All of lore.kernel.org
 help / color / mirror / Atom feed
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/9] clk: sunxi: Give sunxi_factors_register a registers parameter
Date: Fri, 21 Nov 2014 12:15:03 +0100	[thread overview]
Message-ID: <20141121111503.GC4752@lukather> (raw)
In-Reply-To: <546EFB83.1020806@redhat.com>

On Fri, Nov 21, 2014 at 09:44:51AM +0100, Hans de Goede wrote:
> Hi,
> 
> On 11/21/2014 09:35 AM, Maxime Ripard wrote:
> > Hi Hans,
> > 
> > On Thu, Nov 20, 2014 at 04:55:20PM +0100, Hans de Goede wrote:
> >> Before this commit sunxi_factors_register uses of_iomap(node, 0) to get
> >> the clk registers. The sun6i prcm has factor clocks, for which we want to
> >> use sunxi_factors_register, but of_iomap(node, 0) does not work for the prcm
> >> factor clocks, because the prcm uses the mfd framework, so the registers
> >> are not part of the dt-node, instead they are added to the platform_device,
> >> as platform_device resources.
> >>
> >> This commit makes getting the registers the callers duty, so that
> >> sunxi_factors_register can be used with mfd instantiated platform device too.
> >>
> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> > 
> > Funny, I was thinking of doing exactly the same thing for MMC clocks :)
> > 
> >> ---
> >>  drivers/clk/sunxi/clk-factors.c    | 10 ++++------
> >>  drivers/clk/sunxi/clk-factors.h    |  7 ++++---
> >>  drivers/clk/sunxi/clk-mod0.c       |  6 ++++--
> >>  drivers/clk/sunxi/clk-sun8i-mbus.c |  2 +-
> >>  drivers/clk/sunxi/clk-sunxi.c      |  3 ++-
> >>  5 files changed, 15 insertions(+), 13 deletions(-)
> >>
> >> diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
> >> index f83ba09..fc4f4b5 100644
> >> --- a/drivers/clk/sunxi/clk-factors.c
> >> +++ b/drivers/clk/sunxi/clk-factors.c
> >> @@ -156,9 +156,10 @@ static const struct clk_ops clk_factors_ops = {
> >>  	.set_rate = clk_factors_set_rate,
> >>  };
> >>  
> >> -struct clk * __init sunxi_factors_register(struct device_node *node,
> >> -					   const struct factors_data *data,
> >> -					   spinlock_t *lock)
> >> +struct clk *sunxi_factors_register(struct device_node *node,
> >> +				   const struct factors_data *data,
> >> +				   spinlock_t *lock,
> >> +				   void __iomem *reg)
> >>  {
> >>  	struct clk *clk;
> >>  	struct clk_factors *factors;
> >> @@ -168,11 +169,8 @@ struct clk * __init sunxi_factors_register(struct device_node *node,
> >>  	struct clk_hw *mux_hw = NULL;
> >>  	const char *clk_name = node->name;
> >>  	const char *parents[FACTORS_MAX_PARENTS];
> >> -	void __iomem *reg;
> >>  	int i = 0;
> >>  
> >> -	reg = of_iomap(node, 0);
> >> -
> >>  	/* if we have a mux, we will have >1 parents */
> >>  	while (i < FACTORS_MAX_PARENTS &&
> >>  	       (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
> >> diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h
> >> index 9913840..1f5526d 100644
> >> --- a/drivers/clk/sunxi/clk-factors.h
> >> +++ b/drivers/clk/sunxi/clk-factors.h
> >> @@ -37,8 +37,9 @@ struct clk_factors {
> >>  	spinlock_t *lock;
> >>  };
> >>  
> >> -struct clk * __init sunxi_factors_register(struct device_node *node,
> >> -					   const struct factors_data *data,
> >> -					   spinlock_t *lock);
> >> +struct clk *sunxi_factors_register(struct device_node *node,
> >> +				   const struct factors_data *data,
> >> +				   spinlock_t *lock,
> >> +				   void __iomem *reg);
> > 
> > Why are you dropping the __init there?
> 
> Because it is going to be used from mfd instantiation, so from a platform_dev
> probe function which is not __init.

Ah right. Mentionning it in the commit log would be nice.

