From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
To: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Johannes Stezenbach <js@linuxtv.org>,
Shuah Khan <shuah.kh@samsung.com>,
linux-media@vger.kernel.org
Subject: Re: em28xx breaks after hibernate
Date: Fri, 26 Sep 2014 12:35:04 -0300 [thread overview]
Message-ID: <20140926123504.08b9fb1f@recife.lan> (raw)
In-Reply-To: <542584CD.6060507@osg.samsung.com>
Em Fri, 26 Sep 2014 09:22:53 -0600
Shuah Khan <shuahkh@osg.samsung.com> escreveu:
> On 09/26/2014 09:06 AM, Johannes Stezenbach wrote:
> > On Fri, Sep 26, 2014 at 08:30:32AM -0600, Shuah Khan wrote:
> >> On 09/26/2014 08:25 AM, Johannes Stezenbach wrote:
> >>>
> >>> So, what is happening is that the em28xx driver still async initializes
> >>> while the initramfs already has started resume. Thus the rootfs in not
> >>> mounted and the firmware is not loadable. Maybe this is only an issue
> >>> of my qemu test because I compiled a non-modular kernel but don't have
> >>> the firmware in the initramfs for testing simplicity?
> >>>
> >>>
> >>
> >> Right. We have an issue when media drivers are compiled static
> >> (non-modular). I have been debugging that problem for a while.
> >> We have to separate the two cases - if you are compiling em28xx
> >> as static then you will run into the issue.
> >
> > So I compiled em28xx as modules and installed them in my qemu image.
> > One issue solved, but it still breaks after resume:
> >
> > [ 20.212162] usb 1-1: reset high-speed USB device number 2 using ehci-pci
> > [ 20.503868] em2884 #0: Resuming extensions
> > [ 20.505275] em2884 #0: Resuming video extensionem2884 #0: Resuming DVB extension
> > [ 20.533513] drxk: status = 0x439130d9
> > [ 20.534282] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz
> > [ 23.008852] em2884 #0: writing to i2c device at 0x52 failed (error=-5)
> > [ 23.011408] drxk: i2c write error at addr 0x29
> > [ 23.013187] drxk: write_block: i2c write error at addr 0x8303b4
> > [ 23.015440] drxk: Error -5 while loading firmware
> > [ 23.017291] drxk: Error -5 on init_drxk
> > [ 23.018835] em2884 #0: fe0 resume 0
> >
> > Any idea on this?
> >
>
> Looks like this is what's happening:
> during suspend:
>
> drxk_sleep() gets called and marks state->m_drxk_state == DRXK_UNINITIALIZED
>
> init_drxk() does download_microcode() and this step fails
> because the conditions in which init_drxk() gets called
> from drxk_attach() are different.
>
> i2c isn't ready.
>
> Is it possible for you to test this without power loss
> on usb assuming this test run usb bus looses power?
>
> If you could do the following tests and see if there is
> a difference:
>
> echo mem > /sys/power/state
It follows the full logs on my test machine running fedora,
with suspend2ram:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.0-rc5version+ (mchehab@pedra.lan) (gcc version 4.8.1 (GCC) ) #1 SMP Fri Sep 26 12:16:16 BRT 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.17.0-rc5version+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root rhgb quiet LANG=pt_BR.UTF-8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000ad559fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ad55a000-0x00000000ad589fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ad58a000-0x00000000ad59afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ad59b000-0x00000000ad6ccfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ad6cd000-0x00000000ad9dafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ad9db000-0x00000000ad9dbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ad9dc000-0x00000000ada1dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ada1e000-0x00000000adb93fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adb94000-0x00000000adff8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adff9000-0x00000000adffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff990000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x9d2cf018-0x9d2df057] usable ==> usable
[ 0.000000] e820: update [mem 0x9d2c1018-0x9d2ce857] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020100000-0x000000009d2c1017] usable
[ 0.000000] reserve setup_data: [mem 0x000000009d2c1018-0x000000009d2ce857] usable
[ 0.000000] reserve setup_data: [mem 0x000000009d2ce858-0x000000009d2cf017] usable
[ 0.000000] reserve setup_data: [mem 0x000000009d2cf018-0x000000009d2df057] usable
[ 0.000000] reserve setup_data: [mem 0x000000009d2df058-0x00000000ad559fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ad55a000-0x00000000ad589fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ad58a000-0x00000000ad59afff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000ad59b000-0x00000000ad6ccfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000ad6cd000-0x00000000ad9dafff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ad9db000-0x00000000ad9dbfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ad9dc000-0x00000000ada1dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ada1e000-0x00000000adb93fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000adb94000-0x00000000adff8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000adff9000-0x00000000adffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff990000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xad58d000 ACPI 2.0=0xad58d000 SMBIOS=0xf04d0 MPS=0xfd4e0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000008000-0x0000000000009000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000009000-0x000000000002f000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x000000000002f000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem04: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem06: type=4, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002414000) (20MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000002414000-0x0000000020000000) (475MB)
[ 0.000000] efi: mem10: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000020100000-0x000000003ef47000) (494MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x000000003ef47000-0x0000000040000000) (16MB)
[ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x0000000040000000-0x0000000066b5b000) (619MB)
[ 0.000000] efi: mem14: type=2, attr=0xf, range=[0x0000000066b5b000-0x000000008e000000) (628MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x000000008e000000-0x000000008e020000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000008e020000-0x000000009d2c0000) (242MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000009d2c0000-0x000000009d4aa000) (1MB)
[ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x000000009d4aa000-0x000000009d5e5000) (1MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000009d5e5000-0x00000000acc11000) (246MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000acc11000-0x00000000acdec000) (1MB)
[ 0.000000] efi: mem21: type=3, attr=0xf, range=[0x00000000acdec000-0x00000000ad55a000) (7MB)
[ 0.000000] efi: mem22: type=0, attr=0xf, range=[0x00000000ad55a000-0x00000000ad58a000) (0MB)
[ 0.000000] efi: mem23: type=9, attr=0xf, range=[0x00000000ad58a000-0x00000000ad59b000) (0MB)
[ 0.000000] efi: mem24: type=10, attr=0xf, range=[0x00000000ad59b000-0x00000000ad6cd000) (1MB)
[ 0.000000] efi: mem25: type=6, attr=0x800000000000000f, range=[0x00000000ad6cd000-0x00000000ad97f000) (2MB)
[ 0.000000] efi: mem26: type=5, attr=0x800000000000000f, range=[0x00000000ad97f000-0x00000000ad9db000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000ad9db000-0x00000000ad9dc000) (0MB)
