All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Suresh Siddha <suresh.b.siddha@intel.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86: let 32bit use apic_ops too - fix
Date: Sun, 13 Jul 2008 22:19:35 -0700	[thread overview]
Message-ID: <200807132219.35814.yhlu.kernel@gmail.com> (raw)
In-Reply-To: <200807111841.55403.yhlu.kernel@gmail.com>


fix for pv.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

---
 arch/x86/kernel/paravirt.c |    5 ----
 arch/x86/kernel/vmi_32.c   |   51 ++++++++++++++++++++++++++++++++++++++++++---
 arch/x86/xen/enlighten.c   |   19 +++++++---------
 include/asm-x86/paravirt.h |   29 -------------------------
 4 files changed, 57 insertions(+), 47 deletions(-)

Index: linux-2.6/arch/x86/kernel/paravirt.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/paravirt.c
+++ linux-2.6/arch/x86/kernel/paravirt.c
@@ -373,11 +373,6 @@ struct pv_cpu_ops pv_cpu_ops = {
 
 struct pv_apic_ops pv_apic_ops = {
 #ifdef CONFIG_X86_LOCAL_APIC
-#ifndef CONFIG_X86_64
-	.apic_write = native_apic_mem_write,
-	.apic_write_atomic = native_apic_mem_write_atomic,
-	.apic_read = native_apic_mem_read,
-#endif
 	.setup_boot_clock = setup_boot_APIC_clock,
 	.setup_secondary_clock = setup_secondary_APIC_clock,
 	.startup_ipi_hook = paravirt_nop,
Index: linux-2.6/arch/x86/kernel/vmi_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/vmi_32.c
+++ linux-2.6/arch/x86/kernel/vmi_32.c
@@ -676,6 +676,50 @@ static inline int __init probe_vmi_rom(v
 	return 0;
 }
 
+#ifdef CONFIG_X86_LOCAL_APIC
+static u32 vmi_apic_read(u32 reg)
+{
+	return 0;
+}
+
+static void vmi_apic_write(u32 reg, u32 val)
+{
+	/* Warn to see if there's any stray references */
+	WARN_ON(1);
+}
+
+static u64 vmi_apic_icr_read(void)
+{
+	return 0;
+}
+
+static void vmi_apic_icr_write(u32 low, u32 id)
+{
+	/* Warn to see if there's any stray references */
+	WARN_ON(1);
+}
+
+static void vmi_apic_wait_icr_idle(void)
+{
+	return;
+}
+
+static u32 vmi_safe_apic_wait_icr_idle(void)
+{
+	return 0;
+}
+
+static struct apic_ops vmi_basic_apic_ops = {
+        .read = vmi_apic_read,
+        .write = vmi_apic_write,
+        .write_atomic = vmi_apic_write,
+        .icr_read = vmi_apic_icr_read,
+        .icr_write = vmi_apic_icr_write,
+        .wait_icr_idle = vmi_apic_wait_icr_idle,
+        .safe_wait_icr_idle = vmi_safe_apic_wait_icr_idle,
+};
+#endif
+
 /*
  * VMI setup common to all processors
  */
@@ -904,9 +948,10 @@ static inline int __init activate_vmi(vo
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
-	para_fill(pv_apic_ops.apic_read, APICRead);
-	para_fill(pv_apic_ops.apic_write, APICWrite);
-	para_fill(pv_apic_ops.apic_write_atomic, APICWrite);
+	para_fill(vmi_basic_apic_ops.read, APICRead);
+	para_fill(vmi_basic_apic_ops.write, APICWrite);
+	para_fill(vmi_basic_apic_ops.write_atomic, APICWrite);
+	apic_ops = &vmi_basic_apic_ops;
 #endif
 
 	/*
Index: linux-2.6/arch/x86/xen/enlighten.c
===================================================================
--- linux-2.6.orig/arch/x86/xen/enlighten.c
+++ linux-2.6/arch/x86/xen/enlighten.c
@@ -587,7 +587,6 @@ static void xen_apic_write(u32 reg, u32
 	WARN_ON(1);
 }
 
-#ifdef CONFIG_X86_64
 static u64 xen_apic_icr_read(void)
 {
 	return 0;
@@ -604,6 +603,11 @@ static void xen_apic_wait_icr_idle(void)
         return;
 }
 
+static u32 xen_safe_apic_wait_icr_idle(void)
+{
+        return 0;
+}
+
 static struct apic_ops xen_basic_apic_ops = {
 	.read = xen_apic_read,
 	.write = xen_apic_write,
@@ -611,9 +615,8 @@ static struct apic_ops xen_basic_apic_op
 	.icr_read = xen_apic_icr_read,
 	.icr_write = xen_apic_icr_write,
 	.wait_icr_idle = xen_apic_wait_icr_idle,
-	.safe_wait_icr_idle = xen_apic_wait_icr_idle,
+	.safe_wait_icr_idle = xen_safe_apic_wait_icr_idle,
 };
-#endif
 