> 
> > 
> >>  
> >>  #endif
> >> diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c
> >> index 4a56385..9530833 100644
> >> --- a/drivers/clk/sunxi/clk-mod0.c
> >> +++ b/drivers/clk/sunxi/clk-mod0.c
> >> @@ -78,7 +78,8 @@ static DEFINE_SPINLOCK(sun4i_a10_mod0_lock);
> >>  
> >>  static void __init sun4i_a10_mod0_setup(struct device_node *node)
> >>  {
> >> -	sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun4i_a10_mod0_lock);
> >> +	sunxi_factors_register(node, &sun4i_a10_mod0_data,
> >> +			       &sun4i_a10_mod0_lock, of_iomap(node, 0));
> > 
> > As of_iomap can fail, I'd rather check the returned value before
> > calling sunxi_factors_register.
> > 
> > I know it wasn't done before, but it's the right thing to do, as it
> > would lead to an instant crash if that fails.
> 
> Ok, I'll wait for you to review the rest of the series and then do a v2 of the
> patch-set with this fixed (as time permits).

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141121/157b6862/attachment.sig>

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Emilio Lopez <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>,
	Mike Turquette
	<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Linux Media Mailing List
	<linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH 1/9] clk: sunxi: Give sunxi_factors_register a registers parameter
Date: Fri, 21 Nov 2014 12:15:03 +0100	[thread overview]
Message-ID: <20141121111503.GC4752@lukather> (raw)
In-Reply-To: <546EFB83.1020806-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

[-- Attachment #1: Type: text/plain, Size: 4433 bytes --]

On Fri, Nov 21, 2014 at 09:44:51AM +0100, Hans de Goede wrote:
> Hi,
> 
> On 11/21/2014 09:35 AM, Maxime Ripard wrote:
> > Hi Hans,
> > 
> > On Thu, Nov 20, 2014 at 04:55:20PM +0100, Hans de Goede wrote:
> >> Before this commit sunxi_factors_register uses of_iomap(node, 0) to get
> >> the clk registers. The sun6i prcm has factor clocks, for which we want to
> >> use sunxi_factors_register, but of_iomap(node, 0) does not work for the prcm
> >> factor clocks, because the prcm uses the mfd framework, so the registers
> >> are not part of the dt-node, instead they are added to the platform_device,
> >> as platform_device resources.
> >>
> >> This commit makes getting the registers the callers duty, so that
> >> sunxi_factors_register can be used with mfd instantiated platform device too.
> >>
> >> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> > 
> > Funny, I was thinking of doing exactly the same thing for MMC clocks :)
> > 
> >> ---
> >>  drivers/clk/sunxi/clk-factors.c    | 10 ++++------
> >>  drivers/clk/sunxi/clk-factors.h    |  7 ++++---
> >>  drivers/clk/sunxi/clk-mod0.c       |  6 ++++--
> >>  drivers/clk/sunxi/clk-sun8i-mbus.c |  2 +-
> >>  drivers/clk/sunxi/clk-sunxi.c      |  3 ++-
> >>  5 files changed, 15 insertions(+), 13 deletions(-)
> >>
> >> diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
> >> index f83ba09..fc4f4b5 100644
> >> --- a/drivers/clk/sunxi/clk-factors.c
> >> +++ b/drivers/clk/sunxi/clk-factors.c
> >> @@ -156,9 +156,10 @@ static const struct clk_ops clk_factors_ops = {
> >>  	.set_rate = clk_factors_set_rate,
> >>  };
> >>  
> >> -struct clk * __init sunxi_factors_register(struct device_node *node,
> >> -					   const struct factors_data *data,
> >> -					   spinlock_t *lock)
> >> +struct clk *sunxi_factors_register(struct device_node *node,
> >> +				   const struct factors_data *data,
> >> +				   spinlock_t *lock,
> >> +				   void __iomem *reg)
> >>  {
> >>  	struct clk *clk;
> >>  	struct clk_factors *factors;
> >> @@ -168,11 +169,8 @@ struct clk * __init sunxi_factors_register(struct device_node *node,
> >>  	struct clk_hw *mux_hw = NULL;
> >>  	const char *clk_name = node->name;
> >>  	const char *parents[FACTORS_MAX_PARENTS];
> >> -	void __iomem *reg;
> >>  	int i = 0;
> >>  
> >> -	reg = of_iomap(node, 0);
> >> -
> >>  	/* if we have a mux, we will have >1 parents */
> >>  	while (i < FACTORS_MAX_PARENTS &&
> >>  	       (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
> >> diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h
> >> index 9913840..1f5526d 100644
> >> --- a/drivers/clk/sunxi/clk-factors.h
> >> +++ b/drivers/clk/sunxi/clk-factors.h
> >> @@ -37,8 +37,9 @@ struct clk_factors {
> >>  	spinlock_t *lock;
> >>  };
> >>  
> >> -struct clk * __init sunxi_factors_register(struct device_node *node,
> >> -					   const struct factors_data *data,
> >> -					   spinlock_t *lock);
> >> +struct clk *sunxi_factors_register(struct device_node *node,
> >> +				   const struct factors_data *data,
> >> +				   spinlock_t *lock,
> >> +				   void __iomem *reg);
> > 
> > Why are you dropping the __init there?
> 
> Because it is going to be used from mfd instantiation, so from a platform_dev
> probe function which is not __init.

