From: jiri.prchal@aksignal.cz (Jiří Prchal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO
Date: Fri, 25 Jul 2014 11:13:51 +0200 [thread overview]
Message-ID: <53D21FCF.7010402@aksignal.cz> (raw)
In-Reply-To: <20140725110124.3f0dce6c@bbrezillon>
Dne 25.7.2014 v 11:01 Boris BREZILLON napsal(a):
> On Fri, 25 Jul 2014 10:54:23 +0200
> Ji?? Prchal <jiri.prchal@aksignal.cz> wrote:
>
>> Here it is:
>> cat /sys/kernel/debug/gpio
>> GPIOs 0-31, platform/fffff400.gpio, fffff400.gpio:
>> [in20] GPIOfffff400.gpio3: [gpio] set
>> [spi0.3] GPIOfffff400.gpio14: [gpio] set
>> [in19] GPIOfffff400.gpio21: [gpio] set
>> [spi0.1] GPIOfffff400.gpio22: [gpio] set
>> [spi0.0] GPIOfffff400.gpio23: [gpio] set
>> [in18] GPIOfffff400.gpio28: [gpio] set
>> [out20] GPIOfffff400.gpio29: [gpio] clear
>> [out18] GPIOfffff400.gpio30: [gpio] clear
>> [out19] GPIOfffff400.gpio31: [gpio] clear
>>
>> GPIOs 32-50, platform/fffff600.gpio, fffff600.gpio:
>> [blue] GPIOfffff600.gpio12: [gpio] set
>> [gsm_on] GPIOfffff600.gpio13: [gpio] clear
>> [yellow] GPIOfffff600.gpio14: [gpio] clear
>> [gsm_rst] GPIOfffff600.gpio15: [gpio] clear
>> [green] GPIOfffff600.gpio16: [gpio] clear
>> [red] GPIOfffff600.gpio18: [gpio] clear
>>
>> GPIOs 64-95, platform/fffff800.gpio, fffff800.gpio:
>> [in17] GPIOfffff800.gpio16: [gpio] set
>> [in13] GPIOfffff800.gpio18: [gpio] set
>> [in14] GPIOfffff800.gpio20: [gpio] set
>> [por] GPIOfffff800.gpio25: [gpio] clear
>> [out16] GPIOfffff800.gpio26: [gpio] clear
>> [out15] GPIOfffff800.gpio28: [gpio] clear
>> [spi0.2] GPIOfffff800.gpio29: [gpio] set
>> [out17] GPIOfffff800.gpio30: [gpio] clear
>>
>> GPIOs 96-117, platform/fffffa00.gpio, fffffa00.gpio:
>> [nand_enable] GPIOfffffa00.gpio4: [gpio] set
>> [nand_rdy] GPIOfffffa00.gpio5: [gpio] set
>> [atmel_usba_udc] GPIOfffffa00.gpio21: [gpio] clear
>>
>
> Every thing seems in place.
> Could you enable CONFIG_DEBUG_PINCTRL and grep on "enable pin" ?
/ # dmesg | grep "enable pin"
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 101 as GPIO
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 101 as PIOD5 0x20
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 100 as GPIO
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 100 as PIOD4 0x10
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 23 as GPIO
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 23 as PIOA23 0x800000
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 22 as GPIO
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 22 as PIOA22 0x400000
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 93 as GPIO
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 93 as PIOC29 0x20000000
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 14 as GPIO
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 14 as PIOA14 0x4000
[ 1.652343] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 117 as GPIO
[ 1.652343] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 117 as PIOD21 0x200000
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 50 as GPIO
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 50 as PIOB18 0x40000
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 48 as GPIO
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 48 as PIOB16 0x10000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 46 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 46 as PIOB14 0x4000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 44 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 44 as PIOB12 0x1000
>
>>
>> Dne 25.7.2014 v 10:45 Boris BREZILLON napsal(a):
>>> On Fri, 25 Jul 2014 10:27:13 +0200
>>> Ji?? Prchal <jiri.prchal@aksignal.cz> wrote:
>>>
>>> [...]
>>>>
>>>>
>>>>> Could you also paste the content of /sys/kernel/debug/gpio ?
>>>> The /sys/kernel/debug/ is empty.
