From: Cyrill Gorcunov <gorcunov@gmail.com>
To: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org, luto@amacapital.net,
gorcunov@openvz.org, xemul@parallels.com,
akpm@linux-foundation.org, mpm@selenic.com,
xiaoguangrong@linux.vnet.ibm.com, mtosatti@redhat.com,
kosaki.motohiro@gmail.com, sfr@canb.auug.org.au,
peterz@infradead.org, aneesh.kumar@linux.vnet.ibm.com
Subject: [patch 2/2] [PATCH] mm: Save soft-dirty bits on file pages
Date: Wed, 31 Jul 2013 00:41:56 +0400 [thread overview]
Message-ID: <20130730204654.966378702@gmail.com> (raw)
In-Reply-To: 20130730204154.407090410@gmail.com
[-- Attachment #1: pte-sft-dirty-file-2 --]
[-- Type: text/plain, Size: 9938 bytes --]
Andy reported that if file page get reclaimed we loose soft-dirty bit
if it was there, so save _PAGE_BIT_SOFT_DIRTY bit when page address
get encoded into pte entry. Thus when #pf happens on such non-present
pte we can restore it back.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
---
arch/x86/include/asm/pgtable-2level.h | 48 +++++++++++++++++++++++++++++++++-
arch/x86/include/asm/pgtable-3level.h | 3 ++
arch/x86/include/asm/pgtable.h | 15 ++++++++++
arch/x86/include/asm/pgtable_types.h | 4 ++
fs/proc/task_mmu.c | 2 +
include/asm-generic/pgtable.h | 15 ++++++++++
mm/fremap.c | 11 +++++--
mm/memory.c | 11 +++++--
mm/rmap.c | 8 ++++-
9 files changed, 107 insertions(+), 10 deletions(-)
Index: linux-2.6.git/arch/x86/include/asm/pgtable-2level.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable-2level.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable-2level.h
@@ -55,9 +55,53 @@ static inline pmd_t native_pmdp_get_and_
#define native_pmdp_get_and_clear(xp) native_local_pmdp_get_and_clear(xp)
#endif
+#ifdef CONFIG_MEM_SOFT_DIRTY
+
+/*
+ * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE, _PAGE_BIT_SOFT_DIRTY and
+ * _PAGE_BIT_PROTNONE are taken, split up the 28 bits of offset
+ * into this range.
+ */
+#define PTE_FILE_MAX_BITS 28
+#define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1)
+#define PTE_FILE_SHIFT2 (_PAGE_BIT_FILE + 1)
+#define PTE_FILE_SHIFT3 (_PAGE_BIT_PROTNONE + 1)
+#define PTE_FILE_SHIFT4 (_PAGE_BIT_SOFT_DIRTY + 1)
+#define PTE_FILE_BITS1 (PTE_FILE_SHIFT2 - PTE_FILE_SHIFT1 - 1)
+#define PTE_FILE_BITS2 (PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1)
+#define PTE_FILE_BITS3 (PTE_FILE_SHIFT4 - PTE_FILE_SHIFT3 - 1)
+
+#define pte_to_pgoff(pte) \
+ ((((pte).pte_low >> (PTE_FILE_SHIFT1)) \
+ & ((1U << PTE_FILE_BITS1) - 1))) \
+ + ((((pte).pte_low >> (PTE_FILE_SHIFT2)) \
+ & ((1U << PTE_FILE_BITS2) - 1)) \
+ << (PTE_FILE_BITS1)) \
+ + ((((pte).pte_low >> (PTE_FILE_SHIFT3)) \
+ & ((1U << PTE_FILE_BITS3) - 1)) \
+ << (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \
+ + ((((pte).pte_low >> (PTE_FILE_SHIFT4))) \
+ << (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3))
+
+#define pgoff_to_pte(off) \
+ ((pte_t) { .pte_low = \
+ ((((off)) & ((1U << PTE_FILE_BITS1) - 1)) << PTE_FILE_SHIFT1) \
+ + ((((off) >> PTE_FILE_BITS1) \
+ & ((1U << PTE_FILE_BITS2) - 1)) \
+ << PTE_FILE_SHIFT2) \
+ + ((((off) >> (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \
+ & ((1U << PTE_FILE_BITS3) - 1)) \
+ << PTE_FILE_SHIFT3) \
+ + ((((off) >> \
+ (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3))) \
+ << PTE_FILE_SHIFT4) \
+ + _PAGE_FILE })
+
+#else /* CONFIG_MEM_SOFT_DIRTY */
+
/*
* Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE and _PAGE_BIT_PROTNONE are taken,
- * split up the 29 bits of offset into this range:
+ * split up the 29 bits of offset into this range.
