From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
To: Al Viro <viro@ZenIV.linux.org.uk>, Jens Axboe <jens.axboe@oracle.com>
Cc: linux-fsdevel@vger.kernel.org,
Artem Bityutskiy <Artem.Bityutskiy@nokia.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 11/18] NILFS: do not manipulate s_dirt directly
Date: Thu, 09 Jul 2009 11:49:39 +0300 [thread overview]
Message-ID: <20090709084939.12122.64791.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20090709084822.12122.79749.sendpatchset@localhost.localdomain>
... use new VFS helpers instead.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
fs/nilfs2/segment.c | 2 +-
fs/nilfs2/super.c | 18 +++++++++---------
fs/nilfs2/the_nilfs.c | 2 +-
3 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index aa97754..f857eaa 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2052,7 +2052,7 @@ static void nilfs_segctor_complete_write(struct nilfs_sc_info *sci)
if (update_sr) {
nilfs_set_last_segment(nilfs, segbuf->sb_pseg_start,
segbuf->sb_sum.seg_seq, nilfs->ns_cno++);
- sbi->s_super->s_dirt = 1;
+ mark_sb_dirty(sbi->s_super);
clear_bit(NILFS_SC_HAVE_DELTA, &sci->sc_flags);
clear_bit(NILFS_SC_DIRTY, &sci->sc_flags);
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 8e2ec43..4eb2576 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -300,7 +300,7 @@ int nilfs_commit_super(struct nilfs_sb_info *sbi, int dupsb)
memcpy(sbp[1], sbp[0], nilfs->ns_sbsize);
nilfs->ns_sbwtime[1] = t;
}
- sbi->s_super->s_dirt = 0;
+ mark_sb_clean(sbi->s_super);
return nilfs_sync_super(sbi, dupsb);
}
@@ -311,7 +311,7 @@ static void nilfs_put_super(struct super_block *sb)
lock_kernel();
- if (sb->s_dirt)
+ if (is_sb_dirty(sb))
nilfs_write_super(sb);
nilfs_detach_segment_constructor(sbi);
@@ -341,17 +341,17 @@ static void nilfs_put_super(struct super_block *sb)
* @sb: super_block
*
* nilfs_write_super() gets a fs-dependent lock, writes super block(s), and
- * clears s_dirt. This function is called in the section protected by
- * lock_super().
+ * clears the superblock. This function is called in the section protected
+ * by lock_super().
*
- * The s_dirt flag is managed by each filesystem and we protect it by ns_sem
- * of the struct the_nilfs. Lock order must be as follows:
+ * The super block s_dirt flag is managed by each filesystem and we protect
+ * it by ns_sem of the struct the_nilfs. Lock order must be as follows:
*
* 1. lock_super()
* 2. down_write(&nilfs->ns_sem)
*
- * Inside NILFS, locking ns_sem is enough to protect s_dirt and the buffer
- * of the super block (nilfs->ns_sbp[]).
+ * Inside NILFS, locking ns_sem is enough to protect the super block s_dirt
+ * and the buffer of the super block (nilfs->ns_sbp[]).
*
* In most cases, VFS functions call lock_super() before calling these
* methods. So we must be careful not to bring on deadlocks when using
@@ -380,7 +380,7 @@ static void nilfs_write_super(struct super_block *sb)
dupsb = sbp[1] && t > nilfs->ns_sbwtime[1] + NILFS_ALTSB_FREQ;
nilfs_commit_super(sbi, dupsb);
}
- sb->s_dirt = 0;
+ mark_sb_clean(sb);
up_write(&nilfs->ns_sem);
}
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index 8b88898..a275939 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -330,7 +330,7 @@ int load_nilfs(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi)
goto failed;
}
if (ri.ri_need_recovery == NILFS_RECOVERY_SR_UPDATED)
- sbi->s_super->s_dirt = 1;
+ mark_sb_dirty(sbi->s_super);
}
set_nilfs_loaded(nilfs);
--
1.6.0.6
next prev parent reply other threads:[~2009-07-09 7:01 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-09 8:48 [PATCH v3 00/18] periodic write-back timer optimization Artem Bityutskiy
2009-07-09 8:48 ` Artem Bityutskiy
2009-07-09 8:48 ` [PATCH v3 01/18] VFS: introduce helpers for manipulation s_dirty flag Artem Bityutskiy
2009-07-09 8:48 ` [PATCH v3 02/18] AFFS: do not manipulate s_dirt directly Artem Bityutskiy
2009-07-09 8:48 ` [PATCH v3 03/18] BFS: " Artem Bityutskiy
2009-07-09 8:48 ` [PATCH v3 04/18] EXOFS: " Artem Bityutskiy
2009-07-12 9:53 ` Boaz Harrosh
2009-07-12 14:02 ` Artem Bityutskiy
2009-07-12 14:02 ` Artem Bityutskiy
2009-07-09 8:48 ` [PATCH v3 05/18] EXT2: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 06/18] EXT4: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 07/18] FAT: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 08/18] HFS: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 09/18] HFSPLUS: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 10/18] JFFS2: " Artem Bityutskiy
2009-07-09 8:49 ` Artem Bityutskiy [this message]
2009-07-09 8:49 ` [PATCH v3 12/18] reiserfs: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 13/18] SYSV: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 14/18] UDF: " Artem Bityutskiy
2009-07-09 8:50 ` [PATCH v3 15/18] UFS: " Artem Bityutskiy
2009-07-09 8:50 ` [PATCH v3 16/18] VFS: use is_sb_dirty helper Artem Bityutskiy
2009-07-09 8:50 ` [PATCH v3 17/18] rename s_dirt to s_dirty Artem Bityutskiy
2009-07-09 8:50 ` [PATCH v3 18/18] writeback: optimize periodic sync_supers Artem Bityutskiy
2009-07-09 12:37 ` [PATCH v3 00/18] periodic write-back timer optimization Andi Kleen
2009-07-09 13:04 ` Artem Bityutskiy
2009-07-09 13:04 ` Artem Bityutskiy
2009-07-15 6:21 ` Artem Bityutskiy
2009-07-15 6:21 ` Artem Bityutskiy
2009-07-24 15:45 ` Artem Bityutskiy
2009-07-24 15:45 ` Artem Bityutskiy
2009-09-14 15:27 ` Artem Bityutskiy
2009-09-14 15:27 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090709084939.12122.64791.sendpatchset@localhost.localdomain \
--to=artem.bityutskiy@nokia.com \
--cc=jens.axboe@oracle.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=viro@ZenIV.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.