[ 0.000000] efi: mem28: type=6, attr=0x800000000000000f, range=[0x00000000ad9dc000-0x00000000ada1e000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000ada1e000-0x00000000adb94000) (1MB)
[ 0.000000] efi: mem30: type=6, attr=0x800000000000000f, range=[0x00000000adb94000-0x00000000adff9000) (4MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000adff9000-0x00000000ae000000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x0000000100000000-0x0000000140000000) (1024MB)
[ 0.000000] efi: mem33: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem34: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem35: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[ 0.000000] efi: mem36: type=11, attr=0x8000000000000001, range=[0x00000000fed03000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem37: type=11, attr=0x8000000000000001, range=[0x00000000fed08000-0x00000000fed09000) (0MB)
[ 0.000000] efi: mem38: type=11, attr=0x8000000000000001, range=[0x00000000fed0c000-0x00000000fed10000) (0MB)
[ 0.000000] efi: mem39: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed1d000) (0MB)
[ 0.000000] efi: mem40: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem41: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x00000000ff000000) (1MB)
[ 0.000000] efi: mem42: type=11, attr=0x8000000000000000, range=[0x00000000ff990000-0x0000000100000000) (6MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff/DE3815TYKH, BIOS TYBYT10H.86A.0019.2014.0327.1516 03/27/201
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 0A0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0AE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xae000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xae000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6a0-0x000fd6af] mapped at [ffff8800000fd6a0]
[ 0.000000] Base memory trampoline at [ffff880000087000] 87000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ff0000, 0x01ff0fff] PGTABLE
[ 0.000000] BRK [0x01ff1000, 0x01ff1fff] PGTABLE
[ 0.000000] BRK [0x01ff2000, 0x01ff2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20100000-0xad559fff]
[ 0.000000] [mem 0x20100000-0x201fffff] page 4k
[ 0.000000] [mem 0x20200000-0xad3fffff] page 2M
[ 0.000000] [mem 0xad400000-0xad559fff] page 4k
[ 0.000000] BRK [0x01ff4000, 0x01ff4fff] PGTABLE
[ 0.000000] BRK [0x01ff5000, 0x01ff5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xad9db000-0xad9dbfff]
[ 0.000000] [mem 0xad9db000-0xad9dbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xada1e000-0xadb93fff]
[ 0.000000] [mem 0xada1e000-0xadb93fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadff9000-0xadffffff]
[ 0.000000] [mem 0xadff9000-0xadffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3ef47000-0x3fffafff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000AD58D000 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x00000000AD58D090 00009C (v01 INTEL DE3815TY 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000AD598440 00010C (v05 INTEL DE3815TY 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20140724/tbfadt-618)
[ 0.000000] ACPI: DSDT 0x00000000AD58D1B8 00B287 (v02 INTEL DE3815TY 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000AD6CCF80 000040
[ 0.000000] ACPI: APIC 0x00000000AD598550 00005A (v03 INTEL DE3815TY 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000AD5985B0 000044 (v01 INTEL DE3815TY 01072009 AMI 00010013)
[ 0.000000] ACPI: TCPA 0x00000000AD5985F8 000032 (v02 INTEL DE3815TY 00000001 MSFT 01000013)
[ 0.000000] ACPI: LPIT 0x00000000AD598630 000104 (v01 INTEL DE3815TY 00000003 VLV2 0100000D)
[ 0.000000] ACPI: MCFG 0x00000000AD598738 00003C (v01 INTEL DE3815TY 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000AD598778 000038 (v01 INTEL DE3815TY 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000AD5987B0 000353 (v01 INTEL DE3815TY 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000AD598B08 000433 (v01 INTEL DE3815TY 00003001 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000AD598F40 000763 (v01 INTEL DE3815TY 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000AD5996A8 000290 (v01 INTEL DE3815TY 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000AD599938 000042 (v01 INTEL DE3815TY 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000AD599980 000530 (v01 INTEL DE3815TY 00000001 INTL 20120913)
[ 0.000000] ACPI: CSRT 0x00000000AD599EB0 00014C (v00 INTEL DE3815TY 00000005 INTL 20120624)
[ 0.000000] ACPI: BGRT 0x00000000AD59A000 000038 (v01 INTEL DE3815TY 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13ffe7000-0x13fffafff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ba00000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20100000-0xad559fff]
[ 0.000000] node 0: [mem 0xad9db000-0xad9dbfff]
[ 0.000000] node 0: [mem 0xada1e000-0xadb93fff]
[ 0.000000] node 0: [mem 0xadff9000-0xadffffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 972150
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 39 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11032 pages used for memmap
[ 0.000000] DMA32 zone: 706008 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0xaf000000-0xbeffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl edge lint[0x39])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d2c1000-0x9d2c1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d2ce000-0x9d2cefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d2cf000-0x9d2cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d2df000-0x9d2dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad55a000-0xad589fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad58a000-0xad59afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad59b000-0xad6ccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad6cd000-0xad9dafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad9dc000-0xada1dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadb94000-0xadff8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae000000-0xaeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xbeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed0c000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xff98ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff990000-0xffffffff]
[ 0.000000] e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s85504 r8192 d20992 u2097152
[ 0.000000] pcpu-alloc: s85504 r8192 d20992 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 956919
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.17.0-rc5version+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root rhgb quiet LANG=pt_BR.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 3465732K/3888600K available (6973K kernel code, 1096K rwdata, 3116K rodata, 1464K init, 1432K bss, 422868K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:8448 nr_irqs:256 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 15728640 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Maximum core-clock to bus-clock ratio: 0xb
[ 0.000000] Resolved frequency ID: 2, frequency: 133200 KHz
[ 0.000000] TSC runs at 1465200 KHz
[ 0.000000] lapic_timer_frequency = 133200
[ 0.000000] tsc: Detected 1465.200 MHz processor
[ 0.000052] Calibrating delay loop (skipped), value calculated using timer frequency.. 2930.40 BogoMIPS (lpj=1465200)
[ 0.000059] pid_max: default: 32768 minimum: 301
[ 0.000084] ACPI: Core revision 20140724
[ 0.030309] ACPI: All ACPI Tables successfully acquired
[ 0.032615] Security Framework initialized
[ 0.032630] SELinux: Initializing.
