From: Tony Lindgren <tony@atomide.com>
To: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Cc: Paul Walmsley <paul@pwsan.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2] ARM: OMAP1: Move dpll1 rates selection from config to runtime
Date: Thu, 8 Dec 2011 18:09:22 -0800 [thread overview]
Message-ID: <20111209020922.GN31337@atomide.com> (raw)
In-Reply-To: <1323395476-26548-1-git-send-email-jkrzyszt@tis.icnet.pl>
* Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> [111208 17:24]:
> For still better multi-OMAP1 support, expand omap1_rate_table with flags
> for different SoC types and match them while selecting clock rates. The
> idea is stolen from current omap24xx clock rate selection algorithm.
>
> Since clkdev platform flag definitions are reused here, those had to be
> expanded with one extra entry for OMAP1710 subtype, as this is the only
> SoC for which we allow selection of the highest, 216 MHz rate.
>
> Once done, remove no longer needed clock rate configure time options.
>
> Created against linux-omap/master tip as of Thu Dec 1,
> commit f83c2a8cbb59981722d1ab610c79adfd034a2667.
> Tested on Amstrad Delta.
>
> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
> ---
> v2: limit OMAP1510 rate to 150 MHz, or some boards may not work.
Thanks pushing them all into omap1 branch, can you please check
that I got all the patches? I've boot tested it here on h2/osk/770.
Tony
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM: OMAP1: Move dpll1 rates selection from config to runtime
Date: Thu, 8 Dec 2011 18:09:22 -0800 [thread overview]
Message-ID: <20111209020922.GN31337@atomide.com> (raw)
In-Reply-To: <1323395476-26548-1-git-send-email-jkrzyszt@tis.icnet.pl>
* Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> [111208 17:24]:
> For still better multi-OMAP1 support, expand omap1_rate_table with flags
> for different SoC types and match them while selecting clock rates. The
> idea is stolen from current omap24xx clock rate selection algorithm.
>
> Since clkdev platform flag definitions are reused here, those had to be
> expanded with one extra entry for OMAP1710 subtype, as this is the only
> SoC for which we allow selection of the highest, 216 MHz rate.
>
> Once done, remove no longer needed clock rate configure time options.
>
> Created against linux-omap/master tip as of Thu Dec 1,
> commit f83c2a8cbb59981722d1ab610c79adfd034a2667.
> Tested on Amstrad Delta.
>
> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
> ---
> v2: limit OMAP1510 rate to 150 MHz, or some boards may not work.
Thanks pushing them all into omap1 branch, can you please check
that I got all the patches? I've boot tested it here on h2/osk/770.
Tony
next prev parent reply other threads:[~2011-12-09 2:09 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-27 3:32 [PATCH 0/5] ARM: OMAP1: Fix dpll1 reprogramming related issues Janusz Krzysztofik
2011-11-27 3:32 ` Janusz Krzysztofik
2011-11-27 3:32 ` Janusz Krzysztofik
2011-11-27 3:32 ` [PATCH 1/5] ARM: OMAP1: Fix dpll1 default rate reprogramming method Janusz Krzysztofik
2011-11-27 3:32 ` Janusz Krzysztofik
2011-11-28 17:45 ` Tony Lindgren
2011-11-28 17:45 ` Tony Lindgren
2011-11-28 22:00 ` [PATCH 2a/5] Remove unsafe clock values from omap1_defconfig Janusz Krzysztofik
2011-11-28 22:00 ` Janusz Krzysztofik
2011-11-30 22:32 ` Tony Lindgren
2011-11-30 22:32 ` Tony Lindgren
2011-11-30 20:57 ` [PATCH 2a/5 v2] ARM: OMAP1: select clock rate by CPU type Janusz Krzysztofik
2011-11-30 20:57 ` Janusz Krzysztofik
2011-11-30 22:28 ` Tony Lindgren
2011-11-30 22:28 ` Tony Lindgren
2011-12-01 10:10 ` Janusz Krzysztofik
2011-12-01 10:10 ` Janusz Krzysztofik
2011-12-01 18:22 ` Tony Lindgren
2011-12-01 18:22 ` Tony Lindgren
2011-12-01 18:54 ` Janusz Krzysztofik
2011-12-01 18:54 ` Janusz Krzysztofik
2011-12-01 19:06 ` Tony Lindgren
