All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Zhu Richard-R65037" <r65037@freescale.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	Shawn Guo <shawn.guo@linaro.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"tharvey@gateworks.com" <tharvey@gateworks.com>,
	Frank Li <lznuaa@gmail.com>, Sean Cross <xobs@kosagi.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Yinghai Lu <yinghai@kernel.org>,
	Tim Harvey <tharvey@gateworks.com>
Subject: Re: [PATCH v7 0/2] Add PCIe support for i.MX6q
Date: Fri, 11 Oct 2013 04:13:02 +0200	[thread overview]
Message-ID: <201310110413.02354.marex@denx.de> (raw)
In-Reply-To: <CAErSpo5e5ZyVqGOHR9p568k7_Qx4tBQCBjQvWvL+xGCqFLHHKQ@mail.gmail.com>

Hi Bjorn,

> On Thu, Oct 10, 2013 at 11:39 AM, Marek Vasut <marex@denx.de> wrote:
> > Hi Bjorn,
> > 
> >> [+cc Yinghai]
> >> 
> >> On Thu, Oct 10, 2013 at 9:58 AM, Marek Vasut <marex@denx.de> wrote:
> >> >> On Thu, Oct 10, 2013 at 4:25 AM, Marek Vasut <marex@denx.de> wrote:
> >> > I tried you suggestion, this is what I got now (and with V7 of the
> >> > patches):
> >> > 
> >> > Note that my topology is: rootport->2_port_switch->ethernet_chip , the
> >> > other port of the switch is not used .
> >> > 
> >> > imx6q-pcie 1ffc000.pcie: phy link never came up

After discussing with Tim a little, looks like a clock bit was missing. The 
above line was the cause of all the issues. Now I can probe the bus, but I still 
need more patches:

This dirty patch here limits the PCIe operation to GEN1 only. It's based on this 
Freescale patch [1]. Without this change, the PCIe switch is not detected. Any 
idea why? (I also had to increase the PHY startup delay to get GEN1 going).

[1] https://www.osadl.org/monitoring/patches/r8s7/1342-ENGR00180230-MX6-PCIE-
enlarge-the-eye-diagram-and-fo.patch

diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 32b30ca..df2838b 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -330,13 +330,16 @@ static void imx6_pcie_host_init(struct pcie_port *pp)
 
        dw_pcie_setup_rc(pp);
 
+// Enable GEN1
+writel(((readl(pp->dbi_base + 0x7c) & 0xfffffff0) | 0x1), pp->dbi_base + 0x7c);
+
        regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
                        IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
 
        while (!dw_pcie_link_up(pp)) {
                usleep_range(100, 1000);
                count++;
-               if (count >= 10) {
+               if (count >= 200) {
                        dev_err(pp->dev, "phy link never came up\n");
                        dev_dbg(pp->dev,
                                "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",

Best regards,
Marek Vasut

WARNING: multiple messages have this Message-ID (diff)
From: marex@denx.de (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 0/2] Add PCIe support for i.MX6q
Date: Fri, 11 Oct 2013 04:13:02 +0200	[thread overview]
Message-ID: <201310110413.02354.marex@denx.de> (raw)
In-Reply-To: <CAErSpo5e5ZyVqGOHR9p568k7_Qx4tBQCBjQvWvL+xGCqFLHHKQ@mail.gmail.com>

Hi Bjorn,

> On Thu, Oct 10, 2013 at 11:39 AM, Marek Vasut <marex@denx.de> wrote:
> > Hi Bjorn,
> > 
> >> [+cc Yinghai]
> >> 
> >> On Thu, Oct 10, 2013 at 9:58 AM, Marek Vasut <marex@denx.de> wrote:
> >> >> On Thu, Oct 10, 2013 at 4:25 AM, Marek Vasut <marex@denx.de> wrote:
> >> > I tried you suggestion, this is what I got now (and with V7 of the
> >> > patches):
> >> > 
> >> > Note that my topology is: rootport->2_port_switch->ethernet_chip , the
> >> > other port of the switch is not used .
> >> > 
> >> > imx6q-pcie 1ffc000.pcie: phy link never came up

After discussing with Tim a little, looks like a clock bit was missing. The 
above line was the cause of all the issues. Now I can probe the bus, but I still 
need more patches:

This dirty patch here limits the PCIe operation to GEN1 only. It's based on this 
Freescale patch [1]. Without this change, the PCIe switch is not detected. Any 
idea why? (I also had to increase the PHY startup delay to get GEN1 going).

[1] https://www.osadl.org/monitoring/patches/r8s7/1342-ENGR00180230-MX6-PCIE-
enlarge-the-eye-diagram-and-fo.patch

diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 32b30ca..df2838b 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -330,13 +330,16 @@ static void imx6_pcie_host_init(struct pcie_port *pp)
 
        dw_pcie_setup_rc(pp);
 
+// Enable GEN1
+writel(((readl(pp->dbi_base + 0x7c) & 0xfffffff0) | 0x1), pp->dbi_base + 0x7c);
+
        regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
                        IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
 
        while (!dw_pcie_link_up(pp)) {
                usleep_range(100, 1000);
                count++;
-               if (count >= 10) {
+               if (count >= 200) {
                        dev_err(pp->dev, "phy link never came up\n");
                        dev_dbg(pp->dev,
                                "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",

Best regards,
Marek Vasut

  parent reply	other threads:[~2013-10-11  2:13 UTC|newest]