[ 0.032643] SELinux: Starting in permissive mode
[ 0.033560] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.036258] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.037435] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.037456] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.037936] Initializing cgroup subsys memory
[ 0.037954] Initializing cgroup subsys devices
[ 0.037962] Initializing cgroup subsys freezer
[ 0.037968] Initializing cgroup subsys net_cls
[ 0.037975] Initializing cgroup subsys blkio
[ 0.038014] Initializing cgroup subsys perf_event
[ 0.038022] Initializing cgroup subsys hugetlb
[ 0.038072] CPU: Physical Processor ID: 0
[ 0.038080] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.044121] mce: CPU supports 6 MCE banks
[ 0.044133] CPU0: Thermal monitoring handled by SMI
[ 0.044145] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.051502] Freeing SMP alternatives memory: 24K (ffffffff81e82000 - ffffffff81e88000)
[ 0.081878] ftrace: allocating 26497 entries in 104 pages
[ 0.102670] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.112680] smpboot: CPU0: Intel(R) Atom(TM) CPU E3815 @ 1.46GHz (fam: 06, model: 37, stepping: 03)
[ 0.112709] TSC deadline timer enabled
[ 0.112753] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.112773] ... version: 3
[ 0.112776] ... bit width: 40
[ 0.112779] ... generic registers: 2
[ 0.112782] ... value mask: 000000ffffffffff
[ 0.112785] ... max period: 000000ffffffffff
[ 0.112787] ... fixed-purpose events: 3
[ 0.112790] ... event mask: 0000000700000003
[ 0.116058] x86: Booted up 1 node, 1 CPUs
[ 0.116066] smpboot: Total of 1 processors activated (2930.40 BogoMIPS)
[ 0.116424] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.116645] devtmpfs: initialized
[ 0.117243] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.117250] PM: Registering ACPI NVS region [mem 0xad59b000-0xad6ccfff] (1253376 bytes)
[ 0.120048] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.120057] pinctrl core: initialized pinctrl subsystem
[ 0.120130] RTC time: 15:24:31, date: 09/26/14
[ 0.120429] NET: Registered protocol family 16
[ 0.120867] cpuidle: using governor menu
[ 0.121098] ACPI: bus type PCI registered
[ 0.121105] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.121240] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.121247] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.122286] PCI: Using configuration type 1 for base access
[ 0.126224] ACPI: Added _OSI(Module Device)
[ 0.126231] ACPI: Added _OSI(Processor Device)
[ 0.126235] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.126238] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.146555] ACPI: Interpreter enabled
[ 0.146577] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.146591] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.146629] ACPI: (supports S0 S3 S4 S5)
[ 0.146634] ACPI: Using IOAPIC for interrupt routing
[ 0.146718] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.159274] ACPI: Power Resource [USBC] (on)
[ 0.161607] ACPI: Power Resource [PLPE] (on)
[ 0.162020] ACPI: Power Resource [PLPE] (on)
[ 0.169067] ACPI: Power Resource [CLK0] (on)
[ 0.169202] ACPI: Power Resource [CLK1] (on)
[ 0.238996] ACPI: Power Resource [FN00] (off)
[ 0.240484] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.240499] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.240872] \_SB_.PCI0:_OSC invalid UUID
[ 0.240876] _OSC request data:1 1f 0
[ 0.240888] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.242238] PCI host bridge to bus 0000:00
[ 0.242248] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.242255] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.242260] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.242265] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.242271] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.242276] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.242281] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.242286] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.242303] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.242625] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.242648] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[ 0.242665] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.242682] pci 0000:00:02.0: reg 0x20: [io 0xe080-0xe087]
[ 0.242993] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[ 0.243021] pci 0000:00:13.0: reg 0x10: [io 0xe070-0xe077]
[ 0.243036] pci 0000:00:13.0: reg 0x14: [io 0xe060-0xe063]
[ 0.243049] pci 0000:00:13.0: reg 0x18: [io 0xe050-0xe057]
[ 0.243063] pci 0000:00:13.0: reg 0x1c: [io 0xe040-0xe043]
[ 0.243077] pci 0000:00:13.0: reg 0x20: [io 0xe020-0xe03f]
[ 0.243091] pci 0000:00:13.0: reg 0x24: [mem 0xd072e000-0xd072e7ff]
[ 0.243151] pci 0000:00:13.0: PME# supported from D3hot
[ 0.243420] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.243459] pci 0000:00:14.0: reg 0x10: [mem 0xd0700000-0xd070ffff 64bit]
[ 0.243535] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.243748] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.243871] pci 0000:00:17.0: [8086:0f50] type 00 class 0x080501
[ 0.243897] pci 0000:00:17.0: reg 0x10: [mem 0xd072d000-0xd072dfff]
[ 0.243912] pci 0000:00:17.0: reg 0x14: [mem 0xd072c000-0xd072cfff]
[ 0.243994] pci 0000:00:17.0: PME# supported from D0 D3hot
[ 0.244340] pci 0000:00:18.0: [8086:0f40] type 00 class 0x080102
[ 0.244364] pci 0000:00:18.0: reg 0x10: [mem 0xd0718000-0xd071bfff]
[ 0.244376] pci 0000:00:18.0: reg 0x14: [mem 0xd072b000-0xd072bfff]
[ 0.244698] pci 0000:00:18.1: [8086:0f41] type 00 class 0x0c8000
[ 0.244721] pci 0000:00:18.1: reg 0x10: [mem 0xd072a000-0xd072afff]
[ 0.244733] pci 0000:00:18.1: reg 0x14: [mem 0xd0729000-0xd0729fff]
[ 0.245041] pci 0000:00:18.2: [8086:0f42] type 00 class 0x0c8000
[ 0.245063] pci 0000:00:18.2: reg 0x10: [mem 0xd0728000-0xd0728fff]
[ 0.245076] pci 0000:00:18.2: reg 0x14: [mem 0xd0727000-0xd0727fff]
[ 0.245403] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.245437] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[ 0.245466] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[ 0.245587] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.245911] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ 0.245944] pci 0000:00:1b.0: reg 0x10: [mem 0xd0714000-0xd0717fff 64bit]
[ 0.246032] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.246296] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ 0.246380] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.246657] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ 0.246739] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.247019] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[ 0.247102] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.247373] pci 0000:00:1e.0: [8086:0f06] type 00 class 0x080102
[ 0.247396] pci 0000:00:1e.0: reg 0x10: [mem 0xd0710000-0xd0713fff]
[ 0.247409] pci 0000:00:1e.0: reg 0x14: [mem 0xd0725000-0xd0725fff]
[ 0.247732] pci 0000:00:1e.1: [8086:0f08] type 00 class 0x0c8000
[ 0.247755] pci 0000:00:1e.1: reg 0x10: [mem 0xd0724000-0xd0724fff]
[ 0.247767] pci 0000:00:1e.1: reg 0x14: [mem 0xd0723000-0xd0723fff]
[ 0.248074] pci 0000:00:1e.2: [8086:0f09] type 00 class 0x0c8000
[ 0.248097] pci 0000:00:1e.2: reg 0x10: [mem 0xd0722000-0xd0722fff]
[ 0.248110] pci 0000:00:1e.2: reg 0x14: [mem 0xd0721000-0xd0721fff]
[ 0.248423] pci 0000:00:1e.3: [8086:0f0a] type 00 class 0x078000
[ 0.248446] pci 0000:00:1e.3: reg 0x10: [mem 0xd0720000-0xd0720fff]
[ 0.248458] pci 0000:00:1e.3: reg 0x14: [mem 0xd071f000-0xd071ffff]
[ 0.248777] pci 0000:00:1e.4: [8086:0f0c] type 00 class 0x078000
[ 0.248800] pci 0000:00:1e.4: reg 0x10: [mem 0xd071e000-0xd071efff]
[ 0.248813] pci 0000:00:1e.4: reg 0x14: [mem 0xd071d000-0xd071dfff]
[ 0.249127] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.249465] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 0.249518] pci 0000:00:1f.3: reg 0x10: [mem 0xd071c000-0xd071c01f]
[ 0.249597] pci 0000:00:1f.3: reg 0x20: [io 0xe000-0xe01f]
