All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alison Schofield <amsfield22@gmail.com>
To: Julia Lawall <julia.lawall@lip6.fr>
Cc: outreachy-kernel@googlegroups.com
Subject: Re: [Outreachy kernel] [PATCH] staging: rtl8712: fix comparison test warnings
Date: Mon, 5 Oct 2015 14:38:49 -0700	[thread overview]
Message-ID: <20151005213849.GA3566@Ubuntu-D830> (raw)
In-Reply-To: <alpine.DEB.2.10.1510052136480.2608@hadrien>

On Mon, Oct 05, 2015 at 09:38:28PM +0100, Julia Lawall wrote:
> On Mon, 5 Oct 2015, Alison Schofield wrote:
> 
> > This patch fixes multiple instances of the checkpatch.pl warning:
> >
> > WARNING: Comparisons should place the constant on the right side of the
> > test
> 
> Thanks for the patch, but try to avoid using "fix" in your commit message.
> Say instead what you have done to do the fix.  Here, you could say
> something like "Move constant to the right side of a comparison operator,
> as suggested by checkpatch".
> 
> julia

Thanks for the quick review and I will check that on future patches.
Do I need to amend and resend this one?

alison
> > Signed-off-by: Alison Schofield <amsfield22@gmail.com>
> > ---
> >  drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 20 ++++++++++----------
> >  1 file changed, 10 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
> > index 143be0f..528e9f5 100644
> > --- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
> > +++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
> > @@ -140,7 +140,7 @@ static inline void handle_pairwise_key(struct sta_info *psta,
> >  static inline void handle_group_key(struct ieee_param *param,
> >  				    struct _adapter *padapter)
> >  {
> > -	if (0 < param->u.crypt.idx &&
> > +	if (param->u.crypt.idx > 0 &&
> >  	    param->u.crypt.idx < 3) {
> >  		/* group key idx is 1 or 2 */
> >  		memcpy(padapter->securitypriv.XGrpKey[param->u.crypt.
> > @@ -957,7 +957,7 @@ static int r871x_wx_set_priv(struct net_device *dev,
> >  	if (IS_ERR(ext))
> >  		return PTR_ERR(ext);
> >
> > -	if (0 == strcasecmp(ext, "RSSI")) {
> > +	if (strcasecmp(ext, "RSSI") == 0) {
> >  		/*Return received signal strength indicator in -db for */
> >  		/* current AP */
> >  		/*<ssid> Rssi xx */
> > @@ -974,7 +974,7 @@ static int r871x_wx_set_priv(struct net_device *dev,
> >  		} else {
> >  			sprintf(ext, "OK");
> >  		}
> > -	} else if (0 == strcasecmp(ext, "LINKSPEED")) {
> > +	} else if (strcasecmp(ext, "LINKSPEED") == 0) {
> >  		/*Return link speed in MBPS */
> >  		/*LinkSpeed xx */
> >  		union iwreq_data wrqd;
> > @@ -982,30 +982,30 @@ static int r871x_wx_set_priv(struct net_device *dev,
> >  		int mbps;
> >
> >  		ret_inner = r8711_wx_get_rate(dev, info, &wrqd, extra);
> > -		if (0 != ret_inner)
> > +		if (ret_inner != 0)
> >  			mbps = 0;
> >  		else
> >  			mbps = wrqd.bitrate.value / 1000000;
> >  		sprintf(ext, "LINKSPEED %d", mbps);
> > -	} else if (0 == strcasecmp(ext, "MACADDR")) {
> > +	} else if (strcasecmp(ext, "MACADDR") == 0) {
> >  		/*Return mac address of the station */
> >  		/* Macaddr = xx:xx:xx:xx:xx:xx */
> >  		sprintf(ext, "MACADDR = %pM", dev->dev_addr);
> > -	} else if (0 == strcasecmp(ext, "SCAN-ACTIVE")) {
> > +	} else if (strcasecmp(ext, "SCAN-ACTIVE") == 0) {
> >  		/*Set scan type to active */
> >  		/*OK if successful */
> >  		struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
> >
> >  		pmlmepriv->passive_mode = 1;
> >  		sprintf(ext, "OK");
> > -	} else if (0 == strcasecmp(ext, "SCAN-PASSIVE")) {
> > +	} else if (strcasecmp(ext, "SCAN-PASSIVE") == 0) {
> >  		/*Set scan type to passive */
> >  		/*OK if successful */
> >  		struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
> >
> >  		pmlmepriv->passive_mode = 0;
> >  		sprintf(ext, "OK");
> > -	} else if (0 == strncmp(ext, "DCE-E", 5)) {
> > +	} else if (strncmp(ext, "DCE-E", 5) == 0) {
> >  		/*Set scan type to passive */
> >  		/*OK if successful */
> >  		r8712_disconnectCtrlEx_cmd(padapter
> > @@ -1015,7 +1015,7 @@ static int r871x_wx_set_priv(struct net_device *dev,
> >  			, 5000 /*u32 firstStageTO */
> >  		);
> >  		sprintf(ext, "OK");
> > -	} else if (0 == strncmp(ext, "DCE-D", 5)) {
> > +	} else if (strncmp(ext, "DCE-D", 5) == 0) {
> >  		/*Set scan type to passive */
> >  		/*OK if successfu */
> >  		r8712_disconnectCtrlEx_cmd(padapter
> > @@ -1454,7 +1454,7 @@ static int r8711_wx_get_rate(struct net_device *dev,
> >  		if (ht_cap == true) {
> >  			if (mcs_rate & 0x8000 /* MCS15 */
> >  				&&
> > -				RTL8712_RF_2T2R == rf_type)
> > +				rf_type == RTL8712_RF_2T2R)
> >  				max_rate = (bw_40MHz) ? ((short_GI) ? 300 :
> >  					    270) : ((short_GI) ? 144 : 130);
> >  			else /* default MCS7 */
> > --
> > 2.1.4
> >
> > --
> > You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> > To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> > To post to this group, send email to outreachy-kernel@googlegroups.com.
> > To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20151005183935.GA3350%40Ubuntu-D830.
> > For more options, visit https://groups.google.com/d/optout.
> >


  reply	other threads:[~2015-10-05 21:38 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-05 18:39 [PATCH] staging: rtl8712: fix comparison test warnings Alison Schofield
2015-10-05 20:38 ` [Outreachy kernel] " Julia Lawall
2015-10-05 21:38   ` Alison Schofield [this message]
2015-10-06  4:27     ` Sudip Mukherjee
2015-10-06  4:28       ` Julia Lawall
2015-10-06  7:53 ` Arnd Bergmann
2015-10-06 17:32   ` Alison Schofield

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151005213849.GA3566@Ubuntu-D830 \
    --to=amsfield22@gmail.com \
    --cc=julia.lawall@lip6.fr \
    --cc=outreachy-kernel@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.