From: Wolfram Sang <wsa@the-dreams.de>
To: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org, robh+dt@kernel.org,
robert.jarzmik@free.fr, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
"Jett.Zhou" <jtzhou@marvell.com>, Yi Zhang <yizhang@marvell.com>
Subject: Re: [PATCH-v5 RESEND 3/5] i2c: pxa: Add support for pxa910/988 & new configuration features
Date: Sun, 25 Oct 2015 09:25:02 +0100 [thread overview]
Message-ID: <20151025082502.GB2159@katana> (raw)
In-Reply-To: <1440395978-9065-4-git-send-email-vaibhav.hiremath@linaro.org>
[-- Attachment #1: Type: text/plain, Size: 928 bytes --]
On Mon, Aug 24, 2015 at 11:29:36AM +0530, Vaibhav Hiremath wrote:
> TWSI_ILCR & TWSI_IWCR registers are used to adjust clock rate
> of standard & fast mode in pxa910/988; so this patch adds these two new
> entries to "struct pxa_reg_layout" and "struct pxa_i2c".
>
> As discussed in the previous patch-series, the idea here is to add standard
> DT properties for ilcr and iwcr configuration fields.
> In case of Master ilcr is used for low/high time and in case of slave mode
> of operation iwcr is used for setup/hold time.
>
> Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
> Signed-off-by: Yi Zhang <yizhang@marvell.com>
> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Fixed this checkpatch warning:
CHECK: Please don't use multiple blank lines
#82: FILE: drivers/i2c/busses/i2c-pxa.c:157:
+
+
and applied to for-next, thanks!
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: wsa@the-dreams.de (Wolfram Sang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH-v5 RESEND 3/5] i2c: pxa: Add support for pxa910/988 & new configuration features
Date: Sun, 25 Oct 2015 09:25:02 +0100 [thread overview]
Message-ID: <20151025082502.GB2159@katana> (raw)
In-Reply-To: <1440395978-9065-4-git-send-email-vaibhav.hiremath@linaro.org>
On Mon, Aug 24, 2015 at 11:29:36AM +0530, Vaibhav Hiremath wrote:
> TWSI_ILCR & TWSI_IWCR registers are used to adjust clock rate
> of standard & fast mode in pxa910/988; so this patch adds these two new
> entries to "struct pxa_reg_layout" and "struct pxa_i2c".
>
> As discussed in the previous patch-series, the idea here is to add standard
> DT properties for ilcr and iwcr configuration fields.
> In case of Master ilcr is used for low/high time and in case of slave mode
> of operation iwcr is used for setup/hold time.
>
> Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
> Signed-off-by: Yi Zhang <yizhang@marvell.com>
> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Fixed this checkpatch warning:
CHECK: Please don't use multiple blank lines
#82: FILE: drivers/i2c/busses/i2c-pxa.c:157:
+
+
and applied to for-next, thanks!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151025/384c675e/attachment.sig>
next prev parent reply other threads:[~2015-10-25 8:25 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-24 5:59 [PATCH-v5 RESEND 0/5] i2c: pxa: Add support for PXA910 family of device Vaibhav Hiremath
2015-08-24 5:59 ` Vaibhav Hiremath
2015-08-24 5:59 ` Vaibhav Hiremath
2015-08-24 5:59 ` [PATCH-v5 RESEND 1/5] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa Vaibhav Hiremath
2015-08-24 5:59 ` Vaibhav Hiremath
2015-08-24 5:59 ` [PATCH-v5 RESEND 2/5] i2c: pxa: enable/disable i2c module across msg xfer Vaibhav Hiremath
2015-08-24 5:59 ` Vaibhav Hiremath
[not found] ` <1440395978-9065-3-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-09-11 18:53 ` Wolfram Sang
2015-09-11 18:53 ` Wolfram Sang
2015-09-11 18:53 ` Wolfram Sang
2015-09-14 5:07 ` Vaibhav Hiremath
2015-09-14 5:07 ` Vaibhav Hiremath
2015-10-25 8:21 ` Wolfram Sang
2015-10-25 8:21 ` Wolfram Sang
2015-08-24 5:59 ` [PATCH-v5 RESEND 3/5] i2c: pxa: Add support for pxa910/988 & new configuration features Vaibhav Hiremath
2015-08-24 5:59 ` Vaibhav Hiremath
[not found] ` <1440395978-9065-4-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-09-11 19:06 ` Wolfram Sang
2015-09-11 19:06 ` Wolfram Sang
2015-09-11 19:06 ` Wolfram Sang
2015-09-14 5:28 ` Vaibhav Hiremath
2015-09-14 5:28 ` Vaibhav Hiremath
2015-09-14 5:28 ` Vaibhav Hiremath
2015-10-25 8:40 ` Wolfram Sang
2015-10-25 8:40 ` Wolfram Sang
2015-10-25 8:25 ` Wolfram Sang [this message]
2015-10-25 8:25 ` Wolfram Sang
2015-08-24 5:59 ` [PATCH-v5 RESEND 4/5] Documentation: binding: add sclk adjustment properties to i2c-pxa Vaibhav Hiremath
2015-08-24 5:59 ` Vaibhav Hiremath
[not found] ` <1440395978-9065-5-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-10-25 8:37 ` Wolfram Sang
2015-10-25 8:37 ` Wolfram Sang
2015-10-25 8:37 ` Wolfram Sang
2015-08-24 5:59 ` [PATCH-v5 RESEND 5/5] i2c: pxa: Add ILCR (tLow & tHigh) configuration support Vaibhav Hiremath
2015-08-24 5:59 ` Vaibhav Hiremath
[not found] ` <1440395978-9065-1-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-09-02 6:47 ` [PATCH-v5 RESEND 0/5] i2c: pxa: Add support for PXA910 family of device Vaibhav Hiremath
2015-09-02 6:47 ` Vaibhav Hiremath
2015-09-02 6:47 ` Vaibhav Hiremath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151025082502.GB2159@katana \
--to=wsa@the-dreams.de \
--cc=devicetree@vger.kernel.org \
--cc=jtzhou@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robert.jarzmik@free.fr \
--cc=robh+dt@kernel.org \
--cc=vaibhav.hiremath@linaro.org \
--cc=yizhang@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.