From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO
Date: Fri, 25 Jul 2014 10:30:54 +0200 [thread overview]
Message-ID: <20140725083053.GD9532@piout.net> (raw)
In-Reply-To: <53D1F5D0.1080006@aksignal.cz>
Hi,
On 25/07/2014 at 08:14:40 +0200, Ji?? Prchal wrote :
> I'm using custom board. My spi node:
> spi0: spi at f0000000 {
You should override the pinctrl here as you are using gpios for the cs.
pinctrl-0 = <&pinctrl_spi0_custom>;
> status = "okay";
> cs-gpios = <&pioA 23 0
> &pioA 22 0
> &pioC 29 0
> &pioA 14 0>;
>
pinctrl at fffff400 {
spi0 {
pinctrl_spi0_custom: spi0-custom {
atmel,pins =
<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOC 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOA 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
};
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: "Jiří Prchal" <jiri.prchal-cKCO0sOKHLPtwjQa/ONI9g@public.gmane.org>
Cc: Boris BREZILLON
<boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Bo Shen <voice.shen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO
Date: Fri, 25 Jul 2014 10:30:54 +0200 [thread overview]
Message-ID: <20140725083053.GD9532@piout.net> (raw)
In-Reply-To: <53D1F5D0.1080006-cKCO0sOKHLPtwjQa/ONI9g@public.gmane.org>
Hi,
On 25/07/2014 at 08:14:40 +0200, Jiří Prchal wrote :
> I'm using custom board. My spi node:
> spi0: spi@f0000000 {
You should override the pinctrl here as you are using gpios for the cs.
pinctrl-0 = <&pinctrl_spi0_custom>;
> status = "okay";
> cs-gpios = <&pioA 23 0
> &pioA 22 0
> &pioC 29 0
> &pioA 14 0>;
>
pinctrl@fffff400 {
spi0 {
pinctrl_spi0_custom: spi0-custom {
atmel,pins =
<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOC 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOA 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
};
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: "Jiří Prchal" <jiri.prchal@aksignal.cz>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>,
devicetree@vger.kernel.org, nicolas.ferre@atmel.com,
linux-arm-kernel@lists.infradead.org,
Bo Shen <voice.shen@atmel.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO
Date: Fri, 25 Jul 2014 10:30:54 +0200 [thread overview]
Message-ID: <20140725083053.GD9532@piout.net> (raw)
In-Reply-To: <53D1F5D0.1080006@aksignal.cz>
Hi,
On 25/07/2014 at 08:14:40 +0200, Jiří Prchal wrote :
> I'm using custom board. My spi node:
> spi0: spi@f0000000 {
You should override the pinctrl here as you are using gpios for the cs.
pinctrl-0 = <&pinctrl_spi0_custom>;
> status = "okay";
> cs-gpios = <&pioA 23 0
> &pioA 22 0
> &pioC 29 0
> &pioA 14 0>;
>
pinctrl@fffff400 {
spi0 {
pinctrl_spi0_custom: spi0-custom {
atmel,pins =
<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOC 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOA 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
};
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2014-07-25 8:30 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-11 10:22 [PATCH] ARM: at91: at91sam9x5: add clocks for usb device Bo Shen
2014-07-11 10:22 ` Bo Shen
2014-07-11 10:22 ` Bo Shen
2014-07-11 10:47 ` Alexandre Belloni
2014-07-11 10:47 ` Alexandre Belloni
2014-07-11 10:47 ` Alexandre Belloni
2014-07-11 10:55 ` Jiří Prchal
2014-07-11 10:55 ` Jiří Prchal
2014-07-24 13:38 ` [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO Jiří Prchal
2014-07-24 13:38 ` Jiří Prchal
2014-07-24 13:38 ` Jiří Prchal
2014-07-24 14:26 ` Boris BREZILLON
2014-07-24 14:26 ` Boris BREZILLON
2014-07-24 15:06 ` Jiří Prchal
2014-07-24 15:06 ` Jiří Prchal
2014-07-24 15:58 ` Boris BREZILLON
2014-07-24 15:58 ` Boris BREZILLON
2014-07-25 6:14 ` Jiří Prchal
2014-07-25 6:14 ` Jiří Prchal
2014-07-25 6:14 ` Jiří Prchal
2014-07-25 7:53 ` Boris BREZILLON
2014-07-25 7:53 ` Boris BREZILLON
2014-07-25 7:53 ` Boris BREZILLON
2014-07-25 8:27 ` Jiří Prchal
2014-07-25 8:27 ` Jiří Prchal
2014-07-25 8:27 ` Jiří Prchal
2014-07-25 8:45 ` Boris BREZILLON
2014-07-25 8:45 ` Boris BREZILLON
2014-07-25 8:54 ` Jiří Prchal
2014-07-25 8:54 ` Jiří Prchal
2014-07-25 8:54 ` Jiří Prchal
2014-07-25 9:01 ` Boris BREZILLON
2014-07-25 9:01 ` Boris BREZILLON
2014-07-25 9:13 ` Jiří Prchal
2014-07-25 9:13 ` Jiří Prchal
2014-07-25 9:13 ` Jiří Prchal
2014-07-25 9:31 ` Boris BREZILLON
2014-07-25 9:31 ` Boris BREZILLON
2014-07-25 9:31 ` Boris BREZILLON
2014-07-25 10:06 ` Jiří Prchal
2014-07-25 10:06 ` Jiří Prchal
2014-07-25 10:06 ` Jiří Prchal
2014-07-25 10:18 ` Boris BREZILLON
2014-07-25 10:18 ` Boris BREZILLON
2014-07-25 10:32 ` Jiří Prchal
2014-07-25 10:32 ` Jiří Prchal
2014-07-25 10:32 ` Jiří Prchal
2014-07-25 11:34 ` Boris BREZILLON
2014-07-25 11:34 ` Boris BREZILLON
2014-07-25 11:34 ` Boris BREZILLON
2014-07-25 8:33 ` Jiří Prchal
2014-07-25 8:33 ` Jiří Prchal
2014-07-25 8:30 ` Alexandre Belloni [this message]
2014-07-25 8:30 ` Alexandre Belloni
2014-07-25 8:30 ` Alexandre Belloni
2014-07-25 8:36 ` Boris BREZILLON
2014-07-25 8:36 ` Boris BREZILLON
2014-07-25 8:50 ` Alexandre Belloni
2014-07-25 8:50 ` Alexandre Belloni
2014-07-25 8:50 ` Alexandre Belloni
2014-07-25 8:37 ` Jiří Prchal
2014-07-25 8:37 ` Jiří Prchal
2014-07-25 8:54 ` Alexandre Belloni
2014-07-25 8:54 ` Alexandre Belloni
2014-07-25 8:59 ` Jiří Prchal
2014-07-25 8:59 ` Jiří Prchal
2014-07-25 8:59 ` Jiří Prchal
2014-07-25 9:02 ` Alexandre Belloni
2014-07-25 9:02 ` Alexandre Belloni
2014-07-25 9:10 ` Boris BREZILLON
2014-07-25 9:10 ` Boris BREZILLON
2014-07-25 9:40 ` Jiří Prchal
2014-07-25 9:40 ` Jiří Prchal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140725083053.GD9532@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.