMP PREEMPT

Re: Linux 2.6.24-rc7

[Tejun Heo]

J.A. Magallón wrote:
> I finally found the bad drive (the most obvious one as I would expect,
> it was recycled from an older box...).
> I tried removing completely the drive from power and controller, and then
> running with it powered but not connected. No single error any more on
> any of the other 3 drives. I have been updating my distro, rebuilding the
> rpm database, moving big files between drives, even all at the same time.
> No error.
> 
> I can't believe it, but a bad drive was causing timeouts on other drive
> _on other controller_, the bad one was attached to the Promise and the
> good ones on the ICH5 SATA (both integrated in motherboard).
> Or there is a strange interaction in my board (Asus PC-DL), or there is
> a nasty bug in the kernel...

Hmmm... That's an interesting story.  Can you please connect the faulty
harddrive to a separate power supply and connect the drive to the
controller and see whether IO errors go away?

-- 
tejun

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[Mariusz Kozlowski]

[-- Attachment #1: Type: text/plain, Size: 1261 bytes --]

Hello,

	Got this when doing usual looping over /proc entries on fresh test kernel:

WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()
Call Trace:
 [0000000000492704] lockdep_stats_show+0x6ac/0x6c0
 [00000000004eb4b4] seq_read+0x5c/0x340
 [000000000050b2bc] proc_reg_read+0x64/0xa0
 [00000000004cd72c] vfs_read+0x74/0x120
 [00000000004cdb4c] sys_read+0x34/0x60
 [00000000004062d4] linux_sparc_syscall32+0x3c/0x40
 [0000000000012ff4] 0x12ffc

and this would be:

#ifdef CONFIG_DEBUG_LOCKDEP
        DEBUG_LOCKS_WARN_ON(debug_atomic_read(&nr_unused_locks) != nr_unused);
#endif

Regards,

	Mariusz


Linux sparc64 2.6.24-rc7 #3 SMP PREEMPT Tue Jan 8 19:23:15 CET 2008 sparc64 sun4u TI UltraSparc II (BlackBird) GNU/Linux
 
Gnu C                  3.4.6
Gnu make               3.81
binutils               2.18
util-linux             2.12r
mount                  2.12r
module-init-tools      3.4
e2fsprogs              1.40.3
Linux C Library        2.6.1
Dynamic linker (ldd)   2.6.1
Procps                 3.2.7
Net-tools              1.60
Kbd                    1.13
Sh-utils               6.9
udev                   115
Modules Loaded         snd_pcm_oss snd_mixer_oss snd_sun_cs4231 snd_pcm snd_timer snd soundcore snd_page_alloc sunhme sr_mod cdrom sg

[-- Attachment #2: config-sparc64-2.6.24-rc7 --]
[-- Type: text/plain, Size: 21215 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Tue Jan  8 19:05:45 2008
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_QUICKLIST=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_HOTPLUG_CPU is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_SYSVIPC_COMPAT=y
CONFIG_GENERIC_HARDIRQS=y

#
# General machine setup
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
# CONFIG_CPU_FREQ is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
# CONFIG_SUN_LDOMS is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_BINFMT_ELF32=y
# CONFIG_BINFMT_AOUT32 is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_SOLARIS_EMUL=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_CMDLINE_BOOL is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLOGICPTI is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_SUNLANCE is not set
CONFIG_HAPPYMEAL=m
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#

