From: David Gibson <david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org>
To: Frank Rowand <frowand.list-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
Tomasz Figa <tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Benjamin Herrenschmidt
<benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux Kernel list
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Marek Szyprowski
<m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Grant Likely
<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Subject: Re: "memory" binding issues
Date: Wed, 18 Sep 2013 11:25:57 +1000 [thread overview]
Message-ID: <20130918012557.GA22725@voom.fritz.box> (raw)
In-Reply-To: <5238C4D1.6060500-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1059 bytes --]
On Tue, Sep 17, 2013 at 02:08:33PM -0700, Frank Rowand wrote:
> On 9/17/2013 9:43 AM, Olof Johansson wrote:
> > On Tue, Sep 17, 2013 at 09:56:39AM +0200, Tomasz Figa wrote:
> >> I'm afraid that I must disagree. For consistency I'd rather go with what
> >> Ben said. Please see ePAPR chapter 2.2.1.1, which clearly defines how
> >> nodes should be named.
> >
> > 2.2.1.1 is there to point out that unit address _has_ to reflect reg.
> >
> > 2.2.3 says that unit addresses can be omitted.
>
> 2.2.3 is talking about path names.
>
> 2.2.1.1 is talking about node names.
>
> 2.2.1.1 _does_ require the unit address in the node name, 2.2.3 does not
> remove that requirement.
Certainly the recommendation I've been giving from the early days of
ePAPR has been that a node should have a unit address if and only if
it has a 'reg' property.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: David Gibson <david@gibson.dropbear.id.au>
To: Frank Rowand <frowand.list@gmail.com>
Cc: Olof Johansson <olof@lixom.net>,
Tomasz Figa <tomasz.figa@gmail.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Stephen Warren <swarren@wwwdotorg.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Linux Kernel list <linux-kernel@vger.kernel.org>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Stephen Warren <swarren@nvidia.com>,
Rob Herring <rob.herring@calxeda.com>,
Grant Likely <grant.likely@secretlab.ca>
Subject: Re: "memory" binding issues
Date: Wed, 18 Sep 2013 11:25:57 +1000 [thread overview]
Message-ID: <20130918012557.GA22725@voom.fritz.box> (raw)
In-Reply-To: <5238C4D1.6060500@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1059 bytes --]
On Tue, Sep 17, 2013 at 02:08:33PM -0700, Frank Rowand wrote:
> On 9/17/2013 9:43 AM, Olof Johansson wrote:
> > On Tue, Sep 17, 2013 at 09:56:39AM +0200, Tomasz Figa wrote:
> >> I'm afraid that I must disagree. For consistency I'd rather go with what
> >> Ben said. Please see ePAPR chapter 2.2.1.1, which clearly defines how
> >> nodes should be named.
> >
> > 2.2.1.1 is there to point out that unit address _has_ to reflect reg.
> >
> > 2.2.3 says that unit addresses can be omitted.
>
> 2.2.3 is talking about path names.
>
> 2.2.1.1 is talking about node names.
>
> 2.2.1.1 _does_ require the unit address in the node name, 2.2.3 does not
> remove that requirement.
Certainly the recommendation I've been giving from the early days of
ePAPR has been that a node should have a unit address if and only if
it has a 'reg' property.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2013-09-18 1:25 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-16 2:57 "memory" binding issues Benjamin Herrenschmidt
2013-09-16 2:57 ` Benjamin Herrenschmidt
2013-09-16 15:22 ` Kumar Gala
2013-09-16 15:22 ` Kumar Gala
2013-09-16 22:42 ` Benjamin Herrenschmidt
2013-09-17 15:53 ` Kumar Gala
2013-09-17 15:53 ` Kumar Gala
2013-09-16 16:17 ` Stephen Warren
2013-09-16 16:17 ` Stephen Warren
[not found] ` <52372F2A.2050003-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-09-16 22:46 ` Benjamin Herrenschmidt
2013-09-16 22:46 ` Benjamin Herrenschmidt
2013-09-16 22:48 ` Olof Johansson
2013-09-16 22:48 ` Olof Johansson
[not found] ` <CAOesGMgE1jiF5OHsmPQz2z66Bcqu0HeAj=taE1vmFK-0-0s2TQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-09-16 23:47 ` Benjamin Herrenschmidt
2013-09-16 23:47 ` Benjamin Herrenschmidt
2013-09-16 23:48 ` Olof Johansson
[not found] ` <CAOesGMjDFOThCYPgPq5mS8-Uk5Ye=omye329EKRsb-q_akTP4Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-09-17 1:37 ` Benjamin Herrenschmidt
2013-09-17 1:37 ` Benjamin Herrenschmidt
2013-09-17 7:56 ` Tomasz Figa
2013-09-17 7:56 ` Tomasz Figa
2013-09-17 16:43 ` Olof Johansson
2013-09-17 16:43 ` Olof Johansson
[not found] ` <20130917164307.GA31327-O5ziIzlqnXUVNXGz7ipsyg@public.gmane.org>
2013-09-17 21:08 ` Frank Rowand
2013-09-17 21:08 ` Frank Rowand
[not found] ` <5238C4D1.6060500-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-09-17 21:15 ` Olof Johansson
2013-09-17 21:15 ` Olof Johansson
[not found] ` <CAOesGMh0F09OAR4bepGSCE5Z5OZ56fBmDPBSfwZ+NB9RgcE0Vw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-09-17 21:19 ` Tomasz Figa
2013-09-17 21:19 ` Tomasz Figa
2013-09-17 21:33 ` Olof Johansson
[not found] ` <CAOesGMjt6RsvYRjXxpB=v-Ro6iyUN=YzkDd1mfHqCDJJDRJvLg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-09-17 23:04 ` Benjamin Herrenschmidt
2013-09-17 23:04 ` Benjamin Herrenschmidt
2013-09-17 23:25 ` Olof Johansson
2013-09-17 23:25 ` Olof Johansson
2013-09-17 21:56 ` Benjamin Herrenschmidt
2013-09-17 21:56 ` Benjamin Herrenschmidt
2013-09-18 16:28 ` Stephen Warren
2013-09-18 16:28 ` Stephen Warren
[not found] ` <5239D4BC.3030600-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-09-19 0:29 ` David Gibson
2013-09-19 0:29 ` David Gibson
2013-09-18 1:25 ` David Gibson [this message]
2013-09-18 1:25 ` David Gibson
2013-09-18 1:31 ` Grant Likely
2013-09-18 1:31 ` Grant Likely
2013-09-18 1:38 ` Grant Likely
[not found] ` <20130918013823.D617CC42C81-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2013-09-18 8:08 ` Benjamin Herrenschmidt
2013-09-18 8:08 ` Benjamin Herrenschmidt
2013-09-18 2:57 ` Grant Likely
2013-09-18 2:57 ` Grant Likely
[not found] ` <20130918025714.A69D8C42C8F-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2013-09-18 8:21 ` Benjamin Herrenschmidt
2013-09-18 8:21 ` Benjamin Herrenschmidt
2013-09-27 15:42 ` Kumar Gala
2013-09-27 15:42 ` Kumar Gala
2013-10-03 15:04 ` Kumar Gala
-- strict thread matches above, loose matches on Subject: below --
2013-09-16 2:41 Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130918012557.GA22725@voom.fritz.box \
--to=david-xt8fgy+axnrb3ne2bgzf6laj5h9x9tb+@public.gmane.org \
--cc=benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=frowand.list-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.