From: cavokz@gmail.com (Domenico Andreoli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] ARM: bcm476x: Instantiate console UART
Date: Sun, 07 Oct 2012 03:53:06 +0200 [thread overview]
Message-ID: <20121007015407.840781689@gmail.com> (raw)
In-Reply-To: 20121007015300.828366635@gmail.com
An embedded and charset-unspecified text was scrubbed...
Name: arm-bcm476x-instantiate-console-uart.patch
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121007/2d7eb5d9/attachment.ksh>
WARNING: multiple messages have this Message-ID (diff)
From: Domenico Andreoli <cavokz@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Domenico Andreoli <domenico.andreoli@linux.com>,
devicetree-discuss@lists.ozlabs.org
Subject: [PATCH 6/6] ARM: bcm476x: Instantiate console UART
Date: Sun, 07 Oct 2012 03:53:06 +0200 [thread overview]
Message-ID: <20121007015407.840781689@gmail.com> (raw)
In-Reply-To: 20121007015300.828366635@gmail.com
[-- Attachment #1: arm-bcm476x-instantiate-console-uart.patch --]
[-- Type: text/plain, Size: 2731 bytes --]
From: Domenico Andreoli <domenico.andreoli@linux.com>
The BCM476x sports standard PL011 UARTs which are fully described and
put to use with these few changes.
Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com>
---
arch/arm/Kconfig.debug | 16 ++++++++++++++++
arch/arm/boot/dts/bcm476x.dtsi | 23 ++++++++++++++++++++++-
2 files changed, 38 insertions(+), 1 deletion(-)
Index: b/arch/arm/boot/dts/bcm476x.dtsi
===================================================================
--- a/arch/arm/boot/dts/bcm476x.dtsi
+++ b/arch/arm/boot/dts/bcm476x.dtsi
@@ -5,7 +5,7 @@
model = "Broadcom BCM476x";
chosen {
- bootargs = "earlyprintk";
+ bootargs = "console=ttyAMA1";
};
amba {
@@ -41,5 +41,26 @@
interrupt-controller;
#interrupt-cells = <1>;
};
+
+ uart0@c0000 {
+ compatible = "brcm,bcm476x-pl011", "arm,pl011", "arm,primecell";
+ reg = <0xc0000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <14>;
+ };
+
+ uart1@c1000 {
+ compatible = "brcm,bcm476x-pl011", "arm,pl011", "arm,primecell";
+ reg = <0xc1000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <15>;
+ };
+
+ uart2@b2000 {
+ compatible = "brcm,bcm476x-pl011", "arm,pl011", "arm,primecell";
+ reg = <0xb2000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <16>;
+ };
};
};
Index: b/arch/arm/Kconfig.debug
===================================================================
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -89,6 +89,18 @@ choice
bool "Kernel low-level debugging on 9263 and 9g45"
depends on HAVE_AT91_DBGU1
+ config DEBUG_BCM476X_UART0
+ depends on ARCH_BCM476X
+ bool "Kernel low-level debugging on BCM476x UART 0"
+
+ config DEBUG_BCM476X_UART1
+ depends on ARCH_BCM476X
+ bool "Kernel low-level debugging on BCM476x UART 1"
+
+ config DEBUG_BCM476X_UART2
+ depends on ARCH_BCM476X
+ bool "Kernel low-level debugging on BCM476x UART 2"
+
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
@@ -404,6 +416,8 @@ endchoice
config DEBUG_LL_INCLUDE
string
+ default "debug/bcm476x.S" if DEBUG_BCM476X_UART0 || \
+ DEBUG_BCM476X_UART1 || DEBUG_BCM476X_UART2
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART
@@ -416,6 +430,8 @@ config DEBUG_LL_INCLUDE
config UNCOMPRESS_INCLUDE
string
+ default "debug/bcm476x-uncompress.h" if DEBUG_BCM476X_UART0 || \
+ DEBUG_BCM476X_UART1 || DEBUG_BCM476X_UART2
default "debug/icedcc-uncompress.h" if DEBUG_ICEDCC
default "debug/mvebu-uncompress.h" if DEBUG_MVEBU_UART
default "debug/tegra-uncompress.h" if DEBUG_TEGRA_UART
next prev parent reply other threads:[~2012-10-07 1:53 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-07 1:53 [PATCH 0/6] ARM: Add support for Broadcom BCM476x SoCs Domenico Andreoli
2012-10-07 1:53 ` Domenico Andreoli
