From: Allan Wind <allan_wind@lifeintegrity.com>
To: IDE/ATA development list <linux-ide@vger.kernel.org>,
linux-scsi@vger.kernel.org
Subject: Re: MD/RAID time out writing superblock
Date: Thu, 17 Sep 2009 22:47:58 -0400 [thread overview]
Message-ID: <20090918024758.GC5156@lifeintegrity.com> (raw)
In-Reply-To: <4AB2D15E.3090809@kernel.org>
On 2009-09-18T09:16:30, Tejun Heo wrote:
> Can you please post full log?
The sense key errors starting at 3964586 happened when I disabled
the write cache (`hdparm -W0 /dev/sd{a,b}`).
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.30.4 (root@pawan) (gcc version 4.3.3 (Debian 4.3.3-13) ) #1 SMP Sat Aug 1 13:46:07 EDT 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30.4 root=/dev/md0 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf790000 (usable)
[ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000640000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x640000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FC00000000 write-back
[ 0.000000] 1 base 0400000000 mask FE00000000 write-back
[ 0.000000] 2 base 0600000000 mask FFC0000000 write-back
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 base 00BF800000 mask FFFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf790 max_arch_pfn = 0x100000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009bc00 (usable)
[ 0.000000] modified: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf790000 (usable)
[ 0.000000] modified: 00000000bf790000 - 00000000bf79e000 (ACPI data)
[ 0.000000] modified: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS)
[ 0.000000] modified: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[ 0.000000] modified: 00000000bf7ec000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000640000000 (usable)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf790000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf790000 page 4k
[ 0.000000] kernel direct mapping tables up to bf790000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000640000000
[ 0.000000] 0100000000 - 0640000000 page 2M
[ 0.000000] kernel direct mapping tables up to 640000000 @ 13000-2d000
[ 0.000000] ACPI: RSDP 00000000000f9da0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf790100 00054 (v01 033009 XSDT1608 20090330 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v03 033009 FACP1608 20090330 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7904b0 05A14 (v01 1XDT3 1XDT3003 00000003 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf79e000 00040
[ 0.000000] ACPI: APIC 00000000bf790390 000D2 (v01 033009 APIC1608 20090330 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf790470 0003C (v01 033009 OEMMCFG 20090330 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf79e040 0007A (v01 033009 OEMB1608 20090330 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf79e0c0 00130 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79fbf0 0249F (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000640000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000640000000
[ 0.000000] NODE_DATA [0000000000028000 - 000000000002cfff]
[ 0.000000] bootmap [0000000000100000 - 00000000001c7fff] pages c8
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0640000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001737608] TEXT DATA BSS ==> [0001000000 - 0001737608]
[ 0.000000] #3 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #4 [0001738000 - 0001738178] BRK ==> [0001738000 - 0001738178]
[ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #6 [0000013000 - 0000028000] PGTABLE ==> [0000013000 - 0000028000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe20015dfffff] PMD -> [ffff880028200000-ffff88003d1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00640000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000bf790
[ 0.000000] 0: 0x00100000 -> 0x00640000
[ 0.000000] On node 0 totalpages: 6289179
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 127 pages reserved
[ 0.000000] DMA zone: 3796 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765896 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5429760 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf790000 - 00000000bf79e000
[ 0.000000] PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7d0000
[ 0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
[ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000
[ 0.000000] PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages at ffff88003d200000, static data 72800 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6199452
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30.4 root=/dev/md0 ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:536
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2261.190 MHz processor.
[ 83.997162] Console: colour VGA+ 80x25
[ 83.997164] console [tty0] enabled
[ 83.997449] Checking aperture...
[ 84.003246] No AGP bridge found
[ 84.003284] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 84.009681] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 84.009684] software IO TLB at phys 0x20000000 - 0x24000000
[ 84.191210] Memory: 24737232k/26214400k available (3823k kernel code, 1057684k absent, 419484k reserved, 2177k data, 524k init)
[ 84.191236] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 84.191278] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.38 BogoMIPS (lpj=2261190)
[ 84.191295] Security Framework initialized
[ 84.193407] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 84.200318] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 84.203228] Mount-cache hash table entries: 256
[ 84.203353] Initializing cgroup subsys ns
[ 84.203356] Initializing cgroup subsys cpuacct
[ 84.203361] Initializing cgroup subsys freezer
[ 84.203374] CPU: Physical Processor ID: 1
[ 84.203375] CPU: Processor Core ID: 0
[ 84.203378] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 84.203380] CPU: L2 cache: 256K
[ 84.203381] CPU: L3 cache: 8192K
[ 84.203383] CPU 0/0x10 -> Node 0
[ 84.203393] CPU0: Thermal monitoring enabled (TM1)
[ 84.203397] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 84.203403] using mwait in idle threads.
[ 84.203418] ACPI: Core revision 20090320
[ 84.234438] Setting APIC routing to physical flat
[ 84.234756] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 84.244739] CPU0: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 84.346017] Booting processor 1 APIC 0x12 ip 0x6000
[ 84.356480] Initializing CPU#1
[ 84.416780] Calibrating delay using timer specific routine.. 4520.67 BogoMIPS (lpj=2260337)
[ 84.416786] CPU: Physical Processor ID: 1
[ 84.416787] CPU: Processor Core ID: 1
[ 84.416789] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 84.416790] CPU: L2 cache: 256K
[ 84.416791] CPU: L3 cache: 8192K
[ 84.416793] CPU 1/0x12 -> Node 0
[ 84.416802] CPU1: Thermal monitoring enabled (TM1)
[ 84.416805] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 84.417429] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 84.418109] CPU1: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 84.418130] Skipping synchronization checks as TSC is reliable.
[ 84.418186] Booting processor 2 APIC 0x14 ip 0x6000
[ 84.428533] Initializing CPU#2
[ 84.488616] Calibrating delay using timer specific routine.. 4520.67 BogoMIPS (lpj=2260338)
[ 84.488622] CPU: Physical Processor ID: 1
[ 84.488623] CPU: Processor Core ID: 2
[ 84.488625] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 84.488626] CPU: L2 cache: 256K
[ 84.488627] CPU: L3 cache: 8192K
[ 84.488629] CPU 2/0x14 -> Node 0
[ 84.488638] CPU2: Thermal monitoring enabled (TM1)
[ 84.488641] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 84.489267] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 84.489966] CPU2: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 84.489986] Skipping synchronization checks as TSC is reliable.
[ 84.490043] Booting processor 3 APIC 0x16 ip 0x6000
[ 84.500390] Initializing CPU#3
[ 84.560451] Calibrating delay using timer specific routine.. 4520.67 BogoMIPS (lpj=2260335)
[ 84.560458] CPU: Physical Processor ID: 1
[ 84.560459] CPU: Processor Core ID: 3
[ 84.560461] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 84.560462] CPU: L2 cache: 256K
[ 84.560463] CPU: L3 cache: 8192K
[ 84.560465] CPU 3/0x16 -> Node 0
[ 84.560474] CPU3: Thermal monitoring enabled (TM1)
[ 84.560477] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 84.561102] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 84.561735] CPU3: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 84.561755] Skipping synchronization checks as TSC is reliable.
[ 84.561811] Booting processor 4 APIC 0x11 ip 0x6000
[ 84.572159] Initializing CPU#4
[ 84.632287] Calibrating delay using timer specific routine.. 4520.66 BogoMIPS (lpj=2260333)
[ 84.632295] CPU: Physical Processor ID: 1
[ 84.632296] CPU: Processor Core ID: 0
[ 84.632298] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 84.632300] CPU: L2 cache: 256K
[ 84.632302] CPU: L3 cache: 8192K
[ 84.632304] CPU 4/0x11 -> Node 0
[ 84.632314] CPU4: Thermal monitoring enabled (TM1)
[ 84.632317] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 84.633069] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
[ 84.633910] CPU4: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 84.633935] Skipping synchronization checks as TSC is reliable.
[ 84.633995] Booting processor 5 APIC 0x13 ip 0x6000
[ 84.644242] Initializing CPU#5
[ 84.704123] Calibrating delay using timer specific routine.. 4520.67 BogoMIPS (lpj=2260335)
[ 84.704129] CPU: Physical Processor ID: 1
[ 84.704130] CPU: Processor Core ID: 1
[ 84.704132] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 84.704134] CPU: L2 cache: 256K
[ 84.704135] CPU: L3 cache: 8192K
[ 84.704136] CPU 5/0x13 -> Node 0
[ 84.704145] CPU5: Thermal monitoring enabled (TM1)
[ 84.704148] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 84.704965] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
[ 84.705929] CPU5: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 84.705950] Skipping synchronization checks as TSC is reliable.
[ 84.706005] Booting processor 6 APIC 0x15 ip 0x6000
[ 84.716352] Initializing CPU#6
[ 84.776956] Calibrating delay using timer specific routine.. 4520.67 BogoMIPS (lpj=2260336)
[ 84.776963] CPU: Physical Processor ID: 1
[ 84.776964] CPU: Processor Core ID: 2
[ 84.776966] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 84.776967] CPU: L2 cache: 256K
[ 84.776968] CPU: L3 cache: 8192K
[ 84.776970] CPU 6/0x15 -> Node 0
[ 84.776978] CPU6: Thermal monitoring enabled (TM1)
[ 84.776981] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 84.777797] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
[ 84.778697] CPU6: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 84.778718] Skipping synchronization checks as TSC is reliable.
[ 84.778771] Booting processor 7 APIC 0x17 ip 0x6000
[ 84.789118] Initializing CPU#7
[ 84.848792] Calibrating delay using timer specific routine.. 4520.67 BogoMIPS (lpj=2260336)
[ 84.848798] CPU: Physical Processor ID: 1
[ 84.848799] CPU: Processor Core ID: 3
[ 84.848801] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 84.848803] CPU: L2 cache: 256K
[ 84.848804] CPU: L3 cache: 8192K
[ 84.848805] CPU 7/0x17 -> Node 0
[ 84.848815] CPU7: Thermal monitoring enabled (TM1)
[ 84.848817] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 84.849633] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
[ 84.850565] CPU7: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 84.850585] Skipping synchronization checks as TSC is reliable.
[ 84.850593] Brought up 8 CPUs
[ 84.850595] Total of 8 processors activated (36167.08 BogoMIPS).
