From: Jean Delvare <khali@linux-fr.org>
To: Andre Prendel <andre.prendel@gmx.de>
Cc: linuxppc-dev@lists.ozlabs.org, lm-sensors@lm-sensors.org
Subject: Re: [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd
Date: Wed, 19 May 2010 13:16:26 +0000 [thread overview]
Message-ID: <20100519151626.1e1262be@hyperion.delvare> (raw)
In-Reply-To: <20100519072659.GA2069@andre-laptop>
Hi Andre,
On Wed, 19 May 2010 09:26:59 +0200, Andre Prendel wrote:
> Jean, should we describe this interface in Documentation/hwmon/sysfs-interface
> too? For the moment tmp421 is the only driver implementing it.
If the values are expressed in a standard unit (i.e. not raw register
values) then yes, it would be nice to have a standard interface
described for these files.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Jean Delvare <khali@linux-fr.org>
To: Andre Prendel <andre.prendel@gmx.de>
Cc: linuxppc-dev@lists.ozlabs.org, lm-sensors@lm-sensors.org
Subject: Re: [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt)
Date: Wed, 19 May 2010 15:16:26 +0200 [thread overview]
Message-ID: <20100519151626.1e1262be@hyperion.delvare> (raw)
In-Reply-To: <20100519072659.GA2069@andre-laptop>
Hi Andre,
On Wed, 19 May 2010 09:26:59 +0200, Andre Prendel wrote:
> Jean, should we describe this interface in Documentation/hwmon/sysfs-interface
> too? For the moment tmp421 is the only driver implementing it.
If the values are expressed in a standard unit (i.e. not raw register
values) then yes, it would be nice to have a standard interface
described for these files.
--
Jean Delvare
next prev parent reply other threads:[~2010-05-19 13:16 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-10 14:43 [PATCH] hwmon: (tmp421) Add nfactor support Jeff Angielski
2010-05-11 19:03 ` [lm-sensors] " Andre Prendel
2010-05-11 19:03 ` Andre Prendel
2010-05-11 19:12 ` [lm-sensors] " Jean Delvare
2010-05-11 19:12 ` Jean Delvare
2010-05-11 19:34 ` [lm-sensors] " Jeff Angielski
2010-05-11 19:34 ` Jeff Angielski
2010-05-12 7:27 ` [lm-sensors] " Jean Delvare
2010-05-12 7:27 ` Jean Delvare
2010-05-17 20:30 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Jeff Angielski
2010-05-17 20:30 ` [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Jeff Angielski
2010-05-18 11:38 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Andre Prendel
2010-05-18 11:38 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Andre Prendel
2010-05-18 14:35 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Jeff Angielski
2010-05-18 14:35 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Jeff Angielski
2010-05-19 7:26 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Andre Prendel
2010-05-19 7:26 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Andre Prendel
2010-05-19 13:16 ` Jean Delvare [this message]
2010-05-19 13:16 ` Jean Delvare
2010-05-19 17:13 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Jeff Angielski
2010-05-19 17:13 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Jeff Angielski
2010-05-20 18:50 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Andre Prendel
2010-05-20 18:50 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Andre Prendel
2010-05-20 19:07 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Jeff Angielski
2010-05-20 19:07 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Jeff Angielski
2010-05-20 19:35 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Andre Prendel
2010-05-20 19:35 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Andre Prendel
2010-06-18 14:53 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Andre Prendel
2010-06-18 14:53 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Andre Prendel
2010-07-20 15:09 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Andre Prendel
2010-07-20 15:09 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Andre Prendel
2010-07-20 15:59 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Guenter Roeck
2010-07-21 19:46 ` Andre Prendel
2010-07-21 19:46 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Andre Prendel
2010-08-14 19:15 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd Jean Delvare
2010-08-14 19:15 ` [lm-sensors] [PATCH] hwmon: (tmp421) Add nfactor support (2nd attempt) Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100519151626.1e1262be@hyperion.delvare \
--to=khali@linux-fr.org \
--cc=andre.prendel@gmx.de \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.