From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Suresh Siddha <suresh.b.siddha@intel.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86: let 32bit use apic_ops too
Date: Fri, 11 Jul 2008 18:41:54 -0700 [thread overview]
Message-ID: <200807111841.55403.yhlu.kernel@gmail.com> (raw)
In-Reply-To: <200807102038.26591.yhlu.kernel@gmail.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
arch/x86/kernel/apic_32.c | 39 +++++++++++++++++++++++++++++++--------
include/asm-x86/apic.h | 13 ++-----------
2 files changed, 33 insertions(+), 19 deletions(-)
Index: linux-2.6/arch/x86/kernel/apic_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic_32.c
+++ linux-2.6/arch/x86/kernel/apic_32.c
@@ -145,19 +145,13 @@ static int modern_apic(void)
return lapic_get_version() >= 0x14;
}
-void apic_icr_write(u32 low, u32 id)
-{
- apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(id));
- apic_write_around(APIC_ICR, low);
-}
-
-void apic_wait_icr_idle(void)
+void xapic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
cpu_relax();
}
-u32 safe_apic_wait_icr_idle(void)
+u32 safe_xapic_wait_icr_idle(void)
{
u32 send_status;
int timeout;
@@ -173,6 +167,35 @@ u32 safe_apic_wait_icr_idle(void)
return send_status;
}
+void xapic_icr_write(u32 low, u32 id)
+{
+ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(id));
+ apic_write_around(APIC_ICR, low);
+}
+
+u64 xapic_icr_read(void)
+{
+ u32 icr1, icr2;
+
+ icr2 = apic_read(APIC_ICR2);
+ icr1 = apic_read(APIC_ICR);
+
+ return icr1 | ((u64)icr2 << 32);
+}
+
+static struct apic_ops xapic_ops = {
+ .read = native_apic_mem_read,
+ .write = native_apic_mem_write,
+ .write_atomic = native_apic_mem_write_atomic,
+ .icr_read = xapic_icr_read,
+ .icr_write = xapic_icr_write,
+ .wait_icr_idle = xapic_wait_icr_idle,
+ .safe_wait_icr_idle = safe_xapic_wait_icr_idle,
+};
+
+struct apic_ops __read_mostly *apic_ops = &xapic_ops;
+EXPORT_SYMBOL_GPL(apic_ops);
+
/**
* enable_NMI_through_LVT0 - enable NMI through local vector table 0
*/
Index: linux-2.6/include/asm-x86/apic.h
===================================================================
--- linux-2.6.orig/include/asm-x86/apic.h
+++ linux-2.6/include/asm-x86/apic.h
@@ -49,11 +49,6 @@ extern int disable_apic;
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
-#ifndef CONFIG_X86_64
-#define apic_write native_apic_mem_write
-#define apic_write_atomic native_apic_mem_write_atomic
-#define apic_read native_apic_mem_read
-#endif
#define setup_boot_clock setup_boot_APIC_clock
#define setup_secondary_clock setup_secondary_APIC_clock
#endif
@@ -95,16 +90,13 @@ static inline u32 native_apic_msr_read(u
return low;
}
-#ifdef CONFIG_X86_32
-extern void apic_wait_icr_idle(void);
-extern u32 safe_apic_wait_icr_idle(void);
-extern void apic_icr_write(u32 low, u32 id);
-#else
+#ifndef CONFIG_X86_32
extern int x2apic, x2apic_preenabled;
extern void check_x2apic(void);
extern void enable_x2apic(void);
extern void enable_IR_x2apic(void);
extern void x2apic_icr_write(u32 low, u32 id);
+#endif
struct apic_ops {
u32 (*read)(u32 reg);
@@ -125,7 +117,6 @@ extern struct apic_ops *apic_ops;
#define apic_icr_write (apic_ops->icr_write)
#define apic_wait_icr_idle (apic_ops->wait_icr_idle)
#define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle)
-#endif
extern int get_physical_broadcast(void);
next prev parent reply other threads:[~2008-07-12 1:45 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-08 8:41 [PATCH] x86: introduce page_size_mask for 64bit Yinghai Lu
2008-07-08 8:43 ` [PATCH] x86: not overmap than end in init_memory_mapping - 64bit Yinghai Lu
2008-07-09 7:38 ` Ingo Molnar
2008-07-09 8:34 ` Ingo Molnar
2008-07-09 8:37 ` Yinghai Lu
2008-07-09 8:46 ` Ingo Molnar
