From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Pierre Ossman <drzeus@drzeus.cx>
Cc: Ben Dooks <ben-linux@fluff.org>, Arnd Bergmann <arnd@arndb.de>,
Liu Dave <DaveLiu@freescale.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
sdhci-devel@list.drzeus.cx,
Pierre Ossman <drzeus-sdhci@drzeus.cx>
Subject: Re: [PATCH 05/13] sdhci: Add support for card-detection polling
Date: Wed, 4 Mar 2009 20:49:17 +0300 [thread overview]
Message-ID: <20090304174917.GD7477@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090221165821.1239aa5a@mjolnir.ossman.eu>
On Sat, Feb 21, 2009 at 04:58:21PM +0100, Pierre Ossman wrote:
> On Fri, 13 Feb 2009 17:47:18 +0300
> Anton Vorontsov <avorontsov@ru.mvista.com> wrote:
>
> > @@ -1110,13 +1113,18 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
> >
> > host->mrq = mrq;
> >
> > + if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
> > + goto send;
> > +
> > if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
> > || (host->flags & SDHCI_DEVICE_DEAD)) {
> > host->mrq->cmd->error = -ENOMEDIUM;
> > tasklet_schedule(&host->finish_tasklet);
> > - } else
> > - sdhci_send_command(host, mrq->cmd);
> > -
> > + goto out;
> > + }
> > +send:
> > + sdhci_send_command(host, mrq->cmd);
> > +out:
> > mmiowb();
> > spin_unlock_irqrestore(&host->lock, flags);
> > }
>
> goto:s seem unnecessary here, and your patch is even incorrect as it
> ignores the SDHCI_DEVICE_DEAD flag.
Oops.
> Just modify the if-clause and
> things will work.
That would look horrid...
if ((!(host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
SDHCI_CARD_PRESENT)) ||
(host->flags & SDHCI_DEVICE_DEAD)) {
> Might want to add a comment also to make it more obvious what the
> if-clause does.
Let's try to avoid the if-clause above? How about this:
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 0cbde8e..d71c877 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -167,6 +167,9 @@ static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
{
u32 irqs = SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT;
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ return;
+
if (enable)
sdhci_unmask_irqs(host, irqs);
else
@@ -1096,6 +1099,7 @@ out:
static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct sdhci_host *host;
+ bool present;
unsigned long flags;
host = mmc_priv(mmc);
@@ -1110,8 +1114,14 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->mrq = mrq;
- if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
- || (host->flags & SDHCI_DEVICE_DEAD)) {
+ /* If polling, assume that the card is always present. */
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ present = true;
+ else
+ present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_CARD_PRESENT;
+
+ if (!present || host->flags & SDHCI_DEVICE_DEAD) {
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
} else
@@ -1745,6 +1755,9 @@ int sdhci_add_host(struct sdhci_host *host)
if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
mmc->ocr_avail = 0;
if (caps & SDHCI_CAN_VDD_330)
mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 1c29895..09a4363 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -212,6 +212,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
/* Controller does not provide transfer-complete interrupt when not busy */
#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
+/* Controller has unreliable card detection */
+#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
WARNING: multiple messages have this Message-ID (diff)
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Pierre Ossman <drzeus@drzeus.cx>
Cc: Pierre Ossman <drzeus-sdhci@drzeus.cx>,
Ben Dooks <ben-linux@fluff.org>, Arnd Bergmann <arnd@arndb.de>,
Kumar Gala <galak@kernel.crashing.org>,
Liu Dave <DaveLiu@freescale.com>,
sdhci-devel@list.drzeus.cx, linux-kernel@vger.kernel.org,
linuxppc-dev@ozlabs.org
Subject: Re: [PATCH 05/13] sdhci: Add support for card-detection polling
Date: Wed, 4 Mar 2009 20:49:17 +0300 [thread overview]
Message-ID: <20090304174917.GD7477@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090221165821.1239aa5a@mjolnir.ossman.eu>
On Sat, Feb 21, 2009 at 04:58:21PM +0100, Pierre Ossman wrote:
> On Fri, 13 Feb 2009 17:47:18 +0300
> Anton Vorontsov <avorontsov@ru.mvista.com> wrote:
>
> > @@ -1110,13 +1113,18 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
> >
> > host->mrq = mrq;
> >
> > + if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
> > + goto send;
> > +
> > if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
> > || (host->flags & SDHCI_DEVICE_DEAD)) {
> > host->mrq->cmd->error = -ENOMEDIUM;
> > tasklet_schedule(&host->finish_tasklet);
> > - } else
> > - sdhci_send_command(host, mrq->cmd);
> > -
> > + goto out;
> > + }
> > +send:
> > + sdhci_send_command(host, mrq->cmd);
> > +out:
> > mmiowb();
> > spin_unlock_irqrestore(&host->lock, flags);
> > }
>
> goto:s seem unnecessary here, and your patch is even incorrect as it
> ignores the SDHCI_DEVICE_DEAD flag.
