Re: [PATCH] drivers/serial/8250_pci.c (add support for '8-port RS-232 MIC-3620 from advantech'

[Michael Bramer <michael@debsupport.de>]

On Tue, Jan 20, 2009 at 06:12:16PM +0300, Andrey Panin wrote:
> On 019, 01 19, 2009 at 11:51:22PM +0000, Michael Bramer wrote:
> > On Mon, Jan 19, 2009 at 05:51:01PM +0300, Andrey Panin wrote:
> > > On 018, 01 18, 2009 at 01:53:59PM +0000, Michael Bramer wrote:
> > > > +        * ADVANTECH
> > > > +        */
> > > > +       {
> > > > +               .vendor         = PCI_VENDOR_ID_ADVANTECH,
> > > > +               .device         = PCI_DEVICE_ID_ADVANTECH_PCI3620,
> > > > +               .subvendor      = PCI_DEVICE_ID_ADVANTECH_PCI3620,
> > > > +               .subdevice      = PCI_ANY_ID,
> > > > +               .setup          = pci_default_setup,
> > > > +       },
> > > > +       /*
> > > >          * AFAVLAB cards - these may be called via parport_serial
> > > >          *  It is not clear whether this applies to all products.
> > > >          */
> > > 
> > > This part is not needed at all, pci_default_setup() will be used by default.
> > 
> > ok. I don't test this. But you are right. The last entry in
> > pci_serial_quirks should catch it. 
> > 
> > Should I post a new patch, without this 10 lines?
> 
> Yes and add Signed-off-by: line please.


the new patch:
--------------
This Patch add the device information for the 
MIC-3620 8-port RS-232 cPCI card from Advantech Co. Ltd.

Signed-off-by: Michael Bramer <grisu@deb-support.de>
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -31,6 +31,7 @@
 #include "8250.h"

 #undef SERIAL_DEBUG_PCI
+#define SERIAL_DEBUG_PCI

 /*
  * init function returns:
@@ -768,6 +769,8 @@
 #define PCI_SUBDEVICE_ID_OCTPRO422     0x0208
 #define PCI_SUBDEVICE_ID_POCTAL232     0x0308
 #define PCI_SUBDEVICE_ID_POCTAL422     0x0408
+#define PCI_VENDOR_ID_ADVANTECH         0x13fe
+#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620

 /*
  * Master list of serial port init/setup/exit quirks.
@@ -2041,6 +2054,9 @@
 #endif

 static struct pci_device_id serial_pci_tbl[] = {
+       {       PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
+               0x3620, PCI_ANY_ID, 0, 0,
+               pbn_b2_8_921600 },
        {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
                PCI_SUBVENDOR_ID_CONNECT_TECH,
                PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
--------------

Gruss
Grisu
-- 
Michael Bramer  -- http://www.feuerwehr.kreuzau.de/wiki/
PGP: finger grisu@db.debian.org  -- Linux Sysadmin   -- Use Debian Linux
"Wenn ich die Folgen geahnt hätte, wäre ich Uhrmacher geworden!"
                                                 --- Albert Einstein
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html