Re: [PATCH v5 2/3] sta2x11_vip: convert to videobuf2 and control framework

[Hans Verkuil <hansverk@cisco.com>]

On Thu 10 January 2013 13:57:19 Federico Vaga wrote:
> @Hans: here the output of v4l2-compliance that you request me for the v4 
> version. This is done on the v5 version where I applied your suggestion. I 
> have 1 warning but I don't understand where is the problem

To see the warning you need to run v4l2-compliance with the '-v1' option.

Hmm, I think I should probably change v4l2-compliance to show warnings by default
and add an option that surpresses warnings. That might work better.

Regards,

	Hans

> 
> Driver Info:
> 	Driver name   : sta2x11_vip
> 	Card type     : sta2x11_vip
> 	Bus info      : PCI:0000:06:00.0
> 	Driver version: 3.6.0
> 	Capabilities  : 0x85000001
> 		Video Capture
> 		Read/Write
> 		Streaming
> 		Device Capabilities
> 	Device Caps   : 0x05000001
> 		Video Capture
> 		Read/Write
> 		Streaming
> 
> Compliance test for device /dev/video0 (not using libv4l2):
> 
> Required ioctls:
> 	test VIDIOC_QUERYCAP: OK
> 
> Allow for multiple opens:
> 	test second video open: OK
> 	test VIDIOC_QUERYCAP: OK
> 	test VIDIOC_G/S_PRIORITY: OK
> 
> Debug ioctls:
> 	test VIDIOC_DBG_G_CHIP_IDENT: Not Supported
> 	test VIDIOC_DBG_G/S_REGISTER: Not Supported
> 	test VIDIOC_LOG_STATUS: OK
> 
> Input ioctls:
> 	test VIDIOC_G/S_TUNER: Not Supported
> 	test VIDIOC_G/S_FREQUENCY: Not Supported
> 	test VIDIOC_S_HW_FREQ_SEEK: OK
> 	test VIDIOC_ENUMAUDIO: Not Supported
> 	test VIDIOC_G/S/ENUMINPUT: OK
> 	test VIDIOC_G/S_AUDIO: Not Supported
> 	Inputs: 2 Audio Inputs: 0 Tuners: 0
> 
> Output ioctls:
> 	test VIDIOC_G/S_MODULATOR: Not Supported
> 	test VIDIOC_G/S_FREQUENCY: Not Supported
> 	test VIDIOC_ENUMAUDOUT: Not Supported
> 	test VIDIOC_G/S/ENUMOUTPUT: Not Supported
> 	test VIDIOC_G/S_AUDOUT: Not Supported
> 	Outputs: 0 Audio Outputs: 0 Modulators: 0
> 
> Control ioctls:
> 	test VIDIOC_QUERYCTRL/MENU: OK
> 	test VIDIOC_G/S_CTRL: OK
> 	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> 	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> 	test VIDIOC_G/S_JPEGCOMP: Not Supported
> 	Standard Controls: 5 Private Controls: 0
> 
> Input/Output configuration ioctls:
> 	test VIDIOC_ENUM/G/S/QUERY_STD: OK
> 	test VIDIOC_ENUM/G/S/QUERY_DV_PRESETS: Not Supported
> 	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: Not Supported
> 	test VIDIOC_DV_TIMINGS_CAP: Not Supported
> 
> Format ioctls:
> 	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> 	test VIDIOC_G/S_PARM: OK
> 	test VIDIOC_G_FBUF: Not Supported
> 	test VIDIOC_G_FMT: OK
> 	test VIDIOC_TRY_FMT: OK
> 	test VIDIOC_S_FMT: OK
> 	test VIDIOC_G_SLICED_VBI_CAP: Not Supported
> 
> Buffer ioctls:
> 	test VIDIOC_REQBUFS/CREATE_BUFS: OK
> 	test read/write: OK
> 
> Total: 36, Succeeded: 36, Failed: 0, Warnings: 1
> 
> 
>