[ 84.850860] khelper used greatest stack depth: 5952 bytes left
[ 84.850921] net_namespace: 1832 bytes
[ 84.851122] NET: Registered protocol family 16
[ 84.851378] ACPI: bus type pci registered
[ 84.851458] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 84.851460] PCI: MCFG area at e0000000 reserved in E820
[ 84.859888] PCI: Using MMCONFIG at e0000000 - efffffff
[ 84.859890] PCI: Using configuration type 1 for base access
[ 84.862988] bio: create slab <bio-0> at 0
[ 84.863725] ACPI: EC: Look up EC in DSDT
[ 84.875150] ACPI: Interpreter enabled
[ 84.875152] ACPI: (supports S0 S1 S3 S4 S5)
[ 84.875176] ACPI: Using IOAPIC for interrupt routing
[ 84.886282] ACPI: No dock devices found.
[ 84.886359] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 84.886446] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 84.886449] pci 0000:00:00.0: PME# disabled
[ 84.886499] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 84.886502] pci 0000:00:01.0: PME# disabled
[ 84.886553] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 84.886556] pci 0000:00:03.0: PME# disabled
[ 84.886606] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 84.886609] pci 0000:00:05.0: PME# disabled
[ 84.886661] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 84.886664] pci 0000:00:07.0: PME# disabled
[ 84.886714] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 84.886717] pci 0000:00:08.0: PME# disabled
[ 84.886768] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 84.886771] pci 0000:00:09.0: PME# disabled
[ 84.887421] pci 0000:00:16.0: reg 10 64bit mmio: [0xfaff0000-0xfaff3fff]
[ 84.887476] pci 0000:00:16.1: reg 10 64bit mmio: [0xfafec000-0xfafeffff]
[ 84.887531] pci 0000:00:16.2: reg 10 64bit mmio: [0xfafe8000-0xfafebfff]
[ 84.887586] pci 0000:00:16.3: reg 10 64bit mmio: [0xfafe4000-0xfafe7fff]
[ 84.887640] pci 0000:00:16.4: reg 10 64bit mmio: [0xfafe0000-0xfafe3fff]
[ 84.887695] pci 0000:00:16.5: reg 10 64bit mmio: [0xfafdc000-0xfafdffff]
[ 84.887751] pci 0000:00:16.6: reg 10 64bit mmio: [0xfafd8000-0xfafdbfff]
[ 84.887806] pci 0000:00:16.7: reg 10 64bit mmio: [0xfafd4000-0xfafd7fff]
[ 84.887882] pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f]
[ 84.887945] pci 0000:00:1a.1: reg 20 io port: [0xa480-0xa49f]
[ 84.888008] pci 0000:00:1a.2: reg 20 io port: [0xa400-0xa41f]
[ 84.888075] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfaff6000-0xfaff63ff]
[ 84.888126] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 84.888130] pci 0000:00:1a.7: PME# disabled
[ 84.888166] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfaff8000-0xfaffbfff]
[ 84.888204] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 84.888208] pci 0000:00:1b.0: PME# disabled
[ 84.888254] pci 0000:00:1d.0: reg 20 io port: [0xb000-0xb01f]
[ 84.888318] pci 0000:00:1d.1: reg 20 io port: [0xac00-0xac1f]
[ 84.888382] pci 0000:00:1d.2: reg 20 io port: [0xa880-0xa89f]
[ 84.888450] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfaffc000-0xfaffc3ff]
[ 84.888500] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 84.888504] pci 0000:00:1d.7: PME# disabled
[ 84.888618] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 84.888622] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 84.888626] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 84.888629] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 164c (mask 0007)
[ 84.888632] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 03e8 (mask 0007)
[ 84.888636] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f)
[ 84.888639] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f)
[ 84.888686] pci 0000:00:1f.2: reg 10 io port: [0xcc00-0xcc07]
[ 84.888691] pci 0000:00:1f.2: reg 14 io port: [0xc880-0xc883]
[ 84.888696] pci 0000:00:1f.2: reg 18 io port: [0xc800-0xc807]
[ 84.888701] pci 0000:00:1f.2: reg 1c io port: [0xc480-0xc483]
[ 84.888706] pci 0000:00:1f.2: reg 20 io port: [0xc400-0xc40f]
[ 84.888711] pci 0000:00:1f.2: reg 24 io port: [0xc080-0xc08f]
[ 84.888755] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfaffe000-0xfaffe0ff]
[ 84.888767] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 84.888807] pci 0000:00:1f.5: reg 10 io port: [0xbc00-0xbc07]
[ 84.888812] pci 0000:00:1f.5: reg 14 io port: [0xb880-0xb883]
[ 84.888817] pci 0000:00:1f.5: reg 18 io port: [0xb800-0xb807]
[ 84.888822] pci 0000:00:1f.5: reg 1c io port: [0xb480-0xb483]
[ 84.888827] pci 0000:00:1f.5: reg 20 io port: [0xb400-0xb40f]
[ 84.888832] pci 0000:00:1f.5: reg 24 io port: [0xb080-0xb08f]
[ 84.888895] pci 0000:07:00.0: reg 10 32bit mmio: [0xfbee0000-0xfbefffff]
[ 84.888901] pci 0000:07:00.0: reg 14 32bit mmio: [0xfbec0000-0xfbedffff]
[ 84.888906] pci 0000:07:00.0: reg 18 io port: [0xec00-0xec1f]
[ 84.888912] pci 0000:07:00.0: reg 1c 32bit mmio: [0xfbebc000-0xfbebffff]
[ 84.888926] pci 0000:07:00.0: reg 30 32bit mmio: [0xfbe80000-0xfbe9ffff]
[ 84.888953] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 84.888957] pci 0000:07:00.0: PME# disabled
[ 84.889007] pci 0000:07:00.1: reg 10 32bit mmio: [0xfbe60000-0xfbe7ffff]
[ 84.889013] pci 0000:07:00.1: reg 14 32bit mmio: [0xfbe40000-0xfbe5ffff]
[ 84.889019] pci 0000:07:00.1: reg 18 io port: [0xe880-0xe89f]
[ 84.889024] pci 0000:07:00.1: reg 1c 32bit mmio: [0xfbeb8000-0xfbebbfff]
[ 84.889038] pci 0000:07:00.1: reg 30 32bit mmio: [0xfbe20000-0xfbe3ffff]
[ 84.889065] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
[ 84.889069] pci 0000:07:00.1: PME# disabled
[ 84.889118] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 84.889121] pci 0000:00:01.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 84.889224] pci 0000:03:00.0: reg 10 io port: [0xd000-0xd0ff]
[ 84.889233] pci 0000:03:00.0: reg 14 64bit mmio: [0xfbdfc000-0xfbdfffff]
[ 84.889242] pci 0000:03:00.0: reg 1c 64bit mmio: [0xfbde0000-0xfbdeffff]
[ 84.889251] pci 0000:03:00.0: reg 30 32bit mmio: [0xfba00000-0xfbbfffff]
[ 84.889271] pci 0000:03:00.0: supports D1 D2
[ 84.889299] pci 0000:00:08.0: bridge io port: [0xd000-0xdfff]
[ 84.889302] pci 0000:00:08.0: bridge 32bit mmio: [0xfba00000-0xfbdfffff]
[ 84.889364] pci 0000:01:03.0: reg 10 32bit mmio: [0xf9800000-0xf9ffffff]
[ 84.889370] pci 0000:01:03.0: reg 14 32bit mmio: [0xfb9fc000-0xfb9fffff]
[ 84.889376] pci 0000:01:03.0: reg 18 32bit mmio: [0xfb000000-0xfb7fffff]
[ 84.889448] pci 0000:00:1e.0: transparent bridge
[ 84.889453] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb000000-0xfb9fffff]
[ 84.889459] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf9800000-0xf9ffffff]
[ 84.889486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 84.889798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 84.889925] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 84.889991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 84.890056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT]
[ 84.890121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 84.890186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
[ 84.901004] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 84.901147] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 84.901285] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 84.901425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 84.901564] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 84.901702] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 84.901843] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 84.901980] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 84.902198] SCSI subsystem initialized
[ 84.902293] libata version 3.00 loaded.