#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
# CONFIG_SERIAL_SUNZILOG is not set
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
CONFIG_SERIAL_SUNSAB=m
CONFIG_SERIAL_SUNHV=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_SBUS=y
# CONFIG_FB_BW2 is not set
# CONFIG_FB_CG3 is not set
# CONFIG_FB_CG6 is not set
CONFIG_FB_FFB=y
# CONFIG_FB_TCX is not set
# CONFIG_FB_CG14 is not set
# CONFIG_FB_P9100 is not set
# CONFIG_FB_LEO is not set
# CONFIG_FB_XVR500 is not set
# CONFIG_FB_XVR2500 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
# CONFIG_PROM_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SUN_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# ALSA Sparc devices
#
# CONFIG_SND_SUN_AMD7930 is not set
CONFIG_SND_SUN_CS4231=m
# CONFIG_SND_SUN_DBRI is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=y
# CONFIG_OBP_FLASH is not set
# CONFIG_SUN_BPP is not set
# CONFIG_BBC_I2C is not set
# CONFIG_ENVCTRL is not set
# CONFIG_DISPLAY7SEG is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
# CONFIG_INSTRUMENTATION is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_BOOTMEM=y
CONFIG_DEBUG_PAGEALLOC=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[Mariusz Kozlowski]

[-- Attachment #1: Type: text/plain, Size: 1261 bytes --]

Hello,

	Got this when doing usual looping over /proc entries on fresh test kernel:

WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()
Call Trace:
 [0000000000492704] lockdep_stats_show+0x6ac/0x6c0
 [00000000004eb4b4] seq_read+0x5c/0x340
 [000000000050b2bc] proc_reg_read+0x64/0xa0
 [00000000004cd72c] vfs_read+0x74/0x120
 [00000000004cdb4c] sys_read+0x34/0x60
 [00000000004062d4] linux_sparc_syscall32+0x3c/0x40
 [0000000000012ff4] 0x12ffc

and this would be:

#ifdef CONFIG_DEBUG_LOCKDEP
        DEBUG_LOCKS_WARN_ON(debug_atomic_read(&nr_unused_locks) != nr_unused);
#endif

Regards,

	Mariusz


Linux sparc64 2.6.24-rc7 #3 SMP PREEMPT Tue Jan 8 19:23:15 CET 2008 sparc64 sun4u TI UltraSparc II (BlackBird) GNU/Linux
 
Gnu C                  3.4.6
Gnu make               3.81
binutils               2.18
util-linux             2.12r
mount                  2.12r
module-init-tools      3.4
e2fsprogs              1.40.3
Linux C Library        2.6.1
Dynamic linker (ldd)   2.6.1
Procps                 3.2.7
Net-tools              1.60
Kbd                    1.13
Sh-utils               6.9
udev                   115
Modules Loaded         snd_pcm_oss snd_mixer_oss snd_sun_cs4231 snd_pcm snd_timer snd soundcore snd_page_alloc sunhme sr_mod cdrom sg

[-- Attachment #2: config-sparc64-2.6.24-rc7 --]
[-- Type: text/plain, Size: 21215 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Tue Jan  8 19:05:45 2008
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_QUICKLIST=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_HOTPLUG_CPU is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_SYSVIPC_COMPAT=y
CONFIG_GENERIC_HARDIRQS=y

#
# General machine setup
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
# CONFIG_CPU_FREQ is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
# CONFIG_SUN_LDOMS is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_BINFMT_ELF32=y
# CONFIG_BINFMT_AOUT32 is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_SOLARIS_EMUL=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_CMDLINE_BOOL is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLOGICPTI is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_SUNLANCE is not set
CONFIG_HAPPYMEAL=m
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#

#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
# CONFIG_SERIAL_SUNZILOG is not set
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
CONFIG_SERIAL_SUNSAB=m
CONFIG_SERIAL_SUNHV=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_SBUS=y
# CONFIG_FB_BW2 is not set
# CONFIG_FB_CG3 is not set
# CONFIG_FB_CG6 is not set
CONFIG_FB_FFB=y
# CONFIG_FB_TCX is not set
# CONFIG_FB_CG14 is not set
# CONFIG_FB_P9100 is not set
# CONFIG_FB_LEO is not set
# CONFIG_FB_XVR500 is not set
# CONFIG_FB_XVR2500 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
# CONFIG_PROM_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SUN_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# ALSA Sparc devices
#
# CONFIG_SND_SUN_AMD7930 is not set
CONFIG_SND_SUN_CS4231=m
# CONFIG_SND_SUN_DBRI is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=y
# CONFIG_OBP_FLASH is not set
# CONFIG_SUN_BPP is not set
# CONFIG_BBC_I2C is not set
# CONFIG_ENVCTRL is not set
# CONFIG_DISPLAY7SEG is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
# CONFIG_INSTRUMENTATION is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_BOOTMEM=y
CONFIG_DEBUG_PAGEALLOC=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

