From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2
Date: Sun, 12 Jul 2015 14:51:01 +0800 [thread overview]
Message-ID: <20150712065101.GA14354@localhost> (raw)
In-Reply-To: <1435213498-21025-1-git-send-email-b18965@freescale.com>
On Thu, Jun 25, 2015 at 02:24:58PM +0800, Alison Wang wrote:
> @@ -391,6 +394,85 @@
> reg = <0x0 0x2d24000 0x0 0x4000>;
> };
>
> + enet0: ethernet at 2d10000 {
Most of the vendor specific properties below are undocumented bindings.
Shawn
> + compatible = "fsl,etsec2";
> + device_type = "network";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> + model = "eTSEC";
> + fsl,dma-endian-le;
> + fsl,magic-packet;
> + fsl,wake-on-filer;
> + fsl,num_rx_queues = <0x1>;
> + fsl,num_tx_queues = <0x1>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + ranges;
> +
> + queue-group at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x0 0x2d10000 0x0 0x8000>;
> + fsl,rx-bit-map = <0xff>;
> + fsl,tx-bit-map = <0xff>;
> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + };
> +
> + enet1: ethernet at 2d50000 {
> + compatible = "fsl,etsec2";
> + device_type = "network";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> + model = "eTSEC";
> + fsl,dma-endian-le;
> + fsl,num_rx_queues = <0x1>;
> + fsl,num_tx_queues = <0x1>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + ranges;
> +
> + queue-group at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x0 0x2d50000 0x0 0x8000>;
> + fsl,rx-bit-map = <0xff>;
> + fsl,tx-bit-map = <0xff>;
> + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + };
> +
> + enet2: ethernet at 2d90000 {
> + compatible = "fsl,etsec2";
> + device_type = "network";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> + model = "eTSEC";
> + fsl,dma-endian-le;
> + fsl,num_rx_queues = <0x1>;
> + fsl,num_tx_queues = <0x1>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + ranges;
> +
> + queue-group at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x0 0x2d90000 0x0 0x8000>;
> + fsl,rx-bit-map = <0xff>;
> + fsl,tx-bit-map = <0xff>;
> + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> usb at 8600000 {
> compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
> reg = <0x0 0x8600000 0x0 0x1000>;
> --
> 2.1.0.27.g96db324
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Alison Wang <b18965@freescale.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, shawn.guo@linaro.org,
Claudiu Manoil <claudiu.manoil@freescale.com>,
Alison Wang <alison.wang@freescale.com>
Subject: Re: [PATCH] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2
Date: Sun, 12 Jul 2015 14:51:01 +0800 [thread overview]
Message-ID: <20150712065101.GA14354@localhost> (raw)
In-Reply-To: <1435213498-21025-1-git-send-email-b18965@freescale.com>
On Thu, Jun 25, 2015 at 02:24:58PM +0800, Alison Wang wrote:
> @@ -391,6 +394,85 @@
> reg = <0x0 0x2d24000 0x0 0x4000>;
> };
>
> + enet0: ethernet@2d10000 {
Most of the vendor specific properties below are undocumented bindings.
Shawn
> + compatible = "fsl,etsec2";
> + device_type = "network";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> + model = "eTSEC";
> + fsl,dma-endian-le;
> + fsl,magic-packet;
> + fsl,wake-on-filer;
> + fsl,num_rx_queues = <0x1>;
> + fsl,num_tx_queues = <0x1>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + ranges;
> +
> + queue-group@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x0 0x2d10000 0x0 0x8000>;
> + fsl,rx-bit-map = <0xff>;
> + fsl,tx-bit-map = <0xff>;
> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + };
> +
> + enet1: ethernet@2d50000 {
> + compatible = "fsl,etsec2";
> + device_type = "network";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> + model = "eTSEC";
> + fsl,dma-endian-le;
> + fsl,num_rx_queues = <0x1>;
> + fsl,num_tx_queues = <0x1>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + ranges;
> +
> + queue-group@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x0 0x2d50000 0x0 0x8000>;
> + fsl,rx-bit-map = <0xff>;
> + fsl,tx-bit-map = <0xff>;
> + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + };
> +
> + enet2: ethernet@2d90000 {
> + compatible = "fsl,etsec2";
> + device_type = "network";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> + model = "eTSEC";
> + fsl,dma-endian-le;
> + fsl,num_rx_queues = <0x1>;
> + fsl,num_tx_queues = <0x1>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + ranges;
> +
> + queue-group@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x0 0x2d90000 0x0 0x8000>;
> + fsl,rx-bit-map = <0xff>;
> + fsl,tx-bit-map = <0xff>;
> + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> usb@8600000 {
> compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
> reg = <0x0 0x8600000 0x0 0x1000>;
> --
> 2.1.0.27.g96db324
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2015-07-12 6:51 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-25 6:24 [PATCH] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2 Alison Wang
2015-06-25 6:24 ` Alison Wang
2015-06-25 6:24 ` Alison Wang
2015-07-12 6:51 ` Shawn Guo [this message]
2015-07-12 6:51 ` Shawn Guo
2015-07-13 10:47 ` Manoil Claudiu
2015-07-13 10:47 ` Manoil Claudiu
2015-07-13 10:47 ` Manoil Claudiu
2015-07-13 13:31 ` Shawn Guo
2015-07-13 13:31 ` Shawn Guo
2015-07-13 13:31 ` Shawn Guo
2015-07-13 15:08 ` Manoil Claudiu
2015-07-13 15:08 ` Manoil Claudiu
2015-07-13 15:08 ` Manoil Claudiu
2015-07-14 15:46 ` [PATCH v2] " Claudiu Manoil
2015-07-14 15:46 ` Claudiu Manoil
2015-07-14 15:46 ` Claudiu Manoil
2015-07-14 15:57 ` Fabio Estevam
2015-07-14 15:57 ` Fabio Estevam
2015-07-14 15:57 ` Fabio Estevam
2015-07-14 16:13 ` Manoil Claudiu
2015-07-14 16:13 ` Manoil Claudiu
2015-07-14 16:13 ` Manoil Claudiu
2015-07-14 16:17 ` Fabio Estevam
2015-07-14 16:17 ` Fabio Estevam
2015-07-14 16:17 ` Fabio Estevam
2015-07-27 14:28 ` Shawn Guo
2015-07-27 14:28 ` Shawn Guo
2015-07-27 16:09 ` Manoil Claudiu
2015-07-27 16:09 ` Manoil Claudiu
2015-07-27 16:09 ` Manoil Claudiu
2015-07-28 14:43 ` [PATCH,v3 1/3] doc: dt: Update eTSEC bindings doc Claudiu Manoil
2015-07-28 14:43 ` Claudiu Manoil
2015-07-28 14:43 ` Claudiu Manoil
2015-07-28 14:43 ` [PATCH,v3 2/3] ARM: dts: ls1021a: Add the eTSEC controller nodes Claudiu Manoil
2015-07-28 14:43 ` Claudiu Manoil
2015-07-28 14:43 ` Claudiu Manoil
2015-08-05 11:57 ` Shawn Guo
2015-08-05 11:57 ` Shawn Guo
2015-08-05 11:57 ` Shawn Guo
2015-07-28 14:43 ` [PATCH, v3 3/3] ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR Claudiu Manoil
2015-07-28 14:43 ` [PATCH,v3 " Claudiu Manoil
2015-07-28 14:43 ` Claudiu Manoil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150712065101.GA14354@localhost \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.