[ 84.902392] usbcore: registered new interface driver usbfs
[ 84.902418] usbcore: registered new interface driver hub
[ 84.902454] usbcore: registered new device driver usb
[ 84.902601] PCI: Using ACPI for IRQ routing
[ 84.906718] NetLabel: Initializing
[ 84.906720] NetLabel: domain hash size = 128
[ 84.906722] NetLabel: protocols = UNLABELED CIPSOv4
[ 84.906736] NetLabel: unlabeled traffic allowed by default
[ 84.906875] hpet clockevent registered
[ 84.906879] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 84.906883] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 84.906887] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 84.914709] Switched to high resolution mode on CPU 0
[ 84.914986] Switched to high resolution mode on CPU 1
[ 84.914989] Switched to high resolution mode on CPU 3
[ 84.914992] Switched to high resolution mode on CPU 2
[ 84.915349] Switched to high resolution mode on CPU 4
[ 84.915434] Switched to high resolution mode on CPU 7
[ 84.915437] Switched to high resolution mode on CPU 5
[ 84.915439] Switched to high resolution mode on CPU 6
[ 84.918707] pnp: PnP ACPI init
[ 84.918716] ACPI: bus type pnp registered
[ 84.923466] pnp: PnP ACPI: found 15 devices
[ 84.923468] ACPI: ACPI bus type pnp unregistered
[ 84.923476] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 84.923478] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 84.923481] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 84.923483] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 84.923489] system 00:09: ioport range 0x164e-0x164f has been reserved
[ 84.923493] system 00:0a: ioport range 0x680-0x6ff has been reserved
[ 84.923495] system 00:0a: ioport range 0x295-0x296 has been reserved
[ 84.923500] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 84.923502] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 84.923505] system 00:0b: ioport range 0x500-0x57f could not be reserved
[ 84.923507] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 84.923510] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 84.923512] system 00:0b: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 84.923517] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 84.923519] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 84.923523] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 84.923528] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 84.923530] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 84.923532] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 84.923535] system 00:0e: iomem range 0x100000-0xbf8fffff could not be reserved
[ 84.923537] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
[ 84.928413] pci 0000:00:01.0: PCI bridge, secondary bus 0000:07
[ 84.928416] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 84.928419] pci 0000:00:01.0: MEM window: 0xfbe00000-0xfbefffff
[ 84.928422] pci 0000:00:01.0: PREFETCH window: disabled
[ 84.928427] pci 0000:00:03.0: PCI bridge, secondary bus 0000:06
[ 84.928428] pci 0000:00:03.0: IO window: disabled
[ 84.928432] pci 0000:00:03.0: MEM window: disabled
[ 84.928434] pci 0000:00:03.0: PREFETCH window: disabled
[ 84.928439] pci 0000:00:05.0: PCI bridge, secondary bus 0000:05
[ 84.928440] pci 0000:00:05.0: IO window: disabled
[ 84.928443] pci 0000:00:05.0: MEM window: disabled
[ 84.928446] pci 0000:00:05.0: PREFETCH window: disabled
[ 84.928450] pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
[ 84.928452] pci 0000:00:07.0: IO window: disabled
[ 84.928455] pci 0000:00:07.0: MEM window: disabled
[ 84.928458] pci 0000:00:07.0: PREFETCH window: disabled
[ 84.928462] pci 0000:00:08.0: PCI bridge, secondary bus 0000:03
[ 84.928465] pci 0000:00:08.0: IO window: 0xd000-0xdfff
[ 84.928468] pci 0000:00:08.0: MEM window: 0xfba00000-0xfbdfffff
[ 84.928471] pci 0000:00:08.0: PREFETCH window: disabled
[ 84.928475] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 84.928477] pci 0000:00:09.0: IO window: disabled
[ 84.928480] pci 0000:00:09.0: MEM window: disabled
[ 84.928483] pci 0000:00:09.0: PREFETCH window: disabled
[ 84.928488] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 84.928489] pci 0000:00:1e.0: IO window: disabled
[ 84.928493] pci 0000:00:1e.0: MEM window: 0xfb000000-0xfb9fffff
[ 84.928497] pci 0000:00:1e.0: PREFETCH window: 0x000000f9800000-0x000000f9ffffff
[ 84.928507] pci 0000:00:01.0: setting latency timer to 64
[ 84.928513] pci 0000:00:03.0: setting latency timer to 64
[ 84.928519] pci 0000:00:05.0: setting latency timer to 64
[ 84.928525] pci 0000:00:07.0: setting latency timer to 64
[ 84.928530] pci 0000:00:08.0: setting latency timer to 64
[ 84.928536] pci 0000:00:09.0: setting latency timer to 64
[ 84.928541] pci 0000:00:1e.0: setting latency timer to 64
[ 84.928545] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 84.928547] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 84.928549] pci_bus 0000:07: resource 0 io: [0xe000-0xefff]
[ 84.928551] pci_bus 0000:07: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 84.928553] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 84.928555] pci_bus 0000:03: resource 1 mem: [0xfba00000-0xfbdfffff]
[ 84.928557] pci_bus 0000:01: resource 1 mem: [0xfb000000-0xfb9fffff]
[ 84.928559] pci_bus 0000:01: resource 2 pref mem [0xf9800000-0xf9ffffff]
[ 84.928561] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 84.928563] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 84.928585] NET: Registered protocol family 2
[ 84.934998] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 84.936092] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 84.937542] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 84.937697] TCP: Hash tables configured (established 524288 bind 65536)
[ 84.937699] TCP reno registered
[ 84.940771] NET: Registered protocol family 1
[ 84.942882] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 84.942884] Scanning for low memory corruption every 60 seconds
[ 84.950334] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 84.952092] VFS: Disk quotas dquot_6.5.2
[ 84.952152] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 84.952558] msgmni has been set to 32768
[ 84.952860] alg: No test for stdrng (krng)
[ 84.952867] io scheduler noop registered
[ 84.952869] io scheduler anticipatory registered
[ 84.952870] io scheduler deadline registered
[ 84.952917] io scheduler cfq registered (default)
[ 84.952957] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 84.952959] pci 0000:00:1a.0: Performing full reset
[ 84.952973] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
[ 84.952975] pci 0000:00:1a.1: Performing full reset
[ 84.952989] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 84.952990] pci 0000:00:1a.2: Performing full reset
[ 84.953023] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 84.953025] pci 0000:00:1d.0: Performing full reset
[ 84.953039] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
[ 84.953040] pci 0000:00:1d.1: Performing full reset
[ 84.953054] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 84.953055] pci 0000:00:1d.2: Performing full reset
[ 84.953094] pci 0000:01:03.0: Boot video device
[ 84.953246] alloc irq_desc for 24 on cpu 0 node 0
[ 84.953248] alloc kstat_irqs on cpu 0 node 0
[ 84.953255] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 84.953264] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 84.953407] alloc irq_desc for 25 on cpu 0 node 0
[ 84.953408] alloc kstat_irqs on cpu 0 node 0
[ 84.953414] pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X
[ 84.953423] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 84.953560] alloc irq_desc for 26 on cpu 0 node 0
[ 84.953561] alloc kstat_irqs on cpu 0 node 0
[ 84.953567] pcieport-driver 0000:00:05.0: irq 26 for MSI/MSI-X
[ 84.953576] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 84.953716] alloc irq_desc for 27 on cpu 0 node 0
[ 84.953718] alloc kstat_irqs on cpu 0 node 0
[ 84.953723] pcieport-driver 0000:00:07.0: irq 27 for MSI/MSI-X
[ 84.953732] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 84.953875] alloc irq_desc for 28 on cpu 0 node 0
[ 84.953877] alloc kstat_irqs on cpu 0 node 0
[ 84.953882] pcieport-driver 0000:00:08.0: irq 28 for MSI/MSI-X
[ 84.953891] pcieport-driver 0000:00:08.0: setting latency timer to 64
[ 84.954029] alloc irq_desc for 29 on cpu 0 node 0
[ 84.954030] alloc kstat_irqs on cpu 0 node 0
[ 84.954035] pcieport-driver 0000:00:09.0: irq 29 for MSI/MSI-X
[ 84.954045] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 84.954158] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 84.954165] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 84.954169] aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
[ 84.954173] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 84.954178] aer 0000:00:08.0:pcie02: AER service couldn't init device: no _OSC support
[ 84.954182] aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
[ 84.954202] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 84.954375] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 84.954378] ACPI: Power Button [PWRF]
[ 84.954439] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 84.954444] ACPI: Power Button [PWRB]
[ 84.955031] ACPI: SSDT 00000000bf79e1f0 0033D (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 84.956383] processor ACPI_CPU:00: registered as cooling_device0
[ 84.956842] ACPI: SSDT 00000000bf79e530 0033D (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 84.958186] processor ACPI_CPU:01: registered as cooling_device1
[ 84.958653] ACPI: SSDT 00000000bf79e870 0033D (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 84.959993] processor ACPI_CPU:02: registered as cooling_device2
[ 84.960456] ACPI: SSDT 00000000bf79ebb0 0033D (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 84.961798] processor ACPI_CPU:03: registered as cooling_device3
[ 84.962260] ACPI: SSDT 00000000bf79eef0 0033D (v01 DpgPmm P005Ist 00000012 INTL 20051117)
[ 84.963601] processor ACPI_CPU:04: registered as cooling_device4
[ 84.964063] ACPI: SSDT 00000000bf79f230 0033D (v01 DpgPmm P006Ist 00000012 INTL 20051117)
[ 84.965406] processor ACPI_CPU:05: registered as cooling_device5
[ 84.965879] ACPI: SSDT 00000000bf79f570 0033D (v01 DpgPmm P007Ist 00000012 INTL 20051117)
[ 84.967221] processor ACPI_CPU:06: registered as cooling_device6
[ 84.967689] ACPI: SSDT 00000000bf79f8b0 0033D (v01 DpgPmm P008Ist 00000012 INTL 20051117)
[ 84.969031] processor ACPI_CPU:07: registered as cooling_device7
[ 84.973807] Non-volatile memory driver v1.3
[ 84.973809] Linux agpgart interface v0.103
[ 84.973870] [drm] Initialized drm 1.1.0 20060810
[ 84.973903] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 85.217227] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 85.460763] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 85.704300] serial8250: ttyS2 at I/O 0x3e8 (irq = 5) is a 16550A
[ 85.704545] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 85.704680] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 85.704815] 00:08: ttyS2 at I/O 0x3e8 (irq = 5) is a 16550A
[ 85.705139] Driver 'sd' needs updating - please use bus_type methods
[ 85.705161] Driver 'sr' needs updating - please use bus_type methods
[ 85.705280] ata_piix 0000:00:1f.2: version 2.13
[ 85.705289] alloc irq_desc for 19 on cpu 0 node 0
[ 85.705290] alloc kstat_irqs on cpu 0 node 0
[ 85.705295] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 85.705299] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 85.705327] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 85.705367] scsi0 : ata_piix
[ 85.705448] scsi1 : ata_piix
[ 85.706892] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 85.706896] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 85.706903] work_for_cpu used greatest stack depth: 5120 bytes left
[ 85.706939] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 85.706943] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 85.706967] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 85.706991] scsi2 : ata_piix
[ 85.707059] scsi3 : ata_piix
[ 85.708352] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[ 85.708355] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[ 85.708491] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
[ 85.708493] Copyright (c) 2007-2009 Intel Corporation.
