From: "John W. Linville" <linville@tuxdriver.com>
To: Greg KH <gregkh@linuxfoundation.org>
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
Bill Pemberton <wfp5p@virginia.edu>
Subject: Re: [GIT PULL] Remove __dev* markings from the networking drivers
Date: Thu, 6 Dec 2012 15:11:35 -0500 [thread overview]
Message-ID: <20121206201135.GA2246@tuxdriver.com> (raw)
In-Reply-To: <20121203202910.GB29451@kroah.com>
I went ahead and applied these as patches, since they were based on
something other than wireless-next. I hope that's OK!
John
On Mon, Dec 03, 2012 at 12:29:10PM -0800, Greg KH wrote:
> Hi John,
>
> Here's a pull request for all of Bill's __dev* removal patches for the
> wireless networking drivers, based on net-next. If you want this
> rebased on a different tree, or sent as patches (it's only 18 of them),
> please let me know.
>
> thanks,
>
> greg k-h
>
> -------------
>
> The following changes since commit 60e476d02129acb1f863a9b4932358678ee6a355:
>
> bna: remove useless calls to memset(). (2012-12-02 20:32:56 -0500)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/net-next.git tags/dev_removal_wireless
>
> for you to fetch changes up to 40ccc6ab03053a2ad1f52c8b3f4d3ee828b7c013:
>
> rtlwifi: remove __dev* attributes (2012-12-03 11:47:38 -0800)
>
> ----------------------------------------------------------------
> Wireless: Remove __dev* markings from the wireless drivers
>
> This is a series of patches that remove the dev* attributes for all
> wireless drivers.
>
> Use of __devinit, __devexit_p, __devinitdata, __devinitconst, and
> __devexit are no longer needed since CONFIG_HOTPLUG is being removed as
> an option.
>
> Note, there are some devinit compiler section mismatch warnings due to
> this series, but they are fixed up when merged with my driver-next
> branch, which fixes the PCI device id warnings, and removes the modpost
> detection, as it's no longer needed.
>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ----------------------------------------------------------------
> Bill Pemberton (18):
> rfkill: remove __dev* attributes
> wireless: remove __dev* attributes
> ath5k: remove __dev* attributes
> atmel: remove __dev* attributes
> b43: remove __dev* attributes
> brcm80211: remove __dev* attributes
> ipw2x00: remove __dev* attributes
> iwlegacy: remove __dev* attributes
> iwlwifi: remove __dev* attributes
> libertas: remove __dev* attributes
> mwl8k: remove __dev* attributes
> orinoco: remove __dev* attributes
> p54: remove __dev* attributes
> rt2x00: remove __dev* attributes
> rtl8187: remove __dev* attributes
> rtl8187: remove __dev* attributes
> wlcore/wl18xx/wl12xx: remove __dev* attributes
> rtlwifi: remove __dev* attributes
>
> drivers/net/wireless/adm8211.c | 6 +++---
> drivers/net/wireless/airo.c | 6 +++---
> drivers/net/wireless/ath/ath5k/base.c | 4 ++--
> drivers/net/wireless/ath/ath5k/led.c | 2 +-
> drivers/net/wireless/ath/ath5k/pci.c | 6 +++---
> drivers/net/wireless/atmel_pci.c | 6 +++---
> drivers/net/wireless/b43/pcmcia.c | 6 +++---
> drivers/net/wireless/b43/sdio.c | 6 +++---
> drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 4 ++--
> drivers/net/wireless/ipw2x00/ipw2100.c | 4 ++--
> drivers/net/wireless/ipw2x00/ipw2200.c | 8 ++++----
> drivers/net/wireless/iwlegacy/3945-mac.c | 4 ++--
> drivers/net/wireless/iwlegacy/4965-mac.c | 4 ++--
> drivers/net/wireless/iwlwifi/pcie/drv.c | 4 ++--
> drivers/net/wireless/libertas/if_spi.c | 6 +++---
> drivers/net/wireless/mwl8k.c | 12 ++++++------
> drivers/net/wireless/orinoco/orinoco_nortel.c | 4 ++--