[ 0.250071] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.250212] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.250382] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.250410] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.250445] pci 0000:03:00.0: reg 0x18: [mem 0xd0604000-0xd0604fff 64bit]
[ 0.250470] pci 0000:03:00.0: reg 0x20: [mem 0xd0600000-0xd0603fff 64bit pref]
[ 0.250587] pci 0000:03:00.0: supports D1 D2
[ 0.250593] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.250676] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.252531] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.252540] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.252548] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff]
[ 0.253603] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.253771] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.253934] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.254098] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.254261] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15)
[ 0.254424] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.254600] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 *14 15)
[ 0.254763] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.257207] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.257561] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.257567] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.257576] vgaarb: loaded
[ 0.257580] vgaarb: bridge control possible 0000:00:02.0
[ 0.257778] SCSI subsystem initialized
[ 0.257879] libata version 3.00 loaded.
[ 0.257960] ACPI: bus type USB registered
[ 0.258024] usbcore: registered new interface driver usbfs
[ 0.258052] usbcore: registered new interface driver hub
[ 0.258111] usbcore: registered new device driver usb
[ 0.258480] PCI: Using ACPI for IRQ routing
[ 0.265618] PCI: pci_cache_line_size set to 64 bytes
[ 0.265714] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.265720] e820: reserve RAM buffer [mem 0x9d2c1018-0x9fffffff]
[ 0.265724] e820: reserve RAM buffer [mem 0x9d2cf018-0x9fffffff]
[ 0.265728] e820: reserve RAM buffer [mem 0xad55a000-0xafffffff]
[ 0.265733] e820: reserve RAM buffer [mem 0xad9dc000-0xafffffff]
[ 0.265737] e820: reserve RAM buffer [mem 0xadb94000-0xafffffff]
[ 0.265741] e820: reserve RAM buffer [mem 0xae000000-0xafffffff]
[ 0.266028] NetLabel: Initializing
[ 0.266033] NetLabel: domain hash size = 128
[ 0.266036] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.266069] NetLabel: unlabeled traffic allowed by default
[ 0.266234] Switched to clocksource refined-jiffies
[ 0.285555] pnp: PnP ACPI init
[ 0.285698] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.286049] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.286057] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.286063] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.286069] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.286078] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.286524] system 00:02: [io 0x0a10-0x0a3f] has been reserved
[ 0.286533] system 00:02: [io 0x0a40-0x0a4f] has been reserved
[ 0.286538] system 00:02: [io 0x0a00-0x0a0f] has been reserved
[ 0.286546] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.287222] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.287231] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.287238] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.287244] system 00:03: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.287251] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.287257] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.287264] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.287270] system 00:03: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.287278] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289075] pnp 00:04: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.289108] pnp: PnP ACPI: found 5 devices
[ 0.299083] Switched to clocksource acpi_pm
[ 0.299114] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.299124] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.299131] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.299144] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.299151] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.299157] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.299171] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.299199] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.299206] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.299212] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.299218] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.299224] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.299230] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.299235] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.299251] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0800000-0xd09fffff]
[ 0.299270] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.299280] pci 0000:00:1c.1: BAR 14: assigned [mem 0xd0c00000-0xd0dfffff]
[ 0.299298] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd0e00000-0xd0ffffff 64bit pref]
[ 0.299316] pci 0000:00:1c.2: BAR 15: assigned [mem 0xd1000000-0xd11fffff 64bit pref]
[ 0.299324] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.299332] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.299341] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.299348] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.299357] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd09fffff]
[ 0.299365] pci 0000:00:1c.0: bridge window [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.299374] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.299380] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.299388] pci 0000:00:1c.1: bridge window [mem 0xd0c00000-0xd0dfffff]
[ 0.299395] pci 0000:00:1c.1: bridge window [mem 0xd0e00000-0xd0ffffff 64bit pref]
[ 0.299404] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.299410] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.299418] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff]
[ 0.299425] pci 0000:00:1c.2: bridge window [mem 0xd1000000-0xd11fffff 64bit pref]
[ 0.299435] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.299440] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.299445] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.299451] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.299456] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.299461] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.299466] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.299472] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.299477] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd09fffff]
[ 0.299482] pci_bus 0000:01: resource 2 [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.299487] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.299492] pci_bus 0000:02: resource 1 [mem 0xd0c00000-0xd0dfffff]
[ 0.299498] pci_bus 0000:02: resource 2 [mem 0xd0e00000-0xd0ffffff 64bit pref]
[ 0.299503] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.299508] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff]
[ 0.299513] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd11fffff 64bit pref]
[ 0.299579] NET: Registered protocol family 2
[ 0.300153] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.300369] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.300588] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.300664] TCP: reno registered
[ 0.300691] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.300753] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.300933] NET: Registered protocol family 1
[ 0.300978] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.301490] PCI: CLS 64 bytes, default 64
[ 0.301634] Unpacking initramfs...
[ 0.943954] Freeing initrd memory: 17104K (ffff88003ef47000 - ffff88003fffb000)
[ 0.944014] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.944022] software IO TLB [mem 0x992c0000-0x9d2c0000] (64MB) mapped at [ffff8800992c0000-ffff88009d2bffff]
[ 0.944873] SSE version of gcm_enc/dec engaged.