[ 85.708520] alloc irq_desc for 16 on cpu 0 node 0
[ 85.708522] alloc kstat_irqs on cpu 0 node 0
[ 85.708526] igb 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 85.708543] igb 0000:07:00.0: setting latency timer to 64
[ 85.708777] alloc irq_desc for 30 on cpu 0 node 0
[ 85.708779] alloc kstat_irqs on cpu 0 node 0
[ 85.708782] igb 0000:07:00.0: irq 30 for MSI/MSI-X
[ 85.708783] alloc irq_desc for 31 on cpu 0 node 0
[ 85.708785] alloc kstat_irqs on cpu 0 node 0
[ 85.708787] igb 0000:07:00.0: irq 31 for MSI/MSI-X
[ 85.708789] alloc irq_desc for 32 on cpu 0 node 0
[ 85.708790] alloc kstat_irqs on cpu 0 node 0
[ 85.708792] igb 0000:07:00.0: irq 32 for MSI/MSI-X
[ 85.708794] alloc irq_desc for 33 on cpu 0 node 0
[ 85.708795] alloc kstat_irqs on cpu 0 node 0
[ 85.708798] igb 0000:07:00.0: irq 33 for MSI/MSI-X
[ 85.708799] alloc irq_desc for 34 on cpu 0 node 0
[ 85.708801] alloc kstat_irqs on cpu 0 node 0
[ 85.708803] igb 0000:07:00.0: irq 34 for MSI/MSI-X
[ 85.708805] alloc irq_desc for 35 on cpu 0 node 0
[ 85.708806] alloc kstat_irqs on cpu 0 node 0
[ 85.708808] igb 0000:07:00.0: irq 35 for MSI/MSI-X
[ 85.708810] alloc irq_desc for 36 on cpu 0 node 0
[ 85.708812] alloc kstat_irqs on cpu 0 node 0
[ 85.708814] igb 0000:07:00.0: irq 36 for MSI/MSI-X
[ 85.708815] alloc irq_desc for 37 on cpu 0 node 0
[ 85.708817] alloc kstat_irqs on cpu 0 node 0
[ 85.708819] igb 0000:07:00.0: irq 37 for MSI/MSI-X
[ 85.708821] alloc irq_desc for 38 on cpu 0 node 0
[ 85.708822] alloc kstat_irqs on cpu 0 node 0
[ 85.708824] igb 0000:07:00.0: irq 38 for MSI/MSI-X
[ 85.880267] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 85.880270] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:c8:61:b4
[ 85.880346] igb 0000:07:00.0: eth0: PBA No: 0100ff-0ff
[ 85.880348] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 85.880377] alloc irq_desc for 17 on cpu 0 node 0
[ 85.880379] alloc kstat_irqs on cpu 0 node 0
[ 85.880383] igb 0000:07:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 85.880400] igb 0000:07:00.1: setting latency timer to 64
[ 85.880622] alloc irq_desc for 39 on cpu 0 node 0
[ 85.880624] alloc kstat_irqs on cpu 0 node 0
[ 85.880626] igb 0000:07:00.1: irq 39 for MSI/MSI-X
[ 85.880628] alloc irq_desc for 40 on cpu 0 node 0
[ 85.880629] alloc kstat_irqs on cpu 0 node 0
[ 85.880632] igb 0000:07:00.1: irq 40 for MSI/MSI-X
[ 85.880633] alloc irq_desc for 41 on cpu 0 node 0
[ 85.880635] alloc kstat_irqs on cpu 0 node 0
[ 85.880637] igb 0000:07:00.1: irq 41 for MSI/MSI-X
[ 85.880639] alloc irq_desc for 42 on cpu 0 node 0
[ 85.880640] alloc kstat_irqs on cpu 0 node 0
[ 85.880642] igb 0000:07:00.1: irq 42 for MSI/MSI-X
[ 85.880644] alloc irq_desc for 43 on cpu 0 node 0
[ 85.880646] alloc kstat_irqs on cpu 0 node 0
[ 85.880648] igb 0000:07:00.1: irq 43 for MSI/MSI-X
[ 85.880650] alloc irq_desc for 44 on cpu 0 node 0
[ 85.880651] alloc kstat_irqs on cpu 0 node 0
[ 85.880653] igb 0000:07:00.1: irq 44 for MSI/MSI-X
[ 85.880655] alloc irq_desc for 45 on cpu 0 node 0
[ 85.880656] alloc kstat_irqs on cpu 0 node 0
[ 85.880659] igb 0000:07:00.1: irq 45 for MSI/MSI-X
[ 85.880660] alloc irq_desc for 46 on cpu 0 node 0
[ 85.880662] alloc kstat_irqs on cpu 0 node 0
[ 85.880664] igb 0000:07:00.1: irq 46 for MSI/MSI-X
[ 85.880666] alloc irq_desc for 47 on cpu 0 node 0
[ 85.880667] alloc kstat_irqs on cpu 0 node 0
[ 85.880669] igb 0000:07:00.1: irq 47 for MSI/MSI-X
[ 86.023331] ata3: SATA link down (SStatus 0 SControl 300)
[ 86.038966] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 86.038969] igb 0000:07:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:c8:61:b5
[ 86.039045] igb 0000:07:00.1: eth1: PBA No: 0100ff-0ff
[ 86.039047] igb 0000:07:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 86.039080] Fusion MPT base driver 3.04.07
[ 86.039082] Copyright (c) 1999-2008 LSI Corporation
[ 86.039087] Fusion MPT SAS Host driver 3.04.07
[ 86.039117] mptsas 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 86.039142] mptbase: ioc0: Initiating bringup
[ 86.316043] ioc0: LSISAS1068E B3: Capabilities={Initiator}
[ 86.316060] mptsas 0000:03:00.0: setting latency timer to 64
[ 86.475797] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 86.475808] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 86.494922] ata1.00: ATAPI: DV-28S-V, 1.0A, max UDMA/100
[ 86.532861] ata1.00: configured for UDMA/100
[ 86.582976] scsi 0:0:0:0: CD-ROM TEAC DV-28S-V 1.0A PQ: 0 ANSI: 5
[ 86.591721] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 86.591724] Uniform CD-ROM driver Revision: 3.20
[ 86.591837] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 86.591899] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 87.211097] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 87.211105] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 87.525474] ata4: SATA link down (SStatus 0 SControl 300)
[ 87.589626] async/0 used greatest stack depth: 4992 bytes left
[ 98.422283] scsi4 : ioc0: LSISAS1068E B3, FwRev=011a0000h, Ports=1, MaxQ=478, IRQ=16
[ 98.452638] scsi 4:0:0:0: Direct-Access ATA WDC WD2002FYPS-0 5G04 PQ: 0 ANSI: 5
[ 98.453126] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 98.454592] sd 4:0:0:0: [sda] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
[ 98.460108] scsi 4:0:1:0: Direct-Access ATA WDC WD2002FYPS-0 5G04 PQ: 0 ANSI: 5
[ 98.460464] sd 4:0:0:0: [sda] Write Protect is off
[ 98.460467] sd 4:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 98.460934] sd 4:0:1:0: Attached scsi generic sg2 type 0
[ 98.463744] work_for_cpu used greatest stack depth: 4352 bytes left
[ 98.463789] Fusion MPT misc device (ioctl) driver 3.04.07
[ 98.463817] mptctl: Registered with Fusion MPT base driver
[ 98.463818] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 98.463905] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 98.463908] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
[ 98.463935] alloc irq_desc for 18 on cpu 0 node 0
[ 98.463937] alloc kstat_irqs on cpu 0 node 0
[ 98.463941] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 98.463952] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 98.463955] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 98.463994] drivers/usb/core/inode.c: creating file 'devices'
[ 98.464004] drivers/usb/core/inode.c: creating file '001'
[ 98.464028] sd 4:0:1:0: [sdb] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
[ 98.464039] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 98.464046] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 98.464049] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[ 98.464062] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 98.467956] ehci_hcd 0000:00:1a.7: debug port 1
[ 98.467961] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 98.467963] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 98.467973] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfaff6000
[ 98.467977] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 98.470980] sd 4:0:1:0: [sdb] Write Protect is off
[ 98.470982] sd 4:0:1:0: [sdb] Mode Sense: 73 00 00 08
[ 98.471847] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 98.472001] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 98.477215] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 98.477940] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 98.477971] usb usb1: default language 0x0409
[ 98.477978] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 98.477981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 98.477986] usb usb1: Product: EHCI Host Controller
[ 98.477987] usb usb1: Manufacturer: Linux 2.6.30.4 ehci_hcd
[ 98.477989] usb usb1: SerialNumber: 0000:00:1a.7
[ 98.478019] usb usb1: uevent
[ 98.478045] usb usb1: usb_probe_device
[ 98.478048] usb usb1: configuration #1 chosen from 1 choice
[ 98.478053] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 98.478064] usb 1-0:1.0: uevent
[ 98.478087] hub 1-0:1.0: usb_probe_interface
[ 98.478089] hub 1-0:1.0: usb_probe_interface - got id
[ 98.478090] hub 1-0:1.0: USB hub found
[ 98.478095] hub 1-0:1.0: 6 ports detected
[ 98.478097] hub 1-0:1.0: standalone hub
[ 98.478098] hub 1-0:1.0: no power switching (usb 1.0)
[ 98.478099] hub 1-0:1.0: individual port over-current protection
[ 98.478101] hub 1-0:1.0: power on to power good time: 20ms
[ 98.478104] hub 1-0:1.0: local power source is good
[ 98.478105] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 98.478188] drivers/usb/core/inode.c: creating file '001'
[ 98.478254] alloc irq_desc for 23 on cpu 0 node 0
[ 98.478256] alloc kstat_irqs on cpu 0 node 0
[ 98.478260] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 98.478270] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 98.478273] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 98.478302] drivers/usb/core/inode.c: creating file '002'
[ 98.478341] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 98.478347] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 98.478350] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[ 98.478363] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 98.482239] ehci_hcd 0000:00:1d.7: debug port 1
[ 98.482244] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 98.482246] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 98.482256] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfaffc000
[ 98.482260] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 98.486132] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 98.487659] sda:<6> sdb:<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 98.492924] usb usb2: default language 0x0409
[ 98.492931] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 98.492934] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 98.492936] usb usb2: Product: EHCI Host Controller
[ 98.492938] usb usb2: Manufacturer: Linux 2.6.30.4 ehci_hcd
[ 98.492941] usb usb2: SerialNumber: 0000:00:1d.7
[ 98.492976] usb usb2: uevent
[ 98.493000] usb usb2: usb_probe_device
[ 98.493002] usb usb2: configuration #1 chosen from 1 choice
[ 98.493006] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 98.493018] usb 2-0:1.0: uevent
[ 98.493040] hub 2-0:1.0: usb_probe_interface
[ 98.493042] hub 2-0:1.0: usb_probe_interface - got id
[ 98.493043] hub 2-0:1.0: USB hub found
[ 98.493047] hub 2-0:1.0: 6 ports detected
[ 98.493049] hub 2-0:1.0: standalone hub
[ 98.493050] hub 2-0:1.0: no power switching (usb 1.0)
[ 98.493051] hub 2-0:1.0: individual port over-current protection
[ 98.493053] hub 2-0:1.0: power on to power good time: 20ms
[ 98.493055] hub 2-0:1.0: local power source is good
[ 98.493057] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 98.493111] drivers/usb/core/inode.c: creating file '001'
[ 98.493179] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 98.493181] ohci_hcd: block sizes: ed 80 td 96
[ 98.493209] uhci_hcd: USB Universal Host Controller Interface driver
[ 98.493277] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 98.493282] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 98.493284] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 98.493314] drivers/usb/core/inode.c: creating file '003'
[ 98.493349] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 98.493354] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 98.493358] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 98.493360] uhci_hcd 0000:00:1a.0: Performing full reset
[ 98.493372] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 98.493377] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 98.493399] usb usb3: default language 0x0409
[ 98.493404] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 98.493406] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 98.493408] usb usb3: Product: UHCI Host Controller
[ 98.493409] usb usb3: Manufacturer: Linux 2.6.30.4 uhci_hcd
[ 98.493411] usb usb3: SerialNumber: 0000:00:1a.0
[ 98.493442] usb usb3: uevent
[ 98.493463] usb usb3: usb_probe_device
[ 98.493465] usb usb3: configuration #1 chosen from 1 choice
[ 98.493472] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 98.493483] usb 3-0:1.0: uevent
[ 98.493506] hub 3-0:1.0: usb_probe_interface
[ 98.493508] hub 3-0:1.0: usb_probe_interface - got id
[ 98.493509] hub 3-0:1.0: USB hub found
[ 98.493514] hub 3-0:1.0: 2 ports detected
[ 98.493515] hub 3-0:1.0: standalone hub
[ 98.493516] hub 3-0:1.0: no power switching (usb 1.0)
[ 98.493517] hub 3-0:1.0: individual port over-current protection
[ 98.493519] hub 3-0:1.0: power on to power good time: 2ms