*/
#define PTE_FILE_MAX_BITS 29
#define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1)
@@ -88,6 +132,8 @@ static inline pmd_t native_pmdp_get_and_
<< PTE_FILE_SHIFT3) \
+ _PAGE_FILE })
+#endif /* CONFIG_MEM_SOFT_DIRTY */
+
/* Encode and de-code a swap entry */
#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
#define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1)
Index: linux-2.6.git/arch/x86/include/asm/pgtable-3level.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable-3level.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable-3level.h
@@ -179,6 +179,9 @@ static inline pmd_t native_pmdp_get_and_
/*
* Bits 0, 6 and 7 are taken in the low part of the pte,
* put the 32 bits of offset into the high part.
+ *
+ * For soft-dirty tracking 11 bit is taken from
+ * the low part of pte as well.
*/
#define pte_to_pgoff(pte) ((pte).pte_high)
#define pgoff_to_pte(off) \
Index: linux-2.6.git/arch/x86/include/asm/pgtable.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable.h
@@ -329,6 +329,21 @@ static inline pte_t pte_swp_clear_soft_d
return pte_clear_flags(pte, _PAGE_SWP_SOFT_DIRTY);
}
+static inline pte_t pte_file_clear_soft_dirty(pte_t pte)
+{
+ return pte_clear_flags(pte, _PAGE_SOFT_DIRTY);
+}
+
+static inline pte_t pte_file_mksoft_dirty(pte_t pte)
+{
+ return pte_set_flags(pte, _PAGE_SOFT_DIRTY);
+}
+
+static inline int pte_file_soft_dirty(pte_t pte)
+{
+ return pte_flags(pte) & _PAGE_SOFT_DIRTY;
+}
+
/*
* Mask out unsupported bits in a present pgprot. Non-present pgprots
* can use those bits for other purposes, so leave them be.
Index: linux-2.6.git/arch/x86/include/asm/pgtable_types.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable_types.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable_types.h
@@ -61,8 +61,10 @@
* they do not conflict with each other.
*/
+#define _PAGE_BIT_SOFT_DIRTY _PAGE_BIT_HIDDEN
+
#ifdef CONFIG_MEM_SOFT_DIRTY
-#define _PAGE_SOFT_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)
+#define _PAGE_SOFT_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_SOFT_DIRTY)
#else
#define _PAGE_SOFT_DIRTY (_AT(pteval_t, 0))
#endif
Index: linux-2.6.git/fs/proc/task_mmu.c
===================================================================
--- linux-2.6.git.orig/fs/proc/task_mmu.c
+++ linux-2.6.git/fs/proc/task_mmu.c
@@ -736,6 +736,8 @@ static inline void clear_soft_dirty(stru
ptent = pte_clear_flags(ptent, _PAGE_SOFT_DIRTY);
} else if (is_swap_pte(ptent)) {
ptent = pte_swp_clear_soft_dirty(ptent);
+ } else if (pte_file(ptent)) {
+ ptent = pte_file_clear_soft_dirty(ptent);
}
set_pte_at(vma->vm_mm, addr, pte, ptent);
Index: linux-2.6.git/include/asm-generic/pgtable.h
===================================================================
--- linux-2.6.git.orig/include/asm-generic/pgtable.h
+++ linux-2.6.git/include/asm-generic/pgtable.h
@@ -432,6 +432,21 @@ static inline pte_t pte_swp_clear_soft_d
{
return pte;
}
+
+static inline pte_t pte_file_clear_soft_dirty(pte_t pte)
+{
+ return pte;
+}
+
+static inline pte_t pte_file_mksoft_dirty(pte_t pte)
+{
+ return pte;
+}
+
+static inline int pte_file_soft_dirty(pte_t pte)