[ 0.950762] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.951640] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.951664] Initialise system trusted keyring
[ 0.951718] audit: initializing netlink subsys (disabled)
[ 0.951759] audit: type=2000 audit(1411745071.942:1): initialized
[ 0.952642] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.957122] zpool: loaded
[ 0.957131] zbud: loaded
[ 0.957473] VFS: Disk quotas dquot_6.5.2
[ 0.957580] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.958676] msgmni has been set to 7312
[ 0.958837] Key type big_key registered
[ 0.958846] SELinux: Registering netfilter hooks
[ 0.960642] alg: No test for stdrng (krng)
[ 0.960661] NET: Registered protocol family 38
[ 0.960678] Key type asymmetric registered
[ 0.960686] Asymmetric key parser 'x509' registered
[ 0.960814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.960952] io scheduler noop registered
[ 0.960959] io scheduler deadline registered
[ 0.961064] io scheduler cfq registered (default)
[ 0.962073] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.962120] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.962255] efifb: probing for efifb
[ 0.962305] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010800000, using 5120k, total 5120k
[ 0.962310] efifb: mode is 1280x1024x32, linelength=5120, pages=1
[ 0.962313] efifb: scrolling: redraw
[ 0.962317] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.974270] Console: switching to colour frame buffer device 160x64
[ 0.985140] fb0: EFI VGA frame buffer device
[ 0.985188] intel_idle: MWAIT substates: 0x3000020
[ 0.985192] intel_idle: v0.4 model 0x37
[ 0.985196] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.985521] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.985531] ACPI: Power Button [PWRB]
[ 0.985643] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.985651] ACPI: Sleep Button [SLPB]
[ 0.985767] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.985774] ACPI: Power Button [PWRF]
[ 0.986034] ACPI: Fan [FAN0] (off)
[ 0.989606] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.989613] ACPI: Thermal Zone [TZ01] (27 C)
[ 0.989797] GHES: HEST is not enabled!
[ 0.990021] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.010431] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.011064] serial 0000:00:1e.3: enabling device (0000 -> 0002)
[ 1.011454] 0000:00:1e.3: ttyS1 at MMIO 0xd0720000 (irq = 19, base_baud = 2764800) is a 16550A
[ 1.011632] serial 0000:00:1e.4: enabling device (0000 -> 0002)
[ 1.012003] 0000:00:1e.4: ttyS2 at MMIO 0xd071e000 (irq = 19, base_baud = 2764800) is a 16550A
[ 1.012553] hpet: number irqs doesn't agree with number of timers
[ 1.012728] Non-volatile memory driver v1.3
[ 1.012736] Linux agpgart interface v0.103
[ 1.013129] ahci 0000:00:13.0: version 3.0
[ 1.013355] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[ 1.013407] ahci 0000:00:13.0: irq 87 for MSI/MSI-X
[ 1.023985] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 1.023993] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso
[ 1.024663] scsi host0: ahci
[ 1.025023] scsi host1: ahci
[ 1.025160] ata1: SATA max UDMA/133 abar m2048@0xd072e000 port 0xd072e100 irq 87
[ 1.025165] ata2: DUMMY
[ 1.025403] libphy: Fixed MDIO Bus: probed
[ 1.025655] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.025670] ehci-pci: EHCI PCI platform driver
[ 1.025710] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.025723] ohci-pci: OHCI PCI platform driver
[ 1.025759] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.026127] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.026259] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.026678] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.026710] xhci_hcd 0000:00:14.0: irq 88 for MSI/MSI-X
[ 1.026867] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.026874] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.026879] usb usb1: Product: xHCI Host Controller
[ 1.026884] usb usb1: Manufacturer: Linux 3.17.0-rc5version+ xhci_hcd
[ 1.026888] usb usb1: SerialNumber: 0000:00:14.0
[ 1.027263] hub 1-0:1.0: USB hub found
[ 1.027288] hub 1-0:1.0: 6 ports detected
[ 1.028442] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.028578] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.028688] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.028695] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.028700] usb usb2: Product: xHCI Host Controller
[ 1.028704] usb usb2: Manufacturer: Linux 3.17.0-rc5version+ xhci_hcd
[ 1.028709] usb usb2: SerialNumber: 0000:00:14.0
[ 1.029054] hub 2-0:1.0: USB hub found
[ 1.029077] hub 2-0:1.0: 1 port detected
[ 1.029522] usbcore: registered new interface driver usbserial
[ 1.029544] usbcore: registered new interface driver usbserial_generic
[ 1.029563] usbserial: USB Serial support registered for generic
[ 1.029638] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.062496] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.062729] mousedev: PS/2 mouse device common for all mice
[ 1.063324] rtc_cmos 00:00: RTC can wake from S4
[ 1.063529] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.063568] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 1.063770] device-mapper: uevent: version 1.0.3
[ 1.063969] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.064156] Intel P-state driver initializing.
[ 1.066328] EFI Variables Facility v0.08 2004-May-17
[ 1.067458] efivars: duplicate variable: Events-b452fd8a-c9ca-4764-977e-59d839dd861b
[ 1.067589] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.068607] usbcore: registered new interface driver usbhid
[ 1.068618] usbhid: USB HID core driver
[ 1.068808] drop_monitor: Initializing network drop monitor service
[ 1.069287] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.069392] TCP: cubic registered
[ 1.069430] Initializing XFRM netlink socket
[ 1.070523] NET: Registered protocol family 10
[ 1.071882] mip6: Mobile IPv6
[ 1.071909] NET: Registered protocol family 17
[ 1.073620] Loading compiled-in X.509 certificates
[ 1.073739] registered taskstats version 1
[ 1.075504] Magic number: 14:936:437
[ 1.075715] rtc_cmos 00:00: setting system clock to 2014-09-26 15:24:32 UTC (1411745072)
[ 1.076374] PM: Hibernation image not present or could not be loaded.
[ 1.330856] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.333238] ata1.00: supports DRM functions and may not be fully accessible
[ 1.333405] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.333422] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
[ 1.333435] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.333854] ata1.00: supports DRM functions and may not be fully accessible
[ 1.334008] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.334033] ata1.00: configured for UDMA/133
[ 1.336238] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
[ 1.337621] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.338169] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.338825] sd 0:0:0:0: [sda] Write Protect is off
[ 1.338846] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.339041] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.345736] sda: sda1 sda2 sda3
[ 1.347776] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.353688] Freeing unused kernel memory: 1464K (ffffffff81d14000 - ffffffff81e82000)
[ 1.353701] Write protecting the kernel read-only data: 12288k
[ 1.369424] Freeing unused kernel memory: 1208K (ffff8800016d2000 - ffff880001800000)
[ 1.379286] Freeing unused kernel memory: 980K (ffff880001b0b000 - ffff880001c00000)
[ 1.381448] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[ 1.388098] efivars: duplicate variable: Events-b452fd8a-c9ca-4764-977e-59d839dd861b
[ 1.390834] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 1.391319] systemd[1]: Running in initial RAM disk.