Re: Linux 2.6.24-rc7: sparc64: WARNING: at

[Randy Dunlap]

On Tue, 8 Jan 2008 19:42:16 +0100 Mariusz Kozlowski wrote:

> Hello,
> 
> 	Got this when doing usual looping over /proc entries on fresh test kernel:

What is the usual looping, please?

---
~Randy

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[Randy Dunlap]

On Tue, 8 Jan 2008 19:42:16 +0100 Mariusz Kozlowski wrote:

> Hello,
> 
> 	Got this when doing usual looping over /proc entries on fresh test kernel:

What is the usual looping, please?

---
~Randy

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[Mariusz Kozlowski]

Hello, 

> > 	Got this when doing usual looping over /proc entries on fresh test kernel:
> 
> What is the usual looping, please?

#!/bin/bash

for i in `find /proc -type f`; do
        echo -n "cat $i > /dev/null ... ";
        ( cat $i > /dev/null & );
        echo "done";
done

Regards,

	Mariusz

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[Mariusz Kozlowski]

Hello, 

> > 	Got this when doing usual looping over /proc entries on fresh test kernel:
> 
> What is the usual looping, please?

#!/bin/bash

for i in `find /proc -type f`; do
        echo -n "cat $i > /dev/null ... ";
        ( cat $i > /dev/null & );
        echo "done";
done

Regards,

	Mariusz

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267

[Randy Dunlap]

Mariusz Kozlowski wrote:
> Hello, 
> 
>>> 	Got this when doing usual looping over /proc entries on fresh test kernel:
>> What is the usual looping, please?
> 
> #!/bin/bash
> 
> for i in `find /proc -type f`; do
>         echo -n "cat $i > /dev/null ... ";
>         ( cat $i > /dev/null & );
>         echo "done";
> done

OK, thanks.  Probably not related to the problem report, but
the script should probably check each file for 'readable' (-r).
/proc/sysrq-trigger is write-only...

-- 
~Randy

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[Randy Dunlap]

Mariusz Kozlowski wrote:
> Hello, 
> 
>>> 	Got this when doing usual looping over /proc entries on fresh test kernel:
>> What is the usual looping, please?
> 
> #!/bin/bash
> 
> for i in `find /proc -type f`; do
>         echo -n "cat $i > /dev/null ... ";
>         ( cat $i > /dev/null & );
>         echo "done";
> done

OK, thanks.  Probably not related to the problem report, but
the script should probably check each file for 'readable' (-r).
/proc/sysrq-trigger is write-only...

-- 
~Randy

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[Mariusz Kozlowski]

Hello,

> >>> 	Got this when doing usual looping over /proc entries on fresh test kernel:
> >> What is the usual looping, please?
> > 
> > #!/bin/bash
> > 
> > for i in `find /proc -type f`; do
> >         echo -n "cat $i > /dev/null ... ";
> >         ( cat $i > /dev/null & );
> >         echo "done";
> > done
> 
> OK, thanks.  Probably not related to the problem report, but
> the script should probably check each file for 'readable' (-r).
> /proc/sysrq-trigger is write-only...

Hm... true. Good hint.

Thanks,

	Mariusz

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[Mariusz Kozlowski]

Hello,

> >>> 	Got this when doing usual looping over /proc entries on fresh test kernel:
> >> What is the usual looping, please?
> > 
> > #!/bin/bash
> > 
> > for i in `find /proc -type f`; do
> >         echo -n "cat $i > /dev/null ... ";
> >         ( cat $i > /dev/null & );
> >         echo "done";
> > done
> 
> OK, thanks.  Probably not related to the problem report, but
> the script should probably check each file for 'readable' (-r).
> /proc/sysrq-trigger is write-only...