+{
+ return 0;
+}
#endif
#ifndef __HAVE_PFNMAP_TRACKING
Index: linux-2.6.git/mm/fremap.c
===================================================================
--- linux-2.6.git.orig/mm/fremap.c
+++ linux-2.6.git/mm/fremap.c
@@ -57,17 +57,22 @@ static int install_file_pte(struct mm_st
unsigned long addr, unsigned long pgoff, pgprot_t prot)
{
int err = -ENOMEM;
- pte_t *pte;
+ pte_t *pte, ptfile;
spinlock_t *ptl;
pte = get_locked_pte(mm, addr, &ptl);
if (!pte)
goto out;
- if (!pte_none(*pte))
+ ptfile = pgoff_to_pte(pgoff);
+
+ if (!pte_none(*pte)) {
+ if (pte_present(*pte) && pte_soft_dirty(*pte))
+ pte_file_mksoft_dirty(ptfile);
zap_pte(mm, vma, addr, pte);
+ }
- set_pte_at(mm, addr, pte, pgoff_to_pte(pgoff));
+ set_pte_at(mm, addr, pte, ptfile);
/*
* We don't need to run update_mmu_cache() here because the "file pte"
* being installed by install_file_pte() is not a real pte - it's a
Index: linux-2.6.git/mm/memory.c
===================================================================
--- linux-2.6.git.orig/mm/memory.c
+++ linux-2.6.git/mm/memory.c
@@ -1141,9 +1141,12 @@ again:
continue;
if (unlikely(details) && details->nonlinear_vma
&& linear_page_index(details->nonlinear_vma,
- addr) != page->index)
- set_pte_at(mm, addr, pte,
- pgoff_to_pte(page->index));
+ addr) != page->index) {
+ pte_t ptfile = pgoff_to_pte(page->index);
+ if (pte_soft_dirty(ptent))
+ pte_file_mksoft_dirty(ptfile);
+ set_pte_at(mm, addr, pte, ptfile);
+ }
if (PageAnon(page))
rss[MM_ANONPAGES]--;
else {
@@ -3410,6 +3413,8 @@ static int __do_fault(struct mm_struct *
entry = mk_pte(page, vma->vm_page_prot);
if (flags & FAULT_FLAG_WRITE)
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
+ else if (pte_file(orig_pte) && pte_file_soft_dirty(orig_pte))
+ pte_mksoft_dirty(entry);
if (anon) {
inc_mm_counter_fast(mm, MM_ANONPAGES);
page_add_new_anon_rmap(page, vma, address);
Index: linux-2.6.git/mm/rmap.c
===================================================================
--- linux-2.6.git.orig/mm/rmap.c
+++ linux-2.6.git/mm/rmap.c
@@ -1405,8 +1405,12 @@ static int try_to_unmap_cluster(unsigned
pteval = ptep_clear_flush(vma, address, pte);
/* If nonlinear, store the file page offset in the pte. */
- if (page->index != linear_page_index(vma, address))
- set_pte_at(mm, address, pte, pgoff_to_pte(page->index));
+ if (page->index != linear_page_index(vma, address)) {
+ pte_t ptfile = pgoff_to_pte(page->index);
+ if (pte_soft_dirty(pteval))
+ pte_file_mksoft_dirty(ptfile);
+ set_pte_at(mm, address, pte, ptfile);
+ }
/* Move the dirty bit to the physical page now the pte is gone. */
if (pte_dirty(pteval))
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: Cyrill Gorcunov <gorcunov@gmail.com>
To: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org, luto@amacapital.net,
gorcunov@openvz.org, xemul@parallels.com,
akpm@linux-foundation.org, mpm@selenic.com,
xiaoguangrong@linux.vnet.ibm.com, mtosatti@redhat.com,
kosaki.motohiro@gmail.com, sfr@canb.auug.org.au,
peterz@infradead.org, aneesh.kumar@linux.vnet.ibm.com
Subject: [patch 2/2] [PATCH] mm: Save soft-dirty bits on file pages