> drivers/net/wireless/orinoco/orinoco_pci.c | 4 ++--
> drivers/net/wireless/orinoco/orinoco_plx.c | 4 ++--
> drivers/net/wireless/orinoco/orinoco_tmd.c | 4 ++--
> drivers/net/wireless/p54/p54pci.c | 6 +++---
> drivers/net/wireless/p54/p54spi.c | 6 +++---
> drivers/net/wireless/p54/p54usb.c | 6 +++---
> drivers/net/wireless/rt2x00/rt2400pci.c | 2 +-
> drivers/net/wireless/rt2x00/rt2500pci.c | 2 +-
> drivers/net/wireless/rt2x00/rt2800pci.c | 4 ++--
> drivers/net/wireless/rt2x00/rt61pci.c | 2 +-
> drivers/net/wireless/rtl818x/rtl8180/dev.c | 6 +++---
> drivers/net/wireless/rtl818x/rtl8187/dev.c | 6 +++---
> drivers/net/wireless/rtlwifi/pci.c | 2 +-
> drivers/net/wireless/rtlwifi/pci.h | 2 +-
> drivers/net/wireless/rtlwifi/rtl8192de/sw.c | 2 +-
> drivers/net/wireless/rtlwifi/rtl8192se/sw.c | 2 +-
> drivers/net/wireless/rtlwifi/usb.c | 2 +-
> drivers/net/wireless/rtlwifi/usb.h | 2 +-
> drivers/net/wireless/ti/wl1251/sdio.c | 4 ++--
> drivers/net/wireless/ti/wl1251/spi.c | 6 +++---
> drivers/net/wireless/ti/wl12xx/main.c | 6 +++---
> drivers/net/wireless/ti/wl18xx/main.c | 6 +++---
> drivers/net/wireless/ti/wlcore/main.c | 4 ++--
> drivers/net/wireless/ti/wlcore/sdio.c | 8 ++++----
> drivers/net/wireless/ti/wlcore/spi.c | 6 +++---
> drivers/net/wireless/ti/wlcore/wlcore.h | 4 ++--
> net/rfkill/rfkill-gpio.c | 2 +-
> net/rfkill/rfkill-regulator.c | 6 +++---
> 45 files changed, 104 insertions(+), 104 deletions(-)
>
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
WARNING: multiple messages have this Message-ID (diff)
From: "John W. Linville" <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
To: Greg KH <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Bill Pemberton <wfp5p-4Ng6DfrEGID2fBVCVOL8/A@public.gmane.org>
Subject: Re: [GIT PULL] Remove __dev* markings from the networking drivers
Date: Thu, 6 Dec 2012 15:11:35 -0500 [thread overview]
Message-ID: <20121206201135.GA2246@tuxdriver.com> (raw)
In-Reply-To: <20121203202910.GB29451-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
I went ahead and applied these as patches, since they were based on
something other than wireless-next. I hope that's OK!
John
On Mon, Dec 03, 2012 at 12:29:10PM -0800, Greg KH wrote:
> Hi John,
>
> Here's a pull request for all of Bill's __dev* removal patches for the
> wireless networking drivers, based on net-next. If you want this
> rebased on a different tree, or sent as patches (it's only 18 of them),
> please let me know.
>
> thanks,
>
> greg k-h
>
> -------------
>
> The following changes since commit 60e476d02129acb1f863a9b4932358678ee6a355:
>
> bna: remove useless calls to memset(). (2012-12-02 20:32:56 -0500)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/net-next.git tags/dev_removal_wireless
>
> for you to fetch changes up to 40ccc6ab03053a2ad1f52c8b3f4d3ee828b7c013:
>
> rtlwifi: remove __dev* attributes (2012-12-03 11:47:38 -0800)
>
> ----------------------------------------------------------------
> Wireless: Remove __dev* markings from the wireless drivers
>
> This is a series of patches that remove the dev* attributes for all
> wireless drivers.
>
> Use of __devinit, __devexit_p, __devinitdata, __devinitconst, and
> __devexit are no longer needed since CONFIG_HOTPLUG is being removed as
> an option.
>
> Note, there are some devinit compiler section mismatch warnings due to
> this series, but they are fixed up when merged with my driver-next
> branch, which fixes the PCI device id warnings, and removes the modpost
> detection, as it's no longer needed.
