From: Michael Bramer <michael@debsupport.de>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Niels de Vos <niels.devos@wincor-nixdorf.com>,
Paulius Zaleckas <paulius.zaleckas@teltonika.lt>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
Subject: Re: [PATCH] drivers/serial/8250_pci.c (add support for '8-port RS-232 MIC-3620 from advantech'
Date: Wed, 21 Jan 2009 23:42:41 +0000 [thread overview]
Message-ID: <20090121234241.GB10645@deb-support.de> (raw)
In-Reply-To: <20090121123215.1b3acc4d@lxorguk.ukuu.org.uk>
On Wed, Jan 21, 2009 at 12:32:15PM +0000, Alan Cox wrote:
> > >> static struct pci_device_id serial_pci_tbl[] = {
> > >> + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
> > >> + 0x3620, PCI_ANY_ID, 0, 0,
> >
> > Why not use PCI_VENDOR_ID_ADVANTECH as PCI_SUBVENDOR_ID too?
>
> The Advantech vendor id is not 0x3620. This confused me as well which is
> why I asked for an lspci. Advantech has stuck the device id in the
> subvendor bits and '1' in the subdevice (so it should be 1 not
> PCI_ANY_ID).
is this better?
+ { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
+ PCI_DEVICE_ID_ADVANTECH_PCI3620, 1, 0, 0,
Gruss
Grisu
--
Michael Bramer -- http://www.feuerwehr.kreuzau.de/wiki/
PGP: finger grisu@db.debian.org -- Linux Sysadmin -- Use Debian Linux
"Wenn ich die Folgen geahnt hätte, wäre ich Uhrmacher geworden!"
--- Albert Einstein
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Michael Bramer <michael@debsupport.de>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Niels de Vos <niels.devos@wincor-nixdorf.com>,
Paulius Zaleckas <paulius.zaleckas@teltonika.lt>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
Subject: Re: [PATCH] drivers/serial/8250_pci.c (add support for '8-port RS-232 MIC-3620 from advantech'
Date: Wed, 21 Jan 2009 23:42:41 +0000 [thread overview]
Message-ID: <20090121234241.GB10645@deb-support.de> (raw)
In-Reply-To: <20090121123215.1b3acc4d@lxorguk.ukuu.org.uk>
On Wed, Jan 21, 2009 at 12:32:15PM +0000, Alan Cox wrote:
> > >> static struct pci_device_id serial_pci_tbl[] = {
> > >> + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
> > >> + 0x3620, PCI_ANY_ID, 0, 0,
> >
> > Why not use PCI_VENDOR_ID_ADVANTECH as PCI_SUBVENDOR_ID too?
>
> The Advantech vendor id is not 0x3620. This confused me as well which is
> why I asked for an lspci. Advantech has stuck the device id in the
> subvendor bits and '1' in the subdevice (so it should be 1 not
> PCI_ANY_ID).
is this better?
+ { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
+ PCI_DEVICE_ID_ADVANTECH_PCI3620, 1, 0, 0,
Gruss
Grisu
--
Michael Bramer -- http://www.feuerwehr.kreuzau.de/wiki/
PGP: finger grisu@db.debian.org -- Linux Sysadmin -- Use Debian Linux
"Wenn ich die Folgen geahnt hätte, wäre ich Uhrmacher geworden!"
--- Albert Einstein
next prev parent reply other threads:[~2009-01-21 23:42 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-18 13:53 [PATCH] drivers/serial/8250_pci.c (add support for '8-port RS-232 MIC-3620 from advantech' Michael Bramer
2009-01-18 13:53 ` Michael Bramer
2009-01-18 14:14 ` Alan Cox
2009-01-19 11:45 ` Michael Bramer
2009-01-19 11:45 ` Michael Bramer
2009-01-19 14:51 ` Andrey Panin
2009-01-19 23:51 ` Michael Bramer
2009-01-19 23:51 ` Michael Bramer
2009-01-20 15:12 ` Andrey Panin
2009-01-21 7:52 ` Michael Bramer
2009-01-21 7:52 ` Michael Bramer
2009-01-21 8:18 ` Paulius Zaleckas
2009-01-21 8:40 ` Niels de Vos
2009-01-21 12:32 ` Alan Cox
2009-01-21 23:42 ` Michael Bramer [this message]
2009-01-21 23:42 ` Michael Bramer
2009-01-22 8:21 ` Tosoni
2009-01-22 8:21 ` Tosoni
2009-01-22 9:03 ` Niels de Vos
2009-01-22 11:00 ` Michael Bramer
2009-01-22 11:00 ` Michael Bramer
2009-01-22 11:47 ` Paulius Zaleckas
2009-01-22 16:44 ` Michael Bramer
2009-01-21 23:40 ` Michael Bramer
2009-01-21 23:40 ` Michael Bramer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090121234241.GB10645@deb-support.de \
--to=michael@debsupport.de \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=niels.devos@wincor-nixdorf.com \
--cc=paulius.zaleckas@teltonika.lt \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.