Ah right. Mentionning it in the commit log would be nice.

> 
> > 
> >>  
> >>  #endif
> >> diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c
> >> index 4a56385..9530833 100644
> >> --- a/drivers/clk/sunxi/clk-mod0.c
> >> +++ b/drivers/clk/sunxi/clk-mod0.c
> >> @@ -78,7 +78,8 @@ static DEFINE_SPINLOCK(sun4i_a10_mod0_lock);
> >>  
> >>  static void __init sun4i_a10_mod0_setup(struct device_node *node)
> >>  {
> >> -	sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun4i_a10_mod0_lock);
> >> +	sunxi_factors_register(node, &sun4i_a10_mod0_data,
> >> +			       &sun4i_a10_mod0_lock, of_iomap(node, 0));
> > 
> > As of_iomap can fail, I'd rather check the returned value before
> > calling sunxi_factors_register.
> > 
> > I know it wasn't done before, but it's the right thing to do, as it
> > would lead to an instant crash if that fails.
> 
> Ok, I'll wait for you to review the rest of the series and then do a v2 of the
> patch-set with this fixed (as time permits).

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Emilio Lopez <emilio@elopez.com.ar>,
	Mike Turquette <mturquette@linaro.org>,
	Linux Media Mailing List <linux-media@vger.kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	devicetree <devicetree@vger.kernel.org>,
	linux-sunxi@googlegroups.com
Subject: Re: [PATCH 1/9] clk: sunxi: Give sunxi_factors_register a registers parameter
Date: Fri, 21 Nov 2014 12:15:03 +0100	[thread overview]
Message-ID: <20141121111503.GC4752@lukather> (raw)
In-Reply-To: <546EFB83.1020806@redhat.com>

[-- Attachment #1: Type: text/plain, Size: 4519 bytes --]

On Fri, Nov 21, 2014 at 09:44:51AM +0100, Hans de Goede wrote:
> Hi,
> 
> On 11/21/2014 09:35 AM, Maxime Ripard wrote:
> > Hi Hans,
> > 
> > On Thu, Nov 20, 2014 at 04:55:20PM +0100, Hans de Goede wrote:
> >> Before this commit sunxi_factors_register uses of_iomap(node, 0) to get
> >> the clk registers. The sun6i prcm has factor clocks, for which we want to
> >> use sunxi_factors_register, but of_iomap(node, 0) does not work for the prcm
> >> factor clocks, because the prcm uses the mfd framework, so the registers
> >> are not part of the dt-node, instead they are added to the platform_device,
> >> as platform_device resources.
> >>
> >> This commit makes getting the registers the callers duty, so that
> >> sunxi_factors_register can be used with mfd instantiated platform device too.
> >>
> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> > 
> > Funny, I was thinking of doing exactly the same thing for MMC clocks :)
> > 
> >> ---
> >>  drivers/clk/sunxi/clk-factors.c    | 10 ++++------
> >>  drivers/clk/sunxi/clk-factors.h    |  7 ++++---
> >>  drivers/clk/sunxi/clk-mod0.c       |  6 ++++--
> >>  drivers/clk/sunxi/clk-sun8i-mbus.c |  2 +-
> >>  drivers/clk/sunxi/clk-sunxi.c      |  3 ++-
> >>  5 files changed, 15 insertions(+), 13 deletions(-)
> >>
> >> diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
> >> index f83ba09..fc4f4b5 100644
> >> --- a/drivers/clk/sunxi/clk-factors.c
> >> +++ b/drivers/clk/sunxi/clk-factors.c
> >> @@ -156,9 +156,10 @@ static const struct clk_ops clk_factors_ops = {
> >>  	.set_rate = clk_factors_set_rate,
> >>  };
> >>  
> >> -struct clk * __init sunxi_factors_register(struct device_node *node,
> >> -					   const struct factors_data *data,
> >> -					   spinlock_t *lock)
> >> +struct clk *sunxi_factors_register(struct device_node *node,
> >> +				   const struct factors_data *data,
> >> +				   spinlock_t *lock,
> >> +				   void __iomem *reg)
> >>  {
> >>  	struct clk *clk;
> >>  	struct clk_factors *factors;
> >> @@ -168,11 +169,8 @@ struct clk * __init sunxi_factors_register(struct device_node *node,
> >>  	struct clk_hw *mux_hw = NULL;
> >>  	const char *clk_name = node->name;
> >>  	const char *parents[FACTORS_MAX_PARENTS];
> >> -	void __iomem *reg;
> >>  	int i = 0;
> >>  
> >> -	reg = of_iomap(node, 0);
> >> -
> >>  	/* if we have a mux, we will have >1 parents */
> >>  	while (i < FACTORS_MAX_PARENTS &&
> >>  	       (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
> >> diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h
> >> index 9913840..1f5526d 100644
> >> --- a/drivers/clk/sunxi/clk-factors.h
> >> +++ b/drivers/clk/sunxi/clk-factors.h
> >> @@ -37,8 +37,9 @@ struct clk_factors {
> >>  	spinlock_t *lock;
> >>  };
> >>  
> >> -struct clk * __init sunxi_factors_register(struct device_node *node,
> >> -					   const struct factors_data *data,
> >> -					   spinlock_t *lock);
> >> +struct clk *sunxi_factors_register(struct device_node *node,
> >> +				   const struct factors_data *data,
> >> +				   spinlock_t *lock,
> >> +				   void __iomem *reg);
> > 
> > Why are you dropping the __init there?
> 
> Because it is going to be used from mfd instantiation, so from a platform_dev
> probe function which is not __init.

