All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg KH <greg@kroah.com>
To: Jean Delvare <khali@linux-fr.org>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	lm-sensors <lm-sensors@lm-sensors.org>,
	Kay Sievers <kay.sievers@vrfy.org>
Subject: Re: [lm-sensors] [PATCH 2/5] i5k_amb: Load automatically on all
Date: Tue, 11 Nov 2008 06:26:55 +0000	[thread overview]
Message-ID: <20081111062655.GI13156@kroah.com> (raw)
In-Reply-To: <20081108120950.397a3165@hyperion.delvare>

On Sat, Nov 08, 2008 at 12:09:50PM +0100, Jean Delvare wrote:
> Hi Darrick,
> 
> On Fri, 07 Nov 2008 10:56:31 -0800, Darrick J. Wong wrote:
> > It turns out that we cannot create a pci_driver in this driver because PCI will
> > not call this module's probe function if the i5000-edac driver is already
> > loaded.
> 
> I seem to recall work in progress to let multiple drivers bind to the
> same PCI device. Greg, Kay, what's the status?

Hannes provided me with a bunch of patches, some of which applied, some
didn't.  I had to back some of them out as they were wrong, and I need
to revisit them when I get a chance :(

thanks,

greg k-h

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

WARNING: multiple messages have this Message-ID (diff)
From: Greg KH <greg@kroah.com>
To: Jean Delvare <khali@linux-fr.org>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	lm-sensors <lm-sensors@lm-sensors.org>,
	Kay Sievers <kay.sievers@vrfy.org>
Subject: Re: [PATCH 2/5] i5k_amb: Load automatically on all 5000/5400 chipsets
Date: Mon, 10 Nov 2008 22:26:55 -0800	[thread overview]
Message-ID: <20081111062655.GI13156@kroah.com> (raw)
In-Reply-To: <20081108120950.397a3165@hyperion.delvare>

On Sat, Nov 08, 2008 at 12:09:50PM +0100, Jean Delvare wrote:
> Hi Darrick,
> 
> On Fri, 07 Nov 2008 10:56:31 -0800, Darrick J. Wong wrote:
> > It turns out that we cannot create a pci_driver in this driver because PCI will
> > not call this module's probe function if the i5000-edac driver is already
> > loaded.
> 
> I seem to recall work in progress to let multiple drivers bind to the
> same PCI device. Greg, Kay, what's the status?

Hannes provided me with a bunch of patches, some of which applied, some
didn't.  I had to back some of them out as they were wrong, and I need
to revisit them when I get a chance :(

thanks,

greg k-h

  reply	other threads:[~2008-11-11  6:26 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-07 18:56 [lm-sensors] [PATCH 0/5] Various hwmon patches Darrick J. Wong
2008-11-07 18:56 ` Darrick J. Wong
2008-11-07 18:56 ` [lm-sensors] [PATCH 1/5] adt7462: New hwmon driver Darrick J. Wong
2008-11-07 18:56   ` Darrick J. Wong
2008-11-07 19:04   ` [lm-sensors] " Harvey Harrison
2008-11-07 19:04     ` Harvey Harrison
2008-11-07 19:27     ` [lm-sensors] " Andrew Morton
2008-11-07 19:27       ` Andrew Morton
2008-11-07 19:34       ` [lm-sensors] " Darrick J. Wong
2008-11-07 19:34         ` Darrick J. Wong
2008-11-07 19:38     ` [lm-sensors] " Darrick J. Wong
2008-11-07 19:38       ` Darrick J. Wong
2008-11-07 19:18   ` [lm-sensors] " Andrew Morton
2008-11-07 19:18     ` Andrew Morton
2008-11-07 18:56 ` [lm-sensors] [PATCH 2/5] i5k_amb: Load automatically on all Darrick J. Wong
2008-11-07 18:56   ` [PATCH 2/5] i5k_amb: Load automatically on all 5000/5400 chipsets Darrick J. Wong
2008-11-08 11:09   ` [lm-sensors] [PATCH 2/5] i5k_amb: Load automatically on all Jean Delvare
2008-11-08 11:09     ` [PATCH 2/5] i5k_amb: Load automatically on all 5000/5400 chipsets Jean Delvare
2008-11-11  6:26     ` Greg KH [this message]
2008-11-11  6:26       ` Greg KH
2008-11-07 18:56 ` [lm-sensors] [PATCH 3/5] adt7470: Check input range when sysfs Darrick J. Wong
2008-11-07 18:56   ` [PATCH 3/5] adt7470: Check input range when sysfs files are written Darrick J. Wong
2008-11-11  0:22   ` [lm-sensors] [PATCH 3/5] adt7470: Check input range when sysfs Andrew Morton
2008-11-11  0:22     ` [PATCH 3/5] adt7470: Check input range when sysfs files are written Andrew Morton
2008-11-11  0:49     ` [lm-sensors] [PATCH 3/5] adt7470: Check input range when sysfs Darrick J. Wong
2008-11-11  0:49       ` [PATCH 3/5] adt7470: Check input range when sysfs files are written Darrick J. Wong
2008-11-07 18:56 ` [lm-sensors] [PATCH 4/5] adt7473: Check inputs from sysfs writes Darrick J. Wong
2008-11-07 18:56   ` Darrick J. Wong
2008-11-07 19:20   ` [lm-sensors] " Andrew Morton
2008-11-07 19:20     ` Andrew Morton
2008-11-07 20:35     ` [lm-sensors] " Jean Delvare
2008-11-07 20:35       ` Jean Delvare
2008-11-07 20:49     ` [lm-sensors] " Joe Perches
2008-11-07 20:49       ` Joe Perches
2008-11-07 21:00       ` [lm-sensors] " Jean Delvare
2008-11-07 21:00         ` Jean Delvare
2008-11-07 21:02         ` [lm-sensors] " Randy Dunlap
2008-11-07 21:02           ` Randy Dunlap
2008-11-07 18:56 ` [lm-sensors] [PATCH 5/5] lm85: Support adt7468 chips Darrick J. Wong
2008-11-07 18:56   ` Darrick J. Wong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081111062655.GI13156@kroah.com \
    --to=greg@kroah.com \
    --cc=akpm@linux-foundation.org \
    --cc=djwong@us.ibm.com \
    --cc=kay.sievers@vrfy.org \
    --cc=khali@linux-fr.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.