From: Tony Lindgren <tony@atomide.com>
To: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: linux-omap@vger.kernel.org
Subject: Re: 4430SDP boot failure
Date: Mon, 10 Jan 2011 10:52:09 -0800 [thread overview]
Message-ID: <20110110185209.GC4957@atomide.com> (raw)
In-Reply-To: <20110107161230.GR1198@n2100.arm.linux.org.uk>
* Russell King - ARM Linux <linux@arm.linux.org.uk> [110107 08:12]:
> On Thu, Jan 06, 2011 at 12:40:54PM -0800, Tony Lindgren wrote:
> > Anyways, I can debug the DEBUG_LL booting issue further if the patch
> > I posted does not help.
>
> This is what I ended up with earlier today to make the debug code work
> both in the decompressor and in the kernel - once I had it working I
> haven't bothered putting any more effort into it.
Hmm I have DEBUG_LL working fine (execept not for the uncompress code).
Looks like the only issue I have with my 4430 es1.0 blaze board is
that it won't boot reliably unless I disable l2x0_init.
Have you guys seen this issue?
Of course there are all kinds of omap4 warnings there, but after
disabling l2x0_init I was able to run apt-get dist-upgrade on my
board. This is with what I have queued up in omap-fixes.
Regards,
Tony
next prev parent reply other threads:[~2011-01-10 18:52 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-06 17:08 4430SDP boot failure Russell King - ARM Linux
2011-01-06 17:25 ` Nishanth Menon
2011-01-06 18:00 ` Russell King - ARM Linux
2011-01-06 18:17 ` Russell King - ARM Linux
2011-01-06 18:25 ` Tony Lindgren
2011-01-06 18:20 ` Tony Lindgren
2011-01-06 19:52 ` Tony Lindgren
2011-01-06 20:34 ` Tony Lindgren
2011-01-06 20:51 ` Russell King - ARM Linux
2011-01-06 21:11 ` Russell King - ARM Linux
2011-01-06 23:52 ` Russell King - ARM Linux
2011-01-07 4:11 ` Tony Lindgren
2011-01-07 8:39 ` Santosh Shilimkar
2011-01-07 9:28 ` Russell King - ARM Linux
2011-01-07 9:52 ` Santosh Shilimkar
2011-01-07 12:18 ` Santosh Shilimkar
2011-01-07 12:24 ` Santosh Shilimkar
2011-01-07 12:51 ` Russell King - ARM Linux
2011-01-07 13:07 ` Koen Kooi
2011-01-07 13:58 ` Russell King - ARM Linux
2011-01-07 13:09 ` Santosh Shilimkar
2011-01-07 14:24 ` Russell King - ARM Linux
2011-01-07 14:26 ` Santosh Shilimkar
2011-01-07 15:49 ` 4430SDP boot failure - solved + SPI bug fix Russell King - ARM Linux
2011-01-07 17:10 ` Tony Lindgren
2011-01-07 17:19 ` Grant Likely
2011-01-07 17:25 ` Tony Lindgren
2011-01-07 20:24 ` Russell King - ARM Linux
2011-01-07 18:25 ` Santosh Shilimkar
2011-01-07 18:52 ` Russell King - ARM Linux
2011-01-07 19:05 ` Santosh Shilimkar
2011-01-07 19:19 ` Russell King - ARM Linux
2011-01-07 19:28 ` Santosh Shilimkar
2011-01-07 20:24 ` Russell King - ARM Linux
2011-01-07 16:24 ` 4430SDP boot failure Russell King - ARM Linux
2011-01-07 17:02 ` Daniel Díaz
2011-01-07 18:29 ` Santosh Shilimkar
2011-01-07 18:55 ` Russell King - ARM Linux
2011-01-06 20:32 ` Russell King - ARM Linux
2011-01-06 20:40 ` Tony Lindgren
2011-01-07 16:12 ` Russell King - ARM Linux
2011-01-10 18:52 ` Tony Lindgren [this message]
2011-01-11 23:16 ` [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure) Tony Lindgren
2011-01-11 23:16 ` Tony Lindgren
2011-01-13 8:52 ` Anand Gadiyar
2011-01-13 8:52 ` Anand Gadiyar
2011-01-13 9:15 ` Russell King - ARM Linux
2011-01-13 9:15 ` Russell King - ARM Linux
2011-01-13 15:51 ` Tony Lindgren
2011-01-13 15:51 ` Tony Lindgren
2011-01-13 16:49 ` Russell King - ARM Linux
2011-01-13 16:49 ` Russell King - ARM Linux
2011-01-14 17:29 ` Tony Lindgren
2011-01-14 17:29 ` Tony Lindgren
2011-01-14 19:18 ` Paul Walmsley
2011-01-14 19:18 ` Paul Walmsley
2011-01-14 21:20 ` Russell King - ARM Linux
2011-01-14 21:20 ` Russell King - ARM Linux
2011-01-14 22:07 ` Paul Walmsley
2011-01-14 22:07 ` Paul Walmsley
2011-01-14 23:10 ` Paul Walmsley
2011-01-14 23:10 ` Paul Walmsley
2011-01-14 23:58 ` Russell King - ARM Linux
2011-01-14 23:58 ` Russell King - ARM Linux
2011-01-15 0:12 ` Tony Lindgren
2011-01-15 0:12 ` Tony Lindgren
2011-01-15 0:25 ` Russell King - ARM Linux
2011-01-15 0:25 ` Russell King - ARM Linux
2011-01-15 0:37 ` Tony Lindgren
2011-01-15 0:37 ` Tony Lindgren
2011-01-15 17:04 ` Russell King - ARM Linux
2011-01-15 17:04 ` Russell King - ARM Linux
2011-01-17 8:35 ` Sascha Hauer
2011-01-17 8:35 ` Sascha Hauer
2011-02-01 12:55 ` Anand Gadiyar
2011-02-01 12:55 ` Anand Gadiyar
2011-02-02 1:10 ` Tony Lindgren
2011-02-02 1:10 ` Tony Lindgren
2011-02-02 6:05 ` Santosh Shilimkar
2011-02-02 6:05 ` Santosh Shilimkar
2011-02-02 19:48 ` Tony Lindgren
2011-02-02 19:48 ` Tony Lindgren
2011-02-03 8:43 ` Santosh Shilimkar
2011-02-03 8:43 ` Santosh Shilimkar
2011-02-12 8:46 ` Santosh Shilimkar
2011-02-12 8:46 ` Santosh Shilimkar
2011-02-24 17:38 ` Tony Lindgren
2011-02-24 17:38 ` Tony Lindgren
2011-02-25 5:33 ` Santosh Shilimkar
2011-02-25 5:33 ` Santosh Shilimkar
2011-02-25 17:49 ` Tony Lindgren
2011-02-25 17:49 ` Tony Lindgren
2011-02-02 18:43 ` Anand Gadiyar
2011-02-02 18:43 ` Anand Gadiyar
2011-02-02 19:50 ` Tony Lindgren
2011-02-02 19:50 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110110185209.GC4957@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.