[ 1.391614] systemd[1]: Set hostname to <bronze.lan>.
[ 1.393876] random: systemd urandom read with 13 bits of entropy available
[ 1.492305] systemd[1]: Expecting device dev-mapper-fedora\x2droot.device...
[ 1.492357] systemd[1]: Starting -.slice.
[ 1.493210] systemd[1]: Created slice -.slice.
[ 1.493257] systemd[1]: Starting System Slice.
[ 1.493474] systemd[1]: Created slice System Slice.
[ 1.493577] systemd[1]: Starting Slices.
[ 1.493618] systemd[1]: Reached target Slices.
[ 1.493652] systemd[1]: Starting Timers.
[ 1.493690] systemd[1]: Reached target Timers.
[ 1.493731] systemd[1]: Starting Journal Socket.
[ 1.493912] systemd[1]: Listening on Journal Socket.
[ 1.494273] systemd[1]: Starting dracut cmdline hook...
[ 1.495332] systemd[1]: Starting Journal Service...
[ 1.496589] systemd[1]: Started Journal Service.
[ 1.551321] usb 1-2: New USB device found, idVendor=2101, idProduct=020f
[ 1.551330] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.551596] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.551610] usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.610142] input: HID 2101:020f as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:2101:020F.0001/input/input5
[ 1.610393] hid-generic 0003:2101:020F.0001: input,hidraw0: USB HID v1.01 Keyboard [HID 2101:020f] on usb-0000:00:14.0-2/input0
[ 1.614289] input: HID 2101:020f as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:2101:020F.0002/input/input6
[ 1.614598] hid-generic 0003:2101:020F.0002: input,hidraw1: USB HID v1.01 Mouse [HID 2101:020f] on usb-0000:00:14.0-2/input1
[ 1.768878] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 1.934282] usb 1-3: New USB device found, idVendor=2040, idProduct=1605
[ 1.934291] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 1.934297] usb 1-3: Product: WinTV HVR-930C
[ 1.934301] usb 1-3: SerialNumber: 4034508088
[ 1.949062] tsc: Refined TSC clocksource calibration: 1466.666 MHz
[ 2.088280] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[ 2.253715] usb 1-4: New USB device found, idVendor=05e3, idProduct=0610
[ 2.253724] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.253730] usb 1-4: Product: USB2.0 Hub
[ 2.254523] hub 1-4:1.0: USB hub found
[ 2.255481] hub 1-4:1.0: 4 ports detected
[ 2.362655] systemd-udevd[239]: starting version 208
[ 2.791919] [drm] Initialized drm 1.1.0 20060810
[ 2.856285] [drm] Memory usable by graphics device = 2048M
[ 2.856293] [drm] Replacing VGA console driver
[ 2.856301] checking generic (c0000000 500000) vs hw (c0000000 10000000)
[ 2.856305] fb: switching to inteldrmfb from EFI VGA
[ 2.856359] Console: switching to colour dummy device 80x25
[ 2.872689] i915 0000:00:02.0: irq 89 for MSI/MSI-X
[ 2.872710] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.872714] [drm] Driver supports precise vblank timestamp query.
[ 2.878012] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.878034] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.905642] r8169 0000:03:00.0: irq 90 for MSI/MSI-X
[ 2.906054] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000678000, c0:3f:d5:64:bb:a7, XID 0c000800 IRQ 90
[ 2.906061] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.953726] Switched to clocksource tsc
[ 2.967372] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.004319] [drm] failed to retrieve link info, disabling eDP
[ 3.077832] r8169 0000:03:00.0 p2p1: renamed from eth0
[ 3.078141] systemd-udevd[242]: renamed network interface eth0 to p2p1
[ 3.205288] fbcon: inteldrmfb (fb0) is primary device
[ 3.319078] Console: switching to colour frame buffer device 128x48
[ 3.334264] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.334269] i915 0000:00:02.0: registered panic notifier
[ 3.340719] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.343550] acpi device:09: registered as cooling_device2
[ 3.346389] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 3.349368] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 3.786400] PM: Starting manual resume from disk
[ 3.786411] PM: Hibernation image partition 253:1 present
[ 3.786415] PM: Looking for hibernation image.
[ 3.786671] PM: Image not found (code -22)
[ 3.786677] PM: Hibernation image not present or could not be loaded.
[ 3.817764] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.634508] systemd-journald[95]: Received SIGTERM
[ 4.643716] systemd-cgroups-agent[427]: Failed to get D-Bus connection: Failed to connect to socket /run/systemd/private: No such file or directory
[ 4.689613] random: nonblocking pool is initialized
[ 4.775002] SELinux: 2048 avtab hash slots, 101177 rules.
[ 4.816209] SELinux: 2048 avtab hash slots, 101177 rules.
[ 4.922271] SELinux: 8 users, 86 roles, 4853 types, 288 bools, 1 sens, 1024 cats
[ 4.922281] SELinux: 83 classes, 101177 rules
[ 4.934726] SELinux: Permission audit_read in class capability2 not defined in policy.
[ 4.934741] SELinux: the above unknown classes and permissions will be allowed
[ 4.934757] SELinux: Completing initialization.
[ 4.934760] SELinux: Setting up existing superblocks.
[ 4.934773] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 4.934792] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 4.934803] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 4.934880] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.934952] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 4.936957] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 4.938631] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 4.938641] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 4.938654] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 4.938660] SELinux: initialized (dev aio, type aio), not configured for labeling
[ 4.938667] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 4.938707] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 4.938722] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 4.938739] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 4.938761] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 4.939292] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 4.939299] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.939320] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.939600] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.940598] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.940614] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 4.940622] SELinux: initialized (dev efivarfs, type efivarfs), uses genfs_contexts
[ 4.940630] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.940635] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.940641] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.940654] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.940661] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.940666] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.940671] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.940684] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.940689] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.940699] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 4.940706] SELinux: initialized (dev drm, type drm), not configured for labeling
[ 4.940721] SELinux: initialized (dev dm-0, type ext4), uses xattr
[ 4.944893] audit: type=1403 audit(1411745076.363:2): policy loaded auid=4294967295 ses=4294967295
[ 4.957142] systemd[1]: Successfully loaded SELinux policy in 218.215ms.
[ 5.114621] systemd[1]: Relabelled /dev and /run in 119.360ms.
