From: Carsten Emde <C.Emde@osadl.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Jean Delvare <khali@linux-fr.org>,
Huaxu Wan <huaxu.wan@intel.com>, Carsten Emde <C.Emde@osadl.org>,
LM Sensors <lm-sensors@lm-sensors.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Intel
Date: Mon, 17 May 2010 09:41:36 +0000 [thread overview]
Message-ID: <20100517094136.094800562@osadl.org> (raw)
In-Reply-To: 20100514065808.GA11598@owl
Hi!
Here comes the current version of the coretemp patches. Huaxu did the initial
work; Jean suggested to submit them directly to Andrew.
I made some style changes as advised by checkpatch.
The patches have been tested successfully on Core 2 Duo and Quad, and on
Nehalem and Nehalem/Westmere where temperature readings were plausible and
changed with load as expected. When tested on an Atom processor (N270), the
temperature values were identical to previous versions of the coretemp
module and also changed with load. However, the readings should be higher
by 10 to 15C as compared to the outside temperature of the processor. Huaxu,
could you check? I would guess TjMax to be 105 instead of 90C in these
processors.
Carsten.
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Carsten Emde <C.Emde@osadl.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Jean Delvare <khali@linux-fr.org>,
Huaxu Wan <huaxu.wan@intel.com>, Carsten Emde <C.Emde@osadl.org>,
LM Sensors <lm-sensors@lm-sensors.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 0/2] hwmon: Update coretemp to current Intel processors
Date: Mon, 17 May 2010 11:41:36 +0200 [thread overview]
Message-ID: <20100517094136.094800562@osadl.org> (raw)
In-Reply-To: 20100514065808.GA11598@owl
Hi!
Here comes the current version of the coretemp patches. Huaxu did the initial
work; Jean suggested to submit them directly to Andrew.
I made some style changes as advised by checkpatch.
The patches have been tested successfully on Core 2 Duo and Quad, and on
Nehalem and Nehalem/Westmere where temperature readings were plausible and
changed with load as expected. When tested on an Atom processor (N270), the
temperature values were identical to previous versions of the coretemp
module and also changed with load. However, the readings should be higher
by 10 to 15C as compared to the outside temperature of the processor. Huaxu,
could you check? I would guess TjMax to be 105 instead of 90C in these
processors.
Carsten.
next prev parent reply other threads:[~2010-05-17 9:41 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-05 15:28 [lm-sensors] [PATCH 1/2] hwmon: (coretemp) Detect the thermal Huaxu Wan
2010-05-07 9:54 ` Huaxu Wan
2010-05-07 9:54 ` [PATCH 1/2] hwmon: (coretemp) Detect the thermal sensors by CPUID Huaxu Wan
2010-05-07 12:43 ` [lm-sensors] [PATCH 1/2] hwmon: (coretemp) Detect the thermal Jean Delvare
2010-05-07 12:43 ` [PATCH 1/2] hwmon: (coretemp) Detect the thermal sensors by CPUID Jean Delvare
2010-05-07 13:21 ` [lm-sensors] [PATCH 1/2] hwmon: (coretemp) Detect the thermal Carsten Emde
2010-05-07 13:21 ` [lm-sensors] [PATCH 1/2] hwmon: (coretemp) Detect the thermal sensors by CPUID Carsten Emde
2010-05-10 2:35 ` [lm-sensors] [PATCH 1/2] hwmon: (coretemp) Detect the thermal Huaxu Wan
2010-05-10 2:35 ` [lm-sensors] [PATCH 1/2] hwmon: (coretemp) Detect the thermal sensors by CPUID Huaxu Wan
2010-05-10 3:35 ` [lm-sensors] [PATCH 1/2 V2] hwmon: (coretemp) Detect the thermal Huaxu Wan
2010-05-10 3:35 ` [PATCH 1/2 V2] hwmon: (coretemp) Detect the thermal sensors by CPUID Huaxu Wan
2010-05-10 12:45 ` [lm-sensors] [PATCH 1/2 V2] hwmon: (coretemp) Detect the Valdis.Kletnieks
2010-05-10 12:45 ` [PATCH 1/2 V2] hwmon: (coretemp) Detect the thermal sensors by CPUID Valdis.Kletnieks
2010-05-11 3:41 ` [lm-sensors] [PATCH 1/2 V2] hwmon: (coretemp) Detect the Huaxu Wan
2010-05-11 3:41 ` [PATCH 1/2 V2] hwmon: (coretemp) Detect the thermal sensors by CPUID Huaxu Wan
2010-05-11 7:55 ` [lm-sensors] [PATCH 1/2 V3] hwmon: (coretemp) Detect the thermal Huaxu Wan
2010-05-11 8:01 ` [PATCH 1/2 V3] hwmon: (coretemp) Detect the thermal sensors by CPUID Huaxu Wan
2010-05-11 21:45 ` [lm-sensors] [PATCH 1/2 V3] hwmon: (coretemp) Detect the Valdis.Kletnieks
2010-05-11 21:45 ` [PATCH 1/2 V3] hwmon: (coretemp) Detect the thermal sensors by CPUID Valdis.Kletnieks
2010-05-14 3:20 ` [lm-sensors] [PATCH 1/2 V3] hwmon: (coretemp) Detect the Henrique de Moraes Holschuh
2010-05-14 3:20 ` [lm-sensors] [PATCH 1/2 V3] hwmon: (coretemp) Detect the thermal sensors by CPUID Henrique de Moraes Holschuh