 #endif
 
@@ -1298,11 +1301,6 @@ static const struct pv_irq_ops xen_irq_o
 
 static const struct pv_apic_ops xen_apic_ops __initdata = {
 #ifdef CONFIG_X86_LOCAL_APIC
-#ifndef CONFIG_X86_64
-	.apic_write = xen_apic_write,
-	.apic_write_atomic = xen_apic_write,
-	.apic_read = xen_apic_read,
-#endif
 	.setup_boot_clock = paravirt_nop,
 	.setup_secondary_clock = paravirt_nop,
 	.startup_ipi_hook = paravirt_nop,
@@ -1704,9 +1702,10 @@ asmlinkage void __init xen_start_kernel(
 	pv_irq_ops = xen_irq_ops;
 	pv_apic_ops = xen_apic_ops;
 	pv_mmu_ops = xen_mmu_ops;
-#ifdef CONFIG_X86_64
+
+#ifdef CONFIG_X86_LOCAL_APIC
 	/*
-	 * for 64bit, set up the basic apic ops aswell.
+	 * set up the basic apic ops.
 	 */
 	apic_ops = &xen_basic_apic_ops;
 #endif
Index: linux-2.6/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6.orig/include/asm-x86/paravirt.h
+++ linux-2.6/include/asm-x86/paravirt.h
@@ -200,15 +200,6 @@ struct pv_irq_ops {
 
 struct pv_apic_ops {
 #ifdef CONFIG_X86_LOCAL_APIC
-#ifndef CONFIG_X86_64
-	/*
-	 * Direct APIC operations, principally for VMI.  Ideally
-	 * these shouldn't be in this interface.
-	 */
-	void (*apic_write)(u32 reg, u32 v);
-	void (*apic_write_atomic)(u32 reg, u32 v);
-	u32 (*apic_read)(u32 reg);
-#endif
 	void (*setup_boot_clock)(void);
 	void (*setup_secondary_clock)(void);
 
@@ -901,26 +892,6 @@ static inline void slow_down_io(void)
 }
 
 #ifdef CONFIG_X86_LOCAL_APIC
-/*
- * Basic functions accessing APICs.
- */
-#ifndef CONFIG_X86_64
-static inline void apic_write(u32 reg, u32 v)
-{
-	PVOP_VCALL2(pv_apic_ops.apic_write, reg, v);
-}
-
-static inline void apic_write_atomic(u32 reg, u32 v)
-{
-	PVOP_VCALL2(pv_apic_ops.apic_write_atomic, reg, v);
-}
-
-static inline u32 apic_read(u32 reg)
-{
-	return PVOP_CALL1(unsigned long, pv_apic_ops.apic_read, reg);
-}
-#endif
-
 static inline void setup_boot_clock(void)
 {
 	PVOP_VCALL0(pv_apic_ops.setup_boot_clock);

  parent reply	other threads:[~2008-07-14  5:20 UTC|newest]