Hm... true. Good hint.

Thanks,

	Mariusz

Re: Linux 2.6.24-rc7: sparc64: WARNING: at

[David Miller]

From: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Date: Tue, 8 Jan 2008 19:42:16 +0100

> Hello,
> 
> 	Got this when doing usual looping over /proc entries on fresh test kernel:
> 
> WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()
> Call Trace:
>  [0000000000492704] lockdep_stats_show+0x6ac/0x6c0
>  [00000000004eb4b4] seq_read+0x5c/0x340
>  [000000000050b2bc] proc_reg_read+0x64/0xa0
>  [00000000004cd72c] vfs_read+0x74/0x120
>  [00000000004cdb4c] sys_read+0x34/0x60
>  [00000000004062d4] linux_sparc_syscall32+0x3c/0x40
>  [0000000000012ff4] 0x12ffc

Please turn off lockdep on sparc64, currently it not
reliable.  I have many things to audit, including how
the stack frames are presented to the lockdep layer.

So any problem you run into can be due to issues like
that.

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[David Miller]

From: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Date: Tue, 8 Jan 2008 19:42:16 +0100

> Hello,
> 
> 	Got this when doing usual looping over /proc entries on fresh test kernel:
> 
> WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()
> Call Trace:
>  [0000000000492704] lockdep_stats_show+0x6ac/0x6c0
>  [00000000004eb4b4] seq_read+0x5c/0x340
>  [000000000050b2bc] proc_reg_read+0x64/0xa0
>  [00000000004cd72c] vfs_read+0x74/0x120
>  [00000000004cdb4c] sys_read+0x34/0x60
>  [00000000004062d4] linux_sparc_syscall32+0x3c/0x40
>  [0000000000012ff4] 0x12ffc

Please turn off lockdep on sparc64, currently it not
reliable.  I have many things to audit, including how
the stack frames are presented to the lockdep layer.

So any problem you run into can be due to issues like
that.

Re: Linux 2.6.24-rc7: sparc64: WARNING: at

[Ingo Molnar]

* David Miller <davem@davemloft.net> wrote:

> > WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()
> > Call Trace:
> >  [0000000000492704] lockdep_stats_show+0x6ac/0x6c0
> >  [00000000004eb4b4] seq_read+0x5c/0x340
> >  [000000000050b2bc] proc_reg_read+0x64/0xa0
> >  [00000000004cd72c] vfs_read+0x74/0x120
> >  [00000000004cdb4c] sys_read+0x34/0x60
> >  [00000000004062d4] linux_sparc_syscall32+0x3c/0x40
> >  [0000000000012ff4] 0x12ffc
> 
> Please turn off lockdep on sparc64, currently it not reliable.  I have 
> many things to audit, including how the stack frames are presented to 
> the lockdep layer.
> 
> So any problem you run into can be due to issues like that.

is this anything the core lockdep code could help improve? Let us know 
if any aspect is hindering you.

	Ingo

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[Ingo Molnar]

* David Miller <davem@davemloft.net> wrote:

> > WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()
> > Call Trace:
> >  [0000000000492704] lockdep_stats_show+0x6ac/0x6c0
> >  [00000000004eb4b4] seq_read+0x5c/0x340
> >  [000000000050b2bc] proc_reg_read+0x64/0xa0
> >  [00000000004cd72c] vfs_read+0x74/0x120
> >  [00000000004cdb4c] sys_read+0x34/0x60
> >  [00000000004062d4] linux_sparc_syscall32+0x3c/0x40
> >  [0000000000012ff4] 0x12ffc
> 
> Please turn off lockdep on sparc64, currently it not reliable.  I have 
> many things to audit, including how the stack frames are presented to 
> the lockdep layer.
> 
> So any problem you run into can be due to issues like that.

is this anything the core lockdep code could help improve? Let us know 
if any aspect is hindering you.