[ 98.493522] hub 3-0:1.0: local power source is good
[ 98.493523] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 98.493561] drivers/usb/core/inode.c: creating file '001'
[ 98.493628] alloc irq_desc for 21 on cpu 0 node 0
[ 98.493630] alloc kstat_irqs on cpu 0 node 0
[ 98.493634] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 98.493639] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 98.493642] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 98.493673] drivers/usb/core/inode.c: creating file '004'
[ 98.493713] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 98.493719] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 98.493722] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 98.493724] uhci_hcd 0000:00:1a.1: Performing full reset
[ 98.493736] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 98.493746] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480
[ 98.493771] usb usb4: default language 0x0409
[ 98.493775] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 98.493777] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 98.493779] usb usb4: Product: UHCI Host Controller
[ 98.493781] usb usb4: Manufacturer: Linux 2.6.30.4 uhci_hcd
[ 98.493782] usb usb4: SerialNumber: 0000:00:1a.1
[ 98.493808] usb usb4: uevent
[ 98.493829] usb usb4: usb_probe_device
[ 98.493831] usb usb4: configuration #1 chosen from 1 choice
[ 98.493836] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 98.493848] usb 4-0:1.0: uevent
[ 98.493870] hub 4-0:1.0: usb_probe_interface
[ 98.493872] hub 4-0:1.0: usb_probe_interface - got id
[ 98.493873] hub 4-0:1.0: USB hub found
[ 98.493877] hub 4-0:1.0: 2 ports detected
[ 98.493879] hub 4-0:1.0: standalone hub
[ 98.493880] hub 4-0:1.0: no power switching (usb 1.0)
[ 98.493881] hub 4-0:1.0: individual port over-current protection
[ 98.493883] hub 4-0:1.0: power on to power good time: 2ms
[ 98.493886] hub 4-0:1.0: local power source is good
[ 98.493887] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 98.493929] drivers/usb/core/inode.c: creating file '001'
[ 98.494000] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 98.494005] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 98.494007] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 98.494036] drivers/usb/core/inode.c: creating file '005'
[ 98.494072] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 98.494078] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 98.494082] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 98.494083] uhci_hcd 0000:00:1a.2: Performing full reset
[ 98.494096] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 98.494099] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a400
[ 98.494121] usb usb5: default language 0x0409
[ 98.494126] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 98.494128] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 98.494130] usb usb5: Product: UHCI Host Controller
[ 98.494131] usb usb5: Manufacturer: Linux 2.6.30.4 uhci_hcd
[ 98.494133] usb usb5: SerialNumber: 0000:00:1a.2
[ 98.494160] usb usb5: uevent
[ 98.494182] usb usb5: usb_probe_device
[ 98.494184] usb usb5: configuration #1 chosen from 1 choice
[ 98.494189] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 98.494199] usb 5-0:1.0: uevent
[ 98.494221] hub 5-0:1.0: usb_probe_interface
[ 98.494223] hub 5-0:1.0: usb_probe_interface - got id
[ 98.494224] hub 5-0:1.0: USB hub found
[ 98.494228] hub 5-0:1.0: 2 ports detected
[ 98.494229] hub 5-0:1.0: standalone hub
[ 98.494231] hub 5-0:1.0: no power switching (usb 1.0)
[ 98.494232] hub 5-0:1.0: individual port over-current protection
[ 98.494233] hub 5-0:1.0: power on to power good time: 2ms
[ 98.494236] hub 5-0:1.0: local power source is good
[ 98.494238] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 98.494275] drivers/usb/core/inode.c: creating file '001'
[ 98.494343] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 98.494348] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 98.494351] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 98.494381] drivers/usb/core/inode.c: creating file '006'
[ 98.494420] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 98.494425] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 98.494429] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 98.494430] uhci_hcd 0000:00:1d.0: Performing full reset
[ 98.494443] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 98.494447] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
[ 98.494469] usb usb6: default language 0x0409
[ 98.494473] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 98.494475] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 98.494477] usb usb6: Product: UHCI Host Controller
[ 98.494479] usb usb6: Manufacturer: Linux 2.6.30.4 uhci_hcd
[ 98.494480] usb usb6: SerialNumber: 0000:00:1d.0
[ 98.494510] usb usb6: uevent
[ 98.494531] usb usb6: usb_probe_device
[ 98.494533] usb usb6: configuration #1 chosen from 1 choice
[ 98.494538] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 98.494549] usb 6-0:1.0: uevent
[ 98.494571] hub 6-0:1.0: usb_probe_interface
[ 98.494573] hub 6-0:1.0: usb_probe_interface - got id
[ 98.494574] hub 6-0:1.0: USB hub found
[ 98.494578] hub 6-0:1.0: 2 ports detected
[ 98.494579] hub 6-0:1.0: standalone hub
[ 98.494580] hub 6-0:1.0: no power switching (usb 1.0)
[ 98.494582] hub 6-0:1.0: individual port over-current protection
[ 98.494583] hub 6-0:1.0: power on to power good time: 2ms
[ 98.494586] hub 6-0:1.0: local power source is good
[ 98.494588] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 98.494627] drivers/usb/core/inode.c: creating file '001'
[ 98.494695] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 98.494700] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 98.494702] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 98.494731] drivers/usb/core/inode.c: creating file '007'
[ 98.494766] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 98.494772] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 98.494775] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 98.494777] uhci_hcd 0000:00:1d.1: Performing full reset
[ 98.494789] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 98.494796] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ac00
[ 98.494817] usb usb7: default language 0x0409
[ 98.494822] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 98.494824] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 98.494826] usb usb7: Product: UHCI Host Controller
[ 98.494827] usb usb7: Manufacturer: Linux 2.6.30.4 uhci_hcd
[ 98.494829] usb usb7: SerialNumber: 0000:00:1d.1
[ 98.494856] usb usb7: uevent
[ 98.494878] usb usb7: usb_probe_device
[ 98.494880] usb usb7: configuration #1 chosen from 1 choice
[ 98.494884] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 98.494897] usb 7-0:1.0: uevent
[ 98.494923] hub 7-0:1.0: usb_probe_interface
[ 98.494924] hub 7-0:1.0: usb_probe_interface - got id
[ 98.494926] hub 7-0:1.0: USB hub found
[ 98.494932] hub 7-0:1.0: 2 ports detected
[ 98.494933] hub 7-0:1.0: standalone hub
[ 98.494934] hub 7-0:1.0: no power switching (usb 1.0)
[ 98.494935] hub 7-0:1.0: individual port over-current protection
[ 98.494937] hub 7-0:1.0: power on to power good time: 2ms
[ 98.494940] hub 7-0:1.0: local power source is good
[ 98.494941] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 98.494982] drivers/usb/core/inode.c: creating file '001'
[ 98.495050] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 98.495055] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 98.495057] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 98.495093] drivers/usb/core/inode.c: creating file '008'
[ 98.495129] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 98.495135] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 98.495138] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 98.495140] uhci_hcd 0000:00:1d.2: Performing full reset
[ 98.495152] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 98.495156] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a880
[ 98.495180] usb usb8: default language 0x0409
[ 98.495185] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 98.495187] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 98.495189] usb usb8: Product: UHCI Host Controller
[ 98.495190] usb usb8: Manufacturer: Linux 2.6.30.4 uhci_hcd
[ 98.495192] usb usb8: SerialNumber: 0000:00:1d.2
[ 98.495222] usb usb8: uevent
[ 98.495243] usb usb8: usb_probe_device
[ 98.495245] usb usb8: configuration #1 chosen from 1 choice
[ 98.495250] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 98.495262] usb 8-0:1.0: uevent
[ 98.495284] hub 8-0:1.0: usb_probe_interface
[ 98.495286] hub 8-0:1.0: usb_probe_interface - got id
[ 98.495287] hub 8-0:1.0: USB hub found
[ 98.495291] hub 8-0:1.0: 2 ports detected
[ 98.495292] hub 8-0:1.0: standalone hub
[ 98.495293] hub 8-0:1.0: no power switching (usb 1.0)
[ 98.495295] hub 8-0:1.0: individual port over-current protection
[ 98.495296] hub 8-0:1.0: power on to power good time: 2ms
[ 98.495299] hub 8-0:1.0: local power source is good
[ 98.495300] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 98.495340] drivers/usb/core/inode.c: creating file '001'
[ 98.495446] usbcore: registered new interface driver usblp
[ 98.495449] Initializing USB Mass Storage driver...
[ 98.495495] usbcore: registered new interface driver usb-storage
[ 98.495497] USB Mass Storage support registered.
[ 98.495545] usbcore: registered new interface driver libusual
[ 98.495636] PNP: No PS/2 controller found. Probing ports directly.
[ 98.497673] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 98.497677] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 98.497720] mice: PS/2 mouse device common for all mice
[ 98.497865] rtc_cmos 00:03: RTC can wake from S4
[ 98.497906] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 98.497928] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 98.497977] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 98.498042] md: raid1 personality registered for level 1
[ 98.498147] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 98.498229] cpuidle: using governor ladder
[ 98.498230] cpuidle: using governor menu
[ 98.498800] usbcore: registered new interface driver hiddev
[ 98.498829] usbcore: registered new interface driver usbhid
[ 98.498831] usbhid: v2.6:USB HID core driver
[ 98.498857] Netfilter messages via NETLINK v0.30.
[ 98.498867] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 98.499043] ctnetlink v0.93: registering with nfnetlink.
[ 98.499488] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 98.499515] TCP cubic registered
[ 98.499516] Initializing XFRM netlink socket
[ 98.499670] NET: Registered protocol family 10
[ 98.500695] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 98.500742] IPv6 over IPv4 tunneling driver
[ 98.501235] NET: Registered protocol family 17
[ 98.505175] PM: Resume from disk failed.
[ 98.505183] registered taskstats version 1
[ 98.577762] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
[ 98.577766] hub 1-0:1.0: port 6: status 0501 change 0001
[ 98.592732] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 98.592738] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 98.592747] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 98.593727] uhci_hcd 0000:00:1a.2: port 2 portsc 008a,00
[ 98.593746] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 98.594726] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 98.594734] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 98.677560] hub 1-0:1.0: state 7 ports 6 chg 0040 evt 0000
[ 98.677568] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 98.728621] ehci_hcd 0000:00:1a.7: port 6 full speed --> companion
[ 98.728625] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
[ 98.728629] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 98.779367] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
[ 98.779384] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 98.779391] uhci_hcd 0000:00:1a.2: port 2 portsc 0093,00
[ 98.779397] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 98.883171] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[ 98.883910] sda1 sda2
[ 98.884070] sd 4:0:0:0: [sda] Attached SCSI disk
[ 98.893164] sdb1 sdb2
[ 98.893315] sd 4:0:1:0: [sdb] Attached SCSI disk
[ 98.909397] md: Waiting for all devices to be available before autodetect
[ 98.909400] md: If you don't use raid, use raid=noautodetect
[ 98.909505] md: Autodetecting RAID arrays.