Ah right. Mentionning it in the commit log would be nice.

> 
> > 
> >>  
> >>  #endif
> >> diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c
> >> index 4a56385..9530833 100644
> >> --- a/drivers/clk/sunxi/clk-mod0.c
> >> +++ b/drivers/clk/sunxi/clk-mod0.c
> >> @@ -78,7 +78,8 @@ static DEFINE_SPINLOCK(sun4i_a10_mod0_lock);
> >>  
> >>  static void __init sun4i_a10_mod0_setup(struct device_node *node)
> >>  {
> >> -	sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun4i_a10_mod0_lock);
> >> +	sunxi_factors_register(node, &sun4i_a10_mod0_data,
> >> +			       &sun4i_a10_mod0_lock, of_iomap(node, 0));
> > 
> > As of_iomap can fail, I'd rather check the returned value before
> > calling sunxi_factors_register.
> > 
> > I know it wasn't done before, but it's the right thing to do, as it
> > would lead to an instant crash if that fails.
> 
> Ok, I'll wait for you to review the rest of the series and then do a v2 of the
> patch-set with this fixed (as time permits).

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  reply	other threads:[~2014-11-21 11:15 UTC|newest]

Thread overview: 125+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-20 15:55 [PATCH 0/9] sun6i / A31 ir receiver support Hans de Goede
2014-11-20 15:55 ` Hans de Goede
2014-11-20 15:55 ` Hans de Goede
2014-11-20 15:55 ` [PATCH 1/9] clk: sunxi: Give sunxi_factors_register a registers parameter Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-21  8:35   ` Maxime Ripard
2014-11-21  8:35     ` Maxime Ripard
2014-11-21  8:44     ` Hans de Goede
2014-11-21  8:44       ` Hans de Goede
2014-11-21  8:44       ` Hans de Goede
2014-11-21 11:15       ` Maxime Ripard [this message]
2014-11-21 11:15         ` Maxime Ripard
2014-11-21 11:15         ` Maxime Ripard
2014-11-20 15:55 ` [PATCH 2/9] clk: sunxi: Make sun4i_a10_mod0_data available outside of clk-mod0.c Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55 ` [PATCH 3/9] clk: sunxi: Add prcm mod0 clock driver Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 18:24   ` [linux-sunxi] " Chen-Yu Tsai
2014-11-20 18:24     ` Chen-Yu Tsai
2014-11-20 18:24     ` Chen-Yu Tsai
2014-11-20 19:32     ` [linux-sunxi] " Hans de Goede
2014-11-20 19:32       ` Hans de Goede
2014-11-20 19:32       ` Hans de Goede
2014-11-21  8:49   ` Maxime Ripard
2014-11-21  8:49     ` Maxime Ripard
2014-11-21  8:49     ` Maxime Ripard
2014-11-21  9:13     ` Hans de Goede
2014-11-21  9:13       ` Hans de Goede
2014-11-21  9:13       ` Hans de Goede
2014-11-24 22:03       ` Maxime Ripard
2014-11-24 22:03         ` Maxime Ripard
2014-11-24 22:03         ` Maxime Ripard
2014-11-25  8:29         ` Hans de Goede
2014-11-25  8:29           ` Hans de Goede
2014-11-25  8:29           ` Hans de Goede
2014-11-25  8:37           ` Hans de Goede
2014-11-25  8:37             ` Hans de Goede
2014-11-25  8:37             ` Hans de Goede
2014-11-26 21:13           ` Maxime Ripard
2014-11-26 21:13             ` Maxime Ripard
2014-11-26 21:13             ` Maxime Ripard
2014-11-27  8:41             ` Hans de Goede
2014-11-27  8:41               ` Hans de Goede
2014-11-27  8:41               ` Hans de Goede
2014-11-27  9:28               ` Chen-Yu Tsai
2014-11-27  9:28                 ` Chen-Yu Tsai
2014-11-27  9:28                 ` Chen-Yu Tsai
2014-11-27 10:10                 ` Hans de Goede
2014-11-27 10:10                   ` Hans de Goede
2014-11-27 10:10                   ` Hans de Goede
2014-11-27 19:05                   ` Maxime Ripard