>>>
>>> You have to enable CONFIG_DEBUG_FS in your config and then mount the
>>> debug file system:
>>>
>>> #mount -t debugfs dbg /sys/kernel/debug
>>>
>>>
>>>
>>>
>
>
>
WARNING: multiple messages have this Message-ID (diff)
From: "Jiří Prchal" <jiri.prchal-cKCO0sOKHLPtwjQa/ONI9g@public.gmane.org>
To: Boris BREZILLON
<boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Bo Shen <voice.shen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO
Date: Fri, 25 Jul 2014 11:13:51 +0200 [thread overview]
Message-ID: <53D21FCF.7010402@aksignal.cz> (raw)
In-Reply-To: <20140725110124.3f0dce6c@bbrezillon>
Dne 25.7.2014 v 11:01 Boris BREZILLON napsal(a):
> On Fri, 25 Jul 2014 10:54:23 +0200
> Jiří Prchal <jiri.prchal-cKCO0sOKHLPtwjQa/ONI9g@public.gmane.org> wrote:
>
>> Here it is:
>> cat /sys/kernel/debug/gpio
>> GPIOs 0-31, platform/fffff400.gpio, fffff400.gpio:
>> [in20] GPIOfffff400.gpio3: [gpio] set
>> [spi0.3] GPIOfffff400.gpio14: [gpio] set
>> [in19] GPIOfffff400.gpio21: [gpio] set
>> [spi0.1] GPIOfffff400.gpio22: [gpio] set
>> [spi0.0] GPIOfffff400.gpio23: [gpio] set
>> [in18] GPIOfffff400.gpio28: [gpio] set
>> [out20] GPIOfffff400.gpio29: [gpio] clear
>> [out18] GPIOfffff400.gpio30: [gpio] clear
>> [out19] GPIOfffff400.gpio31: [gpio] clear
>>
>> GPIOs 32-50, platform/fffff600.gpio, fffff600.gpio:
>> [blue] GPIOfffff600.gpio12: [gpio] set
>> [gsm_on] GPIOfffff600.gpio13: [gpio] clear
>> [yellow] GPIOfffff600.gpio14: [gpio] clear
>> [gsm_rst] GPIOfffff600.gpio15: [gpio] clear
>> [green] GPIOfffff600.gpio16: [gpio] clear
>> [red] GPIOfffff600.gpio18: [gpio] clear
>>
>> GPIOs 64-95, platform/fffff800.gpio, fffff800.gpio:
>> [in17] GPIOfffff800.gpio16: [gpio] set
>> [in13] GPIOfffff800.gpio18: [gpio] set
>> [in14] GPIOfffff800.gpio20: [gpio] set
>> [por] GPIOfffff800.gpio25: [gpio] clear
>> [out16] GPIOfffff800.gpio26: [gpio] clear
>> [out15] GPIOfffff800.gpio28: [gpio] clear
>> [spi0.2] GPIOfffff800.gpio29: [gpio] set
>> [out17] GPIOfffff800.gpio30: [gpio] clear
>>
>> GPIOs 96-117, platform/fffffa00.gpio, fffffa00.gpio:
>> [nand_enable] GPIOfffffa00.gpio4: [gpio] set
>> [nand_rdy] GPIOfffffa00.gpio5: [gpio] set
>> [atmel_usba_udc] GPIOfffffa00.gpio21: [gpio] clear
>>
>
> Every thing seems in place.
> Could you enable CONFIG_DEBUG_PINCTRL and grep on "enable pin" ?
/ # dmesg | grep "enable pin"
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 101 as GPIO
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 101 as PIOD5 0x20
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 100 as GPIO
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 100 as PIOD4 0x10
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 23 as GPIO
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 23 as PIOA23 0x800000
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 22 as GPIO
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 22 as PIOA22 0x400000
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 93 as GPIO
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 93 as PIOC29 0x20000000
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 14 as GPIO
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 14 as PIOA14 0x4000
[ 1.652343] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 117 as GPIO
[ 1.652343] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 117 as PIOD21 0x200000
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 50 as GPIO
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 50 as PIOB18 0x40000
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 48 as GPIO
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 48 as PIOB16 0x10000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 46 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 46 as PIOB14 0x4000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 44 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 44 as PIOB12 0x1000
>
>>
>> Dne 25.7.2014 v 10:45 Boris BREZILLON napsal(a):
>>> On Fri, 25 Jul 2014 10:27:13 +0200
>>> Jiří Prchal <jiri.prchal-cKCO0sOKHLPtwjQa/ONI9g@public.gmane.org> wrote:
>>>
>>> [...]
>>>>
>>>>
>>>>> Could you also paste the content of /sys/kernel/debug/gpio ?
>>>> The /sys/kernel/debug/ is empty.