	Ingo

Re: Linux 2.6.24-rc7: sparc64: WARNING: at

[David Miller]

From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 8 Jan 2008 23:56:31 +0100

> is this anything the core lockdep code could help improve? Let us know 
> if any aspect is hindering you.

No, it's a sparc64 issue.

Another problem I ran into are the huge static table sizes
lockdep uses.  They really need to be either made smaller or
dynamically allocated.

Sparc64 has hard limitations on kernel size (due to firmware
and bootloader issues) and I hit these limits if I am not
careful on SMP with lockdep enabled.

Andi Kleen and I discussed in a thread several weeks ago.
I believe Andi even came up with a suggested direction to
fix this.

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[David Miller]

From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 8 Jan 2008 23:56:31 +0100

> is this anything the core lockdep code could help improve? Let us know 
> if any aspect is hindering you.

No, it's a sparc64 issue.

Another problem I ran into are the huge static table sizes
lockdep uses.  They really need to be either made smaller or
dynamically allocated.

Sparc64 has hard limitations on kernel size (due to firmware
and bootloader issues) and I hit these limits if I am not
careful on SMP with lockdep enabled.

Andi Kleen and I discussed in a thread several weeks ago.
I believe Andi even came up with a suggested direction to
fix this.

Re: Linux 2.6.24-rc7: sparc64: WARNING: at

[Ingo Molnar]

* David Miller <davem@davemloft.net> wrote:

> From: Ingo Molnar <mingo@elte.hu>
> Date: Tue, 8 Jan 2008 23:56:31 +0100
> 
> > is this anything the core lockdep code could help improve? Let us know 
> > if any aspect is hindering you.
> 
> No, it's a sparc64 issue.
> 
> Another problem I ran into are the huge static table sizes lockdep 
> uses.  They really need to be either made smaller or dynamically 
> allocated.

Andi has submitted patches for that.

> Sparc64 has hard limitations on kernel size (due to firmware and 
> bootloader issues) and I hit these limits if I am not careful on SMP 
> with lockdep enabled.
> 
> Andi Kleen and I discussed in a thread several weeks ago. I believe 
> Andi even came up with a suggested direction to fix this.

yeah, i'll pick them up, probably tomorrow.

	Ingo

Re: Linux 2.6.24-rc7: sparc64: WARNING: at kernel/lockdep_proc.c:267 lockdep_stats_show()

[Ingo Molnar]

* David Miller <davem@davemloft.net> wrote:

> From: Ingo Molnar <mingo@elte.hu>
> Date: Tue, 8 Jan 2008 23:56:31 +0100
> 
> > is this anything the core lockdep code could help improve? Let us know 
> > if any aspect is hindering you.
> 
> No, it's a sparc64 issue.
> 
> Another problem I ran into are the huge static table sizes lockdep 
> uses.  They really need to be either made smaller or dynamically 
> allocated.

Andi has submitted patches for that.

> Sparc64 has hard limitations on kernel size (due to firmware and 
> bootloader issues) and I hit these limits if I am not careful on SMP 
> with lockdep enabled.
> 
> Andi Kleen and I discussed in a thread several weeks ago. I believe 
> Andi even came up with a suggested direction to fix this.

yeah, i'll pick them up, probably tomorrow.

	Ingo

Re: Linux 2.6.24-rc7

[Willy Tarreau]

On Sun, Jan 06, 2008 at 02:19:16PM -0800, Linus Torvalds wrote:
> Both git trees and tar-balls/patches pushed out, should be mirroring out 
> within minutes. So there are no excuses to not try it out, and see if your 
> favorite regression has been fixed.

At first glance, looks fine and fast here on dual-athlon XP desktop with
adaptec SCSI, NFS, e1000 and SBLive. All the comments here did not look
encouraging, but I'll let it run as long as possible there since I
encountered no build nor boot error.

Cheers,
Willy