Date: Wed, 31 Jul 2013 00:41:56 +0400 [thread overview]
Message-ID: <20130730204654.966378702@gmail.com> (raw)
In-Reply-To: 20130730204154.407090410@gmail.com
[-- Attachment #1: pte-sft-dirty-file-2 --]
[-- Type: text/plain, Size: 9713 bytes --]
Andy reported that if file page get reclaimed we loose soft-dirty bit
if it was there, so save _PAGE_BIT_SOFT_DIRTY bit when page address
get encoded into pte entry. Thus when #pf happens on such non-present
pte we can restore it back.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
---
arch/x86/include/asm/pgtable-2level.h | 48 +++++++++++++++++++++++++++++++++-
arch/x86/include/asm/pgtable-3level.h | 3 ++
arch/x86/include/asm/pgtable.h | 15 ++++++++++
arch/x86/include/asm/pgtable_types.h | 4 ++
fs/proc/task_mmu.c | 2 +
include/asm-generic/pgtable.h | 15 ++++++++++
mm/fremap.c | 11 +++++--
mm/memory.c | 11 +++++--
mm/rmap.c | 8 ++++-
9 files changed, 107 insertions(+), 10 deletions(-)
Index: linux-2.6.git/arch/x86/include/asm/pgtable-2level.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable-2level.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable-2level.h
@@ -55,9 +55,53 @@ static inline pmd_t native_pmdp_get_and_
#define native_pmdp_get_and_clear(xp) native_local_pmdp_get_and_clear(xp)
#endif
+#ifdef CONFIG_MEM_SOFT_DIRTY
+
+/*
+ * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE, _PAGE_BIT_SOFT_DIRTY and
+ * _PAGE_BIT_PROTNONE are taken, split up the 28 bits of offset
+ * into this range.
+ */
+#define PTE_FILE_MAX_BITS 28
+#define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1)
+#define PTE_FILE_SHIFT2 (_PAGE_BIT_FILE + 1)
+#define PTE_FILE_SHIFT3 (_PAGE_BIT_PROTNONE + 1)
+#define PTE_FILE_SHIFT4 (_PAGE_BIT_SOFT_DIRTY + 1)
+#define PTE_FILE_BITS1 (PTE_FILE_SHIFT2 - PTE_FILE_SHIFT1 - 1)
+#define PTE_FILE_BITS2 (PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1)
+#define PTE_FILE_BITS3 (PTE_FILE_SHIFT4 - PTE_FILE_SHIFT3 - 1)
+
+#define pte_to_pgoff(pte) \
+ ((((pte).pte_low >> (PTE_FILE_SHIFT1)) \
+ & ((1U << PTE_FILE_BITS1) - 1))) \
+ + ((((pte).pte_low >> (PTE_FILE_SHIFT2)) \
+ & ((1U << PTE_FILE_BITS2) - 1)) \
+ << (PTE_FILE_BITS1)) \
+ + ((((pte).pte_low >> (PTE_FILE_SHIFT3)) \
+ & ((1U << PTE_FILE_BITS3) - 1)) \
+ << (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \
+ + ((((pte).pte_low >> (PTE_FILE_SHIFT4))) \
+ << (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3))
+
+#define pgoff_to_pte(off) \
+ ((pte_t) { .pte_low = \
+ ((((off)) & ((1U << PTE_FILE_BITS1) - 1)) << PTE_FILE_SHIFT1) \
+ + ((((off) >> PTE_FILE_BITS1) \
+ & ((1U << PTE_FILE_BITS2) - 1)) \
+ << PTE_FILE_SHIFT2) \
+ + ((((off) >> (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \
+ & ((1U << PTE_FILE_BITS3) - 1)) \
+ << PTE_FILE_SHIFT3) \
+ + ((((off) >> \
+ (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3))) \
+ << PTE_FILE_SHIFT4) \
+ + _PAGE_FILE })
+
+#else /* CONFIG_MEM_SOFT_DIRTY */
+
/*
* Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE and _PAGE_BIT_PROTNONE are taken,
- * split up the 29 bits of offset into this range:
+ * split up the 29 bits of offset into this range.
