From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: netdev@vger.kernel.org
Cc: gospo@redhat.com, Greg Rose <gregory.v.rose@intel.com>,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [RFC PATCH 05/12] ixgbe: Add SR-IOV features to main module
Date: Tue, 08 Dec 2009 14:14:36 -0800 [thread overview]
Message-ID: <20091208221435.28373.76070.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091208221258.28373.16663.stgit@localhost.localdomain>
From: Greg Rose <gregory.v.rose@intel.com>
Adds SR-IOV features supported by the 82599 controller to the main driver
module. If the CONFIG_PCI_IOV kernel option is selected then the SR-IOV
features are enabled. Use the max_vfs module option to allocate up to 63
virtual functions per physical port.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_main.c | 270 ++++++++++++++++++++++++++++++++++++++--
1 files changed, 259 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 35ea8c9..0bde380 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -45,6 +45,7 @@
#include "ixgbe.h"
#include "ixgbe_common.h"
#include "ixgbe_dcb_82599.h"
+#include "ixgbe_sriov.h"
char ixgbe_driver_name[] = "ixgbe";
static const char ixgbe_driver_string[] =
@@ -124,6 +125,13 @@ static struct notifier_block dca_notifier = {
};
#endif
+#ifdef CONFIG_PCI_IOV
+static unsigned int max_vfs;
+module_param(max_vfs, uint, 0);
+MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate "
+ "per physical function");
+#endif /* CONFIG_PCI_IOV */
+
MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver");
MODULE_LICENSE("GPL");
@@ -131,6 +139,42 @@ MODULE_VERSION(DRV_VERSION);
#define DEFAULT_DEBUG_LEVEL_SHIFT 3
+static inline void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 gcr;
+ u32 gpie;
+ u32 vmdctl;
+
+#ifdef CONFIG_PCI_IOV
+ /* disable iov and allow time for transactions to clear */
+ pci_disable_sriov(adapter->pdev);
+#endif
+ msleep(500);
+
+ /* turn off device IOV mode */
+ gcr = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
+ gcr &= ~(0x80000003);
+ IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr);
+ gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
+ gpie &= ~IXGBE_GPIE_VTMODE_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
+
+ /* set default pool back to 0 */
+ vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+ vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
+
+ /* take a breather then clean up driver data */
+ msleep(100);
+ if (adapter->vfinfo)
+ kfree(adapter->vfinfo);
+ adapter->vfinfo = NULL;
+
+ adapter->num_vfs = 0;
+ adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
+}
+
static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter)
{
u32 ctrl_ext;
@@ -1020,7 +1064,12 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
/* set up to autoclear timer, and the vectors */
mask = IXGBE_EIMS_ENABLE_MASK;
- mask &= ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC);
+ if (adapter->num_vfs)
+ mask &= ~(IXGBE_EIMS_OTHER |
+ IXGBE_EIMS_MAILBOX |
+ IXGBE_EIMS_LSC);
+ else
+ mask &= ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask);
}
@@ -1249,6 +1298,9 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
if (eicr & IXGBE_EICR_LSC)
ixgbe_check_lsc(adapter);
+ if (eicr & IXGBE_EICR_MAILBOX)
+ ixgbe_msg_task(adapter);
+
if (hw->mac.type == ixgbe_mac_82598EB)
ixgbe_check_fan_failure(adapter, eicr);
@@ -1763,6 +1815,8 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
mask |= IXGBE_EIMS_ECC;
mask |= IXGBE_EIMS_GPI_SDP1;
mask |= IXGBE_EIMS_GPI_SDP2;
+ if (adapter->num_vfs)
+ mask |= IXGBE_EIMS_MAILBOX;
}
if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
@@ -1771,6 +1825,11 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
ixgbe_irq_enable_queues(adapter, ~0);
IXGBE_WRITE_FLUSH(&adapter->hw);
+
+ if (adapter->num_vfs > 32) {
+ u32 eitrsel = (1 << (adapter->num_vfs - 32)) - 1;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, eitrsel);
+ }
}
/**
@@ -1900,6 +1959,8 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
+ if (adapter->num_vfs > 32)
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0);
}
IXGBE_WRITE_FLUSH(&adapter->hw);