2011-12-01 19:06 ` Tony Lindgren
2011-12-04 12:17 ` [PATCH] ARM: OMAP1: Move dpll1 rates selection from config to runtime Janusz Krzysztofik
2011-12-04 12:17 ` Janusz Krzysztofik
2011-12-08 23:13 ` Janusz Krzysztofik
2011-12-08 23:13 ` Janusz Krzysztofik
2011-12-09 1:51 ` [PATCH v2] " Janusz Krzysztofik
2011-12-09 1:51 ` Janusz Krzysztofik
2011-12-09 2:09 ` Tony Lindgren [this message]
2011-12-09 2:09 ` Tony Lindgren
2011-12-09 2:31 ` Janusz Krzysztofik
2011-12-09 2:31 ` Janusz Krzysztofik
2011-12-09 1:51 ` [PATCH] ARM: OMAP1: Set the omap1623 sram size to 16K Tony Lindgren
2011-12-09 1:51 ` Tony Lindgren
[not found] ` <201112010310.43890.jkrzyszt@tis.icnet.pl>
[not found] ` <20111201022750.GY13928@atomide.com>
2011-12-01 9:54 ` [PATCH 2a/5] Remove unsafe clock values from omap1_defconfig Janusz Krzysztofik
2011-12-01 9:54 ` Janusz Krzysztofik
2011-12-01 10:21 ` Janusz Krzysztofik
2011-12-01 10:21 ` Janusz Krzysztofik
2011-12-01 17:17 ` Tony Lindgren
2011-12-01 17:17 ` Tony Lindgren
2011-12-01 18:38 ` Janusz Krzysztofik
2011-12-01 18:38 ` Janusz Krzysztofik
2011-12-01 19:04 ` Tony Lindgren
2011-12-01 19:04 ` Tony Lindgren
2011-12-01 19:23 ` Janusz Krzysztofik
2011-12-01 19:23 ` Janusz Krzysztofik
2011-12-01 19:46 ` Tony Lindgren
2011-12-01 19:46 ` Tony Lindgren
2011-12-01 20:30 ` [PATCH] ARM: OMAP1: " Janusz Krzysztofik
2011-12-01 20:30 ` Janusz Krzysztofik
2011-12-01 20:13 ` [PATCH 0/2 v2] ARM: OMAP1: Fix dpll1 reprogramming related issues Janusz Krzysztofik
2011-12-01 20:13 ` Janusz Krzysztofik
2011-12-01 21:16 ` [PATCH v2] ARM: OMAP1: Update dpll1 default rate reprogramming method Janusz Krzysztofik
2011-12-01 21:16 ` Janusz Krzysztofik
2011-12-02 2:09 ` [PATCH 0/2 v2] ARM: OMAP1: Fix dpll1 reprogramming related issues Tony Lindgren
2011-12-02 2:09 ` Tony Lindgren
2011-12-02 17:02 ` Janusz Krzysztofik
2011-12-02 17:02 ` Janusz Krzysztofik
2011-12-01 20:13 ` [PATCH 1/2 v2] ARM: OMAP1: Fix ckctl value used for dpll1 defualt rate Janusz Krzysztofik
2011-12-01 20:13 ` Janusz Krzysztofik
2011-12-01 20:13 ` [PATCH 2/2 v2] ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram Janusz Krzysztofik
2011-12-01 20:13 ` Janusz Krzysztofik
2011-12-04 15:07 ` [PATCH] ARM: OMAP1: Always reprogramme dpll1 rate at boot Janusz Krzysztofik
2011-12-04 15:07 ` Janusz Krzysztofik
2011-11-27 3:32 ` [PATCH 2/5] ARM: OMAP1: Fix ckctl value used for dpll1 defualt rate Janusz Krzysztofik
2011-11-27 3:32 ` Janusz Krzysztofik
2011-11-27 3:32 ` [PATCH 3/5] ARM: OMAP1: Fix dpll1 reprogramming not actually allowed Janusz Krzysztofik
2011-11-27 3:32 ` Janusz Krzysztofik
2011-11-28 17:46 ` Tony Lindgren
2011-11-28 17:46 ` Tony Lindgren
2011-11-27 3:32 ` [PATCH 4/5] init/calibrate.c: allow for recalibration of loops per jiffy Janusz Krzysztofik
2011-11-27 3:32 ` Janusz Krzysztofik
2011-11-28 15:39 ` Russell King - ARM Linux
2011-11-28 15:39 ` Russell King - ARM Linux
2011-11-28 22:30 ` Janusz Krzysztofik
2011-11-28 22:30 ` Janusz Krzysztofik
2011-11-27 3:32 ` [PATCH 5/5] ARM: OMAP1: recalibrate loops per jiffy after dpll1 reprogram Janusz Krzysztofik
2011-11-27 3:32 ` Janusz Krzysztofik
2011-11-29 0:25 ` [PATCH 5/5 v2] ARM: OMAP1: recalculate " Janusz Krzysztofik
2011-11-29 0:25 ` Janusz Krzysztofik
2011-12-09 8:42 ` Russell King - ARM Linux
2011-12-09 8:42 ` Russell King - ARM Linux
2011-12-09 10:00 ` Janusz Krzysztofik
2011-12-09 10:00 ` Janusz Krzysztofik
2011-12-09 10:09 ` Janusz Krzysztofik
2011-12-09 10:09 ` Janusz Krzysztofik
2011-12-10 0:25 ` Russell King - ARM Linux
2011-12-10 0:25 ` Russell King - ARM Linux
2011-12-10 12:04 ` Janusz Krzysztofik
2011-12-10 12:04 ` Janusz Krzysztofik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111209020922.GN31337@atomide.com \
--to=tony@atomide.com \
--cc=jkrzyszt@tis.icnet.pl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.