[ 5.473037] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 5.610976] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 5.740237] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6.229322] systemd-udevd[471]: starting version 208
[ 6.281996] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 7.515955] tpm_tis 00:04: 1.2 TPM (device-id 0x0, rev-id 78)
[ 7.563675] tpm_tis 00:04: TPM is disabled/deactivated (0x7)
[ 7.594178] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.798584] microcode: CPU0 sig=0x30673, pf=0x1, revision=0x31e
[ 7.812348] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.887656] alg: No test for crc32 (crc32-pclmul)
[ 8.357076] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.357249] SELinux: initialized (dev sda2, type ext4), uses xattr
[ 8.376504] snd_hda_intel 0000:00:1b.0: irq 91 for MSI/MSI-X
[ 8.442580] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 8.442658] SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
[ 8.464142] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 8.464151] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.464157] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 8.464162] sound hdaudioC0D0: mono: mono_out=0x0
[ 8.464166] sound hdaudioC0D0: inputs:
[ 8.464171] sound hdaudioC0D0: Mic=0x19
[ 8.549471] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.550018] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.551010] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.724177] Adding 4079612k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:4079612k SSFS
[ 8.948034] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.948055] SELinux: initialized (dev dm-2, type ext4), uses xattr
[ 8.979192] media: Linux media interface: v0.10
[ 9.039042] Linux video capture interface: v2.00
[ 9.047175] systemd-journald[462]: Received request to flush runtime journal from PID 1
[ 9.080916] em28xx: New device WinTV HVR-930C @ 480 Mbps (2040:1605, interface 0, class 0)
[ 9.080924] em28xx: Audio interface 0 found (Vendor Class)
[ 9.080928] em28xx: Video interface 0 found: isoc
[ 9.080931] em28xx: DVB interface 0 found: isoc
[ 9.081521] em28xx: chip ID is em2884
[ 9.142085] em2884 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xe4f009aa
[ 9.142092] em2884 #0: EEPROM info:
[ 9.142096] em2884 #0: microcode start address = 0x0004, boot configuration = 0x01
[ 9.148556] em2884 #0: I2S audio, 5 sample rates
[ 9.148564] em2884 #0: 500mA max power
[ 9.148569] em2884 #0: Table at offset 0x24, strings=0x1e82, 0x186a, 0x0000
[ 9.150498] em2884 #0: Identified as Hauppauge WinTV HVR 930C (card=81)
[ 9.163840] tveeprom 8-0050: Hauppauge model 16009, rev B1F0, serial# 7976248
[ 9.163849] tveeprom 8-0050: MAC address is 00:0d:fe:79:b5:38
[ 9.163854] tveeprom 8-0050: tuner model is Xceive XC5000 (idx 150, type 76)
[ 9.163859] tveeprom 8-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 9.163863] tveeprom 8-0050: audio processor is unknown (idx 45)
[ 9.163867] tveeprom 8-0050: decoder processor is unknown (idx 44)
[ 9.163871] tveeprom 8-0050: has no radio, has IR receiver, has no IR transmitter
[ 9.163876] em2884 #0: analog set to isoc mode.
[ 9.163879] em2884 #0: dvb set to isoc mode.
[ 9.165395] usbcore: registered new interface driver em28xx
[ 9.196626] em2884 #0: Registering V4L2 extension
[ 9.197616] em2884 #0: Config register raw data: 0xca
[ 9.201590] em2884 #0: V4L2 video device registered as video0
[ 9.201598] em2884 #0: V4L2 extension successfully initialized
[ 9.201603] em28xx: Registered (Em28xx v4l2 Extension) extension
[ 9.241811] em2884 #0: Binding DVB extension
[ 9.329886] audit: type=1305 audit(1411745080.743:3): audit_pid=607 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 10.234418] cfg80211: Calling CRDA to update world regulatory domain
[ 10.402732] cfg80211: World regulatory domain updated:
[ 10.402741] cfg80211: DFS Master region: unset
[ 10.402745] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.402751] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.402756] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.402760] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.402765] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.402770] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.402774] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.402779] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.402783] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 10.558330] drxk: status = 0x439130d9
[ 10.558339] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz
[ 10.813011] ttyS1 - failed to request DMA
[ 10.828220] ttyS2 - failed to request DMA
[ 11.149194] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 12.024361] r8169 0000:03:00.0 p2p1: link down
[ 12.024407] r8169 0000:03:00.0 p2p1: link down
[ 12.024668] IPv6: ADDRCONF(NETDEV_UP): p2p1: link is not ready
[ 12.223400] drxk: DRXK driver version 0.9.4300
[ 12.246173] drxk: frontend initialized.
[ 12.310727] xc5000 8-0061: creating new instance
[ 12.311717] xc5000: Successfully identified at address 0x61
[ 12.311723] xc5000: Firmware has not been loaded previously
[ 12.311731] DVB: registering new adapter (em2884 #0)
[ 12.311740] usb 1-3: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
[ 12.314029] em2884 #0: DVB extension successfully initialized
[ 12.314037] em28xx: Registered (Em28xx dvb Extension) extension
[ 12.403756] Bluetooth: Core ver 2.19
[ 12.403935] NET: Registered protocol family 31
[ 12.403940] Bluetooth: HCI device and connection manager initialized
[ 12.403954] Bluetooth: HCI socket layer initialized
[ 12.403961] Bluetooth: L2CAP socket layer initialized
[ 12.403981] Bluetooth: SCO socket layer initialized
[ 12.417124] em2884 #0: Registering input extension
[ 12.463237] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.463244] Bluetooth: BNEP filters: protocol multicast
[ 12.499805] Registered IR keymap rc-hauppauge
[ 12.500075] input: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0/input11
[ 12.500950] rc0: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0
[ 12.501130] em2884 #0: Input extension successfully initalized
[ 12.501136] em28xx: Registered (Em28xx Input Extension) extension
[ 14.262596] r8169 0000:03:00.0 p2p1: link up
[ 14.262618] IPv6: ADDRCONF(NETDEV_CHANGE): p2p1: link becomes ready
[ 319.694599] xc5000: Firmware dvb-fe-xc5000-1.6.114.fw loaded and running.
[ 354.912021] PM: Syncing filesystems ... done.