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
@@ -1984,18 +2045,32 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
if (hw->mac.type == ixgbe_mac_82599EB) {
u32 rttdcs;
+ u32 mask;
/* disable the arbiter while setting MTQC */
rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
rttdcs |= IXGBE_RTTDCS_ARBDIS;
IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
- /* We enable 8 traffic classes, DCB only */
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
- IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA |
- IXGBE_MTQC_8TC_8TQ));
- else
+ /* set transmit pool layout */
+ mask = (IXGBE_FLAG_SRIOV_ENABLED | IXGBE_FLAG_DCB_ENABLED);
+ switch (adapter->flags & mask) {
+
+ case (IXGBE_FLAG_SRIOV_ENABLED):
+ IXGBE_WRITE_REG(hw, IXGBE_MTQC,
+ (IXGBE_MTQC_VT_ENA | IXGBE_MTQC_64VF));
+ break;
+
+ case (IXGBE_FLAG_DCB_ENABLED):
+ /* We enable 8 traffic classes, DCB only */
+ IXGBE_WRITE_REG(hw, IXGBE_MTQC,
+ (IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ));
+ break;
+
+ default:
IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB);
+ break;
+ }
/* re-eable the arbiter */
rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
@@ -2054,12 +2129,16 @@ static u32 ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
#ifdef CONFIG_IXGBE_DCB
| IXGBE_FLAG_DCB_ENABLED
#endif
+ | IXGBE_FLAG_SRIOV_ENABLED
);
switch (mask) {
case (IXGBE_FLAG_RSS_ENABLED):
mrqc = IXGBE_MRQC_RSSEN;
break;
+ case (IXGBE_FLAG_SRIOV_ENABLED):
+ mrqc = IXGBE_MRQC_VMDQEN;
+ break;
#ifdef CONFIG_IXGBE_DCB
case (IXGBE_FLAG_DCB_ENABLED):
mrqc = IXGBE_MRQC_RT8TCEN;
@@ -2140,7 +2219,9 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
int rx_buf_len;
/* Decide whether to use packet split mode or not */
- adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+ /* Do not use packet split if we're in SR-IOV Mode */
+ if (!adapter->num_vfs)
+ adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
/* Set the RX buffer length according to the mode */
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
@@ -2152,7 +2233,9 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
IXGBE_PSRTYPE_IPV4HDR |
IXGBE_PSRTYPE_IPV6HDR |
IXGBE_PSRTYPE_L2HDR;
- IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
+ IXGBE_WRITE_REG(hw,
+ IXGBE_PSRTYPE(adapter->num_vfs),
+ psrtype);
}
} else {
if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
@@ -2238,6 +2321,30 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
}
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ u32 vt_reg_bits;
+ u32 reg_offset, vf_shift;
+ u32 vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+ vt_reg_bits = IXGBE_VMD_CTL_VMDQ_EN
+ | IXGBE_VT_CTL_REPLEN;
+ vt_reg_bits |= (adapter->num_vfs <<
+ IXGBE_VT_CTL_POOL_SHIFT);
+ IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl | vt_reg_bits);
+ IXGBE_WRITE_REG(hw, IXGBE_MRQC, 0);
+
+ vf_shift = adapter->num_vfs % 32;
+ reg_offset = adapter->num_vfs / 32;
+ IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
+ /* Enable only the PF's pool for Tx/Rx */
+ IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (1 << vf_shift));
+ IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), (1 << vf_shift));
+ IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
+ ixgbe_set_vmolr(hw, adapter->num_vfs);
+ }
+
/* Program MRQC for the distribution of queues */
mrqc = ixgbe_setup_mrqc(adapter);
@@ -2269,6 +2376,20 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
}
IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
+ if (adapter->num_vfs) {
+ u32 reg;
+
+ /* Map PF MAC address in RAR Entry 0 to first pool
+ * following VFs */
+ hw->mac.ops.set_vmdq(hw, 0, adapter->num_vfs);
+
+ /* Set up VF register offsets for selected VT Mode, i.e.
+ * 64 VFs for SR-IOV */
+ reg = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
+ reg |= 0x80000003;
+ IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, reg);
+ }
+
rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED ||
@@ -2409,7 +2530,7 @@ static u8 *ixgbe_addr_list_itr(struct ixgbe_hw *hw, u8 **mc_addr_ptr, u32 *vmdq)
* responsible for configuring the hardware for proper unicast, multicast and
* promiscuous mode.