[ 98.909736] md: Scanned 2 and added 2 devices.
[ 98.909738] md: autorun ...
[ 98.909739] md: considering sdb2 ...
[ 98.909744] md: adding sdb2 ...
[ 98.909748] md: adding sda2 ...
[ 98.909751] md: created md0
[ 98.909753] md: bind<sda2>
[ 98.909763] md: bind<sdb2>
[ 98.909771] md: running: <sdb2><sda2>
[ 98.909781] md: kicking non-fresh sdb2 from array!
[ 98.909785] md: unbind<sdb2>
[ 98.916103] md: export_rdev(sdb2)
[ 98.916207] raid1: raid set md0 active with 1 out of 2 mirrors
[ 98.916241] md: ... autorun DONE.
[ 98.916279] md0: unknown partition table
[ 98.968095] EXT4-fs: barriers enabled
[ 98.980525] kjournald2 starting: pid 927, dev md0:8, commit interval 5 seconds
[ 98.980530] EXT4-fs: delayed allocation enabled
[ 98.980532] EXT4-fs: file extents enabled
[ 98.984976] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 99.121464] EXT4-fs: mballoc enabled
[ 99.121475] EXT4-fs: mounted filesystem md0 with ordered data mode
[ 99.121482] VFS: Mounted root (ext4 filesystem) readonly on device 9:0.
[ 99.121499] Freeing unused kernel memory: 524k freed
[ 99.121574] Write protecting the kernel read-only data: 5552k
[ 99.127891] usb 5-2: skipped 1 descriptor after interface
[ 99.127894] usb 5-2: skipped 1 descriptor after interface
[ 99.132879] usb 5-2: default language 0x0409
[ 99.147855] usb 5-2: New USB device found, idVendor=046b, idProduct=ff10
[ 99.147859] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 99.147861] usb 5-2: Product: Virtual Keyboard and Mouse
[ 99.147864] usb 5-2: Manufacturer: American Megatrends Inc.
[ 99.147866] usb 5-2: SerialNumber: serial
[ 99.147918] usb 5-2: uevent
[ 99.149710] usb 5-2: usb_probe_device
[ 99.149713] usb 5-2: configuration #1 chosen from 1 choice
[ 99.182790] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
[ 99.185783] usb 5-2:1.0: uevent
[ 99.185834] usbhid 5-2:1.0: usb_probe_interface
[ 99.185836] usbhid 5-2:1.0: usb_probe_interface - got id
[ 99.192936] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input2
[ 99.192944] uhci_hcd 0000:00:1a.2: reserve dev 2 ep81-INT, period 1, phase 0, 17 us
[ 99.193017] generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-2/input0
[ 99.193062] usb 5-2: adding 5-2:1.1 (config #1, interface 1)
[ 99.205745] usb 5-2:1.1: uevent
[ 99.205793] usbhid 5-2:1.1: usb_probe_interface
[ 99.205795] usbhid 5-2:1.1: usb_probe_interface - got id
[ 99.209865] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input3
[ 99.209968] generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-2/input1
[ 99.210012] drivers/usb/core/inode.c: creating file '002'
[ 99.210056] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 99.210062] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 99.707173] usb usb3: uevent
[ 99.707194] usb 3-0:1.0: uevent
[ 99.707295] usb usb4: uevent
[ 99.707314] usb 4-0:1.0: uevent
[ 99.707410] usb usb5: uevent
[ 99.707424] usb 5-0:1.0: uevent
[ 99.707449] usb 5-2: uevent
[ 99.707462] usb 5-2:1.0: uevent
[ 99.707548] usb 5-2:1.1: uevent
[ 99.707683] usb usb1: uevent
[ 99.707701] usb 1-0:1.0: uevent
[ 99.707778] usb usb6: uevent
[ 99.707792] usb 6-0:1.0: uevent
[ 99.707885] usb usb7: uevent
[ 99.707904] usb 7-0:1.0: uevent
[ 99.708001] usb usb8: uevent
[ 99.708019] usb 8-0:1.0: uevent
[ 99.708113] usb usb2: uevent
[ 99.708132] usb 2-0:1.0: uevent
[ 99.739546] usb usb3: suspend_rh (auto-stop)
[ 99.739567] usb usb4: suspend_rh (auto-stop)
[ 99.739586] usb usb6: suspend_rh (auto-stop)
[ 99.739604] usb usb7: suspend_rh (auto-stop)
[ 99.739623] usb usb8: suspend_rh (auto-stop)
[ 99.746101] usb 5-2:1.1: uevent
[ 99.746134] usb 5-2:1.0: uevent
[ 99.746172] usb 5-2: uevent
[ 99.746201] usb 5-2: uevent
[ 99.746705] usb 5-2:1.1: uevent
[ 99.746805] usb 5-2: uevent
[ 100.527651] EXT4 FS on md0, internal journal on md0:8
[ 100.972295] hub 2-0:1.0: hub_suspend
[ 100.972303] usb usb2: bus auto-suspend
[ 100.972306] ehci_hcd 0000:00:1d.7: suspend root hub
[ 100.972328] hub 3-0:1.0: hub_suspend
[ 100.972331] usb usb3: bus auto-suspend
[ 100.972334] usb usb3: suspend_rh
[ 100.972355] hub 4-0:1.0: hub_suspend
[ 100.972357] usb usb4: bus auto-suspend
[ 100.972359] usb usb4: suspend_rh
[ 100.972372] hub 6-0:1.0: hub_suspend
[ 100.972374] usb usb6: bus auto-suspend
[ 100.972376] usb usb6: suspend_rh
[ 100.972388] hub 7-0:1.0: hub_suspend
[ 100.972391] usb usb7: bus auto-suspend
[ 100.972392] usb usb7: suspend_rh
[ 100.972405] hub 8-0:1.0: hub_suspend
[ 100.972407] usb usb8: bus auto-suspend
[ 100.972408] usb usb8: suspend_rh
[ 101.293072] loop: module loaded
[ 101.985289] hub 1-0:1.0: hub_suspend
[ 101.985297] usb usb1: bus auto-suspend
[ 101.985300] ehci_hcd 0000:00:1a.7: suspend root hub
[ 102.186946] ifup used greatest stack depth: 4208 bytes left
[ 102.925932] igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 102.926629] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 102.928012] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 113.633136] eth0: no IPv6 routers present
[ 1663.180526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3722.685859] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3724.024295] igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 3724.025611] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3734.660305] eth0: no IPv6 routers present
[ 4207.188281] md: bind<sdb2>
[ 4207.232812] RAID1 conf printout:
[ 4207.232815] --- wd:1 rd:2
[ 4207.232818] disk 0, wo:0, o:1, dev:sda2
[ 4207.232820] disk 1, wo:1, o:1, dev:sdb2
[ 4207.232857] md: recovery of RAID array md0
[ 4207.232859] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 4207.232861] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 4207.232865] md: using 128k window, over a total of 1953504704 blocks.
[41031.008718] md: md0: recovery done.
[41031.147571] RAID1 conf printout:
[41031.147573] --- wd:2 rd:2
[41031.147575] disk 0, wo:0, o:1, dev:sda2
[41031.147577] disk 1, wo:0, o:1, dev:sdb2
[403024.734049] sum used greatest stack depth: 4072 bytes left
[1328327.346684] tar used greatest stack depth: 4056 bytes left
[1367518.760440] pdflush used greatest stack depth: 3776 bytes left
[2256003.055451] end_request: I/O error, dev sdb, sector 3907028974
[2256003.055674] md: super_written gets error=-5, uptodate=0
[2256003.055677] raid1: Disk failure on sdb2, disabling device.
[2256003.055678] raid1: Operation continuing on 1 devices.
[2256003.437315] RAID1 conf printout:
[2256003.437318] --- wd:1 rd:2
[2256003.437321] disk 0, wo:0, o:1, dev:sda2
[2256003.437323] disk 1, wo:1, o:0, dev:sdb2
[2256003.440542] RAID1 conf printout:
[2256003.440545] --- wd:1 rd:2
[2256003.440548] disk 0, wo:0, o:1, dev:sda2
[2257068.333765] md: unbind<sdb2>
[2257068.340466] md: export_rdev(sdb2)
[2257099.392140] md: bind<sdb2>
[2257099.438375] RAID1 conf printout:
[2257099.438378] --- wd:1 rd:2
[2257099.438381] disk 0, wo:0, o:1, dev:sda2
[2257099.438383] disk 1, wo:1, o:1, dev:sdb2
[2257099.438462] md: recovery of RAID array md0
[2257099.438465] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[2257099.438466] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[2257099.438470] md: using 128k window, over a total of 1953504704 blocks.
[2289888.698717] md: md0: recovery done.
[2289888.827881] RAID1 conf printout:
[2289888.827884] --- wd:2 rd:2
[2289888.827887] disk 0, wo:0, o:1, dev:sda2
[2289888.827889] disk 1, wo:0, o:1, dev:sdb2
[2310401.950744] end_request: I/O error, dev sdb, sector 3907028974
[2310401.950966] md: super_written gets error=-5, uptodate=0
[2310401.950969] raid1: Disk failure on sdb2, disabling device.
[2310401.950970] raid1: Operation continuing on 1 devices.
[2310402.622529] RAID1 conf printout:
[2310402.622532] --- wd:1 rd:2
[2310402.622534] disk 0, wo:0, o:1, dev:sda2
[2310402.622537] disk 1, wo:1, o:0, dev:sdb2
[2310402.626394] RAID1 conf printout:
[2310402.626396] --- wd:1 rd:2
[2310402.626398] disk 0, wo:0, o:1, dev:sda2
[2317942.110788] md: unbind<sdb2>
[2317942.118014] md: export_rdev(sdb2)
[2317948.637723] md: bind<sdb2>
[2317948.685118] RAID1 conf printout:
[2317948.685121] --- wd:1 rd:2
[2317948.685124] disk 0, wo:0, o:1, dev:sda2
[2317948.685126] disk 1, wo:1, o:1, dev:sdb2
[2317948.685166] md: recovery of RAID array md0
[2317948.685168] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[2317948.685170] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[2317948.685174] md: using 128k window, over a total of 1953504704 blocks.
[2351418.039840] md: md0: recovery done.