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-07-08  8:41 [PATCH] x86: introduce page_size_mask for 64bit Yinghai Lu
2008-07-08  8:43 ` [PATCH] x86: not overmap than end in init_memory_mapping - 64bit Yinghai Lu
2008-07-09  7:38   ` Ingo Molnar
2008-07-09  8:34     ` Ingo Molnar
2008-07-09  8:37       ` Yinghai Lu
2008-07-09  8:46         ` Ingo Molnar
2008-07-09  8:58           ` Yinghai Lu
2008-07-09 10:01           ` Yinghai Lu
2008-07-09 10:30             ` Ingo Molnar
2008-07-09  8:45       ` Ingo Molnar
2008-07-10  3:15   ` [PATCh] x86: overmapped fix when 4K pages on tail " Yinghai Lu
2008-07-10  3:16     ` [PATCH] x86: merge __acpi_map_table Yinghai Lu
2008-07-10  3:17       ` [PATCH] x86: make e820_end return end_of_ram again for 64bit Yinghai Lu
2008-07-10  7:00         ` Ingo Molnar
2008-07-10 11:17         ` [PATCH] x86: e820 remove the range instead of update it to reserved Yinghai Lu
2008-07-11  8:20           ` Ingo Molnar
2008-07-11  3:36         ` [PATCH] x86: save slit Yinghai Lu
2008-07-11  8:22           ` Ingo Molnar
2008-07-11  3:38         ` [PATCH] x86: introduce max_low_pfn_mapped for 64bit Yinghai Lu
2008-07-11  8:26           ` Ingo Molnar
2008-07-11  8:39             ` Yinghai Lu
2008-07-11  8:51               ` Ingo Molnar
2008-07-12  1:41           ` [PATCH] x86: let 32bit use apic_ops too Yinghai Lu
2008-07-12  1:43             ` [PATCH] x86: mach_apicdef.h need to include before smp.h Yinghai Lu
2008-07-12  1:44               ` [PATCH] x86: make read_apic_id return final apicid Yinghai Lu
2008-07-12  8:01                 ` [PATCH] x86: make 64bit have get_apic_id Yinghai Lu
2008-07-13  6:28                   ` Ingo Molnar
2008-07-13  6:59                     ` Ingo Molnar
2008-07-13  7:05                       ` Yinghai Lu
2008-07-13  9:23                         ` Ingo Molnar
2008-07-13  9:28                           ` Ingo Molnar
2008-07-13 16:15                             ` Suresh Siddha
2008-07-13  1:19                 ` [PATCH] x86: make read_apic_id return final apicid Suresh Siddha
2008-07-13  1:08             ` [PATCH] x86: let 32bit use apic_ops too Suresh Siddha
2008-07-13  2:04               ` Yinghai Lu
2008-07-13 16:28                 ` Suresh Siddha
2008-07-13 16:51                   ` Maciej W. Rozycki
2008-07-13 17:16                     ` Cyrill Gorcunov
2008-07-13 23:46                       ` Maciej W. Rozycki
2008-07-14 16:48                         ` Cyrill Gorcunov
2008-07-14 17:20                           ` Maciej W. Rozycki
2008-07-14 18:09                             ` Cyrill Gorcunov
2008-07-14 18:24                               ` Maciej W. Rozycki
2008-07-14 18:32                                 ` Cyrill Gorcunov
2008-07-13  1:43             ` Maciej W. Rozycki
2008-07-13  1:45               ` Yinghai Lu
2008-07-13  1:54                 ` Maciej W. Rozycki
2008-07-13 16:43                   ` Suresh Siddha
2008-07-13 17:05                     ` Maciej W. Rozycki
2008-07-14  5:19             ` Yinghai Lu [this message]
2008-07-14  7:12               ` [PATCH] x86: let 32bit use apic_ops too - fix Ingo Molnar
2008-07-14 16:49                 ` Suresh Siddha
2008-07-14 17:00                   ` Yinghai Lu
2008-07-14 18:03                     ` Suresh Siddha
2008-07-18 17:06                   ` Ingo Molnar
2008-07-15 17:33               ` Suresh Siddha
2008-07-15 18:10                 ` Yinghai Lu
2008-07-15 18:27                   ` Suresh Siddha
2008-07-18 17:07                 ` Ingo Molnar
2008-07-12 21:30           ` [PATCH] x86: max_low_pfn_mapped fix #1 Yinghai Lu
2008-07-13  9:45             ` Ingo Molnar
2008-07-12 21:31           ` [PATCH] x86: max_low_pfn_mapped fix #2 Yinghai Lu
2008-07-12 21:32           ` [PATCH] x86: max_low_pfn_mapped fix #3 Yinghai Lu
2008-07-13 21:29             ` [PATCH] x86: max_low_pfn_mapped fix #4 Yinghai Lu
2008-07-13 21:30             ` [PATCH] x86: get x86_phys_bits early Yinghai Lu
2008-07-13 21:32             ` [PATCH] x86: make 64bit hpet_set_mapping to use ioremap too Yinghai Lu
2008-07-13 21:50               ` [PATCH] x86: make 64bit hpet_set_mapping to use ioremap too v2 Yinghai Lu
2008-07-10  6:54       ` [PATCH] x86: merge __acpi_map_table Ingo Molnar
2008-07-10  6:53     ` [PATCh] x86: overmapped fix when 4K pages on tail - 64bit Ingo Molnar
2008-07-10  6:57       ` Yinghai Lu
2008-07-10  7:20         ` Ingo Molnar
2008-07-10  7:32           ` Yinghai Lu
2008-07-10 14:16     ` Arjan van de Ven
2008-07-13 14:57       ` Andi Kleen
2008-07-13 15:33         ` Arjan van de Ven
2008-07-13 18:25           ` Andi Kleen
2008-07-13 18:17         ` Yinghai Lu
2008-07-13 18:48           ` Andi Kleen
2008-07-13 19:00             ` Yinghai Lu
2008-07-13 20:32             ` Ingo Molnar
2008-07-13 20:51               ` Andi Kleen
2008-07-14  0:04                 ` H. Peter Anvin
2008-07-14  6:39                   ` Andi Kleen
2008-07-09  7:38 ` [PATCH] x86: introduce page_size_mask for 64bit Ingo Molnar
  -- strict thread matches above, loose matches on Subject: below --
2008-07-15 18:38 Patch from LKML Zachary Amsden
2008-07-15 18:51 ` [PATCH] x86: let 32bit use apic_ops too - fix Suresh Siddha
2008-07-15 19:04   ` Zachary Amsden
2008-07-15 19:10     ` Yinghai Lu
2008-07-15 19:19       ` Zachary Amsden
2008-07-15 19:22   ` Yinghai Lu
2008-07-15 19:24     ` Zachary Amsden

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200807132219.35814.yhlu.kernel@gmail.com \
    --to=yhlu.kernel@gmail.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=suresh.b.siddha@intel.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.