2008-07-09 8:58 ` Yinghai Lu
2008-07-09 10:01 ` Yinghai Lu
2008-07-09 10:30 ` Ingo Molnar
2008-07-09 8:45 ` Ingo Molnar
2008-07-10 3:15 ` [PATCh] x86: overmapped fix when 4K pages on tail " Yinghai Lu
2008-07-10 3:16 ` [PATCH] x86: merge __acpi_map_table Yinghai Lu
2008-07-10 3:17 ` [PATCH] x86: make e820_end return end_of_ram again for 64bit Yinghai Lu
2008-07-10 7:00 ` Ingo Molnar
2008-07-10 11:17 ` [PATCH] x86: e820 remove the range instead of update it to reserved Yinghai Lu
2008-07-11 8:20 ` Ingo Molnar
2008-07-11 3:36 ` [PATCH] x86: save slit Yinghai Lu
2008-07-11 8:22 ` Ingo Molnar
2008-07-11 3:38 ` [PATCH] x86: introduce max_low_pfn_mapped for 64bit Yinghai Lu
2008-07-11 8:26 ` Ingo Molnar
2008-07-11 8:39 ` Yinghai Lu
2008-07-11 8:51 ` Ingo Molnar
2008-07-12 1:41 ` Yinghai Lu [this message]
2008-07-12 1:43 ` [PATCH] x86: mach_apicdef.h need to include before smp.h Yinghai Lu
2008-07-12 1:44 ` [PATCH] x86: make read_apic_id return final apicid Yinghai Lu
2008-07-12 8:01 ` [PATCH] x86: make 64bit have get_apic_id Yinghai Lu
2008-07-13 6:28 ` Ingo Molnar
2008-07-13 6:59 ` Ingo Molnar
2008-07-13 7:05 ` Yinghai Lu
2008-07-13 9:23 ` Ingo Molnar
2008-07-13 9:28 ` Ingo Molnar
2008-07-13 16:15 ` Suresh Siddha
2008-07-13 1:19 ` [PATCH] x86: make read_apic_id return final apicid Suresh Siddha
2008-07-13 1:08 ` [PATCH] x86: let 32bit use apic_ops too Suresh Siddha
2008-07-13 2:04 ` Yinghai Lu
2008-07-13 16:28 ` Suresh Siddha
2008-07-13 16:51 ` Maciej W. Rozycki
2008-07-13 17:16 ` Cyrill Gorcunov
2008-07-13 23:46 ` Maciej W. Rozycki
2008-07-14 16:48 ` Cyrill Gorcunov
2008-07-14 17:20 ` Maciej W. Rozycki
2008-07-14 18:09 ` Cyrill Gorcunov
2008-07-14 18:24 ` Maciej W. Rozycki
2008-07-14 18:32 ` Cyrill Gorcunov
2008-07-13 1:43 ` Maciej W. Rozycki
2008-07-13 1:45 ` Yinghai Lu
2008-07-13 1:54 ` Maciej W. Rozycki
2008-07-13 16:43 ` Suresh Siddha
2008-07-13 17:05 ` Maciej W. Rozycki
2008-07-14 5:19 ` [PATCH] x86: let 32bit use apic_ops too - fix Yinghai Lu
2008-07-14 7:12 ` Ingo Molnar
2008-07-14 16:49 ` Suresh Siddha
2008-07-14 17:00 ` Yinghai Lu
2008-07-14 18:03 ` Suresh Siddha
2008-07-18 17:06 ` Ingo Molnar
2008-07-15 17:33 ` Suresh Siddha
2008-07-15 18:10 ` Yinghai Lu
2008-07-15 18:27 ` Suresh Siddha
2008-07-18 17:07 ` Ingo Molnar
2008-07-12 21:30 ` [PATCH] x86: max_low_pfn_mapped fix #1 Yinghai Lu
2008-07-13 9:45 ` Ingo Molnar
2008-07-12 21:31 ` [PATCH] x86: max_low_pfn_mapped fix #2 Yinghai Lu
2008-07-12 21:32 ` [PATCH] x86: max_low_pfn_mapped fix #3 Yinghai Lu
2008-07-13 21:29 ` [PATCH] x86: max_low_pfn_mapped fix #4 Yinghai Lu
2008-07-13 21:30 ` [PATCH] x86: get x86_phys_bits early Yinghai Lu
2008-07-13 21:32 ` [PATCH] x86: make 64bit hpet_set_mapping to use ioremap too Yinghai Lu
2008-07-13 21:50 ` [PATCH] x86: make 64bit hpet_set_mapping to use ioremap too v2 Yinghai Lu
2008-07-10 6:54 ` [PATCH] x86: merge __acpi_map_table Ingo Molnar
2008-07-10 6:53 ` [PATCh] x86: overmapped fix when 4K pages on tail - 64bit Ingo Molnar
2008-07-10 6:57 ` Yinghai Lu
2008-07-10 7:20 ` Ingo Molnar
2008-07-10 7:32 ` Yinghai Lu
2008-07-10 14:16 ` Arjan van de Ven
2008-07-13 14:57 ` Andi Kleen
2008-07-13 15:33 ` Arjan van de Ven
2008-07-13 18:25 ` Andi Kleen
2008-07-13 18:17 ` Yinghai Lu
2008-07-13 18:48 ` Andi Kleen
2008-07-13 19:00 ` Yinghai Lu
2008-07-13 20:32 ` Ingo Molnar
2008-07-13 20:51 ` Andi Kleen
2008-07-14 0:04 ` H. Peter Anvin
2008-07-14 6:39 ` Andi Kleen
2008-07-09 7:38 ` [PATCH] x86: introduce page_size_mask for 64bit Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200807111841.55403.yhlu.kernel@gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=suresh.b.siddha@intel.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.