>
> Signed-off-by: Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
>
> ----------------------------------------------------------------
> Bill Pemberton (18):
> rfkill: remove __dev* attributes
> wireless: remove __dev* attributes
> ath5k: remove __dev* attributes
> atmel: remove __dev* attributes
> b43: remove __dev* attributes
> brcm80211: remove __dev* attributes
> ipw2x00: remove __dev* attributes
> iwlegacy: remove __dev* attributes
> iwlwifi: remove __dev* attributes
> libertas: remove __dev* attributes
> mwl8k: remove __dev* attributes
> orinoco: remove __dev* attributes
> p54: remove __dev* attributes
> rt2x00: remove __dev* attributes
> rtl8187: remove __dev* attributes
> rtl8187: remove __dev* attributes
> wlcore/wl18xx/wl12xx: remove __dev* attributes
> rtlwifi: remove __dev* attributes
>
> drivers/net/wireless/adm8211.c | 6 +++---
> drivers/net/wireless/airo.c | 6 +++---
> drivers/net/wireless/ath/ath5k/base.c | 4 ++--
> drivers/net/wireless/ath/ath5k/led.c | 2 +-
> drivers/net/wireless/ath/ath5k/pci.c | 6 +++---
> drivers/net/wireless/atmel_pci.c | 6 +++---
> drivers/net/wireless/b43/pcmcia.c | 6 +++---
> drivers/net/wireless/b43/sdio.c | 6 +++---
> drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 4 ++--
> drivers/net/wireless/ipw2x00/ipw2100.c | 4 ++--
> drivers/net/wireless/ipw2x00/ipw2200.c | 8 ++++----
> drivers/net/wireless/iwlegacy/3945-mac.c | 4 ++--
> drivers/net/wireless/iwlegacy/4965-mac.c | 4 ++--
> drivers/net/wireless/iwlwifi/pcie/drv.c | 4 ++--
> drivers/net/wireless/libertas/if_spi.c | 6 +++---
> drivers/net/wireless/mwl8k.c | 12 ++++++------
> drivers/net/wireless/orinoco/orinoco_nortel.c | 4 ++--
> drivers/net/wireless/orinoco/orinoco_pci.c | 4 ++--
> drivers/net/wireless/orinoco/orinoco_plx.c | 4 ++--
> drivers/net/wireless/orinoco/orinoco_tmd.c | 4 ++--
> drivers/net/wireless/p54/p54pci.c | 6 +++---
> drivers/net/wireless/p54/p54spi.c | 6 +++---
> drivers/net/wireless/p54/p54usb.c | 6 +++---
> drivers/net/wireless/rt2x00/rt2400pci.c | 2 +-
> drivers/net/wireless/rt2x00/rt2500pci.c | 2 +-
> drivers/net/wireless/rt2x00/rt2800pci.c | 4 ++--
> drivers/net/wireless/rt2x00/rt61pci.c | 2 +-
> drivers/net/wireless/rtl818x/rtl8180/dev.c | 6 +++---
> drivers/net/wireless/rtl818x/rtl8187/dev.c | 6 +++---
> drivers/net/wireless/rtlwifi/pci.c | 2 +-
> drivers/net/wireless/rtlwifi/pci.h | 2 +-
> drivers/net/wireless/rtlwifi/rtl8192de/sw.c | 2 +-
> drivers/net/wireless/rtlwifi/rtl8192se/sw.c | 2 +-
> drivers/net/wireless/rtlwifi/usb.c | 2 +-
> drivers/net/wireless/rtlwifi/usb.h | 2 +-
> drivers/net/wireless/ti/wl1251/sdio.c | 4 ++--
> drivers/net/wireless/ti/wl1251/spi.c | 6 +++---
> drivers/net/wireless/ti/wl12xx/main.c | 6 +++---
> drivers/net/wireless/ti/wl18xx/main.c | 6 +++---
> drivers/net/wireless/ti/wlcore/main.c | 4 ++--
> drivers/net/wireless/ti/wlcore/sdio.c | 8 ++++----
> drivers/net/wireless/ti/wlcore/spi.c | 6 +++---
> drivers/net/wireless/ti/wlcore/wlcore.h | 4 ++--
> net/rfkill/rfkill-gpio.c | 2 +-
> net/rfkill/rfkill-regulator.c | 6 +++---
> 45 files changed, 104 insertions(+), 104 deletions(-)
>
--
John W. Linville Someday the world will need a hero, and you
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org might be all we have. Be ready.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-12-06 20:16 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-03 20:29 [GIT PULL] Remove __dev* markings from the networking drivers Greg KH
2012-12-03 20:29 ` Greg KH
2012-12-06 20:11 ` John W. Linville [this message]
2012-12-06 20:11 ` John W. Linville
2012-12-06 20:23 ` Greg KH
-- strict thread matches above, loose matches on Subject: below --
2012-12-03 20:27 Greg KH
2012-12-03 20:36 ` David Miller
2012-12-04 18:17 ` David Miller
2012-12-04 20:30 ` Greg KH
2012-12-04 21:02 ` David Miller
2012-12-06 2:48 ` Greg KH
2012-12-06 2:51 ` David Miller
2012-12-06 2:52 ` David Miller
2012-12-06 2:56 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121206201135.GA2246@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=wfp5p@virginia.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.