* Bad value with w83627thf @ 2008-05-16 12:59 ` Oliver Pinter 0 siblings, 0 replies; 10+ messages in thread From: Oliver Pinter @ 2008-05-16 12:59 UTC (permalink / raw) To: i2c-GZX6beZjE8VD60Wz+7aTrA, linux-kernel-u79uwXL29TY76Z2rM5mHXA linux-2.6 - git HEAD on: 9662369 lm-sensors: 1:3.0.1-5 libsensors4: 1:3.0.1-5 os: debian lenny sernsor: w83627thf on asus p4c800 MB with 2.6.26-rcX kernel, reported false Battery values, --------------------------------------> VBat: +3.26 V (min = +0.02 V, max = +3.01 V) ALARM <------------------------------------- lspci -xxx 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 -- Thanks, Oliver _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c ^ permalink raw reply [flat|nested] 10+ messages in thread
* Bad value with w83627thf @ 2008-05-16 12:59 ` Oliver Pinter 0 siblings, 0 replies; 10+ messages in thread From: Oliver Pinter @ 2008-05-16 12:59 UTC (permalink / raw) To: i2c, linux-kernel linux-2.6 - git HEAD on: 9662369 lm-sensors: 1:3.0.1-5 libsensors4: 1:3.0.1-5 os: debian lenny sernsor: w83627thf on asus p4c800 MB with 2.6.26-rcX kernel, reported false Battery values, --------------------------------------> VBat: +3.26 V (min = +0.02 V, max = +3.01 V) ALARM <------------------------------------- lspci -xxx 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 -- Thanks, Oliver ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Bad value with w83627thf 2008-05-16 12:59 ` Oliver Pinter @ 2008-05-16 13:27 ` Jean Delvare -1 siblings, 0 replies; 10+ messages in thread From: Jean Delvare @ 2008-05-16 13:27 UTC (permalink / raw) To: Oliver Pinter; +Cc: LM Sensors, linux-kernel Hi Oliver, You are writing to the wrong mailing list (i2c instead of lm-sensors) so I am redirecting. On Fri, 16 May 2008 14:59:21 +0200, Oliver Pinter wrote: > linux-2.6 - git HEAD on: 9662369 > lm-sensors: 1:3.0.1-5 > libsensors4: 1:3.0.1-5 > os: debian lenny > sernsor: w83627thf on asus p4c800 MB > > with 2.6.26-rcX kernel, reported false Battery values, > --------------------------------------> > VBat: +3.26 V (min = +0.02 V, max = +3.01 V) ALARM > <------------------------------------- There is nothing wrong here. +3.26V sounds possible and correct for the battery voltage. If you are worried about the min and max values: it is up to you to edit your sensors3.conf file to set them properly if the BIOS of your motherboard did not (apply the changes with "sensors -s"). The alarm will go away when you do. > lspci -xxx > 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus > Controller (rev 02) > 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 > 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 Completely irrelevant here, the Winbond W83627THF is an LPC chip, it doesn't have an I2C/SMBus interface, so the SMBus controller doesn't matter at all. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Bad value with w83627thf @ 2008-05-16 13:27 ` Jean Delvare 0 siblings, 0 replies; 10+ messages in thread From: Jean Delvare @ 2008-05-16 13:27 UTC (permalink / raw) To: Oliver Pinter; +Cc: LM Sensors, linux-kernel Hi Oliver, You are writing to the wrong mailing list (i2c instead of lm-sensors) so I am redirecting. On Fri, 16 May 2008 14:59:21 +0200, Oliver Pinter wrote: > linux-2.6 - git HEAD on: 9662369 > lm-sensors: 1:3.0.1-5 > libsensors4: 1:3.0.1-5 > os: debian lenny > sernsor: w83627thf on asus p4c800 MB > > with 2.6.26-rcX kernel, reported false Battery values, > --------------------------------------> > VBat: +3.26 V (min = +0.02 V, max = +3.01 V) ALARM > <------------------------------------- There is nothing wrong here. +3.26V sounds possible and correct for the battery voltage. If you are worried about the min and max values: it is up to you to edit your sensors3.conf file to set them properly if the BIOS of your motherboard did not (apply the changes with "sensors -s"). The alarm will go away when you do. > lspci -xxx > 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus > Controller (rev 02) > 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 > 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 Completely irrelevant here, the Winbond W83627THF is an LPC chip, it doesn't have an I2C/SMBus interface, so the SMBus controller doesn't matter at all. -- Jean Delvare ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Bad value with w83627thf 2008-05-16 13:27 ` Jean Delvare @ 2008-05-16 13:45 ` Oliver Pinter -1 siblings, 0 replies; 10+ messages in thread From: Oliver Pinter @ 2008-05-16 