Re: powerpc allmodconfig build broken due to commit 15863ff3b (powerpc: Make chip-id information available to userspace)

[Guenter Roeck <linux@roeck-us.net>]

On Wed, Sep 11, 2013 at 08:02:49AM +1000, Benjamin Herrenschmidt wrote:
> On Mon, 2013-09-09 at 16:55 -0700, Asai Thambi S P wrote:
> > On 09/08/2013 5:28 PM, Guenter Roeck wrote:
> > > Hi all,
> > >
> > > powerpc allmodconfig build on the latest upstream kernel results in:
> > >
> > > ERROR: ".cpu_to_chip_id" [drivers/block/mtip32xx/mtip32xx.ko] undefined!
> > >
> > > This is due to commit 15863ff3b (powerpc: Make chip-id information 
> > > available to userspace).
> > > Not surprising, as cpu_to_chip_id() is not exported.
> > >
> > Apart from the above error, I have a concern on the patch, purely based on the commit message.
> > (to be honest, I am not familiar with the ppc architecture)
> > 
> > Commit message of 15863ff3b has the following text.
> > 
> > ******************
> > So far "/sys/devices/system/cpu/cpuX/topology/physical_package_id"
> > was always default (-1) on ppc64 architecture.
> > 
> > Now, some systems have an ibm,chip-id property in the cpu nodes in
> > the device tree. On these systems, we now use this information to
> > display physical_package_id
> > ******************
> > 
> > Shouldn't the new definition of "topology_physical_package_id" apply only to those systems supporting ibm,chip-id property?
> 
> There should be no negative side effect (appart from the missing
> EXPORT_SYMBOL of course). If the property is not found in the
> device-tree, the new function returns -1, so it should work fine on all
> systems.
> 
Good. I submitted a patch doing just that yesterday or so.
Hope you'll accept it ;).

Thanks,
Guenter