2012-10-07 1:53 ` [PATCH 1/6] ARM: bcm476x: Add infrastructure Domenico Andreoli
2012-10-07 1:53 ` Domenico Andreoli
2012-10-07 19:57 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-07 19:57 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-07 22:54 ` Domenico Andreoli
2012-10-07 22:54 ` Domenico Andreoli
2012-10-08 13:13 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-08 13:13 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-09 2:37 ` Stephen Warren
2012-10-09 2:37 ` Stephen Warren
2012-10-09 11:50 ` Domenico Andreoli
2012-10-09 11:50 ` Domenico Andreoli
2012-10-08 11:50 ` Florian Fainelli
2012-10-08 11:50 ` Florian Fainelli
2012-10-09 2:41 ` Stephen Warren
2012-10-09 2:41 ` Stephen Warren
2012-10-08 12:14 ` Thomas Petazzoni
2012-10-08 12:14 ` Thomas Petazzoni
2012-10-09 11:52 ` Domenico Andreoli
2012-10-09 11:52 ` Domenico Andreoli
2012-10-09 2:48 ` Stephen Warren
2012-10-09 2:48 ` Stephen Warren
2012-10-09 11:54 ` Domenico Andreoli
2012-10-09 11:54 ` Domenico Andreoli
2012-10-09 3:08 ` Stephen Warren
2012-10-09 3:08 ` Stephen Warren
2012-10-09 11:55 ` Domenico Andreoli
2012-10-09 11:55 ` Domenico Andreoli
2012-10-09 9:18 ` Arnd Bergmann
2012-10-09 9:18 ` Arnd Bergmann
2012-10-09 22:58 ` Domenico Andreoli
2012-10-09 22:58 ` Domenico Andreoli
2012-10-10 6:29 ` Arnd Bergmann
2012-10-10 6:29 ` Arnd Bergmann
2012-10-12 7:06 ` Domenico Andreoli
2012-10-12 7:06 ` Domenico Andreoli
2012-10-12 7:26 ` Thomas Petazzoni
2012-10-12 7:26 ` Thomas Petazzoni
2012-10-12 8:03 ` Arnd Bergmann
2012-10-12 8:03 ` Arnd Bergmann
2012-10-12 8:12 ` Thomas Petazzoni
2012-10-12 8:12 ` Thomas Petazzoni
2012-10-12 10:48 ` Arnd Bergmann
2012-10-12 10:48 ` Arnd Bergmann
2012-10-12 11:01 ` Thomas Petazzoni
2012-10-12 11:01 ` Thomas Petazzoni
2012-10-12 11:17 ` Arnd Bergmann
2012-10-12 11:17 ` Arnd Bergmann
2012-10-07 1:53 ` [PATCH 2/6] ARM: bcm476x: Add system timer Domenico Andreoli
2012-10-07 1:53 ` Domenico Andreoli
2012-10-08 11:50 ` Florian Fainelli
2012-10-08 11:50 ` Florian Fainelli
2012-10-09 2:43 ` Stephen Warren
2012-10-09 2:43 ` Stephen Warren
2012-10-09 23:04 ` Domenico Andreoli
2012-10-09 23:04 ` Domenico Andreoli
2012-10-07 1:53 ` [PATCH 3/6] ARM: bcm476x: Add sched clock Domenico Andreoli
2012-10-07 1:53 ` Domenico Andreoli
2012-10-09 2:54 ` Stephen Warren
2012-10-09 2:54 ` Stephen Warren
2012-10-07 1:53 ` [PATCH 4/6] ARM: bcm476x: Add stub clock driver Domenico Andreoli
2012-10-07 1:53 ` Domenico Andreoli
2012-10-09 3:00 ` Stephen Warren
2012-10-09 3:00 ` Stephen Warren
2012-10-12 14:52 ` Mike Turquette
2012-10-12 14:52 ` Mike Turquette
2012-10-12 15:28 ` Domenico Andreoli
2012-10-12 15:28 ` Domenico Andreoli
2012-10-07 1:53 ` [PATCH 5/6] ARM: bcm476x: Add restart hook Domenico Andreoli
2012-10-07 1:53 ` Domenico Andreoli
2012-10-07 1:53 ` Domenico Andreoli [this message]
2012-10-07 1:53 ` [PATCH 6/6] ARM: bcm476x: Instantiate console UART Domenico Andreoli
2012-10-07 20:03 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-07 20:03 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-07 23:14 ` Domenico Andreoli
2012-10-07 23:14 ` Domenico Andreoli
2012-10-09 3:06 ` Stephen Warren
2012-10-09 3:06 ` Stephen Warren
2012-10-09 23:37 ` Domenico Andreoli
2012-10-09 23:37 ` Domenico Andreoli
2012-10-07 5:22 ` [PATCH 0/6] ARM: Add support for Broadcom BCM476x SoCs Stephen Warren
2012-10-07 5:22 ` Stephen Warren
2012-10-07 10:14 ` Domenico Andreoli
2012-10-07 10:14 ` Domenico Andreoli
2012-10-09 2:44 ` Stephen Warren
2012-10-09 2:44 ` Stephen Warren
2012-10-09 23:57 ` Domenico Andreoli
2012-10-09 23:57 ` Domenico Andreoli
2012-10-07 19:47 ` Olof Johansson
2012-10-07 19:47 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121007015407.840781689@gmail.com \
--to=cavokz@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.