2014-11-27 19:05                     ` Maxime Ripard
2014-11-27 19:05                     ` Maxime Ripard
2014-11-28 13:37                     ` Hans de Goede
2014-11-28 13:37                       ` Hans de Goede
2014-11-28 13:37                       ` Hans de Goede
2014-12-02 15:45                       ` Maxime Ripard
2014-12-02 15:45                         ` Maxime Ripard
2014-12-02 15:45                         ` Maxime Ripard
2014-12-03  9:49                         ` Hans de Goede
2014-12-03  9:49                           ` Hans de Goede
2014-12-03  9:49                           ` Hans de Goede
2014-12-07 18:08                           ` Maxime Ripard
2014-12-07 18:08                             ` Maxime Ripard
2014-12-07 18:08                             ` Maxime Ripard
2014-12-08  8:19                             ` Hans de Goede
2014-12-08  8:19                               ` Hans de Goede
2014-12-08  8:19                               ` Hans de Goede
2014-12-09  8:51                               ` Maxime Ripard
2014-12-09  8:51                                 ` Maxime Ripard
2014-12-09  8:51                                 ` Maxime Ripard
2014-11-27 18:51               ` Maxime Ripard
2014-11-27 18:51                 ` Maxime Ripard
2014-11-27 18:51                 ` Maxime Ripard
2014-11-27 16:40             ` Boris Brezillon
2014-11-27 16:40               ` Boris Brezillon
2014-11-27 16:40               ` Boris Brezillon
2014-11-27 19:15               ` Maxime Ripard
2014-11-27 19:15                 ` Maxime Ripard
2014-11-27 19:15                 ` Maxime Ripard
2014-11-20 15:55 ` [PATCH 4/9] rc: sunxi-cir: Add support for an optional reset controller Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 16:28   ` Mauro Carvalho Chehab
2014-11-20 16:28     ` Mauro Carvalho Chehab
2014-11-21  8:51     ` Maxime Ripard
2014-11-21  8:51       ` Maxime Ripard
2014-11-21  8:51       ` Maxime Ripard
2014-11-20 23:05   ` [linux-sunxi] " Julian Calaby
2014-11-20 23:05     ` Julian Calaby
2014-11-20 23:05     ` Julian Calaby
2014-11-20 15:55 ` [PATCH 5/9] rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 16:28   ` Mauro Carvalho Chehab
2014-11-20 16:28     ` Mauro Carvalho Chehab
2014-11-21  8:26     ` Maxime Ripard
2014-11-21  8:26       ` Maxime Ripard
2014-11-21  8:42       ` Hans de Goede
2014-11-21  8:42         ` Hans de Goede
2014-11-21  8:42         ` Hans de Goede
2014-11-21  9:59         ` Maxime Ripard
2014-11-21  9:59           ` Maxime Ripard
2014-11-21  9:59           ` Maxime Ripard
2014-11-21 10:13           ` Hans de Goede
2014-11-21 10:13             ` Hans de Goede
2014-11-21 10:13             ` Hans de Goede
2014-11-23 15:47             ` Maxime Ripard
2014-11-23 15:47               ` Maxime Ripard
2014-11-23 15:47               ` Maxime Ripard
2014-11-20 15:55 ` [PATCH 6/9] ARM: dts: sun6i: Add ir_clk node Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55 ` [PATCH 7/9] ARM: dts: sun6i: Add ir node Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55 ` [PATCH 8/9] ARM: dts: sun6i: Add pinmux settings for the ir pins Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55 ` [PATCH 9/9] ARM: dts: sun6i: Enable ir receiver on the Mele M9 Hans de Goede
2014-11-20 15:55   ` Hans de Goede
2014-11-20 15:55   ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141121111503.GC4752@lukather \
    --to=maxime.ripard@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.