[2351418.222173] RAID1 conf printout:
[2351418.222176] --- wd:2 rd:2
[2351418.222179] disk 0, wo:0, o:1, dev:sda2
[2351418.222182] disk 1, wo:0, o:1, dev:sdb2
[2378343.856005] end_request: I/O error, dev sdb, sector 3907028974
[2378343.856226] md: super_written gets error=-5, uptodate=0
[2378343.856228] raid1: Disk failure on sdb2, disabling device.
[2378343.856229] raid1: Operation continuing on 1 devices.
[2378343.877579] RAID1 conf printout:
[2378343.877583] --- wd:1 rd:2
[2378343.877587] disk 0, wo:0, o:1, dev:sda2
[2378343.877591] disk 1, wo:1, o:0, dev:sdb2
[2378343.881234] RAID1 conf printout:
[2378343.881237] --- wd:1 rd:2
[2378343.881240] disk 0, wo:0, o:1, dev:sda2
[2409799.504484] md: unbind<sdb2>
[2409799.511526] md: export_rdev(sdb2)
[2409803.613344] md: bind<sdb2>
[2409803.622694] RAID1 conf printout:
[2409803.622697] --- wd:1 rd:2
[2409803.622700] disk 0, wo:0, o:1, dev:sda2
[2409803.622702] disk 1, wo:1, o:1, dev:sdb2
[2409803.622741] md: recovery of RAID array md0
[2409803.622743] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[2409803.622745] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[2409803.622749] md: using 128k window, over a total of 1953504704 blocks.
[2446822.078048] md: md0: recovery done.
[2446822.162361] RAID1 conf printout:
[2446822.162364] --- wd:2 rd:2
[2446822.162368] disk 0, wo:0, o:1, dev:sda2
[2446822.162370] disk 1, wo:0, o:1, dev:sdb2
[2463699.282479] end_request: I/O error, dev sdb, sector 3907028974
[2463699.282699] md: super_written gets error=-5, uptodate=0
[2463699.282702] raid1: Disk failure on sdb2, disabling device.
[2463699.282703] raid1: Operation continuing on 1 devices.
[2463699.303186] RAID1 conf printout:
[2463699.303189] --- wd:1 rd:2
[2463699.303192] disk 0, wo:0, o:1, dev:sda2
[2463699.303194] disk 1, wo:1, o:0, dev:sdb2
[2463699.308035] RAID1 conf printout:
[2463699.308037] --- wd:1 rd:2
[2463699.308040] disk 0, wo:0, o:1, dev:sda2
[2499818.688121] md: unbind<sdb2>
[2499818.695024] md: export_rdev(sdb2)
[2499822.032436] md: bind<sdb2>
[2499822.041787] RAID1 conf printout:
[2499822.041790] --- wd:1 rd:2
[2499822.041793] disk 0, wo:0, o:1, dev:sda2
[2499822.041796] disk 1, wo:1, o:1, dev:sdb2
[2499822.041839] md: recovery of RAID array md0
[2499822.041841] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[2499822.041843] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[2499822.041847] md: using 128k window, over a total of 1953504704 blocks.
[2537148.835839] md: md0: recovery done.
[2537148.964996] RAID1 conf printout:
[2537148.964999] --- wd:2 rd:2
[2537148.965003] disk 0, wo:0, o:1, dev:sda2
[2537148.965005] disk 1, wo:0, o:1, dev:sdb2
[2545135.278733] end_request: I/O error, dev sdb, sector 3907028974
[2545135.278955] md: super_written gets error=-5, uptodate=0
[2545135.278958] raid1: Disk failure on sdb2, disabling device.
[2545135.278959] raid1: Operation continuing on 1 devices.
[2545135.761917] RAID1 conf printout:
[2545135.761920] --- wd:1 rd:2
[2545135.761923] disk 0, wo:0, o:1, dev:sda2
[2545135.761926] disk 1, wo:1, o:0, dev:sdb2
[2545135.766893] RAID1 conf printout:
[2545135.766896] --- wd:1 rd:2
[2545135.766899] disk 0, wo:0, o:1, dev:sda2
[2550667.169302] md: unbind<sdb2>
[2550667.177346] md: export_rdev(sdb2)
[2550667.568787] md: bind<sdb2>
[2550667.614961] RAID1 conf printout:
[2550667.614964] --- wd:1 rd:2
[2550667.614967] disk 0, wo:0, o:1, dev:sda2
[2550667.614969] disk 1, wo:1, o:1, dev:sdb2
[2550667.615008] md: recovery of RAID array md0
[2550667.615010] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[2550667.615012] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[2550667.615016] md: using 128k window, over a total of 1953504704 blocks.
[2586150.939539] md: md0: recovery done.
[2586151.142132] RAID1 conf printout:
[2586151.142135] --- wd:2 rd:2
[2586151.142139] disk 0, wo:0, o:1, dev:sda2
[2586151.142142] disk 1, wo:0, o:1, dev:sdb2
[2607474.299114] end_request: I/O error, dev sdb, sector 3907028974
[2607474.299337] md: super_written gets error=-5, uptodate=0
[2607474.299340] raid1: Disk failure on sdb2, disabling device.
[2607474.299341] raid1: Operation continuing on 1 devices.
[2607474.319610] RAID1 conf printout:
[2607474.319613] --- wd:1 rd:2
[2607474.319616] disk 0, wo:0, o:1, dev:sda2
[2607474.319619] disk 1, wo:1, o:0, dev:sdb2
[2607474.323530] RAID1 conf printout:
[2607474.323532] --- wd:1 rd:2
[2607474.323535] disk 0, wo:0, o:1, dev:sda2
[2622763.210681] md: unbind<sdb2>
[2622763.217011] md: export_rdev(sdb2)
[2622763.327343] md: bind<sdb2>
[2622763.375661] RAID1 conf printout:
[2622763.375664] --- wd:1 rd:2
[2622763.375667] disk 0, wo:0, o:1, dev:sda2
[2622763.375669] disk 1, wo:1, o:1, dev:sdb2
[2622763.375710] md: recovery of RAID array md0
[2622763.375712] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[2622763.375714] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[2622763.375718] md: using 128k window, over a total of 1953504704 blocks.
[2659664.938226] md: md0: recovery done.
[2659665.070862] RAID1 conf printout:
[2659665.070865] --- wd:2 rd:2
[2659665.070868] disk 0, wo:0, o:1, dev:sda2
[2659665.070870] disk 1, wo:0, o:1, dev:sdb2
[2973873.112757] md: data-check of RAID array md0
[2973873.112760] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[2973873.112762] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
[2973873.112766] md: using 128k window, over a total of 1953504704 blocks.
[3008265.577682] md: md0: data-check done.
[3058424.467530] end_request: I/O error, dev sdb, sector 3907028974
[3058424.467751] md: super_written gets error=-5, uptodate=0
[3058424.467755] raid1: Disk failure on sdb2, disabling device.
[3058424.467755] raid1: Operation continuing on 1 devices.
[3058424.488444] RAID1 conf printout:
[3058424.488447] --- wd:1 rd:2
[3058424.488450] disk 0, wo:0, o:1, dev:sda2
[3058424.488453] disk 1, wo:1, o:0, dev:sdb2
[3058424.491469] RAID1 conf printout:
[3058424.491471] --- wd:1 rd:2
[3058424.491473] disk 0, wo:0, o:1, dev:sda2
[3058529.271920] md: unbind<sdb2>
[3058529.282549] md: export_rdev(sdb2)
[3058529.308832] md: bind<sdb2>
[3058529.683992] RAID1 conf printout:
[3058529.683995] --- wd:1 rd:2
[3058529.683998] disk 0, wo:0, o:1, dev:sda2
[3058529.684000] disk 1, wo:1, o:1, dev:sdb2
[3058529.684039] md: recovery of RAID array md0
[3058529.684041] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[3058529.684043] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[3058529.684047] md: using 128k window, over a total of 1953504704 blocks.
[3095772.403073] md: md0: recovery done.
[3095772.513820] RAID1 conf printout:
[3095772.513823] --- wd:2 rd:2
[3095772.513826] disk 0, wo:0, o:1, dev:sda2
[3095772.513829] disk 1, wo:0, o:1, dev:sdb2
[3111078.923862] end_request: I/O error, dev sdb, sector 3907028974
[3111078.924084] md: super_written gets error=-5, uptodate=0
[3111078.924086] raid1: Disk failure on sdb2, disabling device.
[3111078.924087] raid1: Operation continuing on 1 devices.
[3111078.945144] RAID1 conf printout:
[3111078.945147] --- wd:1 rd:2
[3111078.945150] disk 0, wo:0, o:1, dev:sda2
[3111078.945152] disk 1, wo:1, o:0, dev:sdb2
[3111078.948893] RAID1 conf printout:
[3111078.948896] --- wd:1 rd:2
[3111078.948899] disk 0, wo:0, o:1, dev:sda2
[3114305.709565] md: unbind<sdb2>
[3114305.719957] md: export_rdev(sdb2)
[3114305.756401] md: bind<sdb2>
[3114305.807463] RAID1 conf printout:
[3114305.807466] --- wd:1 rd:2
[3114305.807469] disk 0, wo:0, o:1, dev:sda2
[3114305.807471] disk 1, wo:1, o:1, dev:sdb2
[3114305.807512] md: recovery of RAID array md0
[3114305.807515] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[3114305.807516] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[3114305.807520] md: using 128k window, over a total of 1953504704 blocks.
[3150207.473717] md: md0: recovery done.
[3150207.600595] RAID1 conf printout:
[3150207.600598] --- wd:2 rd:2
[3150207.600601] disk 0, wo:0, o:1, dev:sda2
[3150207.600604] disk 1, wo:0, o:1, dev:sdb2
[3161491.894551] end_request: I/O error, dev sdb, sector 3907028974
[3161491.894776] md: super_written gets error=-5, uptodate=0
[3161491.894779] raid1: Disk failure on sdb2, disabling device.
[3161491.894780] raid1: Operation continuing on 1 devices.
[3161492.276178] RAID1 conf printout:
[3161492.276181] --- wd:1 rd:2
[3161492.276184] disk 0, wo:0, o:1, dev:sda2
[3161492.276186] disk 1, wo:1, o:0, dev:sdb2
[3161492.279854] RAID1 conf printout:
[3161492.279856] --- wd:1 rd:2
[3161492.279859] disk 0, wo:0, o:1, dev:sda2
[3183730.823542] md: unbind<sdb2>
[3183730.834313] md: export_rdev(sdb2)
[3183731.279881] md: bind<sdb2>
[3183731.304704] RAID1 conf printout:
[3183731.304707] --- wd:1 rd:2
[3183731.304710] disk 0, wo:0, o:1, dev:sda2
[3183731.304712] disk 1, wo:1, o:1, dev:sdb2
[3183731.304752] md: recovery of RAID array md0
[3183731.304754] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[3183731.304756] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[3183731.304759] md: using 128k window, over a total of 1953504704 blocks.