[ 354.930380] PM: Preparing system for mem sleep
[ 354.931689] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 354.934694] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 354.935980] PM: Entering mem sleep
[ 354.936029] Suspending console(s) (use no_console_suspend to debug)
[ 354.941986] em2884 #0: Suspending extensions
[ 354.942220] em2884 #0: Suspending video extension
[ 354.942870] em2884 #0: Suspending DVB extension
[ 354.942871] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 354.943185] sd 0:0:0:0: [sda] Stopping disk
[ 354.943993] em2884 #0: fe0 suspend 0
[ 355.250517] em2884 #0: Suspending input extension
[ 355.250517] PM: suspend of devices complete after 313.663 msecs
[ 355.262563] PM: late suspend of devices complete after 12.015 msecs
[ 355.263733] r8169 0000:03:00.0: System wakeup enabled by ACPI
[ 355.264517] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 355.275090] PM: noirq suspend of devices complete after 12.501 msecs
[ 355.275144] ACPI: Preparing to enter system sleep state S3
[ 355.276371] PM: Saving platform NVS memory
[ 355.276383] Disabling non-boot CPUs ...
[ 355.276845] ACPI: Low-level resume complete
[ 355.276922] PM: Restoring platform NVS memory
[ 355.277311] CPU0: Thermal monitoring handled by SMI
[ 355.277347] ACPI: Waking up from system sleep state S3
[ 355.381437] acpi LNXPOWER:02: Turning OFF
[ 355.381666] acpi LNXPOWER:01: Turning OFF
[ 355.381829] acpi LNXPOWER:00: Turning OFF
[ 355.393524] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 355.394708] PM: noirq resume of devices complete after 12.819 msecs
[ 355.487333] PM: early resume of devices complete after 92.447 msecs
[ 355.509379] snd_hda_intel 0000:00:1b.0: irq 91 for MSI/MSI-X
[ 355.509592] r8169 0000:03:00.0: System wakeup disabled by ACPI
[ 355.542561] rtc_cmos 00:00: System wakeup disabled by ACPI
[ 355.543157] sd 0:0:0:0: [sda] Starting disk
[ 355.545560] r8169 0000:03:00.0 p2p1: link down
[ 355.560255] tpm_tis 00:04: TPM is disabled/deactivated (0x7)
[ 355.636595] em2884 #0: Resuming extensions
[ 355.636597] em2884 #0: Resuming video extension
[ 355.754811] em2884 #0: Resuming DVB extension
[ 355.754814] em2884 #0: fe0 resume 0
[ 355.754908] em2884 #0: Resuming input extension
[ 355.754908] PM: resume of devices complete after 267.250 msecs
[ 355.755284] PM: Finishing wakeup.
[ 355.755288] Restarting tasks ... done.
[ 355.765627] video LNXVIDEO:00: Restoring backlight state
[ 355.852585] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 355.854472] ata1.00: supports DRM functions and may not be fully accessible
[ 355.854542] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 355.854933] ata1.00: supports DRM functions and may not be fully accessible
[ 355.854999] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 355.855009] ata1.00: configured for UDMA/133
[ 357.923210] r8169 0000:03:00.0 p2p1: link up
I tested DVB-C after suspend/resume. It worked properly:
$ dvbv5-zap -c ~/net_digital.conf -r "canção nova"
using demux '/dev/dvb/adapter0/demux0'
reading channels from file '/home/mchehab/net_digital.conf'
tuning to 651000000 Hz
video pid 3664
dvb_set_pesfilter 3664
audio pid 3665
dvb_set_pesfilter 3665
(0x00) Signal= 100.00%
Lock (0x1f) Quality= Good Signal= 100.00% C/N= 36.20dB UCB= 656 postBER= 546x10^-6 PER= 0
Lock (0x1f) Quality= Good Signal= 100.00% C/N= 36.70dB UCB= 656 postBER= 546x10^-6 PER= 0
DVR interface '/dev/dvb/adapter0/dvr0' can now be opened
(0x00) Quality= Good Signal= 100.00% C/N= 36.80dB UCB= 656 postBER= 26.0x10^-6 PER= 0
Lock (0x1f) Quality= Good Signal= 100.00% C/N= 36.90dB UCB= 863 postBER= 23.5x10^-6 PER= 0
Please notice that the 0x00 status above was just after resuming from ram.
Regards,
Mauro
next prev parent reply other threads:[~2014-09-26 15:35 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-25 12:53 em28xx breaks after hibernate Johannes Stezenbach
2014-09-25 13:45 ` Shuah Khan
2014-09-25 14:10 ` Mauro Carvalho Chehab
2014-09-25 15:07 ` Shuah Khan
2014-09-25 16:01 ` Johannes Stezenbach
2014-09-25 17:36 ` Johannes Stezenbach
2014-09-25 18:01 ` Shuah Khan
2014-09-25 17:40 ` Shuah Khan
2014-09-25 18:17 ` Johannes Stezenbach
2014-09-25 18:45 ` Shuah Khan
2014-09-25 19:03 ` Shuah Khan
2014-09-26 7:41 ` Johannes Stezenbach
2014-09-26 8:00 ` Johannes Stezenbach
2014-09-26 8:08 ` Johannes Stezenbach
2014-09-26 10:14 ` Mauro Carvalho Chehab
2014-09-26 11:07 ` Johannes Stezenbach
2014-09-26 11:42 ` Mauro Carvalho Chehab
2014-09-26 12:02 ` Johannes Stezenbach
2014-09-26 12:11 ` Mauro Carvalho Chehab
2014-09-26 12:03 ` Mauro Carvalho Chehab
2014-09-26 12:27 ` Johannes Stezenbach
2014-09-26 13:12 ` Mauro Carvalho Chehab
2014-09-26 13:25 ` Johannes Stezenbach
2014-09-26 14:25 ` Shuah Khan
2014-09-26 14:25 ` Johannes Stezenbach
2014-09-26 14:30 ` Shuah Khan
2014-09-26 15:06 ` Johannes Stezenbach
2014-09-26 15:22 ` Johannes Stezenbach
2014-09-26 15:43 ` Mauro Carvalho Chehab
2014-09-28 10:55 ` Johannes Stezenbach
2014-09-28 11:12 ` Mauro Carvalho Chehab
2014-09-28 11:54 ` Johannes Stezenbach
2014-09-28 12:35 ` Mauro Carvalho Chehab
2014-09-28 12:57 ` Mauro Carvalho Chehab
2014-09-29 2:38 ` Mauro Carvalho Chehab
2014-09-26 15:22 ` Shuah Khan
2014-09-26 15:35 ` Mauro Carvalho Chehab [this message]
2014-09-26 15:40 ` Mauro Carvalho Chehab
2014-09-26 15:42 ` Johannes Stezenbach
2014-09-26 15:48 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140926123504.08b9fb1f@recife.lan \
--to=mchehab@osg.samsung.com \
--cc=js@linuxtv.org \
--cc=linux-media@vger.kernel.org \
--cc=shuah.kh@samsung.com \
--cc=shuahkh@osg.samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.