*/
#define PTE_FILE_MAX_BITS 29
#define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1)
@@ -88,6 +132,8 @@ static inline pmd_t native_pmdp_get_and_
<< PTE_FILE_SHIFT3) \
+ _PAGE_FILE })
+#endif /* CONFIG_MEM_SOFT_DIRTY */
+
/* Encode and de-code a swap entry */
#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
#define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1)
Index: linux-2.6.git/arch/x86/include/asm/pgtable-3level.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable-3level.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable-3level.h
@@ -179,6 +179,9 @@ static inline pmd_t native_pmdp_get_and_
/*
* Bits 0, 6 and 7 are taken in the low part of the pte,
* put the 32 bits of offset into the high part.
+ *
+ * For soft-dirty tracking 11 bit is taken from
+ * the low part of pte as well.
*/
#define pte_to_pgoff(pte) ((pte).pte_high)
#define pgoff_to_pte(off) \
Index: linux-2.6.git/arch/x86/include/asm/pgtable.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable.h
@@ -329,6 +329,21 @@ static inline pte_t pte_swp_clear_soft_d
return pte_clear_flags(pte, _PAGE_SWP_SOFT_DIRTY);
}
+static inline pte_t pte_file_clear_soft_dirty(pte_t pte)
+{
+ return pte_clear_flags(pte, _PAGE_SOFT_DIRTY);
+}
+
+static inline pte_t pte_file_mksoft_dirty(pte_t pte)
+{
+ return pte_set_flags(pte, _PAGE_SOFT_DIRTY);
+}
+
+static inline int pte_file_soft_dirty(pte_t pte)
+{
+ return pte_flags(pte) & _PAGE_SOFT_DIRTY;
+}
+
/*
* Mask out unsupported bits in a present pgprot. Non-present pgprots
* can use those bits for other purposes, so leave them be.
Index: linux-2.6.git/arch/x86/include/asm/pgtable_types.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable_types.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable_types.h
@@ -61,8 +61,10 @@
* they do not conflict with each other.
*/
+#define _PAGE_BIT_SOFT_DIRTY _PAGE_BIT_HIDDEN
+
#ifdef CONFIG_MEM_SOFT_DIRTY
-#define _PAGE_SOFT_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)
+#define _PAGE_SOFT_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_SOFT_DIRTY)
#else
#define _PAGE_SOFT_DIRTY (_AT(pteval_t, 0))
#endif
Index: linux-2.6.git/fs/proc/task_mmu.c
===================================================================
--- linux-2.6.git.orig/fs/proc/task_mmu.c
+++ linux-2.6.git/fs/proc/task_mmu.c
@@ -736,6 +736,8 @@ static inline void clear_soft_dirty(stru
ptent = pte_clear_flags(ptent, _PAGE_SOFT_DIRTY);
} else if (is_swap_pte(ptent)) {
ptent = pte_swp_clear_soft_dirty(ptent);
+ } else if (pte_file(ptent)) {
+ ptent = pte_file_clear_soft_dirty(ptent);
}
set_pte_at(vma->vm_mm, addr, pte, ptent);
Index: linux-2.6.git/include/asm-generic/pgtable.h
===================================================================
--- linux-2.6.git.orig/include/asm-generic/pgtable.h
+++ linux-2.6.git/include/asm-generic/pgtable.h
@@ -432,6 +432,21 @@ static inline pte_t pte_swp_clear_soft_d
{
return pte;