[3218635.462393] md: md0: recovery done.
[3218635.591553] RAID1 conf printout:
[3218635.591557] --- wd:2 rd:2
[3218635.591560] disk 0, wo:0, o:1, dev:sda2
[3218635.591562] disk 1, wo:0, o:1, dev:sdb2
[3391005.325670] end_request: I/O error, dev sdb, sector 3907028974
[3391005.325890] md: super_written gets error=-5, uptodate=0
[3391005.325893] raid1: Disk failure on sdb2, disabling device.
[3391005.325894] raid1: Operation continuing on 1 devices.
[3391006.012141] RAID1 conf printout:
[3391006.012144] --- wd:1 rd:2
[3391006.012147] disk 0, wo:0, o:1, dev:sda2
[3391006.012149] disk 1, wo:1, o:0, dev:sdb2
[3391006.015266] RAID1 conf printout:
[3391006.015269] --- wd:1 rd:2
[3391006.015272] disk 0, wo:0, o:1, dev:sda2
[3410193.895569] md: unbind<sdb2>
[3410193.902505] md: export_rdev(sdb2)
[3410193.923767] md: bind<sdb2>
[3410193.970724] RAID1 conf printout:
[3410193.970727] --- wd:1 rd:2
[3410193.970730] disk 0, wo:0, o:1, dev:sda2
[3410193.970733] disk 1, wo:1, o:1, dev:sdb2
[3410193.970773] md: recovery of RAID array md0
[3410193.970775] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[3410193.970777] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[3410193.970781] md: using 128k window, over a total of 1953504704 blocks.
[3445254.592366] md: md0: recovery done.
[3445254.712358] RAID1 conf printout:
[3445254.712361] --- wd:2 rd:2
[3445254.712364] disk 0, wo:0, o:1, dev:sda2
[3445254.712367] disk 1, wo:0, o:1, dev:sdb2
[3880879.007618] end_request: I/O error, dev sda, sector 3907028974
[3880879.007839] md: super_written gets error=-5, uptodate=0
[3880879.007842] raid1: Disk failure on sda2, disabling device.
[3880879.007843] raid1: Operation continuing on 1 devices.
[3880879.028518] RAID1 conf printout:
[3880879.028521] --- wd:1 rd:2
[3880879.028524] disk 0, wo:1, o:0, dev:sda2
[3880879.028527] disk 1, wo:0, o:1, dev:sdb2
[3880879.031607] RAID1 conf printout:
[3880879.031610] --- wd:1 rd:2
[3880879.031613] disk 1, wo:0, o:1, dev:sdb2
[3885338.980679] md: cannot remove active disk sdb2 from md0 ...
[3885363.182774] md: unbind<sda2>
[3885363.189328] md: export_rdev(sda2)
[3885363.605459] md: bind<sda2>
[3885363.654632] RAID1 conf printout:
[3885363.654635] --- wd:1 rd:2
[3885363.654638] disk 0, wo:1, o:1, dev:sda2
[3885363.654641] disk 1, wo:0, o:1, dev:sdb2
[3885363.654681] md: recovery of RAID array md0
[3885363.654683] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[3885363.654685] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[3885363.654689] md: using 128k window, over a total of 1953504704 blocks.
[3921168.923151] md: md0: recovery done.
[3921169.040914] RAID1 conf printout:
[3921169.040917] --- wd:2 rd:2
[3921169.040920] disk 0, wo:0, o:1, dev:sda2
[3921169.040923] disk 1, wo:0, o:1, dev:sdb2
[3964586.721298] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
[3964586.721304] Descriptor sense data with sense descriptors (in hex):
[3964586.721307] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964586.721315] 00 00 00 00 00 00
[3964586.721320] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
[3964588.909481] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
[3964588.909487] Descriptor sense data with sense descriptors (in hex):
[3964588.909489] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964588.909498] 00 00 00 00 00 00
[3964588.909503] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
[3964616.782366] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
[3964616.782372] Descriptor sense data with sense descriptors (in hex):
[3964616.782375] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964616.782384] 00 00 00 00 00 00
[3964616.782388] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
[3964616.783355] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
[3964616.783359] Descriptor sense data with sense descriptors (in hex):
[3964616.783361] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964616.783366] 00 00 00 00 40 50
[3964616.783370] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
[3964616.786249] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
[3964616.786254] Descriptor sense data with sense descriptors (in hex):
[3964616.786256] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964616.786265] 00 00 00 00 40 50
[3964616.786269] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
[3964616.787231] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
[3964616.787235] Descriptor sense data with sense descriptors (in hex):
[3964616.787236] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964616.787242] 00 00 00 00 40 50
[3964616.787245] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
[3964616.792653] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
[3964616.792659] Descriptor sense data with sense descriptors (in hex):
[3964616.792661] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964616.792669] 00 00 00 00 00 00
[3964616.792674] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
[3964620.527486] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
[3964620.527492] Descriptor sense data with sense descriptors (in hex):
[3964620.527495] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964620.527503] 00 00 00 00 00 00
[3964620.527508] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
[3964620.528493] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
[3964620.528497] Descriptor sense data with sense descriptors (in hex):
[3964620.528498] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964620.528504] 00 00 00 00 40 50
[3964620.528508] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
[3964620.531094] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
[3964620.531099] Descriptor sense data with sense descriptors (in hex):
[3964620.531102] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964620.531110] 00 00 00 00 40 50
[3964620.531115] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
[3964620.532075] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
[3964620.532079] Descriptor sense data with sense descriptors (in hex):
[3964620.532080] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964620.532086] 00 00 00 00 40 50
[3964620.532090] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
[3964620.537480] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
[3964620.537485] Descriptor sense data with sense descriptors (in hex):
[3964620.537487] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[3964620.537495] 00 00 00 00 00 00
[3964620.537500] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
/Allan
--
Allan Wind
Life Integrity, LLC
<http://lifeintegrity.com>
next prev parent reply other threads:[~2009-09-18 2:47 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-26 0:32 MD/RAID: what's wrong with sector 1953519935? Andrei Tanas
2009-08-26 0:50 ` NeilBrown
2009-08-26 1:06 ` Ric Wheeler
2009-08-26 1:24 ` NeilBrown
2009-08-26 1:31 ` Ric Wheeler
2009-08-26 2:22 ` Andrei Tanas
2009-08-26 2:41 ` Ric Wheeler
2009-08-26 3:45 ` Andrei Tanas
2009-08-26 10:34 ` Ric Wheeler
2009-08-26 14:46 ` Andrei Tanas
2009-08-26 14:49 ` Andrei Tanas
2009-08-26 15:39 ` Ric Wheeler
2009-08-26 18:12 ` Andrei Tanas
2009-08-26 18:12 ` Andrei Tanas
2009-08-27 0:07 ` Mark Lord
2009-08-27 1:37 ` Andrei Tanas
2009-08-27 1:37 ` Andrei Tanas
2009-08-27 2:33 ` Robert Hancock
2009-08-27 21:22 ` MD/RAID time out writing superblock Andrei Tanas
2009-08-27 21:57 ` Ric Wheeler
2009-08-31 8:10 ` Tejun Heo
2009-08-31 12:04 ` Ric Wheeler
2009-08-31 12:20 ` Tejun Heo
2009-09-07 11:44 ` Chris Webb
2009-09-07 11:59 ` Chris Webb
2009-09-09 12:02 ` Chris Webb
2009-09-14 7:41 ` Tejun Heo
2009-09-14 7:44 ` Tejun Heo
2009-09-14 12:48 ` Mark Lord
2009-09-14 13:05 ` Tejun Heo
2009-09-14 14:25 ` Mark Lord
2009-09-16 23:19 ` Chris Webb
2009-09-17 13:29 ` Mark Lord
2009-09-17 13:32 ` Mark Lord
2009-09-17 13:37 ` Chris Webb
2009-09-17 15:35 ` Tejun Heo
2009-09-17 16:16 ` Mark Lord
2009-09-17 16:17 ` Mark Lord
2009-09-18 17:05 ` Chris Webb
2009-09-20 17:35 ` Allan Wind
2009-09-28 5:32 ` Allan Wind
2009-09-21 10:26 ` Chris Webb
2009-09-21 19:47 ` Mark Lord
2009-09-22 6:16 ` Robert Hancock
2009-09-20 18:36 ` Robert Hancock
2009-09-14 13:11 ` Henrique de Moraes Holschuh
2009-09-14 13:24 ` Tejun Heo
2009-09-14 14:02 ` Henrique de Moraes Holschuh
2009-09-14 14:34 ` Tejun Heo
2009-09-14 13:14 ` Gabor Gombas
2009-09-07 16:55 ` Allan Wind
2009-09-07 23:26 ` Thomas Fjellstrom
2009-09-07 23:26 ` Thomas Fjellstrom
2009-09-14 7:46 ` Tejun Heo
2009-09-14 21:13 ` Thomas Fjellstrom
2009-09-14 22:23 ` Tejun Heo
2009-09-07 16:55 ` Allan Wind
2009-09-16 22:28 ` Chris Webb
2009-09-16 23:47 ` Tejun Heo
2009-09-17 0:34 ` Neil Brown
2009-09-17 12:00 ` Chris Webb
2009-09-17 11:57 ` Chris Webb
2009-09-17 15:44 ` Tejun Heo
2009-09-17 16:36 ` Allan Wind
2009-09-18 0:16 ` Tejun Heo
2009-09-18 2:47 ` Allan Wind [this message]
2009-09-18 17:07 ` Chris Webb
2009-09-20 18:46 ` Robert Hancock
2009-09-21 0:02 ` Kyle Moffett
2009-09-17 13:35 ` Mark Lord
2009-09-17 15:47 ` Tejun Heo
2009-08-31 12:21 ` Mark Lord
2009-08-31 23:45 ` Mark Lord
2009-09-01 13:07 ` Andrei Tanas
2009-09-01 13:07 ` Andrei Tanas
2009-09-01 13:15 ` Mark Lord
2009-09-01 13:30 ` Tejun Heo
2009-09-01 13:47 ` Ric Wheeler
2009-09-01 14:18 ` Andrei Tanas
2009-09-01 14:18 ` Andrei Tanas
2009-09-14 5:30 ` Marc Giger
2009-09-14 5:30 ` Marc Giger
2009-09-02 21:58 ` Allan Wind
2009-09-04 19:39 ` Andrei Tanas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090918024758.GC5156@lifeintegrity.com \
--to=allan_wind@lifeintegrity.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.