2010-05-14 6:58 ` [lm-sensors] [PATCH 1/2 V3 minor change] hwmon: (coretemp) Detect Huaxu Wan
2010-05-14 6:58 ` [PATCH 1/2 V3 minor change] hwmon: (coretemp) Detect the thermal sensors by CPUID Huaxu Wan
2010-05-17 9:41 ` Carsten Emde [this message]
2010-05-17 9:41 ` [PATCH 0/2] hwmon: Update coretemp to current Intel processors Carsten Emde
2010-05-17 9:41 ` [lm-sensors] [PATCH 1/2] Detect the thermal sensors by CPUID Carsten Emde
2010-05-17 9:41 ` Carsten Emde
2010-05-17 9:41 ` [lm-sensors] [PATCH 2/2] Get TjMax value from MSR Carsten Emde
2010-05-17 9:41 ` Carsten Emde
2010-05-18 4:47 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Dmitry Gromov
2010-05-18 7:01 ` Carsten Emde
2010-05-18 7:01 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Intel processors Carsten Emde
2010-05-18 12:03 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Dmitry Gromov
2010-05-18 12:03 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Intel processors Dmitry Gromov
2010-05-19 1:27 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Huaxu Wan
2010-05-19 1:27 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Intel processors Huaxu Wan
2010-05-18 5:07 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Wan, Huaxu
2010-05-18 6:45 ` Dmitry Gromov
2010-05-18 7:13 ` Carsten Emde
2010-05-18 7:13 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Intel processors Carsten Emde
2010-05-19 0:50 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Huaxu Wan
2010-05-19 0:50 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Intel processors Huaxu Wan
2010-05-19 3:12 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Dmitry Gromov
2010-05-19 3:12 ` [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Intel processors Dmitry Gromov
-- strict thread matches above, loose matches on Subject: below --
2010-03-05 15:38 [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Huaxu Wan
2010-03-05 16:19 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Luca Tettamanti
2010-03-08 14:44 ` Huaxu Wan
2010-05-07 9:59 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Huaxu Wan
2010-05-07 9:59 ` Huaxu Wan
2010-05-07 13:29 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Carsten Emde
2010-05-07 13:29 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Carsten Emde
2010-05-10 3:09 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Huaxu Wan
2010-05-10 3:09 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Huaxu Wan
2010-05-10 3:50 ` [lm-sensors] [PATCH 2/2 V2] hwmon: (coretemp) Get TjMax value from Huaxu Wan
2010-05-10 3:50 ` [PATCH 2/2 V2] hwmon: (coretemp) Get TjMax value from MSR Huaxu Wan
2010-05-29 5:39 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Maxim Levitsky
2010-05-29 5:39 ` [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Maxim Levitsky
2010-05-30 14:43 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Maxim Levitsky
2010-05-30 14:43 ` [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Maxim Levitsky
2010-05-31 1:39 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Huaxu Wan
2010-05-31 1:39 ` [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Huaxu Wan
2010-06-02 16:34 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Maxim Levitsky
2010-06-02 16:34 ` [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Maxim Levitsky
2010-06-02 20:10 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Maxim Levitsky
2010-06-02 20:10 ` [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Maxim Levitsky
2010-06-12 13:03 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Maxim Levitsky
2010-06-12 13:03 ` [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Maxim Levitsky
2010-06-13 2:27 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Wan, Huaxu
2010-06-13 2:27 ` [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Wan, Huaxu
2010-07-26 8:16 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Maxim Levitsky
2010-07-26 8:16 ` [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Maxim Levitsky
2010-08-30 1:42 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Huaxu Wan
2010-08-30 1:42 ` [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Huaxu Wan
2010-08-31 21:01 ` [lm-sensors] [PATCH 2/2] hwmon: (coretemp) Get TjMax value from Fenghua Yu
2010-08-31 21:01 ` [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR Fenghua Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100517094136.094800562@osadl.org \
--to=c.emde@osadl.org \
--cc=akpm@linux-foundation.org \
--cc=huaxu.wan@intel.com \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.