>>>
>>> You have to enable CONFIG_DEBUG_FS in your config and then mount the
>>> debug file system:
>>>
>>> #mount -t debugfs dbg /sys/kernel/debug
>>>
>>>
>>>
>>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: "Jiří Prchal" <jiri.prchal@aksignal.cz>
To: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Bo Shen <voice.shen@atmel.com>,
nicolas.ferre@atmel.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO
Date: Fri, 25 Jul 2014 11:13:51 +0200 [thread overview]
Message-ID: <53D21FCF.7010402@aksignal.cz> (raw)
In-Reply-To: <20140725110124.3f0dce6c@bbrezillon>
Dne 25.7.2014 v 11:01 Boris BREZILLON napsal(a):
> On Fri, 25 Jul 2014 10:54:23 +0200
> Jiří Prchal <jiri.prchal@aksignal.cz> wrote:
>
>> Here it is:
>> cat /sys/kernel/debug/gpio
>> GPIOs 0-31, platform/fffff400.gpio, fffff400.gpio:
>> [in20] GPIOfffff400.gpio3: [gpio] set
>> [spi0.3] GPIOfffff400.gpio14: [gpio] set
>> [in19] GPIOfffff400.gpio21: [gpio] set
>> [spi0.1] GPIOfffff400.gpio22: [gpio] set
>> [spi0.0] GPIOfffff400.gpio23: [gpio] set
>> [in18] GPIOfffff400.gpio28: [gpio] set
>> [out20] GPIOfffff400.gpio29: [gpio] clear
>> [out18] GPIOfffff400.gpio30: [gpio] clear
>> [out19] GPIOfffff400.gpio31: [gpio] clear
>>
>> GPIOs 32-50, platform/fffff600.gpio, fffff600.gpio:
>> [blue] GPIOfffff600.gpio12: [gpio] set
>> [gsm_on] GPIOfffff600.gpio13: [gpio] clear
>> [yellow] GPIOfffff600.gpio14: [gpio] clear
>> [gsm_rst] GPIOfffff600.gpio15: [gpio] clear
>> [green] GPIOfffff600.gpio16: [gpio] clear
>> [red] GPIOfffff600.gpio18: [gpio] clear
>>
>> GPIOs 64-95, platform/fffff800.gpio, fffff800.gpio:
>> [in17] GPIOfffff800.gpio16: [gpio] set
>> [in13] GPIOfffff800.gpio18: [gpio] set
>> [in14] GPIOfffff800.gpio20: [gpio] set
>> [por] GPIOfffff800.gpio25: [gpio] clear
>> [out16] GPIOfffff800.gpio26: [gpio] clear
>> [out15] GPIOfffff800.gpio28: [gpio] clear
>> [spi0.2] GPIOfffff800.gpio29: [gpio] set
>> [out17] GPIOfffff800.gpio30: [gpio] clear
>>
>> GPIOs 96-117, platform/fffffa00.gpio, fffffa00.gpio:
>> [nand_enable] GPIOfffffa00.gpio4: [gpio] set
>> [nand_rdy] GPIOfffffa00.gpio5: [gpio] set
>> [atmel_usba_udc] GPIOfffffa00.gpio21: [gpio] clear
>>
>
> Every thing seems in place.
> Could you enable CONFIG_DEBUG_PINCTRL and grep on "enable pin" ?
/ # dmesg | grep "enable pin"
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 101 as GPIO
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 101 as PIOD5 0x20
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 100 as GPIO
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 100 as PIOD4 0x10
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 23 as GPIO
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 23 as PIOA23 0x800000
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 22 as GPIO
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 22 as PIOA22 0x400000
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 93 as GPIO
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 93 as PIOC29 0x20000000
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 14 as GPIO
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 14 as PIOA14 0x4000
[ 1.652343] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 117 as GPIO
[ 1.652343] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 117 as PIOD21 0x200000
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 50 as GPIO
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 50 as PIOB18 0x40000
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 48 as GPIO
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 48 as PIOB16 0x10000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 46 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 46 as PIOB14 0x4000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 44 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 44 as PIOB12 0x1000
>
>>
>> Dne 25.7.2014 v 10:45 Boris BREZILLON napsal(a):
>>> On Fri, 25 Jul 2014 10:27:13 +0200
>>> Jiří Prchal <jiri.prchal@aksignal.cz> wrote:
>>>
>>> [...]
>>>>
>>>>
>>>>> Could you also paste the content of /sys/kernel/debug/gpio ?
>>>> The /sys/kernel/debug/ is empty.