}
+
+static inline pte_t pte_file_clear_soft_dirty(pte_t pte)
+{
+ return pte;
+}
+
+static inline pte_t pte_file_mksoft_dirty(pte_t pte)
+{
+ return pte;
+}
+
+static inline int pte_file_soft_dirty(pte_t pte)
+{
+ return 0;
+}
#endif
#ifndef __HAVE_PFNMAP_TRACKING
Index: linux-2.6.git/mm/fremap.c
===================================================================
--- linux-2.6.git.orig/mm/fremap.c
+++ linux-2.6.git/mm/fremap.c
@@ -57,17 +57,22 @@ static int install_file_pte(struct mm_st
unsigned long addr, unsigned long pgoff, pgprot_t prot)
{
int err = -ENOMEM;
- pte_t *pte;
+ pte_t *pte, ptfile;
spinlock_t *ptl;
pte = get_locked_pte(mm, addr, &ptl);
if (!pte)
goto out;
- if (!pte_none(*pte))
+ ptfile = pgoff_to_pte(pgoff);
+
+ if (!pte_none(*pte)) {
+ if (pte_present(*pte) && pte_soft_dirty(*pte))
+ pte_file_mksoft_dirty(ptfile);
zap_pte(mm, vma, addr, pte);
+ }
- set_pte_at(mm, addr, pte, pgoff_to_pte(pgoff));
+ set_pte_at(mm, addr, pte, ptfile);
/*
* We don't need to run update_mmu_cache() here because the "file pte"
* being installed by install_file_pte() is not a real pte - it's a
Index: linux-2.6.git/mm/memory.c
===================================================================
--- linux-2.6.git.orig/mm/memory.c
+++ linux-2.6.git/mm/memory.c
@@ -1141,9 +1141,12 @@ again:
continue;
if (unlikely(details) && details->nonlinear_vma
&& linear_page_index(details->nonlinear_vma,
- addr) != page->index)
- set_pte_at(mm, addr, pte,
- pgoff_to_pte(page->index));
+ addr) != page->index) {
+ pte_t ptfile = pgoff_to_pte(page->index);
+ if (pte_soft_dirty(ptent))
+ pte_file_mksoft_dirty(ptfile);
+ set_pte_at(mm, addr, pte, ptfile);
+ }
if (PageAnon(page))
rss[MM_ANONPAGES]--;
else {
@@ -3410,6 +3413,8 @@ static int __do_fault(struct mm_struct *
entry = mk_pte(page, vma->vm_page_prot);
if (flags & FAULT_FLAG_WRITE)
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
+ else if (pte_file(orig_pte) && pte_file_soft_dirty(orig_pte))
+ pte_mksoft_dirty(entry);
if (anon) {
inc_mm_counter_fast(mm, MM_ANONPAGES);
page_add_new_anon_rmap(page, vma, address);
Index: linux-2.6.git/mm/rmap.c
===================================================================
--- linux-2.6.git.orig/mm/rmap.c
+++ linux-2.6.git/mm/rmap.c
@@ -1405,8 +1405,12 @@ static int try_to_unmap_cluster(unsigned
pteval = ptep_clear_flush(vma, address, pte);
/* If nonlinear, store the file page offset in the pte. */
- if (page->index != linear_page_index(vma, address))
- set_pte_at(mm, address, pte, pgoff_to_pte(page->index));
+ if (page->index != linear_page_index(vma, address)) {
+ pte_t ptfile = pgoff_to_pte(page->index);
+ if (pte_soft_dirty(pteval))
+ pte_file_mksoft_dirty(ptfile);
+ set_pte_at(mm, address, pte, ptfile);
+ }
/* Move the dirty bit to the physical page now the pte is gone. */
if (pte_dirty(pteval))
next prev parent reply other threads:[~2013-07-30 20:46 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-30 20:41 [patch 0/2] Soft-dirty page tracker improvemens Cyrill Gorcunov