13:45 UTC (permalink / raw) To: Jean Delvare; +Cc: LM Sensors, linux-kernel Hi Jean! sorry for the bad ML. the battery is CR2032, and it is 3V, im older kernel alway reported bad value 0,02V or 2,4V (i think it is a possible value), after i inserted new battery, show 2,4V. from the 2.6.26-rcX kernel showed the 3+ V. when i reboot to older kernel, the this state remained, but when turned off the pc, then not. On 5/16/08, Jean Delvare <khali@linux-fr.org> wrote: > Hi Oliver, > > You are writing to the wrong mailing list (i2c instead of lm-sensors) > so I am redirecting. > > On Fri, 16 May 2008 14:59:21 +0200, Oliver Pinter wrote: >> linux-2.6 - git HEAD on: 9662369 >> lm-sensors: 1:3.0.1-5 >> libsensors4: 1:3.0.1-5 >> os: debian lenny >> sernsor: w83627thf on asus p4c800 MB >> >> with 2.6.26-rcX kernel, reported false Battery values, >> --------------------------------------> >> VBat: +3.26 V (min = +0.02 V, max = +3.01 V) ALARM >> <------------------------------------- > > There is nothing wrong here. +3.26V sounds possible and correct for the > battery voltage. If you are worried about the min and max values: it is > up to you to edit your sensors3.conf file to set them properly if the > BIOS of your motherboard did not (apply the changes with "sensors -s"). > The alarm will go away when you do. > >> lspci -xxx >> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus >> Controller (rev 02) >> 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 >> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 >> 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 >> 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 > > Completely irrelevant here, the Winbond W83627THF is an LPC chip, it > doesn't have an I2C/SMBus interface, so the SMBus controller doesn't > matter at all. > > -- > Jean Delvare > -- Thanks, Oliver _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Bad value with w83627thf @ 2008-05-16 13:45 ` Oliver Pinter 0 siblings, 0 replies; 10+ messages in thread From: Oliver Pinter @ 2008-05-16 13:45 UTC (permalink / raw) To: Jean Delvare; +Cc: LM Sensors, linux-kernel Hi Jean! sorry for the bad ML. the battery is CR2032, and it is 3V, im older kernel alway reported bad value 0,02V or 2,4V (i think it is a possible value), after i inserted new battery, show 2,4V. from the 2.6.26-rcX kernel showed the 3+ V. when i reboot to older kernel, the this state remained, but when turned off the pc, then not. On 5/16/08, Jean Delvare <khali@linux-fr.org> wrote: > Hi Oliver, > > You are writing to the wrong mailing list (i2c instead of lm-sensors) > so I am redirecting. > > On Fri, 16 May 2008 14:59:21 +0200, Oliver Pinter wrote: >> linux-2.6 - git HEAD on: 9662369 >> lm-sensors: 1:3.0.1-5 >> libsensors4: 1:3.0.1-5 >> os: debian lenny >> sernsor: w83627thf on asus p4c800 MB >> >> with 2.6.26-rcX kernel, reported false Battery values, >> --------------------------------------> >> VBat: +3.26 V (min = +0.02 V, max = +3.01 V) ALARM >> <------------------------------------- > > There is nothing wrong here. +3.26V sounds possible and correct for the > battery voltage. If you are worried about the min and max values: it is > up to you to edit your sensors3.conf file to set them properly if the > BIOS of your motherboard did not (apply the changes with "sensors -s"). > The alarm will go away when you do. > >> lspci -xxx >> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus >> Controller (rev 02) >> 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 >> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 >> 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 >> 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 > > Completely irrelevant here, the Winbond W83627THF is an LPC chip, it > doesn't have an I2C/SMBus interface, so the SMBus controller doesn't > matter at all. > > -- > Jean Delvare > -- Thanks, Oliver ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Bad value with w83627thf 2008-05-16 13:45 ` Oliver Pinter @ 2008-05-16 14:26 ` Jean Delvare -1 siblings, 0 replies; 10+ messages in thread From: Jean Delvare @ 2008-05-16 14:26 UTC (permalink / raw) To: Oliver Pinter; +Cc: LM Sensors, linux-kernel Hi Oliver, On Fri, 16 May 2008 15:45:01 +0200, Oliver Pinter wrote: > the battery is CR2032, and it is 3V, im older kernel alway reported > bad value 0,02V or 2,4V (i think it is a possible value), after i > inserted new battery, show 2,4V. > from the 2.6.26-rcX kernel showed the 3+ V. when i reboot to older > kernel, the this state remained, but when turned off the pc, then not. This can be easily explained. In kernel 2.6.25, we fixed a bug where the w83627hf driver assumed that the BIOS had enabled VBat monitoring [1]. With previous kernels, the VBat value would be wrong if the BIOS did not actually enable VBat monitoring. Since kernel 2.6.25, the w83627hf driver doesn't assume anything from the BIOS as far as VBat is concerned, and enables monitoring if needed. When you reboot your machine, the W83627THF device is not reset, so the configuration steps done by the w83627hf driver of kernel 2.6.25+ remain. However, if you stop the machine then start it again, the configuration is lost. [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;hï878b11ba245d14b7db7816217a825d6a894182 -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Bad value with w83627thf @ 2008-05-16 14:26 ` Jean Delvare 0 siblings, 0 replies; 10+ messages in thread From: Jean Delvare @ 2008-05-16 14:26 UTC (permalink / raw) To: Oliver Pinter; +Cc: LM Sensors, linux-kernel Hi Oliver, On Fri, 16 May 2008 15:45:01 +0200, Oliver Pinter wrote: > the battery is CR2032, and it is 3V, im older kernel alway reported > bad value 0,02V or 2,4V (i think it is a possible value), after i > inserted new battery, show 2,4V. > from the 2.6.26-rcX kernel showed the 3+ V. when i reboot to older > kernel, the this state remained, but when turned off the pc, then not. This can be easily explained. In kernel 2.6.25, we fixed a bug where the w83627hf driver assumed that the BIOS had enabled VBat monitoring [1]. With previous kernels, the VBat value would be wrong if the BIOS did not actually enable VBat monitoring. Since kernel 2.6.25, the w83627hf driver doesn't assume anything from the BIOS as far as VBat is concerned, and enables monitoring if needed. When you reboot your machine, the W83627THF device is not reset, so the configuration steps done by the w83627hf driver of kernel 2.6.25+ remain. However, if you stop the machine then start it again, the configuration is lost. [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ef878b11ba245d14b7db7816217a825d6a894182 -- Jean Delvare ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [lm-sensors] Bad value with w83627thf 2008-05-16 14:26 ` Jean Delvare @ 2008-05-16 14:34 ` Oliver Pinter -1 siblings, 0 replies; 10+ messages in thread From: Oliver Pinter @ 2008-05-16 14:34 UTC (permalink / raw) To: Jean Delvare; +Cc: LM Sensors, linux-kernel Hi Jean! [snip] > When you reboot your machine, the W83627THF device is not reset, so the > configuration steps done by the w83627hf driver of kernel 2.6.25+ > remain. However, if you stop the machine then start it again, the > configuration is lost. yean I thinked this, but dont know, what is this base (the git commit explained) > > [1] > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;hï878b11ba245d14b7db7816217a825d6a894182 > > -- > Jean Delvare > thanks the help, and then i backported this commit to 2.6.22.y and changed the limit values in sensors.conf -- Thanks, Oliver _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Bad value with w83627thf @ 2008-05-16 14:34 ` Oliver Pinter 0 siblings, 0 replies; 10+ messages in thread From: Oliver Pinter @ 2008-05-16 14:34 UTC (permalink / raw) To: Jean Delvare; +Cc: LM Sensors, linux-kernel Hi Jean! [snip] > When you reboot your machine, the W83627THF device is not reset, so the > configuration steps done by the w83627hf driver of kernel 2.6.25+ > remain. However, if you stop the machine then start it again, the > configuration is lost. yean I thinked this, but dont know, what is this base (the git commit explained) > > [1] > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ef878b11ba245d14b7db7816217a825d6a894182 > > -- > Jean Delvare > thanks the help, and then i backported this commit to 2.6.22.y and changed the limit values in sensors.conf -- Thanks, Oliver ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2008-05-16 14:34 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-05-16 12:59 Bad value with w83627thf Oliver Pinter 2008-05-16 12:59 ` Oliver Pinter 2008-05-16 13:27 ` [lm-sensors] " Jean Delvare 2008-05-16 13:27 ` Jean Delvare 2008-05-16 13:45 ` [lm-sensors] " Oliver Pinter 2008-05-16 13:45 ` Oliver Pinter 2008-05-16 14:26 ` [lm-sensors] " Jean Delvare 2008-05-16 14:26 ` Jean Delvare 2008-05-16 14:34 ` [lm-sensors] " Oliver Pinter 2008-05-16 14:34 ` Oliver Pinter
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.