>>>
>>> You have to enable CONFIG_DEBUG_FS in your config and then mount the
>>> debug file system:
>>>
>>> #mount -t debugfs dbg /sys/kernel/debug
>>>
>>>
>>>
>>>
>
>
>
next prev parent reply other threads:[~2014-07-25 9:13 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-11 10:22 [PATCH] ARM: at91: at91sam9x5: add clocks for usb device Bo Shen
2014-07-11 10:22 ` Bo Shen
2014-07-11 10:22 ` Bo Shen
2014-07-11 10:47 ` Alexandre Belloni
2014-07-11 10:47 ` Alexandre Belloni
2014-07-11 10:47 ` Alexandre Belloni
2014-07-11 10:55 ` Jiří Prchal
2014-07-11 10:55 ` Jiří Prchal
2014-07-24 13:38 ` [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO Jiří Prchal
2014-07-24 13:38 ` Jiří Prchal
2014-07-24 13:38 ` Jiří Prchal
2014-07-24 14:26 ` Boris BREZILLON
2014-07-24 14:26 ` Boris BREZILLON
2014-07-24 15:06 ` Jiří Prchal
2014-07-24 15:06 ` Jiří Prchal
2014-07-24 15:58 ` Boris BREZILLON
2014-07-24 15:58 ` Boris BREZILLON
2014-07-25 6:14 ` Jiří Prchal
2014-07-25 6:14 ` Jiří Prchal
2014-07-25 6:14 ` Jiří Prchal
2014-07-25 7:53 ` Boris BREZILLON
2014-07-25 7:53 ` Boris BREZILLON
2014-07-25 7:53 ` Boris BREZILLON
2014-07-25 8:27 ` Jiří Prchal
2014-07-25 8:27 ` Jiří Prchal
2014-07-25 8:27 ` Jiří Prchal
2014-07-25 8:45 ` Boris BREZILLON
2014-07-25 8:45 ` Boris BREZILLON
2014-07-25 8:54 ` Jiří Prchal
2014-07-25 8:54 ` Jiří Prchal
2014-07-25 8:54 ` Jiří Prchal
2014-07-25 9:01 ` Boris BREZILLON
2014-07-25 9:01 ` Boris BREZILLON
2014-07-25 9:13 ` Jiří Prchal [this message]
2014-07-25 9:13 ` Jiří Prchal
2014-07-25 9:13 ` Jiří Prchal
2014-07-25 9:31 ` Boris BREZILLON
2014-07-25 9:31 ` Boris BREZILLON
2014-07-25 9:31 ` Boris BREZILLON
2014-07-25 10:06 ` Jiří Prchal
2014-07-25 10:06 ` Jiří Prchal
2014-07-25 10:06 ` Jiří Prchal
2014-07-25 10:18 ` Boris BREZILLON
2014-07-25 10:18 ` Boris BREZILLON
2014-07-25 10:32 ` Jiří Prchal
2014-07-25 10:32 ` Jiří Prchal
2014-07-25 10:32 ` Jiří Prchal
2014-07-25 11:34 ` Boris BREZILLON
2014-07-25 11:34 ` Boris BREZILLON
2014-07-25 11:34 ` Boris BREZILLON
2014-07-25 8:33 ` Jiří Prchal
2014-07-25 8:33 ` Jiří Prchal
2014-07-25 8:30 ` Alexandre Belloni
2014-07-25 8:30 ` Alexandre Belloni
2014-07-25 8:30 ` Alexandre Belloni
2014-07-25 8:36 ` Boris BREZILLON
2014-07-25 8:36 ` Boris BREZILLON
2014-07-25 8:50 ` Alexandre Belloni
2014-07-25 8:50 ` Alexandre Belloni
2014-07-25 8:50 ` Alexandre Belloni
2014-07-25 8:37 ` Jiří Prchal
2014-07-25 8:37 ` Jiří Prchal
2014-07-25 8:54 ` Alexandre Belloni
2014-07-25 8:54 ` Alexandre Belloni
2014-07-25 8:59 ` Jiří Prchal
2014-07-25 8:59 ` Jiří Prchal
2014-07-25 8:59 ` Jiří Prchal
2014-07-25 9:02 ` Alexandre Belloni
2014-07-25 9:02 ` Alexandre Belloni
2014-07-25 9:10 ` Boris BREZILLON
2014-07-25 9:10 ` Boris BREZILLON
2014-07-25 9:40 ` Jiří Prchal
2014-07-25 9:40 ` Jiří Prchal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53D21FCF.7010402@aksignal.cz \
--to=jiri.prchal@aksignal.cz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.