2013-07-30 20:41 ` Cyrill Gorcunov
2013-07-30 20:41 ` [patch 1/2] [PATCH] mm: Save soft-dirty bits on swapped pages Cyrill Gorcunov
2013-07-30 20:41 ` Cyrill Gorcunov
2013-07-31 8:16 ` Pavel Emelyanov
2013-07-31 8:16 ` Pavel Emelyanov
2013-08-01 0:51 ` Minchan Kim
2013-08-01 0:51 ` Minchan Kim
2013-08-01 5:53 ` Cyrill Gorcunov
2013-08-01 5:53 ` Cyrill Gorcunov
2013-08-01 6:16 ` Minchan Kim
2013-08-01 6:16 ` Minchan Kim
2013-08-01 6:28 ` Cyrill Gorcunov
2013-08-01 6:28 ` Cyrill Gorcunov
2013-08-01 6:37 ` Minchan Kim
2013-08-01 6:37 ` Minchan Kim
2013-08-01 6:38 ` Cyrill Gorcunov
2013-08-01 6:38 ` Cyrill Gorcunov
2013-08-05 1:48 ` Wanpeng Li
2013-08-05 1:48 ` Wanpeng Li
[not found] ` <51ff047d.2768310a.2fc4.340fSMTPIN_ADDED_BROKEN@mx.google.com>
2013-08-05 2:17 ` Minchan Kim
2013-08-05 2:17 ` Minchan Kim
2013-08-05 2:38 ` Wanpeng Li
2013-08-05 2:38 ` Wanpeng Li
[not found] ` <51ff1053.ab47310a.5d3f.566cSMTPIN_ADDED_BROKEN@mx.google.com>
2013-08-05 2:54 ` Minchan Kim
2013-08-05 2:54 ` Minchan Kim
2013-08-05 2:58 ` Wanpeng Li
2013-08-05 2:58 ` Wanpeng Li
[not found] ` <51ff14e9.87ef440a.1424.ffffe470SMTPIN_ADDED_BROKEN@mx.google.com>
2013-08-05 5:43 ` Cyrill Gorcunov
2013-08-05 5:43 ` Cyrill Gorcunov
2013-08-07 20:21 ` Andrew Morton
2013-08-07 20:21 ` Andrew Morton
2013-08-07 20:29 ` Cyrill Gorcunov
2013-08-07 20:29 ` Cyrill Gorcunov
2013-08-10 17:48 ` James Bottomley
2013-08-10 17:48 ` James Bottomley
2013-07-30 20:41 ` Cyrill Gorcunov [this message]
2013-07-30 20:41 ` [patch 2/2] [PATCH] mm: Save soft-dirty bits on file pages Cyrill Gorcunov
2013-07-31 8:16 ` Pavel Emelyanov
2013-07-31 8:16 ` Pavel Emelyanov
2013-08-07 20:28 ` Andrew Morton
2013-08-07 20:28 ` Andrew Morton
2013-08-07 20:31 ` Cyrill Gorcunov
2013-08-07 20:31 ` Cyrill Gorcunov
2013-08-08 14:51 ` Cyrill Gorcunov
2013-08-12 21:57 ` Andrew Morton
2013-08-12 21:57 ` Andrew Morton
2013-08-12 22:28 ` Andy Lutomirski
2013-08-12 22:28 ` Andy Lutomirski
2013-08-12 22:37 ` Andrew Morton
2013-08-12 22:37 ` Andrew Morton
2013-08-13 5:02 ` Cyrill Gorcunov
2013-08-13 5:02 ` Cyrill Gorcunov
2013-08-13 15:14 ` H. Peter Anvin
2013-08-13 15:14 ` H. Peter Anvin
2013-08-13 15:37 ` Cyrill Gorcunov
2013-08-13 15:37 ` Cyrill Gorcunov
2013-08-13 16:43 ` H. Peter Anvin
2013-08-13 16:43 ` H. Peter Anvin
2013-08-13 21:28 ` Cyrill Gorcunov
2013-08-13 21:28 ` Cyrill Gorcunov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130730204654.966378702@gmail.com \
--to=gorcunov@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=gorcunov@openvz.org \
--cc=kosaki.motohiro@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=luto@amacapital.net \
--cc=mpm@selenic.com \
--cc=mtosatti@redhat.com \
--cc=peterz@infradead.org \
--cc=sfr@canb.auug.org.au \
--cc=xemul@parallels.com \
--cc=xiaoguangrong@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.