All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
	Fabio Estevam <fabio.estevam@freescale.com>,
	Chris Ball <cjb@laptop.org>,
	linux-mmc@vger.kernel.org
Subject: Re: [PATCH 4/4] MXS-MMC: Add wp-inverted property
Date: Mon, 21 May 2012 04:38:20 +0200	[thread overview]
Message-ID: <201205210438.20794.marex@denx.de> (raw)
In-Reply-To: <20120521013915.GN5427@S2101-09.ap.freescale.net>

Dear Shawn Guo,

> Copy Chris and linux-mmc, as I assume that the patch should go via mmc
> tree after the merge window.
> 
> On Mon, May 21, 2012 at 03:02:20AM +0200, Marek Vasut wrote:
> > The write-protect GPIO is inverted on some boards. Handle such case.
> > 
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Shawn Guo <shawn.guo@linaro.org>
> > Cc: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Acked-by: Shawn Guo <shawn.guo@linaro.org>
> 
> A coupe of nits though:
> 
> The subject prefix can better be "mmc: mxs-mmc: ".

Want me to resend it ?

> 
> > ---
> > 
> >  Documentation/devicetree/bindings/mmc/mxs-mmc.txt |    1 +
> >  drivers/mmc/host/mxs-mmc.c                        |   11 ++++++++++-
> >  2 files changed, 11 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
> > b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt index
> > 14d870a..0a7d2cd 100644
> > --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
> > +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
> > 
> > @@ -13,6 +13,7 @@ Required properties:
> >  Optional properties:
> >  - wp-gpios: Specify GPIOs for write protection
> > 
> > +- wp-inverted: Set if the write protection GPIO is inverted
> > 
> >  Examples:
> > diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
> > index 277161d..119beb9 100644
> > --- a/drivers/mmc/host/mxs-mmc.c
> > +++ b/drivers/mmc/host/mxs-mmc.c
> > @@ -164,16 +164,23 @@ struct mxs_mmc_host {
> > 
> >  	spinlock_t			lock;
> >  	int				sdio_irq_en;
> >  	int				wp_gpio;
> > 
> > +	int				wp_inverted:1;
> > 
> >  };
> >  
> >  static int mxs_mmc_get_ro(struct mmc_host *mmc)
> >  {
> >  
> >  	struct mxs_mmc_host *host = mmc_priv(mmc);
> > 
> > +	int ret;
> > 
> >  	if (!gpio_is_valid(host->wp_gpio))
> >  	
> >  		return -EINVAL;
> > 
> > -	return gpio_get_value(host->wp_gpio);
> > +	ret = gpio_get_value(host->wp_gpio);
> > +
> > +	if (host->wp_inverted)
> > +		ret = !ret;
> > +
> > +	return ret;
> 
> The above lines can just be the one below?
> 
> 	return (host->wp_inverted) ? !ret : ret;

I'd prefer to avoid the ternary operator, it's more readable as it is.

> 
> >  }

Best regards,
Marek Vasut

WARNING: multiple messages have this Message-ID (diff)
From: marex@denx.de (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] MXS-MMC: Add wp-inverted property
Date: Mon, 21 May 2012 04:38:20 +0200	[thread overview]
Message-ID: <201205210438.20794.marex@denx.de> (raw)
In-Reply-To: <20120521013915.GN5427@S2101-09.ap.freescale.net>

Dear Shawn Guo,

> Copy Chris and linux-mmc, as I assume that the patch should go via mmc
> tree after the merge window.
> 
> On Mon, May 21, 2012 at 03:02:20AM +0200, Marek Vasut wrote:
> > The write-protect GPIO is inverted on some boards. Handle such case.
> > 
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Shawn Guo <shawn.guo@linaro.org>
> > Cc: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Acked-by: Shawn Guo <shawn.guo@linaro.org>
> 
> A coupe of nits though:
> 
> The subject prefix can better be "mmc: mxs-mmc: ".

Want me to resend it ?