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-26  3:24 [PATCH v7 0/2] Add PCIe support for i.MX6q Shawn Guo
2013-09-26  3:24 ` Shawn Guo
2013-09-26  3:24 ` [PATCH v7 1/2] ARM: imx6q: Add PCIe bits to GPR syscon definition Shawn Guo
2013-09-26  3:24   ` Shawn Guo
2013-09-26  3:24 ` [PATCH v7 2/2] PCI: imx6: Add support for i.MX6 PCIe controller Shawn Guo
2013-09-26  3:24   ` Shawn Guo
2013-09-27 19:24 ` [PATCH v7 0/2] Add PCIe support for i.MX6q Bjorn Helgaas
2013-09-27 19:24   ` Bjorn Helgaas
2013-09-28  6:56   ` Shawn Guo
2013-09-28  6:56     ` Shawn Guo
2013-10-08 20:56   ` Marek Vasut
2013-10-08 20:56     ` Marek Vasut
2013-10-09  5:23     ` Zhu Richard-R65037
2013-10-09  5:23       ` Zhu Richard-R65037
2013-10-10 10:25       ` Marek Vasut
2013-10-10 10:25         ` Marek Vasut
2013-10-10 10:40         ` Zhu Richard-R65037
2013-10-10 10:40           ` Zhu Richard-R65037
2013-10-10 12:59           ` Marek Vasut
2013-10-10 12:59             ` Marek Vasut
2013-10-10 20:33           ` Tim Harvey
2013-10-10 20:33             ` Tim Harvey
2013-10-10 20:40             ` Marek Vasut
2013-10-10 20:40               ` Marek Vasut
2013-10-10 13:27         ` Bjorn Helgaas
2013-10-10 13:27           ` Bjorn Helgaas
2013-10-10 13:43           ` Marek Vasut
2013-10-10 13:43             ` Marek Vasut
2013-10-10 15:58           ` Marek Vasut
2013-10-10 15:58             ` Marek Vasut
2013-10-10 17:17             ` Bjorn Helgaas
2013-10-10 17:17               ` Bjorn Helgaas
2013-10-10 17:39               ` Marek Vasut
2013-10-10 17:39                 ` Marek Vasut
2013-10-10 17:56                 ` Bjorn Helgaas
2013-10-10 17:56                   ` Bjorn Helgaas
2013-10-11  2:12                   ` [PATCH 1/2] PCI: imx6: Make reset-gpio optional Marek Vasut
2013-10-11  2:12                     ` Marek Vasut
2013-10-11  2:12                     ` [PATCH 2/2] PCI: imx6: Fix the clock for PCIe Marek Vasut
2013-10-11  2:12                       ` Marek Vasut
2013-10-11  7:20                       ` Jingoo Han
2013-10-11  7:20                         ` Jingoo Han
2013-10-11 11:55                         ` Marek Vasut
2013-10-11 11:55                           ` Marek Vasut
2013-10-12  7:13                           ` Shawn Guo
2013-10-12  7:13                             ` Shawn Guo
2013-10-11  7:09                     ` [PATCH 1/2] PCI: imx6: Make reset-gpio optional Jingoo Han
2013-10-11  7:09                       ` Jingoo Han
2013-10-12  7:20                     ` Shawn Guo
2013-10-12  7:20                       ` Shawn Guo
2013-10-12  9:28                       ` Marek Vasut
2013-10-12  9:28                         ` Marek Vasut
2013-10-14  0:02                         ` Jingoo Han
2013-10-14  0:02                           ` Jingoo Han
2013-10-14  0:44                           ` Marek Vasut
2013-10-14  0:44                             ` Marek Vasut
2013-10-14  1:17                             ` Marek Vasut
2013-10-14  1:17                               ` Marek Vasut
2013-10-14  2:33                               ` Jingoo Han
2013-10-14  2:33                                 ` Jingoo Han
2013-10-14  3:23                                 ` Marek Vasut
2013-10-14  3:23                                   ` Marek Vasut
2013-10-11  2:13                   ` Marek Vasut [this message]
2013-10-11  2:13                     ` [PATCH v7 0/2] Add PCIe support for i.MX6q Marek Vasut
2013-10-11  2:18                     ` Marek Vasut
2013-10-11  2:18                       ` Marek Vasut
2013-10-11  2:29                       ` Zhu Richard-R65037
2013-10-11  2:29                         ` Zhu Richard-R65037
2013-10-11  4:44                       ` Yinghai Lu
2013-10-11  4:44                         ` Yinghai Lu
2013-10-11 14:44                         ` Marek Vasut
2013-10-11 14:44                           ` Marek Vasut
2013-10-11 15:24                           ` Tim Harvey
2013-10-11 15:24                             ` Tim Harvey
2013-10-11 20:13                             ` Marek Vasut
2013-10-11 20:13                               ` Marek Vasut
2013-10-12  2:16                             ` Zhu Richard-R65037
2013-10-12  2:16                               ` Zhu Richard-R65037
2013-10-12  2:30                               ` Marek Vasut
2013-10-12  2:30                                 ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201310110413.02354.marex@denx.de \
    --to=marex@denx.de \
    --cc=bhelgaas@google.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lznuaa@gmail.com \
    --cc=r65037@freescale.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawn.guo@linaro.org \
    --cc=tharvey@gateworks.com \
    --cc=xobs@kosagi.com \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.