Oops.
> Just modify the if-clause and
> things will work.
That would look horrid...
if ((!(host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
SDHCI_CARD_PRESENT)) ||
(host->flags & SDHCI_DEVICE_DEAD)) {
> Might want to add a comment also to make it more obvious what the
> if-clause does.
Let's try to avoid the if-clause above? How about this:
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 0cbde8e..d71c877 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -167,6 +167,9 @@ static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
{
u32 irqs = SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT;
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ return;
+
if (enable)
sdhci_unmask_irqs(host, irqs);
else
@@ -1096,6 +1099,7 @@ out:
static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct sdhci_host *host;
+ bool present;
unsigned long flags;
host = mmc_priv(mmc);
@@ -1110,8 +1114,14 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->mrq = mrq;
- if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
- || (host->flags & SDHCI_DEVICE_DEAD)) {
+ /* If polling, assume that the card is always present. */
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ present = true;
+ else
+ present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_CARD_PRESENT;
+
+ if (!present || host->flags & SDHCI_DEVICE_DEAD) {
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
} else
@@ -1745,6 +1755,9 @@ int sdhci_add_host(struct sdhci_host *host)
if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
mmc->ocr_avail = 0;
if (caps & SDHCI_CAN_VDD_330)
mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 1c29895..09a4363 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -212,6 +212,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
/* Controller does not provide transfer-complete interrupt when not busy */
#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
+/* Controller has unreliable card detection */
+#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
next prev parent reply other threads:[~2009-03-04 17:49 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-13 14:46 [PATCH RFC 0/13] FSL eSDHC support Anton Vorontsov
2009-02-13 14:46 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 01/13] sdhci: Add quirk for controllers with no end-of-busy IRQ Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 02/13] sdhci: Add support for bus-specific IO memory accessors Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 03/13] sdhci: Split card-detection IRQs management from sdhci_init() Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-21 15:58 ` Pierre Ossman
2009-02-21 15:58 ` Pierre Ossman
2009-02-13 14:47 ` [PATCH 04/13] sdhci: Enable only relevant (DMA/PIO) interrupts during transfers Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 05/13] sdhci: Add support for card-detection polling Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-21 15:58 ` Pierre Ossman
2009-02-21 15:58 ` Pierre Ossman
2009-03-04 17:49 ` Anton Vorontsov [this message]
2009-03-04 17:49 ` Anton Vorontsov
2009-03-08 14:11 ` Pierre Ossman
2009-03-08 14:11 ` Pierre Ossman
2009-03-16 21:05 ` Anton Vorontsov
2009-03-16 21:05 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 06/13] sdhci: Add support for hosts reporting inverted write-protect state Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 07/13] sdhci: Add support for hosts with strict 32 bit addressing Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-21 15:58 ` Pierre Ossman
2009-02-21 15:58 ` Pierre Ossman
2009-03-04 17:48 ` Anton Vorontsov
2009-03-04 17:48 ` Anton Vorontsov
2009-03-08 14:17 ` Pierre Ossman
2009-03-08 14:17 ` Pierre Ossman
2009-02-13 14:47 ` [PATCH 08/13] sdhci: Add get_{max,timeout}_clock callbacks Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 09/13] sdhci: Add set_clock callback and a quirk for nonstandard clocks Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 10/13] sdhci: Add quirk for controllers that need small delays for PIO Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 11/13] sdhci: Add quirk for controllers that need IRQ re-init after reset Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-13 15:47 ` Laurent Pinchart
2009-02-13 15:47 ` Laurent Pinchart
2009-02-13 17:30 ` Anton Vorontsov
2009-02-13 17:30 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 12/13] sdhci: Add quirk for controllers with max. block size up to 4096 bytes Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-21 15:58 ` Pierre Ossman
2009-02-21 15:58 ` Pierre Ossman
2009-03-04 17:47 ` Anton Vorontsov
2009-03-04 17:47 ` Anton Vorontsov
2009-03-08 14:21 ` Pierre Ossman
2009-03-08 14:21 ` Pierre Ossman
2009-02-13 14:47 ` [PATCH 13/13] mmc: Add OpenFirmware bindings for SDHCI driver Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov
2009-02-17 16:31 ` [PATCH RFC 0/13] FSL eSDHC support Ben Dooks
2009-02-17 16:31 ` Ben Dooks
-- strict thread matches above, loose matches on Subject: below --
2009-02-20 17:32 [PATCH " Anton Vorontsov
2009-02-20 17:33 ` [PATCH 05/13] sdhci: Add support for card-detection polling Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090304174917.GD7477@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=DaveLiu@freescale.com \
--cc=arnd@arndb.de \
--cc=ben-linux@fluff.org \
--cc=drzeus-sdhci@drzeus.cx \
--cc=drzeus@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=sdhci-devel@list.drzeus.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.