> 
> > ---
> > 
> >  Documentation/devicetree/bindings/mmc/mxs-mmc.txt |    1 +
> >  drivers/mmc/host/mxs-mmc.c                        |   11 ++++++++++-
> >  2 files changed, 11 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
> > b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt index
> > 14d870a..0a7d2cd 100644
> > --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
> > +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
> > 
> > @@ -13,6 +13,7 @@ Required properties:
> >  Optional properties:
> >  - wp-gpios: Specify GPIOs for write protection
> > 
> > +- wp-inverted: Set if the write protection GPIO is inverted
> > 
> >  Examples:
> > diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
> > index 277161d..119beb9 100644
> > --- a/drivers/mmc/host/mxs-mmc.c
> > +++ b/drivers/mmc/host/mxs-mmc.c
> > @@ -164,16 +164,23 @@ struct mxs_mmc_host {
> > 
> >  	spinlock_t			lock;
> >  	int				sdio_irq_en;
> >  	int				wp_gpio;
> > 
> > +	int				wp_inverted:1;
> > 
> >  };
> >  
> >  static int mxs_mmc_get_ro(struct mmc_host *mmc)
> >  {
> >  
> >  	struct mxs_mmc_host *host = mmc_priv(mmc);
> > 
> > +	int ret;
> > 
> >  	if (!gpio_is_valid(host->wp_gpio))
> >  	
> >  		return -EINVAL;
> > 
> > -	return gpio_get_value(host->wp_gpio);
> > +	ret = gpio_get_value(host->wp_gpio);
> > +
> > +	if (host->wp_inverted)
> > +		ret = !ret;
> > +
> > +	return ret;
> 
> The above lines can just be the one below?
> 
> 	return (host->wp_inverted) ? !ret : ret;

I'd prefer to avoid the ternary operator, it's more readable as it is.

> 
> >  }

Best regards,
Marek Vasut

  reply	other threads:[~2012-05-21  2:38 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-21  1:02 [PATCH 1/4] GPMI-NAND: Define ecc.strength Marek Vasut
2012-05-21  1:02 ` [PATCH 2/4] GPMI-NAND: Fixup compile issue Marek Vasut
2012-05-21  1:16   ` Shawn Guo
2012-05-21  1:02 ` [PATCH 3/4] MXS-MMC: Move of_match_table out of CONFIG_PM Marek Vasut
2012-05-21  4:09   ` Shawn Guo
2012-05-21  4:09     ` Shawn Guo
2012-05-21  3:52     ` Chris Ball
2012-05-21  3:52       ` Chris Ball
2012-05-21  4:33       ` Marek Vasut
2012-05-21  4:33         ` Marek Vasut
2012-05-21  1:02 ` [PATCH 4/4] MXS-MMC: Add wp-inverted property Marek Vasut
2012-05-21  1:39   ` Shawn Guo
2012-05-21  1:39     ` Shawn Guo
2012-05-21  2:38     ` Marek Vasut [this message]
2012-05-21  2:38       ` Marek Vasut
2012-05-21  2:48       ` Shawn Guo
2012-05-21  2:48         ` Shawn Guo
2012-05-21  3:22         ` Chris Ball
2012-05-21  3:22           ` Chris Ball
2012-05-21  3:36           ` Marek Vasut
2012-05-21  3:36             ` Marek Vasut
2012-05-21  7:22   ` Lothar Waßmann
2012-05-21 17:38     ` Marek Vasut
2012-05-21  1:14 ` [PATCH 1/4] GPMI-NAND: Define ecc.strength Shawn Guo
2012-05-21  1:14   ` Shawn Guo
2012-05-21  1:36   ` Marek Vasut
2012-05-21  1:36     ` Marek Vasut
2012-05-21  1:41     ` Shawn Guo
2012-05-21  1:41       ` Shawn Guo
2012-05-21  2:40       ` Marek Vasut
2012-05-21  2:40         ` Marek Vasut
2012-05-21  3:08         ` Huang Shijie
2012-05-21  3:08           ` Huang Shijie
2012-05-21  3:48           ` Marek Vasut
2012-05-21  3:48             ` Marek Vasut
2012-05-21  3:45         ` Shawn Guo
2012-05-21  3:45           ` Shawn Guo
2012-05-21  3:39           ` Marek Vasut
2012-05-21  3:39             ` Marek Vasut
2012-05-21  2:44       ` Huang Shijie
2012-05-21  2:44         ` Huang Shijie
2012-05-21  3:43         ` Marek Vasut
2012-05-21  3:43           ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201205210438.20794.marex@denx.de \
    --to=marex@denx.de \
    --cc=cjb@laptop.org \
    --cc=fabio.estevam@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=shawn.guo@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.