**/
-static void ixgbe_set_rx_mode(struct net_device *netdev)
+void ixgbe_set_rx_mode(struct net_device *netdev)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
@@ -2449,6 +2570,8 @@ static void ixgbe_set_rx_mode(struct net_device *netdev)
addr_list = netdev->mc_list->dmi_addr;
hw->mac.ops.update_mc_addr_list(hw, addr_list, addr_count,
ixgbe_addr_list_itr);
+ if (adapter->num_vfs)
+ ixgbe_restore_vf_multicasts(adapter);
}
static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
@@ -2709,6 +2832,10 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
/* MSI only */
gpie = 0;
}
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ gpie &= ~IXGBE_GPIE_VTMODE_MASK;
+ gpie |= IXGBE_GPIE_VTMODE_64;
+ }
/* XXX: to interrupt immediately for EICS writes, enable this */
/* gpie |= IXGBE_GPIE_EIMEN; */
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
@@ -2783,6 +2910,18 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
txdctl |= IXGBE_TXDCTL_ENABLE;
IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl);
+ if (hw->mac.type == ixgbe_mac_82599EB) {
+ int wait_loop = 10;
+ /* poll for Tx Enable ready */
+ do {
+ msleep(1);
+ txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
+ } while (--wait_loop &&
+ !(txdctl & IXGBE_TXDCTL_ENABLE));
+ if (!wait_loop)
+ DPRINTK(DRV, ERR, "Could not enable "
+ "Tx Queue %d\n", j);
+ }
}
for (i = 0; i < num_rx_rings; i++) {
@@ -2918,7 +3057,8 @@ void ixgbe_reset(struct ixgbe_adapter *adapter)
}
/* reprogram the RAR[0] in case user changed it. */
- hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs,
+ IXGBE_RAH_AV);
}
/**
@@ -3286,6 +3426,19 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
}
#endif /* IXGBE_FCOE */
+/**
+ * ixgbe_set_sriov_queues: Allocate queues for IOV use
+ * @adapter: board private structure to initialize
+ *
+ * IOV doesn't actually use anything, so just NAK the
+ * request for now and let the other queue routines
+ * figure out what to do.
+ */
+static inline bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter)
+{
+ return false;
+}
+
/*
* ixgbe_set_num_queues: Allocate queues for device, feature dependant
* @adapter: board private structure to initialize
@@ -3299,6 +3452,15 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
**/
static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
{
+ /* Start with base case */
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_pools = adapter->num_rx_queues;
+ adapter->num_rx_queues_per_pool = 1;
+
+ if (ixgbe_set_sriov_queues(adapter))
+ return;
+
#ifdef IXGBE_FCOE
if (ixgbe_set_fcoe_queues(adapter))
goto done;
@@ -3570,6 +3732,24 @@ static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
#endif /* IXGBE_FCOE */
/**
+ * ixgbe_cache_ring_sriov - Descriptor ring to register mapping for sriov
+ * @adapter: board private structure to initialize
+ *
+ * SR-IOV doesn't use any descriptor rings but changes the default if
+ * no other mapping is used.
+ *
+ */
+static inline bool ixgbe_cache_ring_sriov(struct ixgbe_adapter *adapter)
+{
+ adapter->rx_ring[0].reg_idx = adapter->num_vfs * 2;
+ adapter->tx_ring[0].reg_idx = adapter->num_vfs * 2;
+ if (adapter->num_vfs)
+ return true;
+ else
+ return false;
+}
+
+/**
* ixgbe_cache_ring_register - Descriptor ring to register mapping
* @adapter: board private structure to initialize
*
@@ -3586,6 +3766,9 @@ static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
adapter->rx_ring[0].reg_idx = 0;
adapter->tx_ring[0].reg_idx = 0;
+ if (ixgbe_cache_ring_sriov(adapter))
+ return;
+
#ifdef IXGBE_FCOE
if (ixgbe_cache_ring_fcoe(adapter))
return;
@@ -3695,6 +3878,9 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
adapter->atr_sample_rate = 0;
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+ ixgbe_disable_sriov(adapter);
+
ixgbe_set_num_queues(adapter);
err = pci_enable_msi(adapter->pdev);
@@ -5460,7 +5646,8 @@ static int ixgbe_set_mac(struct net_device *netdev, void *p)
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
- hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs,
+ IXGBE_RAH_AV);
return 0;
}
@@ -5767,6 +5954,52 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
goto err_sw_init;
}
+#ifdef CONFIG_PCI_IOV
+ if (hw->mac.type == ixgbe_mac_82599EB) {
+ /* The 82599 supports up to 64 VFs per physical function
+ * but this implementation limits allocation to 63 so that
+ * basic networking resources are still available to the
+ * physical function
+ */
+ adapter->num_vfs = (max_vfs > 63) ? 63 : max_vfs;
+ if (adapter->num_vfs) {
+ adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
+ err = pci_enable_sriov(pdev, adapter->num_vfs);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Failed to enable PCI sriov: %d\n",
+ err);
+ adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
+ adapter->num_vfs = 0;
+ }
+ }
+ /* If call to enable VFs succeeded then allocate memory
+ * for per VF control structures.
