From: Guenter Roeck <guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>
To: Joe Perches <joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org>
Cc: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>,
Andrew Morton
<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>,
Randy Dunlap <rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org>,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Mark Brown
<broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>,
Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
"David S. Miller" <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>,
Paul Goyette <paul-3orOWTcw9wBWk0Htik3J/w@public.gmane.org>,
"lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org"
<lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH v2] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors
Date: Sun, 11 Jul 2010 09:16:58 -0700 [thread overview]
Message-ID: <20100711161658.GA23927@ericsson.com> (raw)
In-Reply-To: <1278862266.1501.59.camel-AkRN8/LKpobuYGix6ZUp1Q@public.gmane.org>
On Sun, Jul 11, 2010 at 11:31:06AM -0400, Joe Perches wrote:
> On Sun, 2010-07-11 at 07:53 -0700, Guenter Roeck wrote:
> > diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
> > new file mode 100644
> > index 0000000..685057d
> > --- /dev/null
> > +++ b/drivers/hwmon/jc42.c
> []
> > +struct jc42_chips {
> > + u16 manid;
> > + u16 devid;
> > + u16 devid_mask;
> > +};
> > +
> > +static struct jc42_chips jc42_chips[] = {
> > + { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
> > + { IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK },
> > + { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
> > + { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
> > + { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
> > + { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
> > + { NXP_MANID, SE97_DEVID, SE97_DEVID_MASK },
> > + { ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
> > + { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
> > + { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
> > + { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
> > +};
> []
> > + for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
> > + if (manid == jc42_chips[i].manid
> > + && (devid & jc42_chips[i].devid_mask) ==
> > + jc42_chips[i].devid) {
> > + strlcpy(info->type, "jc42", I2C_NAME_SIZE);
> > + return 0;
> > + }
> > + }
>
> Decidedly trivial:
>
> Kernel style seems to prefer having logical tests at
> end of line rather than start of line.
>
Ok. Would be nice to have checkpatch.pl complain about it, though,
if it is a to-be-enforced rule.
> Maybe this bit would be more readable with a temporary:
>
> for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
> struct jc42_chips *chip = &jc42_chips[i];
> if (manid == chip->manid &&
> (devid & chip->devid_mask) == chip->devid) {
> strlcpy(info->type, "jc42", I2C_NAME_SIZE);
> return 0;
> }
> }
>
Agreed. I'll change that.
Thanks,
Guenter
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <guenter.roeck@ericsson.com>
To: Joe Perches <joe@perches.com>
Cc: Jean Delvare <khali@linux-fr.org>,
Andrew Morton <akpm@linux-foundation.org>,
Randy Dunlap <rdunlap@xenotime.net>,
Hans de Goede <hdegoede@redhat.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Samuel Ortiz <sameo@linux.intel.com>,
"David S. Miller" <davem@davemloft.net>,
Paul Goyette <paul@whooppee.com>,
"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>
Subject: Re: [PATCH v2] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors
Date: Sun, 11 Jul 2010 09:16:58 -0700 [thread overview]
Message-ID: <20100711161658.GA23927@ericsson.com> (raw)
In-Reply-To: <1278862266.1501.59.camel@Joe-Laptop.home>
On Sun, Jul 11, 2010 at 11:31:06AM -0400, Joe Perches wrote:
> On Sun, 2010-07-11 at 07:53 -0700, Guenter Roeck wrote:
> > diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
> > new file mode 100644
> > index 0000000..685057d
> > --- /dev/null
> > +++ b/drivers/hwmon/jc42.c
> []
> > +struct jc42_chips {
> > + u16 manid;
> > + u16 devid;
> > + u16 devid_mask;
> > +};
> > +
> > +static struct jc42_chips jc42_chips[] = {
> > + { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
> > + { IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK },
> > + { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
> > + { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
> > + { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
> > + { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
> > + { NXP_MANID, SE97_DEVID, SE97_DEVID_MASK },
> > + { ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
> > + { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
> > + { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
> > + { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
> > +};
> []
> > + for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
> > + if (manid == jc42_chips[i].manid
> > + && (devid & jc42_chips[i].devid_mask) ==
> > + jc42_chips[i].devid) {
> > + strlcpy(info->type, "jc42", I2C_NAME_SIZE);
> > + return 0;
> > + }
> > + }
>
> Decidedly trivial:
>
> Kernel style seems to prefer having logical tests at
> end of line rather than start of line.
>
Ok. Would be nice to have checkpatch.pl complain about it, though,
if it is a to-be-enforced rule.
> Maybe this bit would be more readable with a temporary:
>
> for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
> struct jc42_chips *chip = &jc42_chips[i];
> if (manid == chip->manid &&
> (devid & chip->devid_mask) == chip->devid) {
> strlcpy(info->type, "jc42", I2C_NAME_SIZE);
> return 0;
> }
> }
>
Agreed. I'll change that.
Thanks,
Guenter
next prev parent reply other threads:[~2010-07-11 16:16 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-11 14:53 [PATCH v2] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors Guenter Roeck
2010-07-11 14:53 ` Guenter Roeck
[not found] ` <1278859984-22593-1-git-send-email-guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>
2010-07-11 15:31 ` Joe Perches
2010-07-11 15:31 ` Joe Perches
[not found] ` <1278862266.1501.59.camel-AkRN8/LKpobuYGix6ZUp1Q@public.gmane.org>
2010-07-11 16:16 ` Guenter Roeck [this message]
2010-07-11 16:16 ` Guenter Roeck
2010-07-11 16:21 ` Jean Delvare
2010-07-11 16:21 ` Jean Delvare
[not found] ` <20100711182138.132815e4-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2010-07-11 18:57 ` [PATCH] scripts/checkpatch.pl: Add strict test of logical test continuations at beginning of line Joe Perches
2010-07-11 18:57 ` Joe Perches
[not found] ` <1278874632.1501.68.camel-AkRN8/LKpobuYGix6ZUp1Q@public.gmane.org>
2010-07-11 19:34 ` Jean Delvare
2010-07-11 19:34 ` Jean Delvare
[not found] ` <20100711213444.4243014c-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2010-07-11 19:52 ` Joe Perches
2010-07-11 19:52 ` Joe Perches
[not found] ` <1278877979.1501.76.camel-AkRN8/LKpobuYGix6ZUp1Q@public.gmane.org>
2010-07-11 21:15 ` Guenter Roeck
2010-07-11 21:15 ` Guenter Roeck
2010-07-12 22:49 ` [PATCH v2] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors Andrew Morton
2010-07-12 22:49 ` Andrew Morton
[not found] ` <20100712154949.3230beec.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2010-07-12 23:07 ` Guenter Roeck
2010-07-12 23:07 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100711161658.GA23927@ericsson.com \
--to=guenter.roeck-izefyvvap7pwk0htik3j/w@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=paul-3orOWTcw9wBWk0Htik3J/w@public.gmane.org \
--cc=rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.