+ */
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ adapter->vfinfo =
+ kcalloc(adapter->num_vfs,
+ sizeof(struct vf_data_storage),
+ GFP_KERNEL);
+ if (!adapter->vfinfo) {
+ /* Oh oh */
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for VF "
+ "Data Storage - SRIOV disabled\n");
+ adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
+ adapter->num_vfs = 0;
+ } else {
+ /* Now that we're sure SR-IOV is enabled
+ * set up the mailbox parameters
+ */
+ ixgbe_init_mbx_params_pf(hw);
+ memcpy(&hw->mbx.ops, ii->mbx_ops,
+ sizeof(hw->mbx.ops));
+ }
+ }
+ }
+
+#endif /* CONFIG_PCI_IOV */
netdev->features = NETIF_F_SG |
NETIF_F_IP_CSUM |
NETIF_F_HW_VLAN_TX |
@@ -5787,6 +6020,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
netdev->vlan_features |= NETIF_F_IPV6_CSUM;
netdev->vlan_features |= NETIF_F_SG;
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+ adapter->flags &= ~(IXGBE_FLAG_RSS_ENABLED |
+ IXGBE_FLAG_DCB_ENABLED);
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
@@ -5913,6 +6149,13 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
ixgbe_setup_dca(adapter);
}
#endif
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ DPRINTK(PROBE, INFO, "IOV is enabled with %d VFs\n",
+ adapter->num_vfs);
+ for (i = 0; i < adapter->num_vfs; i++)
+ ixgbe_vf_configuration(pdev, (i | 0x10000000));
+ }
+
/* add san mac addr to netdev */
ixgbe_add_sanmac_netdev(netdev);
@@ -5925,6 +6168,8 @@ err_register:
ixgbe_clear_interrupt_scheme(adapter);
err_sw_init:
err_eeprom:
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+ ixgbe_disable_sriov(adapter);
clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
del_timer_sync(&adapter->sfp_timer);
cancel_work_sync(&adapter->sfp_task);
@@ -5993,6 +6238,9 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
if (netdev->reg_state == NETREG_REGISTERED)
unregister_netdev(netdev);
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+ ixgbe_disable_sriov(adapter);
+
ixgbe_clear_interrupt_scheme(adapter);
ixgbe_release_hw_control(adapter);
next prev parent reply other threads:[~2009-12-08 22:14 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-08 22:13 [RFC PATCH 01/12] ixgbe: Mailbox header and code module Jeff Kirsher
2009-12-08 22:13 ` [RFC PATCH 02/12] ixgbe: Add SR-IOV specific features Jeff Kirsher
2009-12-08 22:13 ` [RFC PATCH 03/12] ixgbe: Add SR-IOV register, structure and bit defines Jeff Kirsher
2009-12-10 0:06 ` Simon Horman
2009-12-08 22:14 ` [RFC PATCH 04/12] ixgbe: Add SR-IOV feature enablement code Jeff Kirsher
2009-12-08 22:14 ` Jeff Kirsher [this message]
2009-12-10 0:45 ` [RFC PATCH 05/12] ixgbe: Add SR-IOV features to main module Simon Horman
2009-12-10 0:49 ` Rose, Gregory V
2009-12-10 1:04 ` Simon Horman
2009-12-08 22:14 ` [RFC PATCH 06/12] ixgbe: Add SR-IOV specific modules to driver Makefile Jeff Kirsher
2009-12-10 0:17 ` Simon Horman
2009-12-08 22:15 ` [RFC PATCH 07/12] ixgbevf: Macros, data structures, useful defines and registers Jeff Kirsher
2009-12-08 22:15 ` [RFC PATCH 08/12] ixgbevf: 82599 Virtual Function core functions and header Jeff Kirsher
2009-12-08 22:15 ` [RFC PATCH 09/12] ixgbevf: Mailbox communication Jeff Kirsher
2009-12-08 22:16 ` [RFC PATCH 10/12] ixgbevf: Driver main and ethool interface module and main header Jeff Kirsher
2009-12-09 17:57 ` Ben Hutchings
2009-12-09 18:02 ` Rose, Gregory V
2009-12-08 22:16 ` [RFC PATCH 11/12] ixgbevf: Driver Makefile Jeff Kirsher
2009-12-08 22:16 ` [RFC PATCH 12/12] ixgbevf: Kconfig, Makefile and Documentation Jeff Kirsher
2009-12-08 22:41 ` Randy Dunlap
2009-12-08 22:49 ` Rose, Gregory V
2009-12-10 0:59 ` Simon Horman
2009-12-10 1:04 ` Rose, Gregory V
2009-12-10 0:50 ` [RFC PATCH 01/12] ixgbe: Mailbox header and code module Simon Horman
2009-12-10 0:53 ` Rose, Gregory V
-- strict thread matches above, loose matches on Subject: below --
2009-12-10 1:15 [RFC PATCH 05/12] ixgbe: Add SR-IOV features to main module chavey
2009-12-10 1:40 ` Rose, Gregory V
2009-12-10 1:44 ` Waskiewicz Jr, Peter P
2009-12-10 1:53 ` Rose, Gregory V
2009-12-10 19:57 ` Roland Dreier
2009-12-10 20:02 ` Rose, Gregory V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091208221435.28373.76070.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=gospo@redhat.com \
--cc=gregory.v.rose@intel.com \
--cc=netdev@vger.kernel.org \
--cc=peter.p.waskiewicz.jr@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.